Effect of hemicellulose hydrolysate addition on the dehydration and redispersion characteristic of cellulose nanofibrils.

Nanocellulose, owing to its environmentally friendly and unique attributes, is gaining traction in various industries. However, commercialization of nanocellulose faces challenges due to structural alterations during drying process, leading to irreversible aggregation. This study, inspired by wood's natural structure, introduces a cellulose nanofibril (CNF) drying system using hemicellulose hydrolysate (HH) as a capping agent. The addition of only 1 wt% of HH to the CNF suspension not only prevents aggregation among CNFs during dehydration and drying but also dramatically enhances the redispersion rate and dispersion stability of the dried CNFs. The redispersed CNF/HH suspension exhibits physicochemical properties comparable to the original CNF suspension before drying. This confirms that HH inhibits irreversible hydrogen bonding among CNFs, leading to the restoration of the nanostructure during redispersion. Moreover, HH in the CNF suspension after redispersion can be easily removed through a simple water rinsing process, highlighting HH as a highly suitable candidate for preventing aggregation of CNFs.

Glucaric Acid Production from Miscanthus sacchariflorus via TEMPO-Mediated Oxidation with an Efficient Separation System.

In this study, production and isolation of glucaric acid from lignocellulosic biomass were performed via potassium cation-based TEMPO-mediated oxidation for the ease of glucaric acid isolation. To optimize the oxidation conditions, response surface methodology (RSM) was adopted using standard glucose as the raw material. Among the oxidation conditions, the dosage of oxidant and pH of reaction affected the glucaric acid production, and the optimum conditions were suggested by RSM analysis: 5 °C of reaction temperature, 4.23 equiv dosage of KClO per mole of glucose, and pH of 12. Furthermore, glucaric acid was produced from lignocellulosic biomass-derived enzymatic hydrolysate from Miscanthus under optimum conditions. The impurities such as xylose and lignin in enzymatic hydrolysate inhibited the efficiency of glucose oxidation. As a result, more oxidant was required to produce sufficient glucaric acid from the enzymatic hydrolysate compared to standard glucose. The produced glucaric acid was simply isolated by controlling the pH in the form of glucaric acid monopotassium salt, which showed lower solubility in water, and the purity of isolated glucaric acid was over 99%. The overall mass balance of feedstock to glucaric acid was analyzed, suggesting that 86.38% (w/w) glucaric acid could be produced from initial glucan in feedstock.

Lignin/PVA hydrogel with enhanced structural stability for cationic dye removal.

In this study, a lignin-based hydrogel for wastewater treatment was prepared by incorporating kraft lignin (KL) into a poly (vinyl alcohol) (PVA) matrix. The underwater structural stability of the KL-PVA hydrogel was guaranteed through physicochemical crosslinking, involving freeze-thaw process and chemical crosslinking reaction. The KL-PVA hydrogel displayed superior compressive characteristics compared to the original PVA hydrogel. This improvement was attributed to the chemical crosslinking and the reinforcing effect of the incorporated KL microparticles. The incorporation of anionic KL microparticles into the PVA three-dimensional network structure enhanced the cationic methylene blue (MB) and crystal violet (CV) adsorption efficiency of the prepared KL-PVA hydrogel. The MB adsorption results were well explained by pseudo-2nd order kinetics model and Langmuir isotherm model. Electrostatic forces, hydrogen bonding and π-π stacking interactions were the main adsorption mechanisms between cationic dyes and KL surfaces, indicating the potential of KL-PVA hydrogel as an effective adsorption material. Moreover, regulating the molecular weight of PVA not only prevented lignin leakage from the KL-PVA hydrogel but also elevated the KL content within the hydrogel, consequently improving its dye removal performance. For KL-PVA hydrogel with high molecular weight PVA, the MB and CV adsorption capacities were 193.8 mg/g and 190.0 mg/g, respectively.

Efficacy of smartphone application-based multi-domain cognitive training in older adults without dementia.

Background: As the population ages and the prevalence of dementia increases, there is a growing emphasis on the importance of cognitive training to prevent dementia. A smartphone application-based cognitive training software program, BeauBrain Trainer (BBT), has been developed to provide better access to cognitive training for older adults. Numerous studies have revealed the effectiveness of cognitive training using a cognitive assessment tool. However, relatively few studies have evaluated brain activation using brain imaging as a result of improved cognitive function. Methods: All participants were required to download the BBT, an Android-based application for cognitive training, onto their own smartphone or tablet computer and to engage in cognitive training at home. Older adults without dementia were enrolled in this study, including 51 participants in the intervention group and 50 participants in the control group. The BBT comprised a set of 12 cognitive tasks, including two tasks in each of the following six cognitive domains: attention, language, calculation, visuospatial function, memory, and frontal/executive function. Each cognitive task was divided into four blocks based on its level of difficulty. A 16-week cognitive training was designed to carry out cognitive tasks using a total of 48 blocks (12 tasks × 4 levels) for at least 1.5 h per day, 5 days per week. All participants in the intervention group were given BBT tasks that gradually increased in difficulty level, which they submitted through a smartphone application daily for 16 weeks. The researchers monitored the participants' task performance records on the website and encouraged participants to engage in cognitive training through regular contact. This study was conducted to investigate the improvement in cognitive function and the activation pattern of the frontal cortex in older adults participating in smartphone application-based cognitive training. The cognitive assessment tool was the BeauBrain cognitive screening test (CST), a tablet-based computerized cognitive screening test. The activation pattern of the frontal cortex was measured using functional near-infrared spectroscopy (fNIRS). Additionally, this study aimed to determine the positive effects of cognitive training on everyday functioning and psychological states using a questionnaire. Results: Of 101 participants, 85 older adults without dementia (84.1%) who completed the study protocol were included in the statistical analysis. There were 41 participants (80.3%) in the intervention group and 44 participants (88.0%) in the control group. A two-way repeated-measures analysis of variance (ANOVA) was used to compare the cognitive scores over a 16-week period between the intervention and control groups. According to the CST results, the intervention group exhibited a statistically significant increase in the language subtest scores, specifically the phonemic word fluency test, compared to those of the control group. The fNIRS results revealed greater activation in the dorsolateral prefrontal cortex during the STROOP incongruent task in the intervention group than did the control group. However, the effectiveness of cognitive training was not observed across a variety of rating scales, including everyday functioning, depression, self-efficacy, attention, and subjective memory complaints. Conclusion: This study revealed that a smartphone-based cognitive training application led to improvements in phonemic generative naming ability and activation of the prefrontal cortex in older adults without dementia. This study is meaningful because it confirmed that cognitive training is partially effective in enhancing frontal lobe function. It also provided information on the brain mechanisms related to the effects of cognitive training using fNIRS.

Biodegradation behavior of acetylated lignin added polylactic acid under thermophilic composting conditions.

Acetylated lignin (AL) can improve compatibility with commercial plastic polymers compared to existing lignin and can be used as an effective additive for eco-friendly biocomposites. For this reason, AL can be effectively incorporated into polylactic acid (PLA)-based biocomposites, but its biodegradation properties have not been investigated. In this study, biodegradation experiments were performed under mesophilic and thermophilic conditions to determine the effect of AL addition on the biodegradation characteristics of PLA-based biocomposites. As a result, the PLA-based biocomposite showed a faster biodegradation rate in a thermophilic composting environment, which is higher than the glass transition temperature of PLA, compared to a mesophilic environment. 16S rDNA sequencing results showed that differences in microbial communities depending on mesophilic and thermophilic environments strongly affected the biodegradation rate of lignin/PLA biocomposites. Importantly, the addition of AL can effectively delay the thermophilic biodegradation of PLA biocomposites. As a result of tracking the changes in physicochemical properties according to the biodegradation period in a thermophilic composting environment, the main biodegradation mechanism of AL/PLA biocomposite hydrolysis. It proceeded with cleavage of the PLA molecular chain, preferential biodegradation of the amorphous region, and additional biodegradation of the crystalline region. Above all, adding AL can be proposed as an effective additive because it can minimize the decline in the mechanical properties of PLA and delay the biodegradation rate more effectively compared to existing kraft lignin (KL).

Enhancement of elongation at break and UV-protective properties of poly(lactic acid) film with cationic ring opening polymerized (CROP)-lignin.

In this study, the intrinsic brittleness of poly(lactic acid) (PLA) was overcome by chemical modification using ethyl acetate-extracted lignin (EL) via cationic ring-opening polymerization (CROP). The CROP was conducted to promote homopolymerization under starvation of the initiator (oxyrane). This method resulted in the formation of lignin-based polyether (LPE). LPE exhibited enhanced interfacial compatibility with nonpolar and hydrophobic PLA owing to the fewer hydrophilic hydroxyl groups and a long polyether chain. In addition, because of the UV-protecting and radical-scavenging abilities of lignin, LPE/PLA exhibited multifunctional properties, resulting in improved chemical properties compared with the neat PLA film. Notably, one of the LPE/PLA films (EL_MCF) exhibited excellent elongation at break of 297.7 % and toughness of 39.92 MJ/m3. Furthermore, the EL_MCF film showed superior UV-protective properties of 99.52 % in UVA and 88.95 % in UVB ranges, both significantly higher than those of the PLA film, without sacrificing significant transparency in 515 nm. In addition, the radical scavenging activity improved after adding LPE to the PLA film. These results suggest that LPEs can be used as plasticizing additives in LPE/PLA composite films, offering improved physicochemical properties.

Correlation between cerebral hemodynamic functional near-infrared spectroscopy and positron emission tomography for assessing mild cognitive impairment and Alzheimer's disease: An exploratory study.

This study was performed to investigate the usefulness of functional near-infrared spectroscopy (fNIRS) by conducting a comparative analysis of hemodynamic activation detected by fNIRS and positron emission tomography (PET) and magnetic resonance imaging (MRI) in patients with mild cognitive impairment (MCI) and Alzheimer's disease (AD). Participants were divided into four groups: the subjective memory impairment (SMI), amnestic MCI (aMCI), non-amnestic MCI (naMCI), and AD groups. We recorded the hemodynamic response during the semantic verbal fluency task (SVFT) using a commercial wireless continuous-wave NIRS system. The correlation between the parameters of the neuroimaging assessments among the groups was analyzed. Region of interest-based comparisons showed that the four groups had significantly different hemodynamic responses during SVFT in the bilateral dorsolateral prefrontal cortex (DLPFC). The linear mixed effect model result indicates that the mean ΔHbO2 from the bilateral DLPFC regions showed a significant positive correlation to the overall FDG-PET after controlling for age and group differences in the fNIRS signals. Amyloid PET signals tended to better differentiate the AD group from other groups, and fNIRS signals tended to better differentiate the SMI group from other groups. In addition, a comparison between the group pairs revealed a mirrored pattern between the hippocampal volume and hemodynamic response in the DLPFC. The hemodynamic response detected by fNIRS showed a significant correlation with metabolic and anatomical changes associated with disease progression. Therefore, fNIRS may be considered as a screening tool to predict the hemodynamic and metabolic statuses of the brain in patients with MCI and AD.

Fabrication of transparent cellulose nanofibril composite film with smooth surface and ultraviolet blocking ability using hydrophilic lignin.

Ecofriendly multifunctional films with only biomass-based components have gathered significant interest from researchers as next-generation materials. Following this trend, a TEMPO-oxidized cellulose nanofibril (TOCNF) film containing hydrophilic lignin (CL) was fabricated. To produce the lignin, peracetic acid oxidation was carried out, leading to the introduction of carboxyl groups into the lignin structure. By adding hydrophilic lignin, various characteristics (e.g., surface smoothness, UV protection, antimicrobial activity, and barrier properties) of the TOCNF film were enhanced. In particular, the shrinkage of CNF was successfully prevented by the addition of CL, which is attributed to the lower surface roughness (Ra) from 18.93 nm to 4.99 nm. As a result, the smooth surface of the TOCNF/CL film was shown compared to neat TOCNF film and TOCNF/Kraft lignin composite film. In addition, the TOCNF/CL film showed a superior UV blocking ability of 99.9 % with high transparency of 78.4 %, which is higher than that of CNF-lignin composite films in other research. Also, water vapor transmission rate was reduced after adding CL to TOCNF film. Consequently, the developed TOCNF/CL film can be potentially utilized in various applications, such as food packaging.

Effect of chemically modified lignin addition on the physicochemical properties of PCL nanofibers.

In this study, a chemically modified lignin additive was successfully prepared to improve the physicochemical properties of biodegradable polycaprolactone (PCL)-based nanofibers. The molecular weight and surface functional group characteristics of lignin were effectively controlled through a solvent fractionation process using ethanol. Then, PCL-g-lignin was successfully synthesized by using ethanol-fractionated lignin as a platform for the PCL grafting process. Finally, PCL/PCL-g-lignin composite nanofibers were simply prepared by adding PCL-g-lignin to the PCL doping solution and performing a solution blow spinning process. The addition of PCL-g-lignin could dramatically improve the physical and chemical properties of PCL nanofibers, and in particular, the tensile strength (0.28 MPa) increased by approximately 280 % compared to the conventional PCL. In addition, the lignin moiety present in PCL-g-lignin was able to impart UV blocking properties to PCL nanofibers, and as a result, it was possible to effectively suppress the photolysis phenomenon that occurred rapidly in existing PCL nanofibers. Therefore, PCL-g-lignin may be widely used not only as a reinforcing agent of existing biodegradable nanofibers but also as a functional additive for UV protection.

Physicochemical characteristics of lignin-g-PMMA/PLA blend via atom transfer radical polymerization depending on the structural difference of organosolv lignin.

Lignin has different structural characteristics depending on the extraction conditions. In this study, three types of ethanol organosolv lignin (EOL) were produced under different extraction conditions involving the reaction temperature (140, 160, 180 °C), sulfuric acid concentration (0.5, 1, 1.5 %), and ethanol concentration (40, 60, 80 %) to compare the difference in properties when mixed with polylactic acid (PLA) matrix after atom transfer radical polymerization (ATRP). ATRP of EOL was conducted to improve its compatibility with PLA using methyl methacrylate (MMA) as a monomer. The molecular weight of each EOL increased significantly, and the glass transition temperature (Tg) decreased from approximately 150 to 110 °C. The EOL-g-PMMA copolymer exhibited a melting point (Tm), whereas EOL did not, implying that the thermoplasticity increased. The EOL-g-PMMA/PLA blend and film were prepared with 10 % of the copolymer in the PLA matrix. The tensile strength and strain of the blend were higher than those of unmodified organosolv lignin as the compatibility increased, and the UV transmittance was lower than that of neat PLA because of the UV protecting properties of EOL moiety.

Thermoplasticity reinforcement of ethanol organosolv lignin to improve compatibility in PLA-based ligno-bioplastics: Focusing on the structural characteristics of lignin.

Commonly, lignin macromolecules have limitations in application to the thermoplastics industries due to poor dispersibility and interfacial compatibility within ligno-bioplastics. In this study, the dispersibility and interfacial compatibility of ethanol organosolv lignin (EOL) in PLA-based ligno-bioplastic were improved by enhancing the thermoplasticity via oxypropylation. Further, three types of EOLs extracted from different severity conditions were applied to investigate the effect of the structural characteristics of EOLs on the changes in the thermal properties. The thermal properties of oxypropylated EOL were dependent on the structural characteristics of the initial EOL as well as the degree of polymerization of propylene oxide. The thermoplasticity of EOLs extracted under mild condition was effectively increased as a new Tg and melting were observed. Based on increased thermoplasticity, the dispersibility and interfacial compatibility of EOL within PLA-based ligno-bioplastic were successfully improved, which compensates for the deterioration in mechanical strength of ligno-bioplastic due to the addition of unmodified EOL. Therefore, oxypropylation of EOL with suitable structural characteristics promises improved availability as a thermoplastic material.

Eco-friendly alkaline lignin/cellulose nanofiber drying system for efficient redispersion behavior.

Although nanocellulose is an eco-friendly, high-performance raw material provided by nature, the agglomeration of nanocellulose that occurs during the drying process is the biggest obstacle to its advanced materialization and commercialization. In this study, a facile and simple nanocellulose drying system was designed using lignin, which is self-assembled together with cellulose in natural wood, as an eco-friendly additive. The addition of lignin not only minimized aggregation during the drying and dehydration process of nanocellulose but also ensured excellent redispersion kinetics and stability. In addition, the added lignin could be removed through a simple washing process. Through FTIR, XRD, TGA, tensile and swelling tests, it was confirmed that the addition of lignin enabled the reversible restitution of the nanocellulose physicochemical properties to the level of pristine never-dried nanocellulose in drying, redispersion, and polymer processing processes.

Cationic surface-modified regenerated nanocellulose hydrogel for efficient Cr(VI) remediation.

Because nanocellulose has a large specific surface area and abundant hydroxyl functional groups due to its unique nanomorphology, interest increases as an eco-friendly water treatment material. However, the distinctive properties of nanocellulose, which exists in a dispersion state, strongly hamper its usage in practical water treatment processes. Additionally, nanocellulose shows low performance in removing anionic pollutants because of its anionic characteristics. In an effort to address this challenge, regenerated cellulose (RC) hydrogel was fabricated through cellulose's dissolution and regeneration process using an eco-friendly aqueous solvent system. Subsequently, a crosslinking process was carried out to introduce the cationic functional groups to the RC surface PEI coating (P/RC). As a result, the PEI surface cationization process improved the mechanical rigidity of RC and showed an excellent Cr(VI) removal capacity of 578 mg/g. In addition, the prepared P/RC maintained more than 90% removal efficiency even after seven reuses.

NIR-chemometric approaches for evaluating carbonization characteristics of hydrothermally carbonized lignin.

The aim of this study is to establish prediction models for the non-destructive evaluation of the carbonization characteristics of lignin-derived hydrochars as a carbon material in real time. Hydrochars are produced via the hydrothermal carbonization of kraft lignins for 1-5 h in the temperature range of 175-250 °C, and as the reaction severity of hydrothermal carbonization increases, the hydrochar is converted to a more carbon-intensive structure. Principal component analysis using near-infrared spectra suggests that the spectral regions at 2132 and 2267 nm assigned to lignins and 1449 nm assigned to phenolic groups of lignins are informative bands that indicate the carbonization degree. Partial least squares regression models trained with near-infrared spectra accurately predicts the carbon content, oxygen/carbon, and hydrogen/carbon ratios with high coefficients of determination and low root mean square errors. The established models demonstrate better prediction than ordinary least squares regression models.

Phenolic Hydroxyl Groups in the Lignin Polymer Affect the Formation of Lignin Nanoparticles.

Alkaline soda lignin (AL) was sequentially fractionated into six fractions of different molecular size by means of solvent extraction and their phenolic hydroxyl groups were chemoselectively methylated to determine their effect on nanoparticle formation of lignin polymers. The effect of the lignin structure on the physical properties of nanoparticles was also clarified in this study. Nanoparticles were obtained from neat alkaline soda lignin (ALNP), solvent-extracted fractions (FALNPs, i.d. 414-1214 nm), and methylated lignins (MALNPs, i.d. 516-721 nm) via the nanoprecipitation method. Specifically, the size properties of MALNPs showed a high negative correlation (R2 = 0.95) with the phenolic hydroxyl group amount. This indicates that the phenolic hydroxyl groups in lignin could be influenced on the nucleation or condensation during the nanoprecipitation process. Lignin nanoparticles exhibited high colloidal stability, and most of them also showed good in vitro cell viability. This study presents a possible way to control nanoparticle size by blocking specific functional groups and decreasing the interaction between hydroxyl groups of lignin.

Formation of pure nanoparticles with solvent-fractionated lignin polymers and evaluation of their biocompatibility.

This study aimed to determine the effects of lignin characteristics (mainly molecular weight, functional groups, and internal linkages) on nanoparticle formation. First, five different lignin fractions (Mw 1460-12,900) were obtained from commercial kraft lignin (KL) by sequential solvent extraction. Functional groups and internal linkages were determined in lignin fractions, each fraction consisting of different levels and ratios. Second, spherical lignin nanoparticles (i.d. 193-1039 nm) were synthesized by nanoprecipitation at different pre-dialysis concentrations (1, 2, 4, and 6 mg mL-1 THF) with the different fractions (F1, F2, F3, F4, and F5). The study revealed that larger particles consisted of lignin fractions of lower molecular weight and higher phenolic group content (KL-F1 and F2), while smaller but non-uniform particles were produced from fractions of higher molecular weight and lower phenolic group content (KLF4 and F5). Every zeta potential value of the particle exceeded -35 mV. The nanoparticles from raw kraft lignin exhibited no significant cytotoxicity, hemotoxicity, and hypersensitivity. This study revealed that molecular weight and hydroxyl group content in the lignin highly correlated with nanoparticle properties. The present kraft lignin nanoparticles have potential for use in various polymer-based nanotechnology.

Shape memory alloy-driven undulatory locomotion of a soft biomimetic ray robot.

The objective of this study was to imitate undulatory motion, which is a commonly observed swimming mechanism of rays, using a soft morphing actuator. To achieve the undulatory motion, an artificial muscle built with shape memory alloy-based soft actuators was exploited to control the shape-changing behavior of a soft fin membrane. Artificial undulating fins were divided into two categories according to the method of generating the wave motion: single and multiple actuator-driven fins. For empirical research on the transformation and propulsion behavior of each fin type, the design and construction of bound propulsors were undertaken to mimic the structural and behavioral aspects of animals. To visualize the effect of undulatory motion on the swimming efficiency test of the fin beat frequency, a simplified soft undulating fin with a rectangular propulsor was constructed and tested. Additionally, dynamic modeling of the fin tip in wave-traveling was conducted for comparison and optimization. To optimize the thrust and propulsion efficiency of robot speed, the effects of the wave amplitude control and actuator sequence on the fin behavior were examined. An untethered robot was constructed according to the experimental results of the propulsors. Both exhibited exceptional swimming efficiency and maneuverability. The multiple actuator-driven ray robot exhibited a maximum swimming speed of 0.25 body lengths per second which is almost a similar swimming speed with previously reported robots. The developed robot achieved directional swimming (forward and backward) and turning (including rotation). Underwater exploration in an artificial environment was performed using the robot.

Evaluation of Xylooligosaccharides Production for a Specific Degree of Polymerization by Liquid Hot Water Treatment of Tropical Hardwood.

Eucalyptus pellita is known as attractive biomass, and it has been utilized for eucalyptus oil, furniture, and pulp and paper production that causes a significant amount of byproducts. Liquid hot water treatment depending on combined severity factor (CSF) was subjected to isolate hemicellulose fraction from E. pellita and to produce xylooligosaccharides (XOS). The xylan extraction ratio based on the initial xylan content of the feedstock was maximized up to 77.6% at 170 °C for 50 min condition (CSF: 1.0), which had accounted for XOS purity of 76.5% based on the total sugar content of the liquid hydrolysate. In this condition, the sum of xylobiose, xylotriose, and xylotetraose which has a low degree of polymerization (DP) of 2 to 4 was determined as 80.6% of the total XOS. The highest XOS production score established using parameters including the xylan extraction ratio, XOS purity, and low DP XOS ratio was 5.7 at CSF 1.0 condition. XOS production score evaluated using the CSF is expected to be used as a productivity indicator of XOS in the industry (R-squared value: 0.92).

Thermal Properties of Ethanol Organosolv Lignin Depending on Its Structure.

In general, lignin exhibits unpredictable and nonuniform thermal properties due to the structural variations caused by the extraction processes. Therefore, a systematic understanding of the correlation between the extraction conditions, structural characteristics, and properties is indispensable for the commercial utilization of lignin. In this study, the effect of extraction conditions on the structural characteristics of ethanol organosolv lignin (EOL) was investigated by response surface methodology. The structural characteristics of EOL (molecular weight, hydroxyl content, and intramolecular coupling structure) were significantly affected by the extraction conditions (temperature, sulfuric acid concentration, and ethanol concentration). In addition, the correlation between the structural characteristics and thermal properties of the extracted EOLs was estimated. The relevant correlations between the structural characteristics and thermal properties were determined. In particular, EOLs that had a low molecular weight, high phenolic hydroxyl content, and low aryl-ether linkage content exhibited prominent thermal properties in terms of their initial decomposition rate and a high glass transition temperature, T g. Correspondingly, EOL-PLA blends prepared using three EOL types exhibited improved thermal properties (starting point of thermal decomposition and maximum decomposition temperature) compared to neat PLA and had thermal decomposition behaviors coincident with the thermal properties of the constituent EOLs.

Pretreatment of bio-oil with ion exchange resin to improve fuel quality and reduce char during hydrodeoxygenation upgrading with Pt/C.

To obtain high-quality biofuel, bio-oil obtained from fast pyrolysis of woody biomass was pretreated with ion exchange resin (amberlyst 36) at 50°C, 100°C, and 150°C, and then the recovered liquid product was upgraded using hydrodeoxygenation (HDO) with Pt/C at 300°C. After the two-stage upgrading, 4 types of products (gas, light oil, heavy oil, and char) were obtained. Two-immiscible liquid products were consisted of organic heavy oil, derived from bio-oil, and aqueous light oil, based on the ethanol. The mass balances of the HDO products were influenced by the pretreatment temperature. Ion exchange pretreatment of bio-oil was effective in reducing the char formation during the hydrodeoxygenation (HDO) process. The pretreatment also improved the following heavy oil properties: the water content, heating value, viscosity, acidity, and oxygen level. As a parameter used to indicate the biofuel acidity, the total acid number (TAN) value, was clearly reduced from 114.5 (bio-oil) to 34.1-78.2 (heavy oils). Furthermore, the water and oxygen contents of bio-oil (21.1 and 52.6 wt%, respectively) declined after the pretreatment followed by HDO (ranged 5.1-6.9 and 19.0-25.5 wt%, respectively), thereby improving its higher heating value (HHV) from 17.2 MJ/kg (bio-oil) to 26.2-28.1 MJ/kg (heavy oils). The degree of deoxygenation (DOD) increased as the pretreatment temperature decreased, and the highest energy efficiency (79.8%) was observed after pretreatment at 100°C. In terms of catalyst deactivation during the reaction, both carbon deposition and surface cracking intensified with increasing pretreatment temperatures.