Enhancing biofilm resistance and preserving optical translucency of 3D printed clear aligners through carboxybetaine-copolymer surface treatment.

OBJECTIVES: This study aimed to use a carboxybetaine methacrylate (CBMA) copolymer solution to surface treat 3D printed clear aligners at different fabrication stages, to impart antifouling properties, and assess the surface treatment at various fabrication stages' impact on physico-mechanical characteristics. METHODS: Surface treatments using a blend of 2-hydroxyethyl methacrylate (HEMA) and CBMA, termed CCS, were performed at various stages of 3D printed clear aligner fabrication. Experimental groups, CB1, CB2, and CB3, were determined by the stage of surface treatment during post-processing. CB1, CB2, and CB3 received treatment before post-curing, after post-curing, and after post-processing, respectively. Untreated samples served as controls. Physical and mechanical properties were assessed through tensile testing, Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and UV-Vis spectroscopy. The surface was further characterized through scanning electron microscopy and contact angle measurements. The cytotoxicity was assessed with 7-day elution and agar diffusion assays. Lastly, bacterial biofilm resistance was evaluated using confocal laser scanning microscopy. Crystal violet assay was performed using Streptococcus mutans. RESULTS: Surface treatment during CB1 stage exerted the most significantly unfavorable influence on properties of the 3D printed aligner resin. CB2 samples showed the maximum preservation of translucency even after 7-day aging. CB2 and CB3 phases showed enhanced hydrophilicity of sample surfaces with reduced adhesion of multispecies biofilm and S. mutans. SIGNIFICANCE: Application of CCS surface treatment immediately after post-curing (CB2) can enhance the biofilm resistance of 3D printed clear aligners while maintaining high fidelity to optical translucency and constituent mechanical properties.

Evaluation of the effects of temperature and centrifugation time on elimination of uncured resin from 3D-printed dental aligners.

The study investigated the effects of temperature and centrifugation time on the efficacy of removing uncured resin from 3D-printed clear aligners. Using a photo-polymerizable polyurethane resin (Tera Harz TC-85, Graphy Inc., Seoul, Korea), aligners were printed and subjected to cleaning processes using isopropyl alcohol (IPA) or centrifugation (g-force 27.95g) at room temperature (RT, 23 °C) and high temperature (HT, 55 °C) for 2, 4, and 6 min. The control group received no treatment (NT). Cleaning efficiency was assessed through rheological analysis, weight measurement, transparency evaluation, SEM imaging, 3D geometry evaluation, stress relaxation, and cell viability tests. Results showed increased temperature and longer centrifugation times significantly reduced aligner viscosity, weight (P < 0.05), and transmittance. IPA-cleaned aligners exhibited significantly lower transparency and rougher surfaces in SEM images. All groups met ISO biocompatibility standards in cytotoxicity tests. The NT group had higher root mean square (RMS) values, indicating greater deviation from the original design. Stress relaxation tests revealed over 95% recovery in all groups after 60 min. The findings suggest that a 2-min HT centrifugation process effectively removes uncured resin without significantly impacting the aligners' physical and optical properties, making it a clinically viable option.

Retention efficacy and patient experience with customized clear retainer and wrap-around circumferential retainer among non-extraction orthodontic patients: A 12-month follow-up cohort study.

OBJECTIVE: The aim of this study was to evaluate retention efficacy by assessing retention stability and patient perspectives according to type of circumferential retainer: the wrap-around circumferential retainer (WCR) and customized clear retainer (CCR). MATERIALS AND METHODS: This cohort follow-up study involved 52 patients aged 18-62 who underwent fixed-appliance orthodontic treatment without extractions or orthognathic surgery. Following screening consenting participants were divided into WCR and CCR groups. All participants before follow-up received fixed retainers for the upper and lower anteriors and respective removable retainers within 2 weeks post-debond. Intraoral scans and lateral cephalograms were taken immediately after debonding (T0) and again 12 months later. Dentoalveolar changes in several measurements were compared to evaluate retention efficacy. Surveys were conducted at 1 month (T1) and 12 months (T2) post-debonding to assess changes in patient experiences. Outcome assessments were blinded. Paired T-tests and independent T-tests were used for intragroup and intergroup comparisons of dentoalveolar measurements, respectively. Survey responses were analysed using the Pearson Chi-Square test. RESULTS: The final assessment included 32 participants. Model analysis revealed no significant differences between the groups, except for maxillary intermolar width (p = .033). In the WCR group, the cephalometric analysis indicated a significant increase in the incisor mandibular plane angle (p = .002) and a decrease in the interincisal angle (p = .014), while changes in the CCR group were statistically non-significant. Patient attitude evaluation showed similar trends for wear time and overall satisfaction. However, a higher percentage of respondents in the WCR group reported irritation when wearing the retainers (p = .037) at T1 and discomfort related to speech (p = .038) at T2. CONCLUSIONS: CCR showed better retention efficacy in terms of lower incisor inclination. Patients experienced relatively less irritation and speech discomfort with CCRs.

Genetic polymorphisms linked to extreme postorthodontic external apical root resorption in Koreans.

BACKGROUND: External apical root resorption (EARR) is a common undesirable outcome of orthodontic treatment, this study aimed to identify genetic polymorphisms associated with the susceptibility to extreme orthodontic-induced EARR in a Korean population using extreme phenotype analysis sampling. METHODS: Genomic DNA was isolated from the saliva of 77 patients who underwent orthodontic treatment involving two maxillary premolar extractions. The patients were divided into two groups based on EARR values measured on periapical radiographs: The significant resorption group (SG, EARR ≥ 4 mm) and the normal group (NG, EARR < 2 mm). In the NG group, patients with EARR < 1 mm were named the non-resorption group (NonG). Targeted next-generation sequencing was performed using the screened single nucleotide polymorphisms (SNPs), and firth logistic regression analysis was used to determine genetic associations with EARR. Haplotype-based association analysis was performed for specific SNPs. RESULTS: SNPs related to genes TNFSF11, TNFRSF11B, WNT3A, SFRP2, LRP6, P2RX7, and LRP1 were found to be significantly associated with severe EARR (p < 0.05, pre-Bonferroni correction p-values). Additionally, the haplotype CCA of rs17525809, rs208294, and rs1718119 P2RX7 had a higher frequency in the SG group. CONCLUSION: Extreme phenotype analysis has identified eleven SNPs related to genes TNFSF11, TNFRSF11B, WNT3A, SFRP2, LRP6, P2RX7, and LRP1 that are associated with severe root resorption in the Korean population. These findings will contribute to the development of predictive diagnostic tools for identifying severe root resorption that may occur during orthodontic treatment.

Evaluation of dental plaque reduction using microcurrent-emitting toothbrushes in orthodontic patients: a randomized, double-blind, crossover clinical trial.

This study aimed to compare the effectiveness of microcurrent-emitting toothbrushes (MCTs) and ordinary toothbrushes in reducing the dental plaque index (PI) and dental caries activity among orthodontic patients. The evaluation was performed using a crossover study design involving 22 orthodontic patients randomly assigned to the MCT or ordinary toothbrush groups. The participants used the designated toothbrush for 4 weeks and had a 1-week wash-out time before crossover to the other toothbrush. PI (Attin's index) and dental caries activity were measured at baseline and at the end of each 4-week period. Additionally, patients completed questionnaires to assess patient satisfaction for "freshness in mouth" and "cleansing degree." The results showed that the MCT group had a significant reduction in PI (p = 0.009), whereas the ordinary toothbrush group did not (p = 0.595). There was no significant difference in the dental caries activity between the two groups (p > 0.05). Patient satisfaction assessment revealed that 65% patients in the MCT group had more than "fair" experience of freshness, in contrast to 50% of patients in the ordinary toothbrush group. Satisfaction with cleansing degree was similar in both groups. Overall, these findings suggest that MCTs are more effective in reducing dental PI than ordinary toothbrushes.

Three-dimensional evaluation of dentopalatal changes after rapid maxillary expansion in growing children.

INTRODUCTION: In growing children with transverse malocclusion problems, various types of rapid maxillary expanders (RMEs) have been effectively used in skeletal and dental expansions. We evaluated 3-dimensional dentopalatal changes in growing children who underwent maxillary expansion using RMEs and bonded RMEs. METHODS: We investigated dentopalatal changes in 20 patients treated with bonded RMEs, 19 with RMEs, and 38 control patients. Dental plaster models before and after expansion were scanned 3-dimensionally and superimposed to evaluate transverse expansion, expansion ratio, angular expansion, and palatal expansion height ratio. RESULTS: Using bonded RMEs, similar anterior and posterior dental expansions were achieved with an efficiency of 69%-76% (expansion ratio), and palatal soft-tissue expansion occurred more apically in the posterior area (palatal expansion height ratio, 1.00) than in the anterior area (palatal expansion height ratio, 0.64). Using RMEs, a larger posterior dental expansion was achieved, with an efficiency of 106%-117% (expansion ratio), than anterior dental expansion (55%-60%), and palatal soft-tissue expansion occurred more apically in the posterior area (palatal expansion height ratio, 0.99) than anterior area (palatal expansion height ratio, 0.23). CONCLUSIONS: Dental expansions in the anterior and posterior areas were similar using bonded RMEs, whereas the posterior dental expansions were larger than those of the anterior area using RMEs. The entire palatal soft-tissue slope expanded in the posterior area, whereas the occlusal part expanded in the anterior area using RMEs and bonded RMEs.

Association among craniofacial morphology, ethnicity, and risk of pediatric sleep-related breathing disorders: A multicenter study.

INTRODUCTION: Craniofacial morphology and ethnicity may be risk factors for sleep-related breathing disorder (SRBD) in children but have not yet been assessed in an international multicenter study. The objectives of this study were to assess the association among craniofacial features, self-reported ethnicity, and risk of SRBD in children undergoing orthodontic treatment. METHODS: Children aged 5-18 years who presented for orthodontic evaluation were enrolled in the United States, South Africa, South Korea, Saudi Arabia, and Japan. The risk of SRBD was defined as answering ≥0.33 positive responses to the Pediatric Sleep Questionnaire. Craniofacial features included measurements in sagittal and vertical dimensions to evaluate the cranial base, maxillomandibular and dental relationships, and nasopharyngeal airway dimensions. Logistic regression was performed to assess the association among craniofacial features, ethnicity, age, body mass index, and risk of SRBD. RESULTS: Data were obtained from 602 patients from 5 sites. A total of 76 patients (12.6%) had a risk of SRBD. The mean age was 12.5 years. Male gender (odds ratio [OR], 1.9; 95% confidence interval [CI], 1.0-3.4; P = 0.041), Middle Eastern ethnicity (OR, 10.2; 95% CI, 4.1-25.4; P = 0.001), body mass index (OR, 1.1; 95% CI, 1.04-1.10; P = 0.001), gonial angle (OR, 0.91; 95% CI, 0.85-0.98; P = 0.011), and inferiorly positioned hyoid (OR, 1.1; 95% CI, 1.0-1.2; P = 0.002) were significantly associated with the risk of SRBD. CONCLUSIONS: In an ambidirectional cohort study across 5 sites, male gender, Middle Eastern ethnicity, body mass index, gonial angle, and inferiorly positioned hyoid were associated with the risk of SRBD in children undergoing orthodontic treatment.

Three-dimensional evaluation of a virtual setup considering the roots and alveolar bone in molar distalization cases.

We aimed to evaluate root parallelism and the dehiscence or fenestrations of virtual teeth setup using roots isolated from cone beam computed tomography (CBCT) images. Sixteen patients undergoing non-extraction orthodontic treatment with molar distalization were selected. Composite teeth were created by merging CBCT-isolated roots with intraoral scan-derived crowns. Three setups were performed sequentially: crown setup considering only the crowns, root setup-1 considering root alignment, and root setup-2 considering the roots and surrounding alveolar bone. We evaluated the parallelism and exposure of the roots and compared the American Board of Orthodontics Objective Grading System (ABO-OGS) scores using three-dimensionally printed models among the setups. The mean angulation differences between adjacent teeth in root setups-1 and -2 were significantly smaller than in the crown setup, except for some posterior teeth (p < 0.05). The amount of root exposure was significantly smaller in root setup-2 compared to crown setup and root setup-1 except when the mean exposure was less than 0.6 mm (p < 0.05). There was no significant difference in ABO-OGS scores among the setups. Thus, virtual setup considering the roots and alveolar bone can improve root parallelism and reduce the risk of root exposure without compromising occlusion quality.

Quantitative light-induced fluorescence enables effective detection of orthodontic adhesive residues in diverse environments.

BACKGROUND: Adhesive remnants post-orthodontic treatment might have deleterious effects on oral health, including enamel demineralization, plaque accumulation, and elevated risk of caries development. The aim of this study was to identify and characterize adhesive residues in an ex vivo environment rich in salivary microbiota using quantitative light-induced fluorescence (QLF) technology. METHODS: Disc-shaped adhesive samples with thickness ranging from 800 to 100 µm were prepared using GC Ortho, GOTO, T Orthobond, and Transbond XT and subsequently evaluated utilizing a QLF system. Bovine teeth containing GC Ortho and GOTO adhesives and isolated human premolar teeth bonded with brackets were subjected to a 10-day incubation in an artificial saliva environment. Daily imaging was conducted using QLF during incubation. Data with ΔR > 30% and simple hygiene score (SHS) were obtained with a software for further analysis. RESULTS: Fluorescence intensity exhibited significant differences among the four orthodontic adhesives (p < 0.05). Results of incubation in artificial saliva revealed that red fluorescence surrounding the adhesive on the tooth surface was distinctly observable from day five onwards, with ΔR > 30% and SHS levels higher than those of the control group without adhesive (p < 0.05). Observation of fluorescence images of isolated human premolar teeth with bonded brackets indicated that red fluorescence was primarily present around the brackets. CONCLUSIONS: Application of QLF is efficacious in identifying and demarcating adhesive residues within an environment rich in salivary microbiota.

Correlation of masticatory muscle activity and occlusal function with craniofacial morphology: a prospective cohort study.

OBJECTIVES: Masticatory function, including masticatory muscle activity and occlusal function, can be affected by craniofacial morphology. This study aimed to investigate the relationship between craniofacial morphology and masticatory function in participants who had completed orthodontic treatment at least two years before and had stable occlusion. MATERIALS AND METHODS: Fourty-two healthy participants were prospectively enrolled and divided into three vertical cephalometric groups according to the mandibular plane angle. Masticatory muscle activity (MMA) in the masseter and anterior temporalis muscles was assessed using surface electromyography. The occlusal contact area (OCA) and occlusal force (OF), defined as occlusal function in this study, were evaluated using occlusal pressure mapping system. Masticatory muscle efficiency (MME) was calculated by dividing MMA by OF. The craniofacial morphology was analyzed using a lateral cephalogram. The masticatory function was compared using one-way analysis of variance. Pearson correlations were used to assess relationships between craniofacial morphology and masticatory function. RESULTS: The hypodivergent group had the lowest MMAand the highest MME in the masseter (167.32 ± 74.92 µV and 0.14 ± 0.06 µV/N, respectively) and anterior temporalis muscles (0.18 ± 0.08 µV/N, p < 0.05). MMA in the masseter showed a positive relationship with mandibular plane angle (r = 0.358), whereas OCA (r = -0.422) and OF (r = -0.383) demonstrated a negative relationship (p < 0.05). The anterior temporalis muscle activity negatively correlated with ramus height (r = -0.364, p < 0.05). CONCLUSIONS: Vertical craniofacial morphology was related to masticatory function. Hypodivergent individuals may have low MMA and high occlusal function, resulting in good masticatory muscle efficiency. CLINICAL RELEVANCE: Hypodivergent individuals require careful consideration in orthodontic diagnosis and prosthetic treatment planning.

Reliability and time-based efficiency of artificial intelligence-based automatic digital model analysis system.

OBJECTIVES: To compare the reliability, reproducibility, and time-based efficiency of automatic digital (AD) and manual digital (MD) model analyses using intraoral scan models. MATERIAL AND METHODS: Two examiners analysed 26 intraoral scanner records using MD and AD methods for orthodontic modelling. Tooth size reproducibility was confirmed using a Bland-Altman plot. The Wilcoxon signed-rank test was conducted to compare the model analysis parameters (tooth size, sum of 12-teeth, Bolton analysis, arch width, arch perimeter, arch length discrepancy, and overjet/overbite) for each method, including the time taken for model analysis. RESULTS: The MD group exhibited a relatively larger spread of 95% agreement limits when compared with AD group. The standard deviations of repeated tooth measurements were 0.15 mm (MD group) and 0.08 mm (AD group). The mean difference values of the 12-tooth (1.80-2.38 mm) and arch perimeter (1.42-3.23 mm) for AD group was significantly (P < 0.001) larger than that for the MD group. The arch width, Bolton, and overjet/overbite were clinically insignificant. The overall mean time required for the measurements was 8.62 min and 0.56 min for the MD and AD groups, respectively. LIMITATIONS: Validation results may vary in different clinical cases because our evaluation was limited to mild-to-moderate crowding in the complete dentition. CONCLUSIONS: Significant differences were observed between AD and MD groups. The AD method demonstrated reproducible analysis in a considerably reduced timeframe, along with a significant difference in measurements compared to the MD method. Therefore, AD analysis should not be interchanged with MD, and vice versa.

Comparison of translucency, thickness, and gap width of thermoformed and 3D-printed clear aligners using micro-CT and spectrophotometer.

The present study compared the thickness and gap width of thermoformed and 3D-printed clear aligners (CAs) using micro-computed tomography (micro-CT) and evaluated their translucency using spectrophotometer. Four groups of CAs were tested: thermoformed with polyethylene terephthalate glycol (TS) or copolyester-elastomer combination (TM), and 3D-printed TC-85 cleaned with alcohol (PA) or with centrifuge (PC). CIELab coordinates were measured (n = 10) to evaluate translucency. CAs (n = 10) were fitted onto respective models and micro-CT was performed to evaluate the thickness and gap width. Thickness and gap width were measured for different tooth type and location in sagittal sections on all sides. The PC group showed significantly higher translucency than the PA group, which was similar to the TS and TM groups (p < 0.01). After the manufacturing process, thickness reduction was observed in the thermoformed groups, whereas thickness increase was observed in the 3D printed-groups. The TM group showed the least gap width amongst the groups (p < 0.01). Thermoformed and 3D-printed CAs had significantly varied thicknesses and regions of best fit depending on the tooth type and location. Differences in the translucency and thickness of the 3D-printed CAs were observed depending on the cleaning methods.

Subregional pharyngeal changes after orthognathic surgery in skeletal Class III patients analyzed by convolutional neural networks-based segmentation.

OBJECTIVES: To evaluate the accuracy of fully automatic segmentation of pharyngeal volume of interests (VOIs) before and after orthognathic surgery in skeletal Class III patients using a convolutional neural network (CNN) model and to investigate the clinical applicability of artificial intelligence for quantitative evaluation of treatment changes in pharyngeal VOIs. METHODS: 310 cone-beam computed tomography (CBCT) images were divided into a training set (n = 150), validation set (n = 40), and test set (n = 120). The test datasets comprised matched pairs of pre- and post-treatment images of 60 skeletal Class III patients (mean age 23.1 ± 5.0 years; ANB<-2°) who underwent bimaxillary orthognathic surgery with orthodontic treatment. A 3D U-Net CNNs model was applied for fully automatic segmentation and measurement of subregional pharyngeal volumes of pre-treatment (T0) and post-treatment (T1) scans. The model's accuracy was compared to semi-automatic segmentation outcomes by humans using the dice similarity coefficient (DSC) and volume similarity (VS). The correlation between surgical skeletal changes and model accuracy was obtained. RESULTS: The proposed model achieved high performance of subregional pharyngeal segmentation on both T0 and T1 images, representing a significant T1-T0 difference of DSC only in the nasopharynx. Region-specific differences amongst pharyngeal VOIs, which were observed at T0, disappeared on the T1 images. The decreased DSC of nasopharyngeal segmentation after treatment was weakly correlated with the amount of maxillary advancement. There was no correlation between the mandibular setback amount and model accuracy. CONCLUSIONS: The proposed model offers fast and accurate subregional pharyngeal segmentation on both pre-treatment and post-treatment CBCT images in skeletal Class III patients. CLINICAL SIGNIFICANCE: We elucidated the clinical applicability of the CNNs model to quantitatively evaluate subregional pharyngeal changes after surgical-orthodontic treatment, which offers a basis for developing a fully integrated multiclass CNNs model to predict pharyngeal responses after dentoskeletal treatments.

Skeletal and dentoalveolar effects of miniscrew-assisted rapid palatal expansion based on the length of the miniscrew: a randomized clinical trial.

OBJECTIVES: To compare skeletal and dentoalveolar changes of miniscrew-assisted rapid palatal expansion (MARPE) according to the length of the miniscrews. MATERIALS AND METHODS: This two-arm parallel-randomized controlled trial included 32 adult patients aged 19-35 years who received orthodontic treatment with MARPE. Patients were allocated to two groups, group long (L) and short (S), through block randomization according to the length of the miniscrews installed in MARPE. Cone-beam computed tomography was performed before expansion and after removal of the MARPE; superimposition of the images was conducted. The primary outcome included the amount of bone expansion and the change in the inclination of the anchorage teeth. The secondary outcome included the success rate of midpalatal suture opening and stability of the miniscrews. Blinding was performed during outcome assessment. RESULTS: The final sample comprised 31 patients. There was no significant difference in patient characteristics between group L (n = 16) and group S (n = 15). The change in the width of the processus zygomaticus (P = .010) and ectocanine (P = .001) was significantly higher in group L. A significantly higher success rate of the posterior miniscrews was seen in group L (P = .024). There was no statistically significant difference in the success rate of suture separation or change in tooth inclination. Notable complications were not reported. CONCLUSIONS: MARPE with longer miniscrews can increase the amount of expansion of the maxillary basal bone and canine alveolar bone. Although it also aided in miniscrew stability, it did not guarantee successful midpalatal suture separation.

Reorientation methodology for reproducible head posture in serial cone beam computed tomography images.

Low dose and accessibility have increased the application of cone beam computed tomography (CBCT). Often serial images are captured for patients to diagnose and plan treatment in the craniofacial region. However, CBCT images are highly variable and lack harmonious reproduction, especially in the head's orientation. Though user-defined orientation methods have been suggested, the reproducibility remains controversial. Here, we propose a landmark-free reorientation methodology based on principal component analysis (PCA) for harmonious orientation of serially captured CBCTs. We analyzed three serial CBCT scans collected for 29 individuals who underwent orthognathic surgery. We first defined a region of interest with the proposed protocol by combining 2D rendering and 3D convex hull method, and identified an intermediary arrangement point. PCA identified the y-axis (anterioposterior) followed by the secondary x-axis (transverse). Finally, by defining the perpendicular z-axis, a new global orientation was assigned. The goodness of alignment (Hausdorff distance) showed a marked improvement (> 50%). Furthermore, we clustered cases based on clinical asymmetry and validated that the protocol was unaffected by the severity of the skeletal deformity. Therefore, it could be suggested that integrating the proposed algorithm as the preliminary step in CBCT evaluation will address a fundamental step towards harmonizing the craniofacial imaging records.

Skin irritation in children undergoing orthodontic facemask therapy.

Orthodontic facemasks are extraoral orthodontic appliances that influence maxillary and mandibular development in children with skeletal Class III malocclusion. While a facemask is most effective in patients before the growth spurt, skin irritation is common during the treatment. Therefore, this retrospective study aimed to investigate the prevalence and pattern of such skin changes and identify their possible associated risk factors. We included 177 patients with skeletal Class III malocclusion who underwent facemask therapy. Patient age and sex, orthodontic parameters expressing the severity of malocclusion, the presence of complaints in the temporomandibular joint (TMJ) areas, and the level of patient cooperation were evaluated. Additionally, the severity and onset time of skin reactions were further analyzed. The results indicated that 43.5% of patients developed skin changes typical of irritant contact dermatitis. Skin irritation was significantly associated with the presence of TMJ complaints and female sex. Furthermore, skin irritation was more common in younger patients. Clinicians should pay special attention to the skin areas that come into contact with the appliance during each follow-up visit to detect potential problems. Moreover, patients and their parents should be given adequate information about the possibility, prevention, and management of skin problems during facemask therapy.

Cerium oxide nanozymes confer a cytoprotective and bio-friendly surface micro-environment to methacrylate based oro-facial prostheses.

Poly-(methyl methacrylate) (PMMA) is the preferred biomaterial for orofacial prostheses used for the rehabilitation of naso-palatal defects. However, conventional PMMA has limitations determined by the complexity of the local microbiota and the friability of oral mucosa adjacent to these defects. Our purpose was to develop a new type of PMMA, i-PMMA, with good biocompatibility and better biological effects such as higher resistance to microbial adhesion of multiple species and enhanced antioxidant effect. The addition of cerium oxide nanoparticles to PMMA using a mesoporous nano-silica carrier and polybetaine conditioning, resulted in an increased release of cerium ions and enzyme mimetic activity, without tangible loss of mechanical properties. Ex vivo experiments confirmed these observations. In stressed human gingival fibroblasts, i-PMMA reduced the levels of reactive oxygen species and increased the expression of homeostasis-related proteins (PPARg, ATG5, LCI/III). Furthermore, i-PMMA increased the levels of expression of superoxide dismutase and mitogen-activated protein kinases (ERK and Akt), and cellular migration. Lastly, we demonstrated the biosafety of i-PMMA using two in vivo models: skin sensitization assay and oral mucosa irritation test, respectively. Therefore, i-PMMA offers a cytoprotective interface that prevents microbial adhesion and attenuates oxidative stress, thus supporting physiological recovery of the oral mucosa.

Multistability and hysteresis in states of oral microbiota: Is it impacting the dental clinical cohort studies?

INTRODUCTION: Microbiome from a "healthy cohort" is used as a reference for comparison to cases and intervention. However, the studies with cohort-based clinical research have not sufficiently accounted for the multistability in oral microbial community. The screening is limited to phenotypic features with marked variations in microbial genomic markers. Herein, we aimed to assess the stability of the oral microbiome across time from an intervention-free "healthy" cohort. METHODS: We obtained 33 supragingival samples of 11 healthy participants from the biobank. For each participant, we processed one sample as baseline (T0) and two samples spaced at 1-month (T1) and 3-month (T2) intervals for 16S ribosomal RNA gene sequencing analysis. RESULTS: We observed that taxonomic profiling had a similar pattern of dominant genera, namely, Rothia, Prevotella, and Hemophilus, at all time points. Shannon diversity revealed a significant increase from T0 (p < .05). Bray Curtis dissimilarity was significant (R = -.02, p < .01) within the cohort at each time point. Community stability had negative correlation to synchrony (r = -.739; p = .009) and variance (r = -.605; p = .048) of the species. Clustering revealed marked differences in the grouping patterns between the three time points. For all time points, the clusters presented a substantially dissimilar set of differentially abundant taxonomic and functional biomarkers. CONCLUSION: Our observations indicate towards the presence of multistable states within the oral microbiome in an intervention-free healthy cohort. For a conclusive and meaningful long-term reference, dental clinical research should account for multistability in the personalized therapy approach to improve the identification and classification of reliable markers.

Changes in mechanical and bacterial properties of denture base resin following nanoceria incorporation with and without SBA-15 carriers.

Poly (methyl methacrylate) (PMMA) is a commonly used material for the fabrication of biomedical appliances. Although PMMA has several advantages, it is susceptible to microbial insults with practical use. Therefore, different bioactive nanomaterials, such as nanoceria (CeN), have been proposed to enhance the properties of PMMA. In this study, we investigated the effect of the incorporation of CeN into PMMA with and without the use of mesoporous silica nanoparticle (SBA-15) carriers. The unmodified PMMA specimens (control, CTRL) were compared to groups containing SBA-15, CeN, and the synthesized SBA-15 impregnated with CeN (SBA-15@CeN) at different loading percentages. The mechanical and physical properties of the different SBA-15@CeN groups and their effects on cell viability were investigated, and the optimal CeN concentration was identified accordingly. Our results revealed that flexural strength was significantly (P < 0.01) reduced in the SBA-15@CeN3× group (containing 3-fold the CeN wt. %). Although the surface microhardness increased with the increase in the wt. % of SBA-15@CeN, cell viability was significantly reduced (P < 0.001). The SBA-15@CeN1× group had the optimal concentration and displayed significant resistance to single-and multispecies microbial colonization. Finally, the enzymatic activity of CeN was significantly high in the SBA-15@CeN1× group. The proinflammatory markers (IL-6, IL-1ß, TNF-α, CD80, and CD86) showed a significant (P < 0.001) multifold reduction in lipopolysaccharide-induced RAW cells treated with a 5-day eluate of the SBA-15@CeN1× group. These results indicate that the addition of SBA-15@CeN at 1.5 wt % improves the biological response of PMMA without compromising its mechanical properties.