RESUMEN
In this study, we investigated a novel approach to fabricate multifunctional ionic gel sensors by using deep eutectic solvents (DESs) as replacements for water. When two distinct DESs were combined, customizable mechanical and conductive properties were created, resulting in improved performance compared with traditional hydrogel-based strain sensors. DES ionic gels possess superior mechanical properties, transparency, biocompatibility, and antimicrobial properties, making them suitable for a wide range of applications such as flexible electronics, soft robotics, and healthcare. We conducted a comprehensive evaluation of the DES ionic gels, evaluating their performance under extreme temperature conditions (-70 to 80 °C), impressive optical transparency (94%), and biocompatibility. Furthermore, a series of tests were conducted to evaluate the antibacterial performance (Escherichia coli) of the DES ionic gels. Their wide strain (1-400%) and temperature (15-50 °C)-sensing ranges demonstrate the versatility and adaptability of DES ionic gels for diverse sensing requirements. The resulting DES ionic gels were successfully applied in human activity and vital sign monitoring, demonstrating their potential for biointegrated sensing devices and healthcare applications. This study offers valuable insights into the development and optimization of hydrogel sensors, particularly for applications that require environmental stability, biocompatibility, and antibacterial performance, thereby paving the way for future advancements in this field.
Asunto(s)
Antibacterianos , Disolventes Eutécticos Profundos , Humanos , Solventes , Antibacterianos/farmacología , Hidrogeles/farmacología , Agua , Escherichia coli , IonesRESUMEN
Biofouling due to nonspecific proteins or cells on the material surfaces is a major challenge in a range of applications such as biosensors, medical devices, and implants. Even though poly(ethylene glycol) (PEG) has become the most widely used stealth material in medical and pharmaceutical products, the number of reported cases of PEG-triggered rare allergic responses continues to increase in the past decades. Herein, a new type of antifouling material poly(amine oxide) (PAO) has been evaluated as an alternative to overcome nonspecific foulant adsorption and impart comparable biocompatibility. Alkyl-substituted PAO containing diethyl, dibutyl, and dihexyl substituents are prepared, and their solution properties are studied. Photoreactive copolymers containing benzophenone as the photo-cross-linker are prepared by reversible addition-fragmentation chain-transfer polymerization and fully characterized by gel permeation chromatography and dynamic light scattering. Then, these water-soluble polymers are anchored onto a silicon wafer with the aid of UV irradiation. By evaluating the fouling resistance properties of these modified surfaces against various types of foulants, protein adsorption and bacterial attachment assays show that the cross-linked PAO-modified surface can efficiently inhibit biofouling. Furthermore, human blood cell adhesion experiments demonstrate that our PAO polymer could be used as a novel surface modifier for biomedical devices.
Asunto(s)
Incrustaciones Biológicas , Polímeros , Humanos , Polímeros/farmacología , Polímeros/química , Incrustaciones Biológicas/prevención & control , Óxidos , Aminas , Polietilenglicoles/química , Propiedades de Superficie , AdsorciónRESUMEN
This study developed an epoxy-type biomimic zwitterionic copolymer, poly(glycidyl methacrylate) (PGMA)-poly(sulfobetaine acrylamide) (SBAA) (poly(GMA-co-SBAA)), to modify the surface of polyamide elastic fabric using a hydroxylated pretreatment zwitterionic copolymer and dip-coating method. X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy confirmed successful grafting, while scanning electron microscopy revealed changes in the surface pattern. Optimization of coating conditions included controlling reaction temperature, solid concentration, molar ratio, and base catalysis. The modified fabric exhibited good biocompatibility and anti-biofouling performance, as evidenced by contact angle measurements and evaluation of protein adsorption, blood cell, and bacterial attachment. This simple, cost-effective zwitterionic modification technology has high commercial value and is a promising approach for surface modification of biomedical materials.
RESUMEN
This study develops a multi-functional hydrogel with a dual injection system based on the adhesive and self-healing properties of the byssus excretion found in mussels. Through precisely controlling the composite cross-linking hydrophobic association (HA) structure composed of A and B solutions, a high-strength, temperature-sensitive injectable hydrogel can be obtained, and it has good self-healing properties. The main composition of A solution contains the surfactant SDS, which can form amphiphilic micelles, the strength increasing component stearyl methacrylate (C18), and NIPAAm, which provides thermo-sensitivity. Solution B contains dopamine acrylate (DAA), which has self-healing properties, and ferric chloride (FeCl3), which is a connecting agent. The rheological behavior shows that when the temperature is increased from 25 °C to 32 °C, the gel can be completed in seven minutes to form a composite hydrogel of NIPAAm-DAA-HA. When NMR identification was conducted on composite DAA, it was found that when comparing DAA and dopamine hydrochloride there were new peaks with specific characteristics, which confirm that this study successfully prepared DAA; swelling tests found that swelling could surpass a rate of 100%, and a higher ratio of crosslinking agent decreased the amount of moisture absorbed; the results of the compression test showed that the addition of hydrophobic micelles C18 effectively enhanced the mechanical properties of hydrogel, allowing it to withstand increased external stress; the adhesiveness results show that an increase in the catechol-Fe3+ concentration of the NIPAAm-DAA-HA hydrogel results in an increased adhesiveness of 0.0081 kg/cm2 on pig skin; the self-healing tests show that after taking damage, NIPAAm-DAA-HA hydrogel can be reactivated with catechol-Fe3+ and self-heal at a rate of up to 70% after 24 h; antibacterial tests show that hydrogel has good bacterial resistance to against E. coli, staphylococcus epidermidis, and bacillus cereus; through in vitro transdermal absorption, it can be seen that the release ability of drugs within the hydrogel can reach up to 8.87 µg/cm2. The NIPAAm-DAA-HA hydrogel prepared by this study performed excellently in both adhesion and self-healing tests. The thermo-sensitive and antibacterial properties can be applied to the treatment of deep wounds and address some of the flaws of traditional wound dressings.
RESUMEN
Antifouling materials are indispensable in the biomedical field, but their high hydrophilicity and surface free energy provoke contamination on surfaces under atmospheric conditions, thus limiting their applicability in medical devices. This study proposes a new zwitterionic structure, 4-vinylpyridine carboxybetaine (4VPCB), that results in lower surface free energy and increases biological inertness. In the design of 4VPCB, one to three carbon atoms are inserted between the positive charge and negative charge (carbon space length, CSL) of the pyridyl-containing side chain to adjust hydration with water molecules. The pyridine in the 4VPCB structure provides the hydrophobicity of the zwitterionic functional group, and thus it can have a lower free energy in the gas phase but maintain higher hydrophilicity in the liquid phase environment. Surface plasmon resonance and confocal microscopy were used to analyze the antiprotein adsorption and anti-blood cell adhesion properties of the P4VPCB brush surface. The results showed that the CSL in the P4VPCB structure affected the biological inertness of the surface. The protein adsorption on the surface of P4VPCB2 (CSL= 2) is lower than that on the surfaces of P4VPCB1 (CSL = 1) and P4VPCB3 (CSL = 3), and the optimal resistance to protein adsorption can be reduced to 7.5 ng cm-2. The surface of P4VPCB2 can also exhibit excellent blood-inert function in the adhesion test with various human blood cells, offering a potential possibility for the future design of a new generation of blood-inert medical materials.
Asunto(s)
Betaína/análogos & derivados , Betaína/síntesis química , Betaína/química , Materiales Biocompatibles , Biopolímeros/química , Estructura Molecular , Propiedades de SuperficieRESUMEN
Biofouling has long been a problem for biomaterials, so being able to control the fouling on the surface of a biomaterial would be ideal. In this study a copolymer system was designed comprising three moieties: an epoxy containing group, glycidyl methacrylate (GMA); a thermoresponsive segment, N-isopropylacrylamide (NIPAAm); and an antifouling zwitterionic unit, sulfobetaine methacrylate (SBMA). The copolymers (pGSN), synthesized via free radical polymerization with these 3 moieties, were then grafted onto polydimethylsiloxane (PDMS). The presence of a critical temperature for both the copolymers and the coated PDMS was evidenced by particle size and contact angle measurements. The coated PDMS exhibited controllable temperature-dependent antifouling behaviors and stimuli-responsive phase characteristics in the presence of salts. The interactions of the coated PDMS with biomolecules were tested via attachment of fibrinogen protein, platelets, human whole blood, and tumor cells (HT1080). The attachment and detachment of these biomolecules were studied at different temperatures. Exposed hydrophobic domains of thermoresponsive NIPAAm-rich pGSN containing NIPAAm at 56 mol% generally allows molecular and cellular attachment on the PDMS surface at 37 °C. On the other hand, the coated PDMS with a relatively high content of SBMA (>41 mol%) in the copolymer started to exhibit fouling resistance and lower the thermoresponsive properties. Interestingly, the incorporation of zwitterionic SBMA units into the copolymers was found to accelerate the hydration of the PDMS surfaces and resulted in biomolecular and cellular detachment at 25 °C, which is comparable to the detachment at 4 °C. This modified surface behavior is found to be consistent through all biofouling tests.
Asunto(s)
Incrustaciones Biológicas/prevención & control , Dimetilpolisiloxanos/química , Fibrinógeno/química , Ácidos Polimetacrílicos/química , Acrilamidas/química , Adsorción , Plaquetas/metabolismo , Adhesión Celular/efectos de los fármacos , Línea Celular , Compuestos Epoxi/química , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Metacrilatos/química , Concentración Osmolar , TemperaturaRESUMEN
Self-cleaning surfaces allow the reversible attachment and detachment of microorganisms which show great promise in regards to their reusability as smart biomaterials. However, a widely used biomaterial such as polydimethylsiloxane (PDMS) suffers from high biofouling activity and hydrophobic recovery that results in decreased efficiency and stability. A current challenge is to modify and fabricate self-cleaning PDMS surfaces by incorporating antifouling and pH-sensitive properties. To address this, we synthesized a zwitterionic and pH-sensitive random poly(glycidyl methacrylate- co-sulfobetaine methacrylate- co-2-(dimethylamino)ethyl methacrylate) polymer, poly(GMA- co-SBMA- co-DMAEMA). In this work, chemical modification of PDMS was done by grafting onto poly(GMA- co-SBMA- co-DMAEMA) after surface activation via UV and ozone for 90 min to ensure the formation of covalent bonds necessary for stable grafting. The PDMS grafted with G20-S40-D40 exhibit antifouling and pH-sensitive properties by mitigating fibrinogen adsorption, blood cell adhesion, and releasing 98% adhered E. coli bacteria after immersion at basic pH. The grafting of poly(GMA- co-SBMA- co-DMAEMA) presented in this work shows attractive potential for biomedical and industrial applications as a simple, smart, and effective method for the modification of PDMS interfaces.
RESUMEN
Bio-inert biomaterial design is vital for fields like biosensors, medical implants, and drug delivery systems. Bio-inert materials are generally hydrophilic and electrical neutral. One limitation faced in the design of bio-inert materials is that most of the modifiers used are specific to their substrate. In this work, we synthesized a novel zwitterionic copolymer containing a catechol group, a non-substrate dependent biomimetic anchoring segment, that can form a stable coating on various materials. No previous study was conducted using a grafting-to approach and determined the critical amount of catechol groups needed to effectively modify a material. The synthesized copolymers of sulfobetaine acrylamide (SBAA) and dopamine methacrylamide (DMA) in this work contains varying numbers of catechol groups, in which the critical number of catechol groups that had effectively modified substrates to have the bio-inert property was determined. The bio-inert property and capability to do coating on versatile substrates were evaluated in contact with human blood by coating different material groups such as ceramic, metallic, and polymeric groups. The novel structure and the simple grafting-to approach provides bio-inert property on various materials, giving them non-specific adsorption and attachment of biomolecules such as plasma proteins, erythrocytes, thrombocytes, bacteria, and tissue cells (85-95% reduction).
Asunto(s)
Acrilamidas/química , Betaína/análogos & derivados , Materiales Biocompatibles/química , Materiales Biomiméticos/química , Catecoles/química , Dopamina/análogos & derivados , Acrilamidas/síntesis química , Acrilamidas/metabolismo , Animales , Betaína/síntesis química , Betaína/química , Betaína/metabolismo , Materiales Biocompatibles/síntesis química , Materiales Biocompatibles/metabolismo , Materiales Biomiméticos/síntesis química , Materiales Biomiméticos/metabolismo , Biomimética/métodos , Catecoles/síntesis química , Catecoles/metabolismo , Línea Celular , Dopamina/síntesis química , Dopamina/metabolismo , Humanos , Ensayo de Materiales , RatonesRESUMEN
Amphiphilic zwitterionic copolymers have a severe problem of solubility, which restricts the feasibility and development of antifouling coatings. In this work, zwitterionic polymers were grafted via a novel modification method, namely, in situ self-assembling coating (ISC), which consists of synthesizing and simultaneously coating a copolymer onto a surface. This resolves the dissolution problem of amphiphilic zwitterionic copolymers. Here, the ISC method was applied to a copolymer composed of hydrophobic styrene (ST) and hydrophilic sulfobetaine methacrylate (SBMA). Under optimized conditions of concentration, molar ratio, and reaction time, the amphiphilic copolymer, poly(styrene-co-sulfobetaine methacrylate) (PS-PSBMA), can be coated onto the substrate surface. Ultralow protein adsorption from single-protein solutions and reduction of attachments from human blood platelets, erythrocytes, leukocytes, tissue cells, and bacteria were achieved. The mechanism of ISC was explained by carrying out time-dependent fibrinogen adsorption tests, along with particle size measurements in the polymerization bath. Furthermore, the ISC method was applied to versatile hydrophobic materials including polypropylene (PP), poly(dimethylsiloxane) (PDMS), and poly(tetrafluoroethylene) (PTFE). This work introduces a unique, convenient, and efficient method for synthesizing and coating amphiphilic zwitterionic polymers in a single step for antifouling applications in complex media.
RESUMEN
Titanium and stainless steel materials are widely used in numerous devices or in custom parts for their excellent mechanical properties. However, their lack of biocompatibility seriously limits their usage in the biomedical field. This study focuses on the grafting of triblock copolymers on titanium and stainless steel metal susbtrates for improving their general biofouling resistance. The series of copolymers that we designed is composed of two blocks of zwitterionic sulfobetaine (SBMA) monomers and one block of glycidyl methacrylate (GMA). The number of repeat units forming each block, n, was finely tuned and controlled to 25, 50, 75, or 100, permitting regulation of the grafting thickness, the morphology, and the dependent properties such as the surface hydrophilicity and biofouling resistance. It was shown that the copolymer possessing n = 50 repeat units in each block, corresponding to a molecular weight of about 15.2 kDa, led to the best nonfouling properties, assessed using plasma proteins, blood cells, fibroblasts cells, and various bacteria. This was explained by an optimized grafting degree and chain organization of the copolymer. Lower value (n = 25) and higher values (n = 75, 100) led to low surface coverage and the formation of aggregates, respectively. The best copolymer was grafted onto scalpels (steel) and dental roots (titanium), and antifouling properties demonstrated using Escherichia coli and HT1080 cells. Results of this work show that this unique triblock copolymer holds promise as a potential material for surface modification of biomedical metallic devices, provided a fine-tuning of the blocks organization and length.
RESUMEN
In bioenvironmental detection, surface-enhanced Raman scattering (SERS) signals are greatly affected by anti-specific biomolecule adsorption, which generates strong background noise, reducing detection sensitivity and selectivity. It is thus necessary to modify the SERS substrate surface to make it anti-fouling to maintain excellent SERS signals. Herein, we propose a zwitterionic copolymer, namely poly(glycidyl methacrylate-co-sulfobetaine methacrylate) (poly(GMA-co-SBMA)), for the surface modification of SERS substrates, which were fabricated and characterized spectroscopically. The copolymer was grafted onto Ag nanocubes (NCs) on an Ag surface with massive nanogaps via 1,2-ethanedithiol, which acted as a metal-insulator-metal (MIM) substrate. The high density of poly(GMA-co-SBMA) grafted near NCs favored the formation of connections between adjacent NCs, causing strong surface plasmon resonance at these junctions. With the zwitterionic-copolymer-modified surface, the adhesion of large biomolecules in platelet-rich plasma (PRP) solution can be effectively resisted, as determined from immunoassay and fibrinogen adsorption results. The SERS signals for malachite green (MG) in PRP solution (10-6 M) were effectively distinguished using the copolymer-grafted MIM substrate. MG was deposited on adjacent copolymer-grafted NCs, which amplified the SERS signals. Moreover, the copolymer connected adjacent NCs, inducing the electromagnetic effect at copolymer-grafted surfaces, which improved the SERS mechanism. The hydration process restructured the MG-trapped copolymer-grafted surface, decreasing the number of MG characteristic peak regions and increasing that of the copolymer regions. These results reveal that grafting a copolymer onto an MIM substrate allows MG to be easily trapped and released in complex biomatrices and increases surface reproducibility due to anti-fouling, leading to high SERS enhancement.
Asunto(s)
Cationes , Plasma Rico en Plaquetas/química , Colorantes de Rosanilina/análisis , Espectrometría Raman , Adsorción , Humanos , Metacrilatos/química , Reproducibilidad de los Resultados , Propiedades de SuperficieRESUMEN
UNLABELLED: Most biomaterials have a lack of a simple, efficient and robust antifouling modification approach that limits their potential for biomedical applications. The challenge is to develop a universal surface grafting solution to meet the antifouling requirement. In this work, a new formulation of zwitterionic sulfobetaine-based copolymer, ploy(glycidyl methacrylate-co-sulfobetaine methacrylate) (poly(GMA-co-SBMA)), is designed as a chemical for grafting onto material and is introduced for the surface zwitterionization of versatile biomaterials, including ceramic, metal, and plastics. The grafting principle used to stabilize the poly(GMA-co-SBMA) on the target surfaces is based the base-induced ring opening reaction between epoxied and hydroxyl groups. A universal surface modification procedure was developed and performed from an optimized sequence of ultra-violet ozone pretreatment and trimethylamine-catalyzed zwitterionization on a selective case of versatile surfaces including silicon wafer, ceramic glass, titanium, steel, and polystyrene. The prepared poly(GMA-co-SBMA) with an optimum PGMA/PSBMA ratio of 0.23 and a molecular weight of 25kDa exhibited the best resistance to fibrinogen adsorption with over 90% reduction as well as blood cell activation, tissue cell adhesion and bacterial attachment on the zwitterionic copolymer grafted surfaces. The developed antifouling grafting introduces a universal modification method to generate zwitterionic interfaces on versatile biomaterial substrates, providing great potential for application in medical device coating. STATEMENT OF SIGNIFICANCE: A simple, efficient and robust antifouling modification approach is critical for many scientific interests and industrial applications. In current stage, the existing available zwitterionic modifications suffer from the lack of universal surface grafting solution to achieve the antifouling requirement on versatile biomaterial substrates. In this study, we synthesized and characterized a new zwitterionic sulfobetaine-based copolymer, ploy(glycidyl methacrylate-co-sulfobetaine methacrylate) (poly(GMA-co-SBMA)), which is designed as chemical grafting onto material and introduced for the surface zwitterionization of versatile biomaterials, including ceramic, metal, and plastics. This research have a promising opportunity for the application of stealth biomaterial interfaces on the next generation of medical devices.
Asunto(s)
Betaína/análogos & derivados , Plaquetas/metabolismo , Compuestos Epoxi/química , Escherichia coli/metabolismo , Fibroblastos/metabolismo , Metilmetacrilatos/química , Streptococcus mutans/metabolismo , Betaína/química , Adhesión Celular , Línea Celular , Humanos , Adhesividad PlaquetariaRESUMEN
UNLABELLED: For surface-based diagnostic devices to achieve reliable biomarker detection in complex media such as blood, preventing nonspecific protein adsorption and incorporating high loading of biorecognition elements are paramount. In this work, a novel method to produce nonfouling zwitterionic hydrogel coatings was developed to achieve these goals. Poly(carboxybetaine acrylamide) (pCBAA) hydrogel thin films (CBHTFs) prepared with a carboxybetaine diacrylamide crosslinker (CBAAX) were coated on gold and silicon dioxide surfaces via a simple spin coating process. The thickness of CBHTFs could be precisely controlled between 15 and 150nm by varying the crosslinker concentration, and the films demonstrated excellent long-term stability. Protein adsorption from undiluted human blood serum onto the CBHTFs was measured with surface plasmon resonance (SPR). Hydrogel thin films greater than 20nm exhibited ultra-low fouling (<5ng/cm(2)). In addition, the CBHTFs were capable of high antibody functionalization for specific biomarker detection without compromising their nonfouling performance. This strategy provides a facile method to modify SPR biosensor chips with an advanced nonfouling material, and can be potentially expanded to a variety of implantable medical devices and diagnostic biosensors. STATEMENT OF SIGNIFICANCE: In this work, we developed an approach to realize ultra-low fouling and high ligand loading with a highly-crosslinked, purely zwitterionic, carboxybetaine thin film hydrogel (CBHTF) coating platform. The CBHTF on a hydrophilic surface demonstrated long-term stability. By varying the crosslinker content in the spin-coated hydrogel solution, the thickness of CBHTFs could be precisely controlled. Optimized CBHTFs exhibited ultra-low nonspecific protein adsorption below 5ng/cm(2) measured by a surface plasmon resonance (SPR) sensor, and their 3D architecture allowed antibody loading to reach 693ng/cm(2). This strategy provides a facile method to modify SPR biosensor chips with an advanced nonfouling material, and can be potentially expanded to a variety of implantable medical devices and diagnostic biosensors.
Asunto(s)
Aminoácidos Cíclicos/química , Anticuerpos/química , Técnicas Biosensibles/métodos , Materiales Biocompatibles Revestidos/química , Ciclobutanos/química , Hidrogeles/química , Membranas Artificiales , HumanosRESUMEN
We introduced a thermosettable zwitterionic copolymer to design a high temperature tolerance biomaterial as a general antifouling polymer interface. The original synthetic fouling-resistant copolymer, poly(vinylpyrrolidone)-co-poly(sulfobetaine methacrylate) (poly(VP-co-SBMA)), is both thermal-tolerant and fouling-resistant, and the antifouling stability of copolymer coated interfaces can be effectively controlled by regulating the VP/SBMA composition ratio. We studied poly(VP-co-SBMA) copolymer gels and networks with a focus on their general resistance to protein, cell, and bacterial bioadhesion, as influenced by the thermosetting process. Interestingly, we found that the shape of the poly(VP-co-SBMA) copolymer material can be set at a high annealing temperature of 200 °C while maintaining good antifouling properties. However, while the zwitterionic PSBMA polymer gels were bioinert as expected, control of the fouling resistance of the PSBMA polymer networks was lost in the high temperature annealing process. A poly(VP-co-SBMA) copolymer network composed of PSBMA segments at 32 mol % showed reduced fibrinogen adsorption, tissue cell adhesion, and bacterial attachment, but a relatively higher PSBMA content of 61 mol % was required to optimize resistance to platelet adhesion and erythrocyte attachment to confer hemocompatibility to human blood. We suggest that poly(VP-co-SBMA) copolymers capable of retaining stable fouling resistance after high temperature shaping have a potential application as thermosettable materials in a bioinert interface for medical devices, such as the thermosettable coating on a stainless steel blood-compatible metal stent investigated in this study.
Asunto(s)
Adhesión Bacteriana/fisiología , Proteínas Sanguíneas/química , Proliferación Celular/fisiología , Materiales Biocompatibles Revestidos/química , Metacrilatos/química , Povidona/análogos & derivados , Células Cultivadas , Escherichia coli/citología , Escherichia coli/fisiología , Dureza , Humanos , Iones , Ensayo de Materiales , Adhesividad Plaquetaria/fisiología , Povidona/química , Unión Proteica , Electricidad Estática , TemperaturaRESUMEN
Reliable surface-enhanced Raman scattering (SERS) based biosensing in complex media is impeded by nonspecific protein adsorptions. Because of the near-field effect of SERS, it is challenging to modify SERS-active substrates using conventional nonfouling materials without introducing interference from their SERS signals. Herein, we report a stealth surface modification strategy for sensitive, specific and accurate detection of fructose in protein solutions using SERS by forming a mixed self-assembled monolayer (SAM). The SAM consists of a short zwitterionic thiol, N,N-dimethyl-cysteamine-carboxybetaine (CBT), and a fructose probe 4-mercaptophenylboronic acid (4-MPBA). The specifically designed and synthesized CBT not only resists protein fouling effectively, but also has very weak Raman activity compared to 4-MPBA. Thus, the CBT SAM provides a stealth surface modification to SERS-active substrates. The surface compositions of mixed SAMs were investigated using X-ray photoelectron spectroscopy (XPS) and SERS, and their nonfouling properties were studied with a surface plasmon resonance (SPR) biosensor. The mixed SAM with a surface composition of 94% CBT demonstrated a very low bovine serum albumin (BSA) adsorption (â¼3 ng/cm(2)), and moreover, only the 4-MPBA signal appeared in the SERS spectrum. With the use of this surface-modified SERS-active substrate, quantification of fructose over clinically relevant concentrations (0.01-1 mM) was achieved. Partial least-squares regression (PLS) analysis showed that the detection sensitivity and accuracy were maintained for the measurements in 1 mg/mL BSA solutions. This stealth surface modification strategy provides a novel route to introduce nonfouling property to SERS-active substrates for SERS biosensing in complex media.
Asunto(s)
Técnicas Biosensibles/métodos , Albúmina Sérica Bovina/química , Espectrometría Raman/métodos , Animales , Betaína/química , Ácidos Borónicos/química , Bovinos , Fructosa/análisis , Soluciones , Compuestos de Sulfhidrilo/química , Propiedades de SuperficieRESUMEN
We demonstrate porous silicon biological probes as a stable and non-toxic alternative to organic dyes or cadmium-containing quantum dots for imaging and sensing applications. The fluorescent silicon quantum dots which are embedded on the porous silicon surface are passivated with carboxyl-terminated ligands through stable Si-C covalent bonds. The porous silicon bio-probes have shown photoluminescence quantum yield around 50% under near-UV excitation, with high photochemical and thermal stability. The bio-probes can be efficiently conjugated with antibodies, which is confirmed by a standard enzyme-linked immunosorbent assay (ELISA) method.