A biomimetic MoFe-NC for efficient N2 electroreduction to NH3.

A binary Mo/Fe-nitrogen-carbon material (MoFe-NC) catalyst was synthesized following the concept of biological nitrogen fixation. The MoFe-NC catalyst demonstrated a maximum N2 reduction faradaic efficiency of 39.9% and a NH3 yield rate of 28.5 µg mgcat-1 h-1 under ambient conditions.

Effects of Various Valence Ions on an Aqueous Rechargeable Zn//Polyaniline-coated ZnMn2 O4 Battery.

Zinc corrosion and dendrite formation are the main issues which impede the performance of aqueous zinc ion batteries (ZIBs) after certain times. In this work, we systematically investigated the effects of three different valence ions (e. g., Na+ , Mg2+ , Al3+ ) as electrolyte additives on the suppression of zinc corrosion and the inhibition of dendrite growth. By combining experiments and theoretical calculations, it has been found that the existence of Na+ ions effectively suppressing the zinc dendrite growth because Na+ possessess high adsorption energy approximately -0.39 eV. Moreover, Na+ ions could lengthen the zinc dendrite formation duration up to 500 h. On the other hand, the PANI/ZMO cathode materials showed the small band gap approximately 0.097 eV, signifying that the PANI/ZMO possessed the semiconductor characteristics. Furthermore, an assembled Zn//PANI/ZMO/GNP full battery using Na+ ions as electrolyte additive displayed capacity retention of 90.2 % after 500 cycles at 0.2 A g-1 , whereas the capacity retention of the control battery using pure ZnSO4 electrolyte was only 58.2 %. This work could provide a reference for the selection of electrolyte additives in future batteries.

Electrochemical heavy metal removal from water using PVC waste-derived N, S co-doped carbon materials.

The removal of heavy metal contaminants has aroused global attention due to water shortage and the lax control on the discharge of heavy metal pollutants. Capacitive deionization (CDI) has emerged as a robust, energy-/cost-efficient technique for water treatment. Herein, we reported the simple synthesis of N, S-co-doped carbon materials (NS-C) derived from PVC plastic wastes as CDI electrode materials for the efficient removal of heavy metal ions (HMIs). The NS-C exhibited a large specific surface area (∼1230 m2 g-1) and contained heavy heteroatom doping (∼4.55 at% N and ∼13.30 at% S). The CDI electrode fabricated using NS-C showed high removal efficiency (94-99%), high capacity (36-62 mg g-1), and good regeneration capability for the adsorption of various kinds of low-concentration heavy metal ions (including Fe2+, Co2+, Ni2+, Cu2+, Pb2+, and Cd2+). Moreover, PVC plastic wastes that are heavily accumulated in the environment and extremely hard to be decomposed and recycled were applied as the carbon source in this study for the fabrication of NS-C, which further rendered the importance of our study in practically treating hazardous waste (HMIs) with waste (PVC plastic wastes) in a clean and efficient way.

Protective effects of Schisandrin on high glucose-induced changes of RhoA and eNOS activity in human umbilical vein endothelial cells.

Schisandrin, derived from the Chinese medicinal herb Schisandra chinensis, has been found to confer protective effects on circulation systems. But the underlying molecular mechanisms remain unclear. The aim of this study was to investigate the effects of a high level of glucose on RhoA and eNOS activity in human umbilical vein endothelial cells(HUVECs) and how Schisandrin plays a role in mediating these effects. To find the optimal treatment time, HUVECs were cultured at a high glucose concentration (30 mM) for different lengths of time (0, 12, 24, and 48 h). Subsequently, the cells were randomized into five groups: a normal group, a high glucose group, and three high glucose groups that were given different doses (5, 10, and 20 µM) of Schisandrin. The cells were pretreated with Schisandrin for 24 h before stimulation with high glucose. The morphology of HUVECs in the various groups was assessed under a light microscope. Immunocytochemical staining was used to detect the level of p-MYPT1 expression. The levels of RhoA activity were determined using the RhoA Activation Assay Biochem Kit. The levels of eNOS activity were examined using a nitrate reduction test. The results showed that in the high glucose group, the activity of RhoA was increased and the activity of eNOS was reduced, thus decreasing the secretion of NO. However, after pretreatment with Schisandrin (10, 20 µM), the activity of RhoA was inhibited and the activity of eNOS increased, which led to an increase in NO production compared with the high glucose group. There was no evident difference between the 5 µM Schisandrin group and the high glucose group. Taken together, these findings indicate that Schisandrin can improve the function of endothelial cells by lowering the activity of RhoA/Rho kinase and raising both the activity of eNOS and the production of NO.

Polyvinylchloride-derived N, S co-doped carbon as an efficient sulfur host for high-performance Li-S batteries.

The intrinsic polysulfide shuttle in lithium-sulfur (Li-S) batteries have significantly limited their practical applications. Conductive carbon materials with heteroatom doping and rich porosity is the most common strategy for the effective prevention of polysulfide shuttle, but are usually obtained with high costs and tedious procedures. Herein, we managed to obtain highly porous N, S-codoped carbon materials (NS-C) through treating waste plastic of polyvinylchloride (PVC) with KOH. The resulting NS-C was revealed to be highly efficient hosts for sulfur cathode, achieving large reversible capacities of 1205 mA h g-1 and 836 mA h g-1 at 0.1C and 1.0C, respectively, and remaining at 550 mA h g-1 after 500 cycles at 1C rate, showing an outstanding cycling stability. The significantly enhanced cycling performance was mainly ascribed to both the hierarchically porous structure and heavy N, S co-dopants, which respectively provided physical blocks and chemical affinity for the efficient immobilization of intermediate lithium polysulfides. The results provide an effective paradigm in the surface chemistry and sulfur cathode materials design for high-performance Li-S batteries and a new application for recycled plastic waste.

Aligned N-doped carbon nanotube bundles with interconnected hierarchical structure as an efficient bi-functional oxygen electrocatalyst.

The fabrication of cost effective and efficient electrocatalysts with functional building blocks to replace noble metal ones is of great importance for energy related applications yet remains a great challenge. Herein, we report the fabrication of a hierarchical structure containing CNTs/graphene/transition-metal hybrids (h-NCNTs/Gr/TM) with excellent bifunctional oxygen electrocatalytic activity. The synthesis was rationally designed by the growth of shorter nitrogen-doped CNTs (S-NCNTs) on longer NCNTs arrays (L-NCNTs), while graphene layers were in situ generated at their interconnecting sites. The hybrid material shows excellent OER and ORR performance, and was also demonstrated to be a highly active bifunctional catalyst for Zn-air batteries, which could be due to rapid electron transport and full exposure of active sites in the hierarchical structure.

Polymer Dehalogenation-Enabled Fast Fabrication of N,S-Codoped Carbon Materials for Superior Supercapacitor and Deionization Applications.

Doped carbon materials (DCM) with multiple heteroatoms hold broad interest in electrochemical catalysis and energy storage but require several steps to fabricate, which greatly hinder their practical applications. In this study, a facile strategy is developed to enable the fast fabrication of multiply doped carbon materials via room-temperature dehalogenation of polyvinyl dichloride (PVDC) promoted by KOH with the presence of different organic dopants. A N,S-codoped carbon material (NS-DCM) is demonstratively synthesized using two dopants (dimethylformamide for N doping and dimethyl sulfoxide for S doping). Afterward, the precursive room-temperature NS-DCM with intentionally overdosed KOH is submitted to inert annealing to obtain large specific surface area and high conductivity. Remarkably, NS-DCM annealed at 600 °C (named as 600-NS-DCM), with 3.0 atom % N and 2.4 atom % S, exhibits a very high specific capacitance of 427 F g-1 at 1.0 A g-1 in acidic electrolyte and also keeps ∼60% of capacitance at ultrahigh current density of 100.0 A g-1. Furthermore, capacitive deionization (CDI) measurements reveal that 600-NS-DCM possesses a large desalination capacity of 32.3 mg g-1 (40.0 mg L-1 NaCl) and very good cycling stability. Our strategy of fabricating multiply doped carbon materials can be potentially extended to the synthesis of carbon materials with various combinations of heteroatom doping for broad electrochemical applications.

The disinfection performance and mechanisms of Ag/lysozyme nanoparticles supported with montmorillonite clay.

The fabrication of montmorillonite (Mt) decorated with lysozyme-modified silver nanoparticles (Ag/lyz-Mt) was reported. The lysozyme (lyz) was served as both reducing and capping reagent. Coupling the bactericidal activity of the lyz with AgNPs, along with the high porous structure and large specific surface area of the Mt, prevented aggregation of AgNPs and promoted nanomaterial-bacteria interactions, resulting in a greatly enhanced bactericidal capability against both Gram positive and Gram negative bacteria. This paper systematically elucidated the bactericidal mechanisms of Ag/lyz-Mt. Direct contact between the Ag/lyz-Mt surface and the bacterial cell was essential to the disinfection. Physical disruption of bacterial membrane was considered to be one of the bactericidal mechanisms of Ag/lyz-Mt. Results revealed that Ag(+) was involved in the bactericidal activity of Ag/lyz-Mt via tests conducted using Ag(+) scavengers. A positive ROS (reactive oxygen species) scavenging test indirectly confirmed the involvement of ROS (O2(-), H2O2, and OH) in the bactericidal mechanism. Furthermore, the concentrations of individual ROS were quantified. Results showed that Ag/lyz-Mt nanomaterial could be a promising bactericide for water disinfection.

Antibacterial properties and mechanism of graphene oxide-silver nanocomposites as bactericidal agents for water disinfection.

Providing clean and affordable drinking water without harmful disinfection byproducts generated by conventional chemical disinfectants gives rise to the need for technological innovation. Nanotechnology has great potential in purifying water and wastewater treatment. A graphene oxide-silver (GO-Ag) nanocomposite with excellent antibacterial activity was prepared and characterized by transmission electron microscope and X-ray photoelectron spectroscopy. The tests were carried out using Escherichia coli and Staphylococcus aureus as model strains of Gram-negative and Gram-positive bacteria, respectively. The effect of bactericide dosage and pH on antibacterial activity of GO-Ag was examined. Morphological observation of bacterial cells by scanning electron microscope showed that GO-Ag was much more destructive to cell membrane of Escherichia coli than that of Staphylococcus aureus. Experiments were carried out using catalase, superoxide dismutase and sodium thioglycollate to investigate the formation of reactive oxygen species and free silver ions in the bactericidal process. The activity of intracellular antioxidant enzymes was measured to investigate the potential role of oxidative stress. According to the consequence, synergetic mechanism including destruction of cell membranes and oxidative stress accounted for the antibacterial activity of GO-Ag nanocomposites. All the results suggested that GO-Ag nanocomposites displayed a good potential for application in water disinfection.

Luteolin rescues pentylenetetrazole-induced cognitive impairment in epileptic rats by reducing oxidative stress and activating PKA/CREB/BDNF signaling.

Most antiepileptic drugs (AEDs) interfere with cognitive function, and there is therefore an urgent need for AEDs that are effective but do not have this side effect. Various studies have reported the antiinflammatory and cytoprotective properties of the natural flavonoid luteolin (LU); however, none has examined systematically its antiseizure potential. The current study investigated the effects of LU on pentylenetetrazole (PTZ)-induced cognitive impairment in rats and the underlying mechanisms. Seizures were induced in rats by daily injection of PTZ for 36 days. Two other groups were pretreated with LU (50 or 100 mg/kg/day by oral administration) 30 min prior to PTZ administration. Seizure severity was scored, and cognitive function was tested in the Morris water maze. Neuronal damage, mitochondrial generation of reactive oxygen species, oxidative stress, phosphoactivation of the protein kinase A (PKA)-cyclic AMP response element-binding protein (CREB) pathway, and brain-derived neurotrophic factor (BDNF) expression were measured in the hippocampus. Pretreatment with LU suppressed seizure induction, duration, and severity following PTZ injection, reversed cognitive impairment, reduced neuronal and oxidative stress damage, and increased phosphoactivation of PKA and CREB as well as BDNF expression. These results indicate that LU should be further investigated as a treatment for epilepsy.

Magnetic chitosan-graphene oxide composite for anti-microbial and dye removal applications.

Magnetic chitosan-graphene oxide (MCGO) nanocomposite was prepared as a multi-functional nanomaterial for the applications of antibacterial and dye removal. The nanocomposite was characterized by scanning electronic microscope (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier transform infrared spectrometer (FTIR). The antibacterial performance for MCGO against Escherichia coli was varied depending on the concentration of MCGO. SEM images of E. coli cells demonstrated that the antimicrobial performance of MCGO nanocomposite was possibly due to the damage of cell membrane. This work also explored MCGO's adsorption performance for methyl orange (MO). The experimental parameters including adsorbent mass, pH value, contact time and concentration of MO on the adsorption capacity were investigated. The maximum adsorption capacity of MCGO for MO was 398.08 mg/g. This study showed that the MCGO offered enormous potential applications for water treatment.