Recalcitrant intussusception: exploring potential associations with Helicobacter pylori infection - a case report and literature review.

BACKGROUND: Intussusception, a common cause of abdominal pain in children, often lacks clear underlying causes and is mostly idiopathic. Recurrence, though rare, raises clinical concerns, with rates escalating after each episode. Factors like pathological lead points and Henoch-Schönlein purpura (HSP) are associated with recurrent cases. On the other hand, the prevalence of Helicobacter pylori (H. pylori), often asymptomatic, in children has been declining. Although its infection is reported to be linked with HSP, its role in recurrent intussusception remains unexplored. Further research is needed to understand the interplay among H. pylori (culprit pathogen), HSP (trigger), and intractable intussusception so as to develop effective management strategies. CASE PRESENTATION: A two-year-old girl experienced four atypical episodes of intussusception at distinct locations, which later coincided with HSP. Despite treatment with steroids, recurrent intussusception persisted, suggesting that HSP itself was not a major cause for intractable presentations. Subsequent identification of H. pylori infection and treatment with triple therapy resulted in complete resolution of her recalcitrant intussusception. CONCLUSION: This instructive case underscored a sequence wherein H. pylori infection triggered HSP, subsequently resulting in recurrent intussusception. While H. pylori infection is not common in young children, the coexistence of intractable intussusception and steroid-resistant recurrent HSP necessitates consideration of H. pylori infection as a potential underlying pathogen.

The prevalence and impact of small intestine bacterial overgrowth in biliary atresia patients.

BACKGROUND: Acute cholangitis is an ominous complication in biliary atresia (BA) patients. We investigated the prevalence of small intestine bacterial overgrowth (SIBO) in BA patients and its role in predicting acute cholangitis. METHODS: There are 69 BA patients with native liver recruited into this study prospectively. They received hydrogen and methane-based breath testing (HMBT) to detect SIBO after recruitment and were followed prospectively in our institute. RESULTS: There are 16 (23.19%) subjects detected to have SIBO by HMBT. BA subjects with SIBO were noted to have higher serum alanine aminotransferase levels than others without SIBO (P = 0.03). The risk of acute cholangitis is significantly higher in BA patients with SIBO than in others without SIBO (62.50% vs. 15.09%, P < 0.001). The logistic regression analysis demonstrated that BA subjects with SIBO have a higher risk of acute cholangitis than others without SIBO (odds ratio = 9.38, P = 0.001). Cox's proportional hazard analysis further confirmed the phenomena in survival analysis (hazard ratio = 6.43, P < 0.001). CONCLUSIONS: The prevalence of SIBO in BA patients is 23.19% in this study. The presence of SIBO is associated with the occurrence of acute cholangitis in BA patients. IMPACT: What is the key message of your article? Acute cholangitis is common in BA, and is associated with SIBO after hepatoportoenterostomy in this study. What does it add to the existing literature? This study demonstrated that SIBO is common in BA after hepatoportoenterostomy, and is predictive of acute cholangitis and elevated serum ALT levels in BA. What is the impact? This prospective cohort study provides data regarding the significance of SIBO on the risk of acute cholangitis in BA patients.

Different clinical and genetic features of Alagille patients with progressive disease versus a jaundice-free course.

Background and Aim: Alagille syndrome (ALGS) is a multisystem disorder with variable clinical courses. This study investigated the clinical and genetic features of ALGS patients with different outcomes and analyzed the liver pathology at liver transplantation (LT) compared with that in biliary atresia (BA). Methods: We report the clinical characteristics, outcomes, and genetic mutations of 25 children with ALGS followed for a median of 7.3 years. Patients were classified into (i) jaundice-free (JF) group (resolving jaundice after 2 years of age); (ii) progressive disease (PD) group (persistent jaundice or progressive cholestasis). In addition, we analyzed the explant liver in 10 ALGS patients compared with 20 age-matched BA patients at the time of LT. Results: Nine patients (36%) in the JF group had a favorable outcome, with longer native liver survival than patients with PD (n = 16, P < 0.001). Fourteen of the PD group patients received LT or died. We identified 18 different JAG1 mutations in 22 patients. Three unrelated probands in the JF group had the same de novo mutation in JAG1, c.2122-2125delCAGT. Compared with BA children, ALGS patients had lower METAVIR scores in liver pathology, higher serum albumin levels, and lower weight-for-age z-scores when receiving LT. Conclusion: One-third of ALGS patients had JF and a favorable course. Children with ALGS presenting with persistent jaundice beyond 2 years of age should be cautioned for poor prognosis. ALGS patients tend to have a lesser extent of cirrhosis, and more growth problems than BA patients at the time of LT.

Risk factors and management for anastomotic stricture after surgical reconstruction of esophageal atresia.

BACKGROUND/PURPOSE: Anastomotic stricture (AS) is a major morbidity of patients with esophageal atresia (EA) after surgical reconstruction. Our study determined the risk factors of AS after EA reconstruction. The therapeutic efficacy and complications of esophageal dilatation for children with AS were also evaluated. METHODS: Forty children treated for EA between January 2008 and December 2018 were included in this retrospective analysis. Esophageal dilatation was performed when AS was diagnosed. The therapeutic effect of esophageal dilatation was determined based on nutritional status, as assessed by the weight-for-age z-score. RESULTS: Sixteen EA patients developed AS. A gap >1.5 cm between the esophageal pouches (P = 0.02) in patients with EA and type A EA was a risk factor for developing AS. A mean of 7.7 sessions of esophageal dilatation were performed per patient, and no complications occurred. The nutritional status of EA children with AS after dilatation was not inferior to that of the children without AS at the 6-month follow-up. CONCLUSION: A gap >1.5 cm between the esophageal pouches and type A EA are risk factors for AS after esophageal reconstruction. Esophageal dilatation is both safe and effective for managing strictures and improves nutritional status in EA children with AS.

Phenotypic features of a microdeletion in chromosome band 20p13: A case report and review of the literature.

BACKGROUND: 20p13 microdeletion syndrome has been reported to be associated with developmental delays, intellectual disability, epilepsy, and unspecific dysmorphic characteristics. However, only a few cases of 20p13 microdeletion have been described, and therefore its typical features and precise pathogenesis remain elusive. METHODS AND RESULTS: In this article, we report the case of a 9-month-old infant who presented with a large fontanelle, facial dysmorphism, and failure to thrive. Array-comparative genomic hybridization (aCGH) analysis confirmed a 2.01-Mb microdeletion in chromosome band 20p13 that involved SOX12 and NRSN2, both of which are considered paramount causative genes in patients with 20p13 microdeletion. To elucidate the typical features of 20p13 microdeletion, we further reviewed these previously reported cases and found that motor delay (90%) was the most common manifestation, followed by language delay (60%), abnormal digits (60%), mental retardation (50%), large fontanelle (50%), electroencephalography abnormalities (50%), and seizure (40%). CONCLUSION: This report highlights the potential of aCGH as a practical and powerful tool with which to detect submicroscopic chromosomal abnormalities in individuals presenting with a wide spectrum of phenotypes, ranging from facial dysmorphism to failure to thrive. Additionally, the literature review casts new light on the clinical features of 20p13 microdeletion.

Assessment of volatile organic compounds and particulate matter in a dental clinic and health risks to clinic personnel.

This study was conducted to assess (1) levels of volatile organic compounds (VOCs) and particulate matter (PM) in a dental clinic in southern Taiwan and (2) dental care personnel's health risks associated with due to chronic exposure to VOCs. An automatic, continuous sampling system and a multi-gas monitor were employed to quantify the air pollutants, along with environmental comfort factors, including temperature, CO2, and relative humidity at six sampling sites in the clinic over eight days. Specific VOC compounds were identified and their concentrations were quantified. Both non-carcinogenic and carcinogenic VOC compounds were assessed based on the US Environmental Protection Agency's Principles of Health Risk Assessment in terms of whether those indoor air pollutants increased health risks for the full-time dental care professionals at the clinic. Increased levels of VOCs were recorded during business hours and exceeded limits recommended by the Taiwan Environmental Protection Agency. A total of 68 VOC compounds were identified in the study area. Methylene methacrylate (2.8 ppm) and acetone (0.176 ppm) were the only two non-carcinogenic compounds that posed increased risks for human health, yielding hazard indexes of 16.4 and 4.1, respectively. None of the carcinogenic compounds increased cancer risk. All detected PM10 levels ranged from 20 to 150 µg/m(3), which met the Taiwan EPA and international limits. The average PM10 level during business hours was significantly higher than that during non-business hours (P = 0.04). Improved ventilation capacity in the air conditioning system was recommended to reduce VOCs and PM levels.

Sun tracking systems: a review.

The output power produced by high-concentration solar thermal and photovoltaic systems is directly related to the amount of solar energy acquired by the system, and it is therefore necessary to track the sun's position with a high degree of accuracy. Many systems have been proposed to facilitate this task over the past 20 years. Accordingly, this paper commences by providing a high level overview of the sun tracking system field and then describes some of the more significant proposals for closed-loop and open-loop types of sun tracking systems.

Filter quality of pleated filter cartridges.

The performance of dust cartridge filters commonly used in dust masks and in room ventilation depends both on the collection efficiency of the filter material and the pressure drop across the filter. Currently, the optimization of filter design is based only on minimizing the pressure drop at a set velocity chosen by the manufacturer. The collection efficiency, an equally important factor, is rarely considered in the optimization process. In this work, a filter quality factor, which combines the collection efficiency and the pressure drop, is used as the optimization criterion for filter evaluation. Most respirator manufacturers pleat the filter to various extents to increase the filtration area in the limit space within the dust cartridge. Six sizes of filter holders were fabricated to hold just one pleat of filter, simulating six different pleat counts, ranging from 0.5 to 3.33 pleats cm(-1). The possible electrostatic charges on the filter were removed by dipping in isopropyl alcohol, and the air velocity is fixed at 100 cm s(-1). Liquid dicotylphthalate particles generated by a constant output atomizer were used as challenge aerosols to minimize particle loading effects. A scanning mobility particle sizer was used to measure the challenge aerosol number concentrations and size distributions upstream and downstream of the pleated filter. The pressure drop across the filter was monitored by using a calibrated pressure transducer. The results showed that the performance of pleated filters depend not only on the size of the particle but also on the pleat count of the pleated filter. Based on filter quality factor, the optimal pleat count (OPC) is always higher than that based on pressure drop by about 0.3-0.5 pleats cm(-1). For example, the OPC is 2.15 pleats cm(-1) from the standpoint of pressure drop, but for the highest filter quality factor, the pleated filter needed to have a pleat count of 2.65 pleats cm(-1) at particle diameter of 122 nm. From the aspect of filter quality factor, this study suggests that the respirator manufacturers should add approximately 0.5 pleats cm(-1) to the OPC derived from the generalized correlation curve for pleated filter design based on minimum pressure drop.

Development and application of an integrated indoor air quality audit to an international hotel building in Taiwan.

Indoor air quality (IAQ) has begun to surface as an important issue that affects the comfort and health of people; however, there is little research concerned about the IAQ monitoring of hotels up to now. Hotels are designed to provide comfortable spaces for guests. However, most complaints related to uncomfortable thermal environment and inadequate indoor air quality appear. In addition, microbial pollution can affect the health of tourists such as the Legionnaire's disease and SARS problems. This study is aimed to establish the comprehensive IAQ audit approach for hotel buildings with portable equipment, and one five-star international hotel in Taiwan was selected to exam this integrated approach. Finally, four major problems are identified after the comprehensive IAQ audit. They are: (1) low room temperature (21.8 degrees C), (2) insufficient air exchange rate (<1.5 h(-1)), (3) formaldehyde contamination (>0.02 ppm), and (4) the microbial pollution (total bacteria: 2,624-3,799 CFU/m(3)). The high level of formaldehyde may be due to the emission from the detergent and cleaning agents used for housekeeping.

A MEMS-based Air Flow Sensor with a Free-standing Micro-cantilever Structure.

This paper presents a micro-scale air flow sensor based on a free-standingcantilever structure. In the fabrication process, MEMS techniques are used to deposit asilicon nitride layer on a silicon wafer. A platinum layer is deposited on the silicon nitridelayer to form a piezoresistor, and the resulting structure is then etched to create afreestanding micro-cantilever. When an air flow passes over the surface of the cantileverbeam, the beam deflects in the downward direction, resulting in a small variation in theresistance of the piezoelectric layer. The air flow velocity is determined by measuring thechange in resistance using an external LCR meter. The experimental results indicate that theflow sensor has a high sensitivity (0.0284 ω/ms-1), a high velocity measurement limit (45ms-1) and a rapid response time (0.53 s).