RESUMEN
Soft tissues experience strain under mechanical stresses, storing energy as residual stresses and strain energy. However, the specific impact of such strain on cell migration and its molecular mechanisms remains unclear. In this study, we investigated this by using polydimethylsiloxane (PDMS) membranes with varying prestrain levels but constant stiffness to mimic tissue-like conditions. Results showed that higher prestrain levels enhanced 3T3 fibroblast adhesion and reduced filopodia formation. Elevated prestrain also increased integrin and vinculin expression, which was associated with lower cell migration rates. Notably, both 3T3 fibroblasts and primary rat airway smooth muscle cells migrated faster toward higher prestrain areas on substrates with strain gradients. Knockdown of integrin or vinculin inhibited 3T3 cell migration directionality, highlighting their critical role. This research reveals a mechanobiological pathway where strain gradients direct cell migration, providing insight into a common mechanotransduction pathway influencing cellular responses to both stiffness and strain-related mechanical cues.
RESUMEN
Monitoring airway impedance has significant clinical value in accurately assessing and diagnosing pulmonary function diseases at an early stage. To address the issue of large oscillator size and high power consumption in current pulmonary function devices, this study adopts a new strategy of expiration-driven oscillation. A lightweight and low-power airway impedance monitoring system with integrated sensing, control circuitry, and dynamic feedback system, providing visual feedback on the system's status, was developed. The respiratory impedance measurement experiments and statistical comparisons indicated that the system could achieve stable measurement of airway impedance at 5 Hz. The frequency spectrum curves of respiratory impedance ( R and X) showed consistent trends with those obtained from the clinical pulmonary function instrument, specifically the impulse oscillometry system (IOS). The differences between them were all less than 1.1 cm H 2O·s/L. Additionally, there was a significant statistical difference in the respiratory impedance R5 between the exercise and rest groups, which suggests that the system can measure the variability of airway resistance parameters during exercise. Therefore, the impedance monitoring system developed in this study supports subjects in performing handheld, continuous measurements of dynamic changes in airway impedance over an extended period of time. This research provides a foundation for further developing low-power, portable, and even wearable devices for dynamic monitoring of pulmonary function.
Asunto(s)
Resistencia de las Vías Respiratorias , Impedancia Eléctrica , Oscilometría , Pruebas de Función Respiratoria , Humanos , Oscilometría/instrumentación , Monitoreo Fisiológico/instrumentación , Monitoreo Fisiológico/métodos , Pruebas de Función Respiratoria/instrumentación , Espiración/fisiología , Diseño de Equipo , Ejercicio FísicoRESUMEN
Binary antimony selenide (Sb2Se3) is a promising inorganic light-harvesting material with high stability, nontoxicity, and wide light harvesting capability. In this photovoltaic material, it has been recognized that deep energy level defects with large carrier capture cross section, such as VSe (selenium vacancy), lead to serious open-circuit voltage (VOC) deficit and in turn limit the achievable power conversion efficiency (PCE) of Sb2Se3 solar cells. Understanding the nature of deep-level defects and establishing effective method to eliminate the defects are vital to improving VOC. In this study, a novel directed defect passivation strategy is proposed to suppress the formation of VSe and maintain the composition and morphology of Sb2Se3 film. In particular, through systematic study on the evolution of defect properties, the pathway of defect passivation reaction is revealed. Owing to the inhibition of defect-assisted recombination, the VOC increases, resulting in an improvement of PCE from 7.69% to 8.90%, which is the highest efficiency of Sb2Se3 solar cells prepared by thermal evaporation method with superstrate device configuration. This study proposes a new understanding of the nature of deep-level defects and enlightens the fabrication of high quality Sb2Se3 thin film for solar cell applications.
RESUMEN
Rationale: Bitter taste receptors (TAS2Rs) are abundantly expressed in airway smooth muscle cells (ASMCs), which have been recognized as promising targets for bitter agonists to initiate relaxation and thereby prevent excessive airway constriction as the main characteristic of asthma. However, due to the current lack of tested safe and potent agonists functioning at low effective concentrations, there has been no clinically approved TAS2R-based drug for bronchodilation in asthma therapy. This study thus aimed at exploring TAS2R agonists with bronchodilator potential by BitterDB database analysis and cell stiffness screening. Methods: Bitter compounds in the BitterDB database were retrieved and analyzed for their working subtype of TAS2R and effective concentration. Compounds activating TAS2R5, 10, and 14 at < 100 µM effective concentration were identified and subsequently screened by cell stiffness assay using optical magnetic twisting cytometry (OMTC) to identify the most potent to relax ASMCs. Then the compound identified was further characterized for efficacy on various aspects related to relaxation of ASMCs, incl. but not limited to traction force by Fourier transform traction force microscopy (FTTFM), [Ca2+]i signaling by Fluo-4/AM intensity, cell migration by scratch wound healing, mRNA expression by qPCR, and protein expressing by ELISA. The compound identified was also compared to conventional ß-agonist (isoproterenol and salbutamol) for efficacy in reducing cell stiffness of cultured ASMCs and airway resistance of ovalbumin-treated mice. Results: BitterDB analysis found 18 compounds activating TAS2R5, 10, and 14 at < 100 µM effective concentration. Cell stiffness screening of these compounds eventually identified flufenamic acid (FFA) as the most potent compound to rapidly reduce cell stiffness at 1 µM. The efficacy of FFA to relax ASMCs in vitro and abrogate airway resistance in vivo was equivalent to that of conventional ß-agonists. The FFA-induced effect on ASMCs was mediated by TAS2R14 activation, endoplasmic reticulum Ca2+ release, and large-conductance Ca2+-activated K+ (BKCa) channel opening. FFA also attenuated lipopolysaccharide-induced inflammatory response in cultured ASMCs. Conclusions: FFA as a potent TAS2R14 agonist to relax ASMCs while suppressing cytokine release might be a favorite drug agent for further development of TAS2R-based novel dual functional medication for bronchodilation and anti-inflammation in asthma therapy.
Asunto(s)
Asma , Ácido Flufenámico , Ratones , Animales , Receptores Acoplados a Proteínas G/metabolismo , Pulmón/metabolismo , Miocitos del Músculo Liso/metabolismo , Asma/tratamiento farmacológicoRESUMEN
Sb2 S3 is a promising environmentally friendly semiconductor for high performance solar cells. But, like many other polycrystalline materials, Sb2 S3 is limited by nonradiative recombination and carrier scattering by grain boundaries (GBs). This work shows how the GB density in Sb2 S3 films can be significantly reduced from 1068 ± 40 to 327 ± 23 nm µm-2 by incorporating an appropriate amount of Ce3+ into the precursor solution for Sb2 S3 deposition. Through extensive characterization of structural, morphological, and optoelectronic properties, complemented with computations, it is revealed that a critical factor is the formation of an ultrathin Ce2 S3 layer at the CdS/Sb2 S3 interface, which can reduce the interfacial energy and increase the adhesion work between Sb2 S3 and the substrate to encourage heterogeneous nucleation of Sb2 S3 , as well as promote lateral grain growth. Through reductions in nonradiative recombination at GBs and/or the CdS/Sb2 S3 heterointerface, as well as improved charge-carrier transport properties at the heterojunction, this work achieves high performance Sb2 S3 solar cells with a power conversion efficiency reaching 7.66%. An impressive open-circuit voltage (VOC ) of 796 mV is achieved, which is the highest reported thus far for Sb2 S3 solar cells. This work provides a strategy to simultaneously regulate the nucleation and growth of Sb2 S3 absorber films for enhanced device performance.
RESUMEN
Human cancers induce a chaotic, dysfunctional vasculature that promotes tumor growth and blunts most current therapies; however, the mechanisms underlying the induction of a dysfunctional vasculature have been unclear. Here, we show that split end (SPEN), a transcription repressor, coordinates rRNA synthesis in endothelial cells (ECs) and is required for physiological and tumor angiogenesis. SPEN deficiency attenuated EC proliferation and blunted retinal angiogenesis, which was attributed to p53 activation. Furthermore, SPEN knockdown activated p53 by upregulating noncoding promoter RNA (pRNA), which represses rRNA transcription and triggers p53-mediated nucleolar stress. In human cancer biopsies, a low endothelial SPEN level correlated with extended overall survival. In mice, endothelial SPEN deficiency compromised rRNA expression and repressed tumor growth and metastasis by normalizing tumor vessels, and this was abrogated by p53 haploinsufficiency. rRNA gene transcription is driven by RNA polymerase I (RNPI). We found that CX-5461, an RNPI inhibitor, recapitulated the effect of Spen ablation on tumor vessel normalization and combining CX-5461 with cisplatin substantially improved the efficacy of treating tumors in mice. Together, these results demonstrate that SPEN is required for angiogenesis by repressing pRNA to enable rRNA gene transcription and ribosomal biogenesis and that RNPI represents a target for tumor vessel normalization therapy of cancer.
Asunto(s)
Neoplasias , Proteína p53 Supresora de Tumor , Humanos , Ratones , Animales , Proteína p53 Supresora de Tumor/genética , Proteína p53 Supresora de Tumor/metabolismo , Células Endoteliales/metabolismo , Transcripción Genética , ARN Polimerasa I/genética , Neoplasias/genética , Proteínas de Unión al ADN/genética , Proteínas de Unión al ARN/genéticaRESUMEN
Doping of perovskite semiconductors1 and passivation of their grain boundaries2 remain challenging but essential for advancing high-efficiency perovskite solar cells. Particularly, it is crucial to build perovskite/indium tin oxide (ITO) Schottky contact based inverted devices without predepositing a layer of hole-transport material3-5. Here we report a dimethylacridine-based molecular doping process used to construct a well-matched p-perovskite/ITO contact, along with all-round passivation of grain boundaries, achieving a certified power conversion efficiency (PCE) of 25.39%. The molecules are shown to be extruded from the precursor solution to the grain boundaries and the bottom of the film surface in the chlorobenzene-quenched crystallization process, which we call a molecule-extrusion process. The core coordination complex between the deprotonated phosphonic acid group of the molecule and lead polyiodide of perovskite is responsible for both mechanical absorption and electronic charge transfer, and leads to p-type doping of the perovskite film. We created an efficient device with a PCE of 25.86% (reverse scan) and that maintained 96.6% of initial PCE after 1,000 h of light soaking.
RESUMEN
During vascular development, endothelial cells (ECs) undergo arterialization in response to genetic programs and shear stress-triggered mechanotransduction, forming a stable vasculature. Although the Notch receptor is known to sense shear stress and promote EC arterialization, its downstream mechanisms remain unclear. In this study, the Notch downstream miR-342-5p was found to respond to shear stress and promote EC arterialization. Shear stress upregulated miR-342-5p in a Notch-dependent manner in human umbilical vein endothelial cells (HUVECs). miR-342-5p overexpression upregulated the shear stress-associated transcriptomic signature. Moreover, miR-342-5p upregulated arterial markers and promoted EC arterialization in a Matrigel plug assay and retinal angiogenesis model. In contrast, miR-342-5p knockdown downregulated arterial markers, compromised retinal arterialization, and partially abrogated shear stress and Notch activation-induced arterial marker upregulation. Mechanistically, miR-342-5p overexpression suppressed MYC to repress EC proliferation and promote arterialization, achieved by promoting MYC protein degradation by targeting the EYA3. Consistently, EYA3 overexpression rescued miR-342-5p-mediated MYC downregulation and EC arterialization. In vivo, miR-342-5p expression was notably decreased in the ligated artery in a hindlimb ischemia model, and an intramuscular injection of miR-342-5p promoted EC arterialization and improved perfusion. In summary, miR-342-5p, a mechano-miR, mediates the effects of shear stress-activated Notch on EC arterialization and is a potential therapeutic target for ischemic diseases.
RESUMEN
Obtaining high-quality absorber layers is a major task for constructing efficient thin-film solar cells. Hydrothermal deposition is considered a promising method for preparing high-quality antimony sulfide (Sb2 S3 ) films for solar cell applications. In the hydrothermal process, the precursor reactants play an important role in controlling the film formation process and thus the film quality. In this study, Sb2 O3 is applied as a new Sb source to replace the traditional antimony potassium tartrate to modulate the growth process of the Sb2 S3 film. The reaction mechanism of the transition from Sb2 O3 to Sb2 S3 in the hydrothermal process is revealed. Through controlling the nucleation and deposition processes, high-quality Sb2 S3 films are prepared with longer carrier lifetimes and lower deep-level defect densities than those prepared from the traditional Sb source of antimony potassium tartrate. Consequently, a solar cell device based on this improved Sb2 S3 delivers a high power conversion efficiency of 6.51 %, which is in the top tier for Sb2 S3 -based solar devices using hydrothermal methods. This research provides a new and competitive Sb source for hydrothermal growth of high-quality antimony chalcogenide films for solar cell applications.
RESUMEN
Inspired by the well-known phenomenon of stretch-induced airway dilation in normal lungs and the emerging stretch-responsive Piezo1 channels that can be chemically activated by specific agonists such as Yoda1, we attempted to investigate whether chemical activation of Piezo1 by Yoda1 can modulate the biomechanical behaviors of airway smooth muscle cells (ASMCs) so that it may be exploited as a novel approach for bronchodilation. Thus, we treated in vitro cultured rat ASMCs with Yoda1, and examined the cells for calcium signaling, cell stiffness, traction force, cell migration, and the mRNA expression and distribution of molecules relevant to cell biomechanics. The data show that ASMCs expressed abundant mRNA of Piezo1. ASMCs exposed to 1 µM Yoda1 exhibited a potent but transient Ca2+ signaling, and treatment with 1 µM Yoda1 for 24 h led to decreased cell stiffness and traction force, all of which were partially reversed by Piezo1 inhibitor GsMTx4 and Piezo1 knockdown, respectively. In addition, ASMCs treated with 1 µM Yoda1 for 24 h exhibited impaired horizontal but enhanced vertical cell migration, as well as significant changes in key components of cells' contractile machinery including the structure and distribution of stress fibers and alpha-smooth muscle actin (α-SMA) fibrils, the mRNA expression of molecules associated with cell biomechanics. These results provide the first evidence that chemical activation of Piezo1 by Yoda1 resulted in marked pro-relaxation alterations of biomechanical behaviors and contractile machinery of the ASMCs. These findings suggest that Piezo1-specific agonists may indeed have great potential as alternative drug agents for relaxing ASMCs.
Asunto(s)
Señalización del Calcio , Miocitos del Músculo Liso , Ratas , Animales , Células Cultivadas , Miocitos del Músculo Liso/metabolismo , ARN Mensajero/metabolismoRESUMEN
Thermal treatment of inorganic thin films is a general and necessary step to facilitate crystallization and, in particular, to regulate the formation of point defects. Understanding the dependence of the defect formation mechanism on the annealing process is a critical challenge in terms of designing material synthesis approaches for obtaining desired optoelectronic properties. Herein, a mechanistic understanding of the evolution of defects in emerging Sb2 (S,Se)3 solar cell films is presented. A top-efficiency Sb2 (S,Se)3 solar-cell film is adopted in this study to consolidate this investigation. This study reveals that, under hydrothermal conditions, the as-deposited Sb2 (S,Se)3 film generates defects with a high formation energy, demonstrating kinetically favorable defect formation characteristics. Annealing at elevated temperatures leads to a two-step defect transformation process: 1) formation of sulfur and selenium vacancy defects, followed by 2) migration of antimony ions to fill the vacancy defects. This process finally results in the generation of cation-anion antisite defects, which exhibit low formation energy, suggesting a thermodynamically favorable defect formation feature. This study establishes a new strategy for the fundamental investigation of the evolution of deep-level defects in metal chalcogenide films and provides guidance for designing material synthesis strategies in terms of defect control.
RESUMEN
Sulfuration plays a decisive role in enhancing crystal growth and passivate defects in the fabrication of high-efficiency metal-sulfide solar cells. However, the traditional sulfuration process always suffers from high-price professional equipment, tedious processes, low activity of S, or high toxicity of H2S. Here, we develop a desired in situ sulfuration by introducing tartaric acid additive into the hydrothermal deposition process of Sb2S3. Tartaric acid, sodium thiosulfate, and potassium antimony tartaric can form Sb2Sx-contained (x > 3) as-prepared films. Encouragingly, the annealing becomes an inspiring in situ sulfuration process, which can obtain a more compact absorber layer. In addition, the crystallinity and defect property of the Sb2S3 film are also improved significantly. Finally, we achieve a high-performance Sb2S3 solar cell with a power conversion efficiency of 6.31%, which shows an encouraging enhancement of â¼15% compared with the traditional hydrothermal process. This study provides an innovative way to prepare high-efficiency Sb2S3 solar cells and provides a desirable guide to realize the in situ sulfuration process.
RESUMEN
The ongoing COVID-19 pandemic caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) poses a never before seen challenge to human health and the world economy. However, it is difficult to widely use conventional animal and cell culture models in understanding the underlying pathological mechanisms of COVID-19, which in turn hinders the development of relevant therapeutic treatments, including drugs. To overcome this challenge, various three-dimensional (3D) pulmonary cell culture models such as organoids are emerging as an innovative toolset for simulating the pathophysiology occurring in the respiratory system, including bronchial airways, alveoli, capillary network, and pulmonary interstitium, which provide a robust and powerful platform for studying the process and underlying mechanisms of SARS-CoV-2 infection among the potential primary targets in the lung. This review introduces the key features of some of these recently developed tools, including organoid, lung-on-a-chip, and 3D bioprinting, which can recapitulate different structural compartments of the lung and lung function, in particular, accurately resembling the human-relevant pathophysiology of SARS-CoV-2 infection in vivo. In addition, the recent progress in developing organoids for alveolar and airway disease modeling and their applications for discovering drugs against SARS-CoV-2 infection are highlighted. These innovative 3D cell culture models together may hold the promise to fully understand the pathogenesis and eventually eradicate the pandemic of COVID-19.
RESUMEN
Nonradiative losses caused by defects are the main obstacles to further advancing the efficiency and stability of perovskite solar cells (PSCs). There is focused research to boost the device performance by reducing the number of defects and deactivating defects; however, little attention is paid to the defect-capture capacity. Here, upon systematically examining the defect-capture capacity, highly polarized fluorinated species are designed to modulate the dielectric properties of the perovskite material to minimize its defect-capture radius. On the one hand, fluorinated polar species strengthen the defect dielectric-screening effect via enhancing the dielectric constant of the perovskite film, thus reducing the defect-capture radius. On the other, the fluorinated iodized salt replenishes the I-vacancy defects at the surface, hence lowering the defect density. Consequently, the power-conversion efficiency of an all-inorganic CsPbI3 PSC is increased to as high as 20.5% with an open-circuit voltage of 1.2 V and a fill factor of 82.87%, all of which are among the highest in their respective categories. Furthermore, the fluorinated species modification also produces a hydrophobic umbrella yielding significantly improved humidity tolerance, and hence long-term stability. The present strategy provides a general approach to effectually regulate the defect-capture radius, thus enhancing the optoelectronic performance.
RESUMEN
Sb2 S3 as a light-harvesting material has attracted great attention for applications in both single-junction and tandem solar cells. Such solar cell has been faced with current challenge of low power conversion efficiency (PCE), which has stagnated for 8 years. It has been recognized that the synthesis of high-quality absorber film plays a critical role in efficiency improvement. Here, using fresh precursor materials for antimony (antimony potassium tartrate) and combined sulfur (sodium thiosulfate and thioacetamide), a unique chemical bath deposition procedure is created. Due to the complexation of sodium thiosulfate and the advantageous hydrolysis cooperation between these two sulfur sources, the heterogeneous nucleation and the S2- releasing processes are boosted. As a result, there are noticeable improvements in the deposition rate, film morphology, crystallinity, and preferred orientations. Additionally, the improved film quality efficiently lowers charge trapping capacity, suppresses carrier recombination, and prolongs carrier lifetimes, leading to significantly improved photoelectric properties. Ultimately, the PCE exceeds 8% for the first time since 2014, representing the highest efficiency in all kinds of Sb2 S3 solar cells to date. This study is expected to shed new light on the fabrication of high-quality Sb2 S3 film and further efficiency improvement in Sb2 S3 solar cells.
RESUMEN
B-cell precursor acute lymphoblastic leukemia (BCP-ALL) is a malignancy characterized by the aberrant accumulation of immature B-cell precursors in bone marrow and other lymphoid organs. Although several intrinsic regulatory signals participating in BCP-ALL have been clarified, detailed intrinsic and extrinsic mechanisms that regulate BCP-ALL progression have not been fully understood. In the current study, we report that miR-582 is downregulated in BCP-ALL cells compared with normal B cells. Forced overexpression of miR-582 attenuated BCP-ALL cell proliferation and survival. We found that miR-582 overexpression disturbed the mitochondrial metabolism of BCP-ALL cells, leading to less ATP but more ROS production. Mechanistically, we identified PPTC7 as a direct target of miR-582. MiR-582 overexpression inhibited the activity of CoQ10, which is downstream of PPTC7 and played an important positive regulatory role in mitochondrial electron transportation. Finally, we found that overexpression of miR-582 upregulated the expression of immune checkpoint molecule CD276 and reduced NK cell-mediated cytotoxicity against BCP-ALL cells. CD276 blockade significantly increased NK cell-mediated cytotoxicity against miR-582-overexpressing BCP-ALL cells. Together, our research demonstrates that miR-582 acts as a negative regulator of BCP-ALL cells by reducing proliferation and survival, but protects BCP-ALL cells from NK cell-mediated cytotoxicity, suggesting that miR-582 may be a new therapeutic biomarker for BCP-ALL with CD276 blocker.
Asunto(s)
Linfoma de Burkitt , MicroARNs , Leucemia-Linfoma Linfoblástico de Células Precursoras , Apoptosis , Antígenos B7 , Proliferación Celular/fisiología , Humanos , Células Asesinas Naturales , MicroARNs/genética , MicroARNs/metabolismo , Factores de TranscripciónRESUMEN
Angiogenesis involves temporo-spatially coordinated endothelial cell (EC) proliferation, differentiation, migration, and sprouting. Notch signaling is essential in regulating EC behaviors during angiogenesis, but its downstream mechanisms remain incompletely defined. In the current study, we show that miR-223-3p is a downstream molecule of Notch signaling and mediates the role of Notch signaling in regulating EC migration and sprouting. In human umbilical vein endothelial cells (HUVECs), Notch activation by immobilized Dll4, a Notch ligand, upregulated miR-223-3p, and Notch activation-mediated miR-223-3p upregulation could be blocked by a γ-secretase inhibitor (DAPT). miR-223-3p overexpression apparently repressed HUVEC migration, leading to attenuated lumen formation and sprouting capacities. Transcriptome comparison and subsequent qRT-PCR validation further indicated that miR-223-3p downregulated the expression of multiple genes involved in EC migration, axon guidance, extracellular matrix remodeling, and angiogenesis. In addition, miR-223-3p antagonist transfection abolished Notch-mediated repression of EC migration and sprouting. By quantitative reverse transcription-polymerase chain reaction (qRT-PCR), western blotting, and reporter assay analysis, we confirmed that miR-223-3p directly targeted F-box and WD repeat domain-containing 7 (Fbxw7). Meanwhile, Fbxw7 overexpression could efficiently rescue the impaired migration capacity of ECs under miR-223-3p overexpression. In summary, these results identify that Notch activation-induced miR-223-3p suppresses EC migration and sprouting via Fbxw7.
Asunto(s)
Proteína 7 que Contiene Repeticiones F-Box-WD , MicroARNs , Receptores Notch , Diferenciación Celular/fisiología , Movimiento Celular/fisiología , Proliferación Celular/fisiología , Proteína 7 que Contiene Repeticiones F-Box-WD/genética , Proteína 7 que Contiene Repeticiones F-Box-WD/metabolismo , Células Endoteliales de la Vena Umbilical Humana , Humanos , MicroARNs/genética , MicroARNs/metabolismo , Receptores Notch/metabolismoRESUMEN
In recent years, respiratory diseases have increasingly become a global concern, largely due to the outbreak of Coronavirus Disease 2019 (COVID-19). This inevitably causes great attention to be given to the development of highly efficient and minimal or non-invasive methods for the diagnosis of respiratory diseases. And electrochemical biosensors based on carbon nanomaterials show great potential in fulfilling the requirement, not only because of the superior performance of electrochemical analysis, but also given the excellent properties of the carbon nanomaterials. In this paper, we review the most recent advances in research, development and applications of electrochemical biosensors based on the use of carbon nanomaterials for diagnosis of human respiratory diseases in the last 10 years. We first briefly introduce the characteristics of several common human respiratory diseases, including influenza, COVID-19, pulmonary fibrosis, tuberculosis and lung cancer. Then, we describe the working principles and fabrication of various electrochemical biosensors based on carbon nanomaterials used for diagnosis of these respiratory diseases. Finally, we summarize the advantages, challenges, and future perspectives for the currently available electrochemical biosensors based on carbon nanomaterials for detecting human respiratory diseases.
Asunto(s)
Técnicas Biosensibles , COVID-19 , Nanoestructuras , Humanos , Carbono , COVID-19/diagnóstico , Nanoestructuras/química , Técnicas Biosensibles/métodos , Técnicas Electroquímicas , Prueba de COVID-19RESUMEN
Airway smooth muscle cells (ASMCs) exist in a form of helical winding bundles within the bronchial airway wall. Such tubular tissue provides cells with considerable curvature as a physical constraint, which is widely thought as an important determinant of cell behaviors. However, this process is difficult to mimic in the conventional planar cell culture system. Here, we report a method to develop chips with cell-scale tubular (concave and convex) surfaces from fused deposition modeling 3D printing to explore how ASMCs adapt to the cylindrical curvature for morphogenesis and function. Results showed that ASMCs self-organized into two distinctively different patterns of orientation on the concave and convex surfaces, eventually aligning either invariably perpendicular to the cylinder axis on the concave surface or curvature-dependently angled on the convex surface. Such oriented alignments of the ASMCs were maintained even when the cells were in dynamic movement during migration and spreading along the tubular surfaces. Furthermore, the ASMCs underwent a phenotype transition on the tubular (both concave and convex) surfaces, significantly reducing contractility as compared to ASMCs cultured on a flat surface, which was reflected in the changes of proliferation, migration and gene expression of contractile biomarkers. Taken together, our study revealed a curvature-induced pattern formation and functional modulation of ASMCs in vitro, which is not only important to better understanding airway smooth muscle pathophysiology, but may also be useful in the development of new techniques for airway disease diagnosis and therapy such as engineering airway tissues or organoids.
RESUMEN
Most studies choose passivators essentially in a trial-and-error fashion in an attempt to attain high efficiency in perovskite solar cells (PSCs). Using deep-level transient spectroscopy (DLTS) measurements, the type of defects in perovskite films was determined to guide the passivator selection for PSCs. Three kinds of positively charged defects were found in the target PSC system. Fluorinated phenylethylamine hydroiodide (FPEAI) was chosen to passivate the surface defects due to the electronegativity and hydrophobicity of fluorine. Due to the decreased surface roughness, increased hydrophobicity, lowered defect density, and improved carrier dynamics as observed by ultrafast transient absorption spectroscopy (TAS), a PSC with meta-F-PEAI had the best efficiency over 23 % with open-circuit voltage of 1.155â V and fill factor of 80.15 %. In addition, the long-term stability of the PSC was significantly improved. The present work provides a new means to select the best passivator for different types of defects.