Flexible free-standing Fe-CoP-NAs/CC nanoarrays for high-performance full lithium-ion batteries.

In this study, a flexible, free-standing Fe-doped CoP nanoarrays electrode for superior lithium-ion storage has been successfully fabricated. The electrode combines the advantages of a Fe-doping and a flexible carbon cloth (CC) support, resulting in a high specific capacity (1356 mAh/g at 0.2 A/g) and excellent cycling stability (1138 mAh/g after 100 cycles). The cyclic voltammetry (CV) curves at different scan rates investigate the outstanding lithium storage behavior of Fe-CoP-NAs/CC which indicates a combined influence of diffusion behavior and capacitance behavior on the electrochemical process. The galvanostatic intermittent titration technique (GITT) analyzes the diffusion kinetics of Li+ which indicates the fast diffusion kinetics in the Fe-CoP/NAs/CC anode. The assembled Fe-CoP-NAs/CC//LiFePO4 battery exhibits a remarkable capacity of 325.2 mAh/g even at 5 A/g. And the battery also has good cycle stability, and still provides 498.1 mAh/g specific capacity after 200 cycles. Moreover, the Fe-CoP-NAs/CC//LiFePO4 soft-pack battery can continuously power the LEDs when it is bent at various angles which demonstrates its potential for use in wearable devices.

Effects of acupuncture at myofascial trigger points combined with sling exercise therapy on clinical recovery and cervical spine biomechanics in patients with cervical spondylotic radiculopathy.

OBJECTIVE: This research aimed to ascertain the effects of acupuncture at myofascial trigger points (MTrPs) in combination with sling exercise therapy (SET) on the clinical recovery and cervical spine biomechanics in patients with cervical spondylotic radiculopathy (CRS). METHODS: Eighty patients with CSR were divided into Group A and Group B. Group A was treated with acupuncture at MTrPs, and Group B was treated with acupuncture at MTrPs combined with SET. The cervical spine function, pain level, cervical spine biomechanics and the occurrence of complications were compared between the two groups before and after treatment. RESULTS: After treatment, the Japanese Orthopaedic Association scores, Clinical Assessment Scale for Cervical Spondylosis scores, cervical forward flexion angle, posterior extension angle, left lateral flexion angle, right lateral flexion angle, left lateral rotation angle, and right lateral rotation angle of the Group B were raised, and the Neck Disability index, Visual Analogue Scale scores, and Neck Pain Questionnaire scores were reduced versus those of the Group A. The difference in complication rates between the two groups was not of statistical significance. CONCLUSION: Acupuncture at MTrPs combined with SET promotes functional recovery of the cervical spine, reduces pain, and improves cervical spine biomechanics in patients with CRS.

Recyclable fabrication of hollow N-doped amorphous carbon nanospindles with abundant short-range curved carbon fragments as bifunctional anode for lithium/sodium ion storage.

A recyclable hard-template method is proposed to exploit spindle-shaped hollow nitrogen-doped amorphous carbon (h-NAC) with a large number of short-range curved carbon fragments as anodes for lithium/sodium ion batteries (LIBs/SIBs). Besides providing adsorption sites due to the high existence of oxygen-containing functional groups (CO and COOH), the heavily exposed edge regions also provide a favorable storage environment with high adsorption energy for Li+/Na+ due to their short-range curved structure. Importantly, the etching solution of hard templates can be recycled to generate the FeOOH nanospindles as a precursor through a simple chemical titration, which supplies a new idea for the green preparation of hollow materials. The h-NAC electrode is proven to be bifunctional for storing lithium and sodium ions, displaying favorable rate capability (255 mAh g-1 and 106 mAh g-1 at 5 A g-1 for LIBs and SIBs, respectively). After 1000 cycles at 1 A g-1, the reproducible capacities of the LIBs and SIBs kept 496 mAh g-1 and 181 mAh g-1, respectively.

FUT3 facilitates glucose metabolism of lung adenocarcinoma via activation of NF-κB pathway.

OBJECTIVE: Fucosyltransferases (FUTs) molecules have been identified to be involved in carcinogenesis of malignant tumors. Nevertheless, the biological function of fucosyltransferases-3 (FUT3) in lung adenocarcinoma (LUAD) malignant phenotype remains unclear. Herein, we investigated the association between FUT3 and LUAD pathological process. METHODS: Immunochemistry, RT-qPCR and western blot assays were conducted to evaluate the expression of FUT3 in LUAD and corresponding adjacent tissues. The prognostic value of FUT3 was assessed via Kaplan­Meier plotter database. The biological process and potential mechanism of FUT3 in LUAD were conducted via GSEA. Additionally, immunofluorescence and metabolite activity detection were performed to determine the potential role of FUT3 in LUAD glucose metabolism. The active biomarkers associated with NF-κB signaling pathway were detected via western blot. Subcutaneous tumor model was conducted to analyze the effect of FUT3 on tumorigenesis of LUAD. RESULTS: FUT3 was remarkably upregulated in LUAD tissues compared with adjacent tissues from individuals. FUT3 overexpression may predict poor prognosis of LUAD patients. Knockdown of FUT3 significantly inhibited tumor proliferation, migration and glucometabolic alteration in LUAD cells. Moreover, GSEA demonstrated that elevated FUT3 was positively related to NF-κB signaling pathway. Additionally, in vitro and in vivo assays also indicated that downregulation of FUT3 resulted in the suppression of oncogenesis and glucose metabolism via inactivation of NF-κB pathway. CONCLUSION: Our findings demonstrated that FUT3 was involved in glucometabolic process and tumorigenesis of LUAD via NF-κB signaling pathway. FUT3 may be an optimal target for diagnosis and treatment of LUAD patients.

The Landscape of Lipid Metabolism in Lung Cancer: The Role of Structural Profiling.

The aim of this study was to explore the relationship between lipids with different structural features and lung cancer (LC) risk and identify prospective biomarkers of LC. Univariate and multivariate analysis methods were used to screen for differential lipids, and two machine learning methods were used to define combined lipid biomarkers. A lipid score (LS) based on lipid biomarkers was calculated, and a mediation analysis was performed. A total of 605 lipid species spanning 20 individual lipid classes were identified in the plasma lipidome. Higher carbon atoms with dihydroceramide (DCER), phosphatidylethanolamine (PE), and phosphoinositols (PI) presented a significant negative correlation with LC. Point estimates revealed the inverse associated with LC for the n-3 PUFA score. Ten lipids were identified as markers with an area under the curve (AUC) value of 0.947 (95%, CI: 0.879-0.989). In this study, we summarized the potential relationship between lipid molecules with different structural features and LC risk, identified a panel of LC biomarkers, and demonstrated that the n-3 PUFA of the acyl chain of lipids was a protective factor for LC.

Integrated profiling of endoplasmic reticulum stress-related DERL3 in the prognostic and immune features of lung adenocarcinoma.

Background: DERL3 has been implicated as an essential element in the degradation of misfolded lumenal glycoproteins induced by endoplasmic reticulum (ER) stress. However, the correlation of DERL3 expression with the malignant phenotype of lung adenocarcinoma (LUAD) cells is unclear and remains to be elucidated. Herein, we investigated the interaction between the DERL3 and LUAD pathological process. Methods: The Cancer Genome Atlas (TCGA) database was utilized to determine the genetic alteration of DERL3 in stage I LUAD. Clinical LUAD samples including carcinoma and adjacent tissues were obtained and were further extracted to detect DERL3 mRNA expression via RT-qPCR. Immunohistochemistry was performed to evaluate the protein expression of DERL3 in LUAD tissues. The GEPIA and TIMER website were used to evaluate the correlation between DERL3 and immune cell infiltration. We further used the t-SNE map to visualize the distribution of DERL3 in various clusters at the single-cell level via TISCH database. The potential mechanisms of the biological process mediated by DERL3 in LUAD were conducted via KEGG and GSEA. Results: It was indicated that DERL3 was predominantly elevated in carcinoma compared with adjacent tissues in multiple kinds of tumors from the TCGA database, especially in LUAD. Immunohistochemistry validated that DERL3 was also upregulated in LUAD tissues compared with adjacent tissues from individuals. DERL3 was preliminarily found to be associated with immune infiltration via the TIMER database. Further, the t-SNE map revealed that DERL3 was predominantly enriched in plasma cells of the B cell population. It was demonstrated that DERL3 high-expressed patients presented significantly worse response to chemotherapy and immunotherapy. GSEA and KEGG results indicated that DERL3 was positively correlated with B cell activation and unfolded protein response (UPR). Conclusion: Our findings indicated that DERL3 might play an essential role in the endoplasmic reticulum-associated degradation (ERAD) process in LUAD. Moreover, DERL3 may act as a promising immune biomarker, which could predict the efficacy of immunotherapy in LUAD.

KCNK3 inhibits proliferation and glucose metabolism of lung adenocarcinoma via activation of AMPK-TXNIP pathway.

Non-small cell lung cancer (NSCLC) is a primary histological subtype of lung cancer with increased morbidity and mortality. K+ channels have been revealed to be involved in carcinogenesis in various malignant tumors. However, TWIK-related acid-sensitive potassium channel 1 (TASK-1, also called KCNK3), a genetic member of K2P channels, remains an enigma in lung adenocarcinoma (LUAD). Herein, we investigated the pathological process of KCNK3 in proliferation and glucose metabolism of LUAD. The expressions of KCNK3 in LUAD tissues and corresponding adjacent tissues were identified by RNA sequencing, quantitative real-time polymerase chain reaction, western blot, and immunohistochemistry. Gain and loss-of-function assays were performed to estimate the role of KCNK3 in proliferation and glucose metabolism of LUAD. Additionally, energy metabolites of LUAD cells were identified by targeted metabolomics analysis. The expressions of metabolic molecules and active biomarkers associated with AMPK-TXNIP signaling pathway were detected via western blot and immunofluorescence. KCNK3 was significantly downregulated in LUAD tissues and correlated with patients' poor prognosis. Overexpression of KCNK3 largely regulated the process of oncogenesis and glycometabolism in LUAD in vitro and in vivo. Mechanistic studies found that KCNK3-mediated differential metabolites were mainly enriched in AMPK signaling pathway. Furthermore, rescue experiments demonstrated that KCNK3 suppressed proliferation and glucose metabolism via activation of the AMPK-TXNIP pathway in LUAD cells. In summary, our research highlighted an emerging role of KCNK3 in the proliferative activity and glycometabolism of LUAD, suggesting that KCNK3 may be an optimal predictor for prognosis and a potential therapeutic target of LUAD.

Super-Coordinated Nickel N4 Ni1 O2 Site Single-Atom Catalyst for Selective H2 O2 Electrosynthesis at High Current Densities.

Electrochemical production of hydrogen peroxide (H2 O2 ) from O2 on single-atom catalysts has attracted great attention, yet the quest for robust catalysts is driven by achieving >90 % Faradaic efficiency (FE) under industrial-relevant current densities (>100 mA cm-2 ). Herein we synthesize a catalyst that contains single nickel site coordinated by four nitrogen and two oxygen atoms (i.e., N4 Ni1 O2 ) via involving carboxyl functionalized multiwall carbon nanotubes as a substrate to provide extra O coordination to the regular NiN4 site. It has a cathodic energy efficiency of approximately 82 % and a H2 O2 FE of around 96 % at 200 mA cm-2 current density, outperforming the reported single-atom catalysts for H2 O2 electrosynthesis.

Hollow nanospheres constructed by ultrafine few-layered MoS2 partially with amorphous fragments homogeneously incorporated in N-doped amorphous carbon for enhanced lithium storage performance.

The rational design of ultrathin and few-layered structures for three-dimensional MoS2 nanospheres is crucial for achieving attractive lithium-ion batteries (LIBs). Herein, hollow nanospheres constructed by ultrafine and few-layered MoS2 homogeneously incorporated in N-doped amorphous carbon (HUF-MoS2/NC) have been successfully synthesized as high-performance anode for LIBs. Using Mo-glycerol spheres as templates and dopamine hydrochloride as coordination ligands, hollow Mo-glycerol-polydopamine precursors are formed with Mo-containing groups which are surrounded by organic carbon species. Consequently, the MoS2 is confined to the nanoscale and grows partially amorphous fragments while being uniformly embedded in NC. This unique architecture can not only hinder the substantial restacking between MoS2 interlayers, offering more active sites, but also vastly enhance the electrical conductivity and relieve the mechanical stress ascribed to volume changes. As a result, the HUF-MoS2/NC composite anode exhibits excellent cyclic stability (980mAhg-1 after 300 cycles at 0.2Ag-1) and superior rate performance (498mAhg-1 at 5.0Ag-1) for LIBs.

Dynamic Characteristics and Experimental Research of Linear-Arch Bi-Stable Piezoelectric Energy Harvester.

Collecting vibration energy in the environment is expected to solve the problem of the self-power supply of wireless monitoring nodes in underground coal mines. By introducing nonlinear factors, a linear-arch bi-stable piezoelectric energy harvester (LBPEH) is designed. In order to reveal the influence of system parameters on the dynamic characteristics of LBPEH, the magnetic force model is established by the magnetizing current method, and the restoring force model is acquired through experimental measurement. The electromechanical coupling dynamics model of the system is established based on the Lagrange equation and Kirchhoff's law. The influence of excitation amplitude and excitation frequency on the dynamic characteristics of the piezoelectric energy harvester is simulated and analyzed. Moreover, experiments are designed to verify the results of the simulation. The results reveal that the restoring force of the linear-arch beam is nonlinear, and the LBPEH constructed by the linear-arch beam has an asymmetric potential well. Changing the excitation frequency or excitation amplitude can make the system in the well chaotic and achieve a large periodic motion state. With the increase of excitation amplitude, it is beneficial for the system to realize large periodic motion. The research provides theoretical guidance for the design of piezoelectric energy harvesters for different excitation conditions.

Suppression of MIR31HG affects the functional properties of thyroid cancer cells depending on the miR-761/MAPK1 axis.

BACKGROUND: Thyroid cancer is the most prevalent endocrine malignancy. Long non-coding RNA (lncRNA) MIR31HG is abnormally expressed in thyroid cancer tissues. However, the precise, critical role of MIR31HG in thyroid cancer development remains unclear. METHODS: MIR31HG, microRNA (miR)-761 and mitogen-activated protein kinase 1 (MAPK1) were quantified by quantitative real-time PCR (qRT-PCR) and immunoblotting. Cell viability, proliferation, apoptosis, invasion and migration abilities were evaluated by MTS, 5-Ethynyl-2'-Deoxyuridine (EdU), flow cytometry, transwell and wound-healing assays, respectively. Dual-luciferase reporter assays were used to validate the direct relationship between miR-761 and MIR31HG or MAPK1. RESULTS: MIR31HG was overexpressed in human thyroid cancer, and its overexpression predicted poor prognosis. Suppression of MIR31HG impeded cell proliferation, invasion and migration, as well as promoted cell apoptosis in vitro, and diminished the growth of xenograft tumors in vivo. Mechanistically, MIR31HG targeted and regulated miR-761. Moreover, miR-761 was identified as a molecular mediator of MIR30HG function in regulating thyroid cancer cell behaviors. MAPK1 was established as a direct and functional target of miR-761 and MAPK1 knockdown phenocopied miR-761 overexpression in impacting thyroid cancer cell behaviors. Furthermore, MIR31HG modulated MAPK1 expression by competitively binding to miR-761 via the shared binding sequence. CONCLUSION: Our findings demonstrate that MIR31HG targets miR-761 to regulate the functional behaviors of thyroid cancer cells by upregulating MAPK1, highlighting a strong rationale for developing MIR31HG as a novel therapeutic target against thyroid cancer.

A Method for Parameter Identification of Composite Beam Piezoelectric Energy Harvester.

This paper proposes a parameter identification method for the multiparameter identification study of the linear-arch composite beam piezoelectric energy harvester. According to the voltage response characteristics of the system under short-circuit conditions, the mechanical equation is solved by transient excitation, combined with the backbone curve theory and logarithmic attenuation method, to obtain the system's linear damping, linear stiffness, and nonlinear stiffness. According to the voltage response characteristics of the system under open-circuit conditions, combined with the electrical equations, the system electromechanical coupling coefficient and equivalent capacitance coefficient are obtained; numerical simulation results show that the identification parameters have good accuracy. Finally, an experimental platform was built for verification, and the results show that the method has high accuracy and practicability.

Comprehensive Analysis of Aquaporin Superfamily in Lung Adenocarcinoma.

Background: Lung adenocarcinoma (LUAD) is the most predomintnt lung cancer subtype with increasing morbidity and mortality. Previous studies have shown that aquaporin (AQP) family genes were correlated with tumor progression and metastasis in several kinds of malignancies. However, their biological behaviors and prognostic values in LUAD have not been comprehensively elucidated. Methods: RNA sequencing and real-time reverse transcription PCR (RT-PCR) were used to assess AQP1/3/4/5 gene expressions in LUAD patients using GEPIA and UALCAN databases. And then Kaplan-Meier analysis, cBioPortal, Metascape, GeneMANIA, TISIDB, and TIMER were utilized to determine the prognostic value, mutation frequency, and immune cell infiltration of AQP family members in LUAD. Results: We found that AQP3 expression was significantly elevated and AQP1 expression was markedly reduced in LUAD patients, whereas the expression levels of AQP4 and AQP5 exhibited no significant changes. The Kaplan-Meier survival analysis indicated that the higher expressions of AQP1/4/5 were related to longer overall survival (OS). Of interest, AQP3 was significantly correlated with the clinical tumor stage and lower AQP3 expression showed favorable prognosis in stage I LUAD patients, which indicated that AQP3 may be a potential prognostic biomarker for patients. Through functional enrichment analysis, the functions of these four AQPs genes were mainly involved in the passive transport by aquaporins, water homeostasis, and protein tetramerization. Moreover, AQP1/3/4/5 expression was strongly associated with tumor-infiltrating lymphocytes (TILs) in LUAD. Conclusion: AQP3 can be used as a prognosis and survival biomarker for stage I LUAD. These findings may provide novel insights into developing molecular targeted therapies in LUAD.

Time-Domain Dynamic Characteristics Analysis and Experimental Research of Tri-Stable Piezoelectric Energy Harvester.

In order to explore the dynamic characteristics of the linear-arch beam tri-stable piezoelectric energy harvester (TPEH), a magnetic force model was established by the magnetic dipole method, and the linear-arch composite beam nonlinear restoring force model was obtained through experiments. Based on the Euler-Bernoulli beam theory, a system dynamic model is established, and the influence of the horizontal distance, vertical distance and excitation acceleration of magnets on the dynamic characteristics of the system is simulated and analyzed. Moreover, the correctness of the theoretical results is verified by experiments. The results show that the system can be mono-stable, bi-stable and tri-stable by adjusting the horizontal or vertical spacing of the magnets under proper excitation. The potential well of the system in the tri-stable state is shallow, and it is easier to achieve a large-amplitude response. Increasing the excitation level is beneficial for the large-amplitude response of the system. This study provides theoretical guidance for the design of linear-arch beam TPEH.

Multi-Task Classification and Segmentation for Explicable Capsule Endoscopy Diagnostics.

Capsule endoscopy is a leading diagnostic tool for small bowel lesions which faces certain challenges such as time-consuming interpretation and harsh optical environment inside the small intestine. Specialists unavoidably waste lots of time on searching for a high clearness degree image for accurate diagnostics. However, current clearness degree classification methods are based on either traditional attributes or an unexplainable deep neural network. In this paper, we propose a multi-task framework, called the multi-task classification and segmentation network (MTCSN), to achieve joint learning of clearness degree (CD) and tissue semantic segmentation (TSS) for the first time. In the MTCSN, the CD helps to generate better refined TSS, while TSS provides an explicable semantic map to better classify the CD. In addition, we present a new benchmark, named the Capsule-Endoscopy Crohn's Disease dataset, which introduces the challenges faced in the real world including motion blur, excreta occlusion, reflection, and various complex alimentary scenes that are widely acknowledged in endoscopy examination. Extensive experiments and ablation studies report the significant performance gains of the MTCSN over state-of-the-art methods.

A Curve-Shaped Beam Bistable Piezoelectric Energy Harvester with Variable Potential Well: Modeling and Numerical Simulation.

To improve the energy harvesting performance of an energy harvester, a novel bistable piezoelectric energy harvester with variable potential well (BPEH-V) is proposed by introducing a spring to the external magnet from a curve-shaped beam bistable harvester (CBH-C). First, finite element simulation was performed in COMSOL software to validate that the curved beam configuration was superior to the straight beam in power generation performance, which benefits energy harvesting. Moreover, the nonlinear magnetic model was obtained by using the magnetic dipoles method, and the nonlinear restoring force model of the curve-shaped beam was acquired based on fitting the experimental data. The corresponding coupled governing equations were derived by using generalized Hamilton's principle, the dynamic responses were obtained by solving the coupling equations with the ode45 method. Finally, the numerical simulations showed that the proposed harvester can make interwell oscillations easier due to the spring being efficiently introduced to pull down the potential barrier compared with the conventional bistable harvester. Spring stiffness has a great impact on characteristics of the system, and a suitable stiffness contributes to realize large-amplitude interwell oscillations over a wide range of excitation, especially in the low excitation condition.

Controllable One-Step Synthesis of Mixed-Phase TiO2 Nanocrystals with Equivalent Anatase/Rutile Ratio for Enhanced Photocatalytic Performance.

In this study, the novel mixed-phase TiO2 nanocrystals (s-TiO2) with nearly equivalent anatase/rutile ratio were fabricated in the reagent of sec-butanol at the relatively low temperature of 80 °C by using a facile one-step condensing reflux method. The photocatalytic water splitting hydrogen production performance of s-TiO2 nanocrystals is close to that of commercial TiO2 (P25), and its photocatalytic degradation performance is about four times that of P25. The energy-level staggered interfaces and surface bridged hydroxyl groups significantly increased due to the anatase/rutile mixed-phase crystal structure and high specific surface area, which might generate the synergistic effect for the improvement of photocatalytic degradation.

Graphene-coated nanoporous nickel towards a metal-catalyzed oxygen evolution reaction.

Developing highly active electrocatalysts with low costs and long durability for oxygen evolution reactions (OERs) is crucial towards the practical implementations of electrocatalytic water-splitting and rechargeable metal-air batteries. Anodized nanostructured 3d transition metals and alloys with the formation of OER-active oxides/hydroxides are known to have high catalytic activity towards OERs but suffer from poor electrical conductivity and electrochemical stability in harsh oxidation environments. Here we report that high OER activity can be achieved from the metallic state of Ni which is passivated by atomically thick graphene in a three-dimensional nanoporous architecture. As a free-standing catalytic anode, the non-oxide transition metal catalyst shows a low OER overpotential, high OER current density and long cycling lifetime in alkaline solutions, benefiting from the high electrical conductivity and low impedance resistance for charge transfer and transport. This study may pave a new way to develop high efficiency transition metal OER catalysts for a wide range of applications in renewable energy.

Zn3V3O8/NC hybrid microspheres self-assembled by layered porous nanosheets as a superior anode material for lithium/sodium-ion batteries.

Zinc-vanadium oxides have been attracting increasing consideration as anode materials for lithium/sodium-ion batteries (LIBs and SIBs) recently. Present applications are hampered by issues, including their inferior electric conductivity and enormous volume variation. Herein, nitrogen-doped carbon wrapped Zn3V3O8 (Zn3V3O8/NC) microspheres composed of abundant nanosheets were developed as an anode material by a self-assembly strategy and subsequent surface decoration. The resulting Zn3V3O8/NC porous hybrid exhibited a high specific capacity, impressive rate capability, and long-term cycling stability for both LIBs and SIBs. Notably, the superior electrochemical properties could be assigned to novel meso/microporous features, hybrid nitrogen-doped carbon, and mixed storage mechanisms.

A Hybrid-Attention Nested UNet for Nuclear Segmentation in Histopathological Images.

Nuclear segmentation of histopathological images is a crucial step in computer-aided image analysis. There are complex, diverse, dense, and even overlapping nuclei in these histopathological images, leading to a challenging task of nuclear segmentation. To overcome this challenge, this paper proposes a hybrid-attention nested UNet (Han-Net), which consists of two modules: a hybrid nested U-shaped network (H-part) and a hybrid attention block (A-part). H-part combines a nested multi-depth U-shaped network and a dense network with full resolution to capture more effective features. A-part is used to explore attention information and build correlations between different pixels. With these two modules, Han-Net extracts discriminative features, which effectively segment the boundaries of not only complex and diverse nuclei but also small and dense nuclei. The comparison in a publicly available multi-organ dataset shows that the proposed model achieves the state-of-the-art performance compared to other models.