Low temperature Cu-Cu direct bonding in air ambient by ultrafast surface grain growth.

Fine-grain copper (Cu) films (grain size: 100.36 nm) with a near-atomic-scale surface (0.39 nm) were electroplated. Without advanced post-surface treatment, Cu-Cu direct bonding can be achieved with present-day fine-grain Cu films at 130℃ in air ambient with a minimum pressure of 1 MPa. The instantaneous growth rate on the first day is 164.29 nm d-1. Also, the average growth rate (∆R/∆t) is evaluated by the present experimental results: (i) 218.185 nm d-1 for the first-day period and (ii) 105.58 nm d-1 during the first 14-day period. Ultrafast grain growth and near-atomic-scale surface facilitate grain boundary motion across the bonding interface, which is the key to achieve Cu-Cu direct bonding at 130℃ in air ambient.

Characterizing emission factors and oxidative potential of motorcycle emissions in a real-world tunnel environment.

Transportation emissions significantly affect human health, air quality, and climate in urban areas. This study conducted experiments in an urban tunnel in Taipei, Taiwan, to characterize vehicle emissions under real driving conditions, providing emission factors of PM2.5, eBC, CO, and CO2. By applying multiple linear regression, it derives individual emission factors for heavy-duty vehicles (HDVs), light-duty vehicles (LDVs), and motorcycles (MCs). Additionally, the oxidative potential using dithiothreitol assay (OPDTT) was established to understand PM2.5 toxicity. Results showed HDVs dominated PM2.5 and eBC concentrations, while LDVs and MCs influenced CO and CO2 levels. The CO emission factor for transportation inside the tunnel was found to be higher than those in previous studies, likely owing to the increased fraction of MCs, which generally emit higher CO levels. Among the three vehicle types, HDVs exhibited the highest PM2.5 and eBC emission factors, while CO and CO2 levels were relatively higher for LDVs and MCs. The OPDTTm demonstrated that fresh traffic emissions were less toxic than aged aerosols, but higher OPDTTv indicated the impact on human health cannot be ignored. This study updates emission factors for various vehicle types, aiding in accurate assessment of transportation emissions' effects on air quality and human health, and providing a guideline for formulating mitigation strategies.

Particulate matter in a motorcycle-dominated urban area: Source apportionment and cancer risk of lung deposited surface area (LDSA) concentrations.

Source-apportioned particle concentrations are necessary to properly evaluate the health impacts of air pollution. In this study, a measurement station was established at an urban roadside in northern Taiwan to the investigate lung deposited surface area (LDSA) concentration, a relevant metric for the adverse health effects of aerosol exposure, along with PM1 and equivalent black carbon (eBC) concentrations, particle number concentration (PNC), and particle size distribution (PSD). Through positive matrix factorization and multi-linear regression analysis, we attributed 57% of LDSA to traffic emissions over the entire study. During rush hour, the motorcycle fraction increased to 0.83 and LDSA (77.6 ± 9.9 µm2/cm3) and PNC (14,000 ± 2400 particles/cm3) values peaked, while 74% of LDSA was attributed to traffic. The LDSA ratio, defined as the ratio of measured LDSA to that estimated from the particle size distribution with a spherical assumption, also increased, highlighting the greater degree of fractal morphology during rush hour. The relationship between LDSA emitted by traffic and PNC yielded a higher r2 (0.92) than the r2 between traffic LDSA and eBC (0.82). Finally, the excess lifetime cancer risk linked with traffic emission was 1.56 × 10-4 (i.e. 15.6 excess cancer cases for a population of 100,000 people) based on the LDSA apportionment results.

Utilization of Personalized Machine-Learning to Screen for Dysglycemia from Ambulatory ECG, toward Noninvasive Blood Glucose Monitoring.

Blood glucose (BG) monitoring is important for critically ill patients, as poor sugar control has been associated with increased mortality in hospitalized patients. However, constant BG monitoring can be resource-intensive and pose a healthcare burden in clinical practice. In this study, we aimed to develop a personalized machine-learning model to predict dysglycemia from electrocardiogram (ECG) data. We used the Medical Information Mart for Intensive Care III database as our source of data and obtained more than 20 ECG records from each included patient during a single hospital admission. We focused on lead II recordings, along with corresponding blood sugar data. We processed the data and used ECG features from each heartbeat as inputs to develop a one-class support vector machine algorithm to predict dysglycemia. The model was able to predict dysglycemia using a single heartbeat with an AUC of 0.92 ± 0.09, a sensitivity of 0.92 ± 0.10, and specificity of 0.84 ± 0.04. After applying 10 s majority voting, the AUC of the model's dysglycemia prediction increased to 0.97 ± 0.06. This study showed that a personalized machine-learning algorithm can accurately detect dysglycemia from a single-lead ECG.

Chitosan-Based Anti-Oxidation Delivery Nano-Platform: Applications in the Encapsulation of DHA-Enriched Fish Oil.

Refined cobia liver oil is a nutritional supplement (CBLO) that is rich in polyunsaturated fatty acids (PUFAs), such as DHA and EPA; however, PUFAs are prone to oxidation. In this study, the fabrication of chitosan-TPP-encapsulated CBLO nanoparticles (CS@CBLO NPs) was achieved by a two-step method, including emulsification and the ionic gelation of chitosan with sodium tripolyphosphate (TPP). The obtained nanoparticles were inspected by dynamic light scattering (DLS) and showed a positively charged surface with a z-average diameter of between 174 and 456 nm. Thermogravimetric analysis (TGA) results showed the three-stage weight loss trends contributing to the water evaporation, chitosan decomposition, and CBLO decomposition. The loading capacity (LC) and encapsulation efficiency (EE) of the CBLO loading in CS@CBLO NPs were 17.77-33.43% and 25.93-50.27%, respectively. The successful encapsulation of CBLO in CS@CBLO NPs was also confirmed by the Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) techniques. The oxidative stability of CBLO and CS@CBLO NPs was monitored by FTIR. As compared to CBLO, CS@CBLO NPs showed less oxidation with a lower generation of hydroperoxides and secondary oxidation products after four weeks of storage. CS@CBLO NPs are composed of two ingredients that are beneficial for health, chitosan and fish oil in a nano powdered fish oil form, with an excellent oxidative stability that will enhance its usage in the functional food and pharmaceutical industries.