RESUMEN
Interfacial magnetic interactions between different elements are the origin of various spin-transport phenomena in multi-elemental magnetic systems. We investigate the coupling between the magnetic moments of the rare-earth, transition-metal, and heavy-metal elements across the interface in a GdFeCo/Pt thin film, an archetype system to investigate ferrimagnetic spintronics. The Pt magnetic moments induced by the antiferromagnetically aligned FeCo and Gd moments are measured using element-resolved x-ray measurements. It is revealed that the proximity-induced Pt magnetic moments are always aligned parallel to the FeCo magnetic moments, even below the ferrimagnetic compensation temperature where FeCo has a smaller moment than Gd. This is understood by a theoretical model showing distinct effects of the rare-earth Gd 4f and transition-metal FeCo 3d magnetic moments on the Pt electronic states. In particular, the Gd and FeCo work in-phase to align the Pt moment in the same direction, despite their antiferromagnetic configuration. The unexpected additive roles of the two antiferromagnetically coupled elements exemplify the importance of detailed interactions among the constituent elements in understanding magnetic and spintronic properties of thin film systems.
RESUMEN
Spin-transfer torque (STT) and spin-orbit torque (SOT) form the core of spintronics, allowing for the control of magnetization through electric currents. While the sign of SOT can be manipulated through material and structural engineering, it is conventionally understood that STT lacks a degree of freedom in its sign. However, this study presents the first demonstration of manipulating the STT sign by engineering heavy metals adjacent to magnetic materials in magnetic heterostructures. Spin torques are quantified through magnetic domain-wall speed measurements, and subsequently, both STT and SOT are systematically extracted from these measurements. The results unequivocally show that the sign of STT can be either positive or negative, depending on the materials adjacent to the magnetic layers. Specifically, Pd/Co/Pd films exhibit positive STT, while Pt/Co/Pt films manifest negative STT. First-principle calculations further confirm that the sign reversal of STT originates from the sign reversal of spin polarization of conduction electrons.
RESUMEN
Magnetic domain-wall devices such as racetrack memory and domain-wall shift registers facilitate massive data storage as hard disk drives with low power portability as flash memory devices. The key issue to be addressed is how perfectly the domain-wall motion can be controlled without deformation, as it can replace the mechanical motion of hard disk drives. However, such domain-wall motion in real media is subject to the stochasticity of thermal agitation with quenched disorders, resulting in severe deformations with pinning and tilting. To sort out the problem, we propose and demonstrate a new concept of domain-wall control with a position error-free scheme. The primary idea involves spatial modulation of the spin-orbit torque along nanotrack devices, where the boundary of modulation possesses broken inversion symmetry. In this work, by showing the unidirectional motion of domain wall with position-error free manner, we provide an important missing piece in magnetic domain-wall device development.
RESUMEN
Herein, we report an exotic domain-wall dynamics showing double Walker breakdowns in magnetic multilayer films composed of two magnetic layers. Such multiple Walker breakdowns are attributed to the internal magnetic dipole field, which is antisymmetric on the domain walls of the lower and upper magnetic layers. A micromagnetic simulation shows four phases of the domain-wall dynamics, which result in a phase diagram with the phase boundaries of the double Walker breakdown fields. Such double Walker breakdowns lead to two minima in the variation of the domain-wall velocity, as often observed experimentally.
RESUMEN
The electric-current-induced spin torque on local magnetization allows the electric control of magnetization, leading to numerous key concepts of spintronic devices. Utilizing the steady-state spin precession under spin-polarized current, a nanoscale spin-torque oscillator tunable over GHz range is one of those promising concepts. Albeit successful proof of principles to date, the spin-torque oscillators still suffer from issues regarding output power, linewidth and magnetic-field-free operation. Here we propose an entirely new concept of spin-torque oscillator, based on magnetic skyrmion dynamics subject to lateral modulation of the spin-Hall effect (SHE). In the oscillator, a skyrmion circulates around the modulation boundary between opposite SHE-torque regions, since the SHE pushes the skyrmion toward the modulation boundary in both regions. A micromagnetic simulation confirmed such oscillations with frequencies of up to 15 GHz in media composed of synthetic ferrimagnets. This fast and robust SHE-modulation-based skyrmion oscillator is expected to overcome the issues associated with conventional spin-torque oscillators.
RESUMEN
Symmetry breaking is a fundamental concept that prevails in many branches of physics1-5. In magnetic materials, broken inversion symmetry induces the Dzyaloshinskii-Moriya interaction (DMI), which results in fascinating physical behaviours6-14 with the potential for application in future spintronic devices15-17. Here, we report the observation of a bulk DMI in GdFeCo amorphous ferrimagnets. The DMI is found to increase linearly with an increasing thickness of the ferrimagnetic layer, which is a clear signature of the bulk nature of DMI. We also found that the DMI is independent of the interface between the heavy metal and ferrimagnetic layer. This bulk DMI is attributed to an asymmetric distribution of the elemental content in the GdFeCo layer, with spatial inversion symmetry broken throughout the layer. We expect that our experimental identification of a bulk DMI will open up additional possibilities to exploit this interaction in a wide range of materials.
RESUMEN
In the presence of a magnetic field, the flow of charged particles in a conductor is deflected from the direction of the applied force, which gives rise to the ordinary Hall effect. Analogously, moving skyrmions with non-zero topological charges and finite fictitious magnetic fields exhibit the skyrmion Hall effect, which is detrimental for applications such as skyrmion racetrack memory. It was predicted that the skyrmion Hall effect vanishes for antiferromagnetic skyrmions because their fictitious magnetic field, proportional to net spin density, is zero. Here we investigate the current-driven transverse elongation of pinned ferrimagnetic bubbles. We estimate the skyrmion Hall effect from the angle between the current and the bubble elongation directions. The angle and, hence, the skyrmion Hall effect vanishes at the angular momentum compensation temperature where the net spin density vanishes. Furthermore, our study establishes a direct connection between the fictitious magnetic field and the spin density.
RESUMEN
Unidirectional motion of magnetic structures such as the magnetic domain and domain walls is a key concept underlying next-generation memory and logic devices. As a potential candidate of such unidirectional motion, it has been recently demonstrated that the magnetic bubblecade-the coherent unidirectional motion of magnetic bubbles-can be generated by applying an alternating magnetic field. Here we report the optimal configuration of applied magnetic field for the magnetic bubblecade. The tilted alternating magnetic field induces asymmetric expansion and shrinkage of the magnetic bubbles under the influence of the Dzyaloshinskii-Moriya interaction, resulting in continuous shift of the bubbles in time. By examining the magnetic bubblecade in Pt/Co/Pt films, we find that the bubblecade speed is sensitive to the tilt angle with a maximum at an angle, which can be explained well by a simple analytical form within the context of the domain-wall creep theory. A simplified analytic formula for the angle for maximum speed is then given as a function of the amplitude of the alternating magnetic field. The present results provide a useful guideline of optimal design for magnetic bubblecade memory and logic devices.
RESUMEN
Current-induced domain wall motion has drawn great attention in recent decades as the key operational principle of emerging magnetic memory devices. As the major driving force of the motion, the spin-orbit torque on chiral domain walls has been proposed and is currently extensively studied. However, we demonstrate here that there exists another driving force, which is larger than the spin-orbit torque in atomically thin Co films. Moreover, the direction of the present force is found to be the opposite of the prediction of the standard spin-transfer torque, resulting in the domain wall motion along the current direction. The symmetry of the force and its peculiar dependence on the domain wall structure suggest that the present force is, most likely, attributed to considerable enhancement of a negative nonadiabatic spin-transfer torque in ultranarrow domain walls. Careful measurements of the giant magnetoresistance manifest a negative spin polarization in the atomically thin Co films which might be responsible for the negative spin-transfer torque.
RESUMEN
The Dzyaloshinskii-Moriya interaction (DMI) in magnetic objects is of enormous interest, because it generates built-in chirality of magnetic domain walls (DWs) and topologically protected skyrmions, leading to efficient motion driven by spin-orbit torques. Because of its importance for both potential applications and fundamental research, many experimental efforts have been devoted to DMI investigation. However, current experimental probing techniques cover only limited ranges of the DMI strength and have specific sample requirements. Thus, there are no versatile methods to quantify DMI over a wide range of values. Here, we present such an experimental scheme, which is based on the angular dependence of asymmetric DW motion. This method can be used to determine values of DMI much larger than the maximum strength of the external magnetic field strength, which demonstrates that various DMI strengths can be quantified with a single measurement setup. This scheme may thus prove essential to DMI-related emerging fields in nanotechnology.
RESUMEN
The one-dimensional magnetic skyrmion motion induced by an electric current has attracted much interest because of its application potential in next-generation magnetic memory devices. Recently, the unidirectional motion of large (20 µm in diameter) magnetic bubbles with two-dimensional skyrmion topology, driven by an oscillating magnetic field, has also been demonstrated. For application in high-density memory devices, it is preferable to reduce the size of skyrmion. Here we show by numerical simulation that a skyrmion of a few tens of nanometres can also be driven by high-frequency field oscillations, but with a different direction of motion from the in-plane component of the tilted oscillating field. We found that a high-frequency field for small skyrmions can excite skyrmion resonant modes and that a combination of different modes results in a final skyrmion motion with a helical trajectory. Because this helical motion depends on the frequency of the field, we can control both the speed and the direction of the skyrmion motion, which is a distinguishable characteristic compared with other methods.
RESUMEN
Unidirectional motion of magnetic domain walls is the key concept underlying next-generation domain-wall-mediated memory and logic devices. Such motion has been achieved either by injecting large electric currents into nanowires or by employing domain-wall tension induced by sophisticated structural modulation. Herein, we demonstrate a new scheme without any current injection or structural modulation. This scheme utilizes the recently discovered chiral domain walls, which exhibit asymmetry in their speed with respect to magnetic fields. Because of this asymmetry, an alternating magnetic field results in the coherent motion of the domain walls in one direction. Such coherent unidirectional motion is achieved even for an array of magnetic bubble domains, enabling the design of a new device prototype-magnetic bubblecade memory-with two-dimensional data-storage capability.
RESUMEN
We demonstrate here that the current-driven domain wall (DW) in two dimensions forms a "facet" roughness, distinctive to the conventional self-affine roughness induced by a magnetic field. Despite the different universality classes of these roughnesses, both the current- and field-driven DW speed follow the same creep law only with opposite angular dependences. Such angular dependences result in a stable facet angle, from which a single DW image can unambiguously quantify the spin-transfer torque efficiency, an essential parameter in DW-mediated nanodevices.
RESUMEN
The energy barrier of a magnetic domain wall trapped at a defect is measured experimentally. When the domain wall is pushed by an electric current and/or a magnetic field, the depinning time from the barrier exhibits perfect exponential distribution, indicating that a single energy barrier governs the depinning. The electric current is found to generate linear and quadratic contributions to the energy barrier, which are attributed to the nonadiabatic and adiabatic spin-transfer torques, respectively. The adiabatic spin-transfer torque reduces the energy barrier and, consequently, causes depinning at lower current densities, promising a way toward low-power current-controlled magnetic applications.
RESUMEN
Reported herein is a possible way of controlling the depinning field of magnetic domain walls (DWs) by using a magnetic field H(T) transverse to the nanowire. A typical notch structure-in the form of triangles on both edges of ferromagnetic Permalloy nanowires-is employed to pin the DWs. The depinning field of the DW initially pinned at the notch is then measured with respect to H(T). Interestingly, it is experimentally found that the depinning field is drastically decreased to almost 0 with increasing H(T), due to the internal shift of the DW position at the notch. Moreover, it is experimentally observed that an oscillatory behavior of the depinning field occurs with respect to H(T), Micromagnetic calculation is performed to model the depinning behavior of the DW pinned at the notch structure with respect to H(T). It is ascribed to the natural edge roughness of the nanowire, which means the edge roughness plays an important role in determination of the depinning field.
RESUMEN
It is experimentally reported herein that the injection field of domain walls (DWs) from the nucleation pad to the nanowire is controlled by the angle of the initializing magnetic field with the use of asymmetric sample structures. The injection field is abruptly varied twice between two distinct values at a certain angle. Micromagnetic simulation is used to model the injection of a DW into the nanowire with respect to the angle of the initializing magnetic field. This is ascribed to the different structure of the DW at the junction between the pad and the nanowire, resulting in the different pinning strength of the DW. These observations provide a way to control the injection field of DWs into nanostructures and give a possibility of the fast, reliable motion of the DW with field strengths less than the so-called Walker field on the nanowire by injecting the DW with a known magnetic structure.
RESUMEN
We examine magnetic domain wall motion in metallic nanowires Pt-Co-Pt. Regardless of whether the motion is driven by either magnetic fields or current, all experimental data fall onto a single universal curve in the creep regime, implying that both the motions belong to the same universality class. This result is in contrast to the report on magnetic semiconductor (Ga,Mn)As exhibiting two different universality classes. Our finding signals the possible existence of yet other universality classes which go beyond the present understanding of the statistical mechanics of driven interfaces.
RESUMEN
We have found that the depinning field of domain walls (DWs) in permalloy (Ni(81)Fe(19)) nanowires can be experimentally controlled by interactions between magnetic stray fields and artificial constrictions. A pinning geometry that consists of a notch and a nanobar is considered, where a DW traveling in the nanowire is pinned by the notch with a nanobar vertical to it. We have found that the direction of magnetization of the nanobar affects the shape and local energy minimum of the potential landscape experienced by the DW; therefore, the pinning strength strongly depends on the interaction of the magnetic stray field from the nanobar with the external pinning force of the notch. The mechanism of this pinning behavior is applied for the instant and flexible control of the pinning strength with respect to various DW motions in DW-mediated magnetic memory devices.
RESUMEN
We propose a method to control the polarization of the magnetic domain walls (DWs) in ferromagnetic nanowires. Two neighboring DWs with antiparallel polarization alignment rather than parallel alignment are found to exhibit better stability with a helical magnetic structure that can be hardly be detangled. To achieve such an antiparallel alignment, two co-planar current lines with an angle to the nanowire are designed, from which the Oersted field creates a domain in between the current lines while keeping the polarization of the DWs beneath the current lines, as confirmed by a micromagnetic calculation for ferromagnetic nanowires with perpendicular magnetic anisotropy.
RESUMEN
A magnetometric technique for detecting the magnetic anisotropy field of ferromagnetic films is described. The technique is based on the extraordinary Hall voltage measurement with rotating the film under an external magnetic field. By analyzing the angle-dependent Hall voltage based on the Stoner-Wohlfarth theory, the magnetic anisotropy field is uniquely determined. The present technique is pertinent especially for ultrathin films with strong intrinsic signal, in contrast to the conventional magnetometric techniques of which the signal is in proportion to the sample volume and geometry.