RESUMEN
BaTiO3 octahedra, edge-, and corner-truncated cubes, and cubes with four tunable sizes from 132 to 438 nm are synthesized by a solvothermal growth approach. Acetic acid treatment can cleanly remove BaCO3 impurity. Rietveld refinement of X-ray diffraction patterns and Raman spectra help to confirm the particles have a tetragonal crystal structure. The crystals also exhibit size- and facet-dependent bandgap shifts. BaTiO3 octahedra show larger piezoelectric, ferroelectric, and pyroelectric effects than truncated cubes and cubes. The measured dielectric constant differences should be associated with their various facet-dependent behaviors. Piezoelectric nanogenerators fabricated from BaTiO3 octahedra consistently show the best performance than those containing truncated cubes and cubes. In particular, a nanogenerator with 30 wt.%-incorporated octahedra displays an open-circuit voltage of 23 V and short-circuit current of 324 nA. The device performance is also highly stable. The maximum output power reaches 3.9 µW at 60 MΩ. The fabricated nanogenerator can provide sufficient electricity to power light-emitting diodes. This work further demonstrates that various physical properties of semiconductor crystals show surface dependence.
RESUMEN
Given the huge economic burden caused by chronic and acute diseases on human beings, it is an urgent requirement of a cost-effective diagnosis and monitoring process to treat and cure the disease in their preliminary stage to avoid severe complications. Wearable biosensors have been developed by using numerous materials for non-invasive, wireless, and consistent human health monitoring. Graphene, a 2D nanomaterial, has received considerable attention for the development of wearable biosensors due to its outstanding physical, chemical, and structural properties. Moreover, the extremely flexible, foldable, and biocompatible nature of graphene provide a wide scope for developing wearable biosensor devices. Therefore, graphene and its derivatives could be trending materials to fabricate wearable biosensor devices for remote human health management in the near future. Various biofluids and exhaled breath contain many relevant biomarkers which can be exploited by wearable biosensors non-invasively to identify diseases. In this article, we have discussed various methodologies and strategies for synthesizing and pattering graphene. Furthermore, general sensing mechanism of biosensors, and graphene-based biosensing devices for tear, sweat, interstitial fluid (ISF), saliva, and exhaled breath have also been explored and discussed thoroughly. Finally, current challenges and future prospective of graphene-based wearable biosensors have been evaluated with conclusion. Graphene is a promising 2D material for the development of wearable sensors. Various biofluids (sweat, tears, saliva and ISF) and exhaled breath contains many relevant biomarkers which facilitate in identify diseases. Biosensor is made up of biological recognition element such as enzyme, antibody, nucleic acid, hormone, organelle, or complete cell and physical (transducer, amplifier), provide fast response without causing organ harm.
Asunto(s)
Técnicas Biosensibles , Líquidos Corporales , Grafito , Dispositivos Electrónicos Vestibles , Biomarcadores , Técnicas Biosensibles/métodos , Grafito/química , HumanosRESUMEN
The abundance of water on earth provides a large window to utilize the mechanical energy within river currents and ocean waves. In this regard, hydropower harvesting through solid-liquid contact electrification has received considerable interest in the recent past. Despite advancements in nanotechnology, liquid energy harvesting devices, especially solid-liquid triboelectric nanogenerators (S-L TENGs), require efficient engineering of the interfacial properties of their substrates to transfer liquid mass and momentum rapidly with the effective generation/transfer of surface charges. To face this challenge, several parameters such as the selection of material, surface morphology and surface properties are currently being studied to develop a better system architecture for energy harvesting and self-powered application platforms with three different interacting modes of liquid contact. Moreover, several parameters of the contact solvents such as the ionic activity and polarity have been studied to understand the practical applicability of S-L TENGs to harvest energy from different natural and artificial resources. In addition, the scope of harvesting mechanical energy from other volatile organic compounds has been studied recently. Self-powered applications of S-L TENGs in various fields have also been demonstrated by different research groups. This work reviews recent progress in the development of S-L TENGs for the first time in terms of the different properties of solid and liquid contact materials along with their respective applications. Furthermore, the work concludes with perspectives, future opportunities, and major challenges of fabricating S-L TENGs as an efficient energy harvester.
RESUMEN
Ultrasensitive and highly accurate bioassays are critically required for the early detection of various biomarkers and diagnosis of cancer. Electrogenerated chemiluminescence (ECL) is one such technique which shows powerful analytical ability by incorporating ECL active species for sensitive detection of targets. In this regard, the development of ECL as an assay technique is constantly being pushed for better performance and lower detection limits. Incorporation of sensitive immunosensing and aptasensing methods with ECL has the ability to multiply the advantages several-fold. The recent progress in and methods utilized for the enhancement and amplification of ECL detection techniques based on highly sensitive immunosensors and aptasensors have been discussed in this review with regard to widely popular techniques.
Asunto(s)
Técnicas Biosensibles , Luminiscencia , Mediciones Luminiscentes , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
Digital microfluidic (DMF) platforms have contributed immensely to the development of multifunctional lab-on-chip systems for performing complete sets of biological and analytical assays. Electrowetting-on-dielectric (EWOD) technology, due to its outstanding flexibility and integrability, has emerged as a promising candidate for such lab-on-chip applications. Triggered by an electrical stimulus, EWOD devices allow precise manipulation of single droplets along the designed electrode arrays without employing external pumps and valves, thereby enhancing the miniaturization and portability of the system towards transcending important laboratory assays in resource-limited settings. In recent years, the simple fabrication process and reprogrammable architecture of EWOD chips have led to their widespread applications in food safety analysis. Various EWOD devices have been developed for the quantitative monitoring of analytes such as food-borne pathogens, heavy metal ions, vitamins, and antioxidants, which are significant in food samples. In this paper, we reviewed the advances and developments in the design of EWOD systems for performing versatile functions starting from sample preparation to sample detection, enabling rapid and high-throughput food analysis.