Vertical Control in Molar Distalization by Clear Aligners: A Systematic Review and Meta-Analysis.

Background: Molar distalization is used to correct molar relationships or to create space for mild anterior crowding. However, whether clear aligners can provide proper vertical control with the sequential distalization strategy has been highly debated. Thus, the current study aimed to systematically review the amount of dentoskeletal changes in the vertical dimension that results from sequential molar distalization in clear aligner therapy without temporary anchorage devices (TADs). Methods: Registered with PROSPERO (CRD42023447211), relevant original studies were screened from seven databases and supplemented by a manual search by two investigators independently. Articles were screened against inclusion and exclusion criteria, and a risk of bias assessment was conducted for each included article. Relevant data were extracted from the included articles and meta-analysis was performed using RStudio. Results: Eleven articles (nine for maxillary distalization and two for mandibular distalization) were selected for the final review. All studies have a high or medium risk of bias. For maxillary molar distalization, the meta-analysis revealed 0.26 mm [0.23 mm, 0.29 mm] of maxillary first molar intrusion based on post-distalization dental model analysis, as well as 0.50 mm [-0.78 mm, 1.78 mm] of maxillary first molar intrusion and 0.60 mm [-0.42 mm, 1.62 mm] of maxillary second molar intrusion based on post-treatment lateral cephalometric analysis. Skeletally, there was a -0.33° [-0.67°, 0.02°] change in the SN-GoGn angle, -0.23° [-0.30°, 0.75°] change in the SN-MP angle, and 0.09° [-0.83°, 1.01°] change in the PP-GoGn angle based on post-treatment lateral cephalometric analysis. There was insufficient data for meta-analysis for mandibular molar distalization. Conclusions: No significant changes in vertical dimension were observed, both dentally and skeletally, after maxillary molar distalization with a sequential distalization strategy. However, further studies on this topic are needed due to the high risk of bias in the currently available studies.

Effects of Plasma Treatment on the Strength of Bonding to Ceramic Surfaces in Orthodontics-A Comprehensive Review.

Over the past several decades, orthodontic treatment has been increasingly sought out by adults, many of whom have undergone restorative dental procedures that cover enamel. Because the characteristics of restorative materials differ from those of enamel, typical bonding techniques do not yield excellent restoration-bracket bonding strengths. Plasma treatment is an emerging surface treatment that could potentially improve bonding properties. The purpose of this paper is to evaluate currently available studies assessing the effect of plasma treatment on the shear bond strength (SBS) and failure mode of resin cement/composite on the surface of ceramic materials. PubMed and Google Scholar databases were searched for relevant studies, which were categorized by restorative material and plasma treatment types that were evaluated. It was determined that cold atmospheric plasma (CAP) treatment using helium and H2O gas was effective at raising the SBS of feldspathic porcelain to a bonding agent, while CAP treatment using helium gas might also be a potential treatment method for zirconia and other types of ceramics. More importantly, CAP treatment using helium has the potential for being carried out chairside due to its non-toxicity, low temperature, and short treatment time. However, because all the studies were conducted in vitro and not tested in an orthodontic setting, further research must be conducted to ascertain the effectiveness of specific plasma treatments in comparison to current orthodontic bonding treatments in vivo.

Mandibular alveolar bone thickness in untreated Class I subjects with different vertical skeletal patterns: a cone-beam computed tomography study.

OBJECTIVE: To evaluate the mandibular alveolar bone thickness in untreated skeletal Class I subjects with different vertical skeletal patterns. MATERIALS AND METHODS: A total of 50 preorthodontic treatment cone-beam computed tomography (CBCT) images of a skeletal Class I Chinese population with near-normal occlusion were selected. The buccal and lingual alveolar bone thicknesses of mandibular canines to second molars were measured at 2 mm below the cementoenamel junction (CEJ), mid-root, and root apex levels. Differences in the measurements were analyzed with Mann-Whitney U-test. The correlation between alveolar bone thickness and the sella-nasion-mandibular plane (SN-MP) angle was calculated using Pearson correlation coefficients and linear regression analysis. RESULTS: Buccal alveolar bone was thinner on all mandibular canines to first molars but thicker on second molars in comparison with lingual alveolar bone. Buccal alveolar bone was within 1 mm at the levels of 2 mm below CEJ and mid-root for the canines and first premolars. Significant differences were detected among subjects with different vertical patterns, with a negative correlation between the SN-MP angle and alveolar thickness, especially in the canine and premolar regions. The thinnest buccal and lingual alveolar bone were detected in the high-angle group canine region (0.50 mm at the levels of 2 mm below CEJ and mid-root for the buccal side, 0.90 mm at the level of 2 mm below the CEJ for the lingual side). CONCLUSIONS: To avoid periodontal complications, buccal-lingual movement of the mandibular canines and first premolars should be limited, especially in high-angle patients.

Finite Element Analysis Model for Assessing Expansion Patterns from Surgically Assisted Rapid Palatal Expansion.

Surgically assisted rapid palatal expansion (SARPE) was introduced to release bony resistance to facilitate skeletal expansion in skeletally mature patients. However, asymmetric expansion between the left and right sides has been reported in 7.52% of all SARPE patients, of which 12.90% had to undergo a second surgery for correction. The etiologies leading to asymmetric expansion remain unclear. Finite element analysis has been used to evaluate the stress associated with SARPE in the maxillofacial structures. However, as a collision of the bone at the LeFort I osteotomy sites occurs only after a certain amount of expansion, most of the existing models do not truly represent the force distribution, given that the expansion amount of these existing models rarely exceeds 1 mm. Therefore, there is a need to create a novel finite element model of SARPE that could perform a clinically required amount of expander activation for further analysis of the expansion patterns of the hemimaxillae in all three dimensions. A three-dimensional (3D) skull model from cone beam computed tomography (CBCT) was imported into Mimics and converted into mathematical entities to segment the maxillary complex, maxillary first premolars, and maxillary first molars. These structures were transferred into Geomagic for surface smoothing and cancellous bone and periodontal ligament creation. The right half of the maxillary complex was then retained and mirrored to create a perfectly symmetrical model in SolidWorks. A Haas expander was constructed and banded to the maxillary first premolars and first molars. Finite element analysis of various combinations of buccal osteotomies at different angles with 1 mm clearance was performed in Ansys. A convergence test was conducted until the desired amount of expansion on both sides (at least 6 mm in total) was achieved. This study lays the foundation for evaluating how buccal osteotomy angulation influences the expansion patterns of SARPE.

The skeletal and dental age advancements of children and adolescents with overweight and obesity: A systematic review and meta-analysis.

INTRODUCTION: Over the past decades, a trend of increasing obesity among children has emerged. This study aimed to evaluate and summarize the impacts of overweight and obesity on children's and adolescents' skeletal and dental developmental advancement that may influence orthodontic management. METHODS: Registered with the Prospective Register of Systematic Reviews (registration no. CRD42022347488), this study complies with the 2020 Preferred Reporting Items for Systematic Reviews and Meta-Analyses guideline. Particularly, relevant original studies on skeletal or dental age evaluation were screened from accessible electronic databases and supplemented by hand-searching. Meta-analysis was recruited to calculate differences (and their 95% confidence interval [CI]) between subjects with overweight or obese and normal-weight counterparts. RESULTS: After applying the inclusion and exclusion criteria, 17 articles were selected for the final review. Two of the 17 selected studies were found to have a high risk of bias and moderate the other 15. A meta-analysis detected no statistically significant difference in skeletal age between children and adolescents with overweight and normal-weight counterparts (P = 0.24). However, the dental age of children and adolescents with overweight was found to be 0.49 years (95% CI, 0.29-0.70) advanced in comparison with normal-weight counterparts (P <0.00001). In contrast, children and adolescents with obesity were found to have advanced skeletal age by 1.17 (95% CI, 0.48-1.86) years (P = 0.0009) and dental age by 0.56 (95% CI, 0.37-0.76) years (P <0.00001) compared with their normal-weight counterparts. CONCLUSION: Because the orthopedic outcomes of the orthodontic intervention are closely tied to the skeletal age of the patients, these results suggest that the orthodontic evaluation and treatment of children and adolescents with obesity might occur earlier than that of the normal-weight population.

Sagittal and Vertical Changes of the Maxilla after Surgically Assisted Rapid Palatal Expansion: A Systematic Review and Meta-Analysis.

Surgically assisted rapid palatal expansion (SARPE) is often performed to correct the transverse deficiency in the maxilla for skeletally mature patients. However, there is little consensus on the sagittal and vertical displacement of the maxilla after SARPE. This systematic review aims to analyze the position changes of the maxilla in the sagittal and vertical dimensions after the completion of SARPE. Registered with PROSPERO (registration number: CRD42022312103), this study complied with the 2020 PRISMA guideline and was conducted on 21 January 2023. Original studies were screened from MEDLINE (PubMed), Elsevier (SCOPUS), and Cochrane, and supplemented by hand-searching. Cephalometric changes of skeletal vertical and sagittal measurements were the focus. A fixed-effects model was applied in R for meta-analysis. After applying inclusion and exclusion criteria, seven articles were included in the final review. Four studies had a high risk of bias, and the other three had a medium risk of bias. Meta-analysis revealed that the SNA angle increased by 0.50° ± 0.08° (95% confidence interval, 0.33° to 0.66°), and the SN-PP angle increased by 0.60° ± 0.09° (95% confidence interval, 0.41° to 0.79°) after SARPE. In summary, the maxilla displayed statistically significant forward and clockwise downward movement after SARPE. However, the amounts were small and might not be clinically significant. Due to the high risk of bias of included studies, our results must be taken cautiously. Future studies are needed to discern the effects of direction and angulation of the osteotomies of SARPE on the displacement of the maxilla.

Transverse growth of the mandibular body in untreated children: a longitudinal CBCT study.

OBJECTIVES: Currently available reports on mandibular transverse growth are limited to two-dimensional images and cross-sectional studies. The objective of this study was to examine transverse growth of the mandibular body in untreated growing individuals during the mixed dentition stage using longitudinal three-dimensional imaging. METHODS: CBCT images of 25 (13 females and 12 males) untreated subjects at two time points were analyzed. The average age was 9.1 years at T1 and 11.3 years at T2. Mandibular segmentation and superimposition were performed to obtain linear and angular measurements at different axial levels. RESULTS: At the superior (mental foramen) axial level, transverse growth between the buccal surfaces gradually increased from the premolars to the ramus. At the inferior axial level, significant transverse growth differences were detected between the ramus and the dentition regions. In contrast, between the lingual surfaces, both superior and inferior levels showed minimal change in the region under the dentition and a significant amount of resorption in the ramus region. This difference between buccal and lingual surface changes led to a mandibular body angulation change in the premolar and molar regions. In contrast, the overall mandibular body angulation measured from the posterior-most border of the mandible to the symphysis remained the same. Differences were detected between males and females, with males tending to exhibit greater transverse growth in the ramus region at the inferior level. CONCLUSIONS: The mandibular body exhibited different transverse growth patterns at different axial levels. Differences were also found between genders. CLINICAL RELEVANCE: An in-depth understanding of craniofacial growth and development is crucial to diagnosis and treatment planning. The current study provides additional insight into the transverse growth of the mandible.

Accurate gingival segmentation from 3D images with artificial intelligence: an animal pilot study.

BACKGROUND: Gingival phenotype plays an important role in dental diagnosis and treatment planning. Traditionally, determining the gingival phenotype is done by manual probing of the gingival soft tissues, an invasive and time-consuming procedure. This study aims to evaluate the feasibility and accuracy of an alternatively novel, non-invasive technology based on the precise 3-dimension (3D) soft tissue reconstruction from intraoral scanning and cone beam computed tomography (CBCT) to predict the gingival biotype. METHODS: As a proof-of-concept, Yorkshire pig mandibles were scanned, and the CBCT data were fed into a deep-learning model to reconstruct the teeth and surrounding bone structure in 3D. By overlaying the CBCT scan with the intraoral scans, an accurate superposition was created and used for virtual measurements of the soft tissue thickness. Meanwhile, gingival thicknesses were also measured by a periodontal probe and digital caliper on the buccal and lingual sides at 3 mm apical to the gingival margin of the posterior teeth and compared with the virtual assessment at the same location. The data obtained from virtual and clinical measurements were compared by Wilcoxon matched-pairs signed-rank analysis, while their correlation was determined by Pearson's r value. The Mann-Whitney U test was used for intergroup comparisons of the amount of difference. RESULTS: Among 108 investigated locations, the clinical and virtual measurements are strongly positively correlated (r = 0.9656, P < 0.0001), and only clinically insignificant differences (0.066 ± 0.223 mm) were observed between the two assessments. There is no difference in the agreement between the virtual and clinical measurements on sexually matured samples (0.087 ± 0.240 mm) and pre-pubertal samples (0.033 ± 0.195 mm). Noticeably, there is a greater agreement between the virtual and clinical measurements at the buccal sites (0.019 ± 0.233 mm) than at the lingual sites (0.116 ± 0.215 mm). CONCLUSION: In summary, the artificial intelligence-based virtual measurement proposed in this work provides an innovative technique potentially for accurately measuring soft tissue thickness using clinical routine 3D imaging systems, which will aid clinicians in generating a more comprehensive diagnosis with less invasive procedures and, in turn, optimize the treatment plans with more predictable outcomes.

Cone-beam computed tomography use in postgraduate orthodontic programs in North America and Europe.

OBJECTIVES: Cone-beam computed tomography (CBCT) has emerged over recent decades as a rapid acquisition technology that allows practitioners to view the craniofacial complex in high spatial detail. This study aimed to assess the latest trend of CBCT use in postgraduate orthodontic programs in North America and Europe/Australia. METHODS: An electronic multiple-choice survey was sent via email requesting anonymous participation of postgraduate orthodontic program directors: 73 in North America (as listed on the American Association of Orthodontists website) and 189 in Europe/Australia (as listed on the European Orthodontic Society website). Survey collection was over a 2-month period with two follow-up emails sent 2 weeks and 1 month after the initial email to each program director who had not responded. Responses were collected directly on Qualtrics for analysis. RESULTS: The response rate was 46.6% (34 responses) for North America and 11.1% (21 responses) for Europe/Australia. Results revealed that 100% of respondents from North America had access to a CBCT scanner, while 90.48% of respondents (19 responses) from Europe/Australia had access. Most North American postgraduate orthodontic programs have CBCT scanners within their clinic, while most European/Australian programs do not, and they refer patients to the radiology department. Although there is a higher percentage of programs in North America compared to Europe/Australia that use CBCT as part of routine orthodontic records for all patients, most programs in both regions use CBCT imaging for specific diagnostic purposes and not for routine records. CONCLUSION: Overall, North American programs have more access to CBCT scanners in postgraduate clinics and use CBCT imaging more routinely than European/Australian programs.

Mandibular transverse dentoalveolar and skeletal changes associated with lip bumper and rapid maxillary expander: A cone-beam computed tomography study.

INTRODUCTION: Currently, there is little consensus regarding the spontaneous uprighting of the mandibular dentoalveolar complex in response to maxillary expansion, which poses the question about the necessity of combining mandibular treatment with rapid maxillary expansion to coordinate the maxilla and mandible transversely. This study aimed to evaluate the effects of the bonded rapid maxillary expander (RME) alone compared with RME with lip bumper (LB) treatment on the mandibular transverse changes. METHODS: This retrospective study analyzed 3 groups: the control group with no orthodontic or orthopedic treatment (23 patients [14 females, 9 males]; mean age 9.13 years at T1 and 11.24 years at T2); the RME group with no mandibular treatment (22 patients [9 females, 13 males]; mean age 8.73 years at T1 and 12.04 years at T2); and RME + LB group (23 patients [16 females, 7 males]; mean age 9.45 years at T1 and 12.18 years at T2). Three-dimensional superimposition of the mandibular images was performed with cone-beam computed tomography taken at prephase and postphase I treatment (growth and development check records for the control group) to conduct the angular and linear measurements at the dental, alveolar, and skeletal levels. The intergroup comparisons were performed using the Mann-Whitney U-test. RESULTS: Accompanying slight molar self-uprighting during the normal mandibular growth period observed in the control group, transverse growth was also observed in both alveolar and basal bone levels of the mandible, but no significant changes in the alveolar bone inclination occurred. The bonded RME slightly increased the mandibular first molar uprighting but not the mandibular widths at the tooth or alveolar levels. Adding a LB significantly increased the intermolar width and molar uprighting while decreasing the alveolar bone inclination but did not increase the amount of mandibular transverse growth at the bone level. CONCLUSIONS: RME alone did not significantly increase the transverse dimension of the mandible. RME + LB significantly increased mandibular intermolar width, uprighted the mandibular molars, and reduced the alveolar bone inclination.

Buccolingual Inclination of Second Molars in Untreated Adolescents and Adults with Near Normal Occlusion: A CBCT Study.

The mandibular second molars are lingually positioned relative to the alveolar ridge and have a limited amount of lingual alveolar bony support. As the maxillary second molars are articulated with the mandibular second molars, maintaining the normal buccolingual inclination of both maxillary and mandibular second molars would potentially help to not only optimize the masticatory function, but also avoid dehiscence and fenestration. The current study evaluated the buccolingual inclination of second molars in untreated adolescents and adults. One hundred and two Caucasian subjects with skeletal class I and minimum dental arch crowding/spacing were selected and divided into two groups: (1) adolescent group: age 12-18 years, N = 51 (21 females, 30 males); (2) adult group: age 19-65 years, N = 51 (40 females, 11 males). For each subject, the inclination for each second molar was measured as the angle between the long axis of each tooth and a vertical line on cone beam computed tomography images. The Mann-Whitney U test was used for intergroup comparisons. Maxillary second molars exhibited a buccal inclination of 15.30° in the adolescent group and 15.70° in the adult group. Mandibular second molars exhibited a lingual inclination of 17.05° in the adolescent group and 15.20° in the adult group. No statistically significant differences were detected between the age groups. In addition, a statistically significant difference was only found between genders in the adolescent group for the maxillary second molar inclination. In summary, maxillary second molars exhibited buccal inclination and mandibular second molars exhibited lingual inclination. The amount of buccolingual inclination of the second molars was similar in the adolescent and adult groups.

Lip Bumper Therapy Does Not Influence the Sagittal Mandibular Incisor Position in a Retrospective CBCT Study.

Lip bumper (LB) therapy is used as a treatment approach for mild to moderate crowding without extraction of teeth. Previous studies demonstrated that LB increases arch length through molar uprighting and lateral expansion. However, the effects of LB on mandibular incisors are inconclusive. The controversial results from different studies may be due to limitations including absence of a control group and/or use of 2D radiography. To address this issue, the current retrospective longitudinal CBCT study compared a rapid maxillary expansion (RME) group with no lower treatment [16 patients (9 females, 7 males); median age 8.86 years at T1 and 11.82 years at T2] and an RME + LB group [18 patients (13 females, 5 males); median age 9.46 years at T1 and 12.10 years at T2]. The CBCTs taken before and after phase 1 treatment were 3D superimposed based on the mandibular structure and were measured to determine the angular and linear changes of the mandibular incisors over the course of LB treatment. For comparisons between different timepoints within a group, a Wilcoxon matched-pairs signed rank test was used. For intergroup comparisons, a Mann-Whitney U test was used. Both groups showed eruption and protrusion of the mandibular incisors during the observation period, while there was no significant change in proclination of the lower incisors. When comparing the discrepancy of change between groups, there was no statistically significant difference detected. In summary, by utilizing a longitudinal 3D database, the current study demonstrated that the effect of LB on the position of the mandibular incisors is limited.

Asymmetric Maxillary Expansion Introduced by Surgically Assisted Rapid Palatal Expansion: A Systematic Review.

PURPOSE: A commonly reported complication of surgically assisted rapid palatal expansion (SARPE) that has not been explored extensively is uneven expansion between left and right sides, which requires secondary surgery for correction. This systematic review aims to analyze the prevalence and potential causes of asymmetric expansion in the transverse dimension after SARPE to guide the clinical practice. METHODS: Electronic databases and manual search were used to search for original articles published on SARPE on March 11, 2022. Original human studies that recorded the number and percentage of asymmetric expansion after two-piece SARPE were included. The 2020 Preferred Reporting Items for Systemic Reviews and Meta-Analyses guideline was implemented for the quality assessment and data analysis of the included articles. The study was registered at the International Prospective Register of Systematic Reviews under the number CRD42022300782. RESULTS: After applying inclusion and exclusion criteria, 13 articles were included in the final review. The risk of bias was high in 8 studies and medium in the other 5 studies. Overall, the prevalence of asymmetric expansion in the transverse dimension (different amount of expansion between left and right sides) was 7.52%, with 12.90% of patients involved receiving a second surgery for correction. Expander design did not significantly affect the rate of asymmetry expansion. Pterygomaxillary fissure release significantly increased the rate of asymmetry expansion (11.02% vs 5.08%, P < .001). In comparison, lateral nasal wall osteotomy (4.26% vs 14.77%, P < .001) and release of the nasal septum (5.22% vs 17.15%, P < .001) significantly lowered the rate of asymmetry expansion, respectively. CONCLUSIONS: Asymmetric dentoskeletal expansion between left and right sides is a common complication of SARPE procedures, mostly caused by variations in surgical cuts. However, the risk of bias in currently available publications is high. Further studies are warranted to fully understand the causes of asymmetric expansion.

Impact of Frontier Development of Alveolar Bone Grafting on Orthodontic Tooth Movement.

Sufficient alveolar bone is a safeguard for achieving desired outcomes in orthodontic treatment. Moving a tooth into an alveolar bony defect may result in a periodontal defect or worse-tooth loss. Therefore, when facing a pathologic situation such as periodontal bone loss, alveolar clefts, long-term tooth loss, trauma, and thin phenotype, bone grafting is often necessary to augment bone for orthodontic treatment purposes. Currently, diverse bone grafts are used in clinical practice, but no single grafting material shows absolutely superior results over the others. All available materials demonstrate pros and cons, most notably donor morbidity and adverse effects on orthodontic treatment. Here, we review newly developed graft materials that are still in the pre-clinical stage, as well as new combinations of existing materials, by highlighting their effects on alveolar bone regeneration and orthodontic tooth movement. In addition, novel manufacturing techniques, such as bioprinting, will be discussed. This mini-review article will provide state-of-the-art information to assist clinicians in selecting grafting material(s) that enhance alveolar bone augmentation while avoiding unfavorable side effects during orthodontic treatment.

En-Mass Retraction of Maxillary Anterior Teeth with Severe Proclination and Root Resorption-A Case Report.

Molar distalization has been a validated method to correct dental sagittal relationships and create space to relieve mild to moderate crowding. In the current case report, an adult female patient had a mild skeletal Class III relationship and dental Class III molar relationship. Four premolars and one lower incisor were extracted during the previous two rounds of orthodontic treatments, and the maxillary anterior teeth were left with severe proclination and root resorption. Limited by the available teeth, extraction was not an option for her. Thus, molar distalization with TADs was the best option used in the treatment to address her chief complaint. In addition, a proper bite opening was performed to eliminate occlusion trauma. Utilizing the mid-palatal TADs, the maxillary central incisors were retracted 7.9 mm and retroclined 33 degrees, and the molar distalization was achieved as much as 8 mm. The cross-section slices of CBCT images confirmed the proper retraction of maxillary incisors and well-positioned roots in the alveolar bone. Moreover, the root resorption was not worsened from the treatment. Clinically, the maxillary anterior teeth were preserved esthetically and functionally. This case report illustrates that with proper diagnosis and treatment mechanics, significant tooth movement can be achieved even on extremely proclined maxillary incisors with severe root resorption.

Transverse Analysis of Maxilla and Mandible in Adults with Normal Occlusion: A Cone Beam Computed Tomography Study.

Objectives: To study the transverse widths of maxilla and mandible and their relationship with the inclination of first molars. Materials and Methods: Fifty-six untreated adults (12 males, 44 females) with normal occlusion were included. On each Cone Beam Computed Tomography (CBCT) image of the subject, inter-buccal and inter-lingual bone widths were measured at the levels of hard palate, alveolar crest and furcation of the first molars, and maxillomandibular width differentials were calculated. In addition, the buccolingual inclination of each first molar was measured and its correlation with the maxillomandibular width differential was tested. Results: At the furcation level of the first molar, the maxillary inter-buccal bone width was more than the mandibular inter-buccal bone width by 1.1 ± 4.5 mm for males and 1.6 ± 2.9 mm for females; the mandibular inter-lingual bone width was more than the maxillary inter-lingual bone width by 1.3 ± 3.6 mm for males and 0.3 ± 3.2 mm for females. For females, there was a negative correlation between the maxillomandibular inter-lingual bone differential and maxillary first molar buccal inclination (p < 0.05), and a positive correlation between the maxillomandibular inter-lingual bone differential and mandibular first molar lingual inclination (p < 0.05). Conclusions: This is a randomized clinical study on transverse analysis of maxilla and mandible in adults with normal occlusion using CBCTs. On average: (1) At the furcation level of the first molars, the maxillary inter-buccal bone width was slightly wider than mandibular inter-buccal bone width; whereas the mandibular inter-lingual bone width was slightly wider than maxillary inter-lingual bone width; (2) A statistically significant correlation existed between the maxillomandibular transverse skeletal differentials and molar inclinations.

Maxillary sinus dimensions in skeletal class II population with different vertical skeletal patterns.

OBJECTIVES: The location of the maxillary sinus significantly affects the orthodontic treatment, particularly when temporary anchorage devices (TADs) are taking place. The current study aims to evaluate the maxillary sinus size and location in a skeletal class II population. MATERIALS AND METHODS: The pre-orthodontic treatment CBCT images of the skeletal class II population were selected. The sinus's volumetric size, height, width, and depth were measured and compared among different skeletal vertical patterns and between genders. In addition, the height and width of the alveolar bone surrounding the maxillary sinus floor were quantified in the same manner. RESULTS: Patients who displayed a high-angle skeletal pattern had significantly greater maxillary sinus dimensions, shorter vertical distance between the maxillary sinus floor and the alveolar bone crest, and thinner alveolar bone surrounding the maxillary sinus. Meanwhile, the maxillary sinus dimension measurements were positively correlated with the SN-MP angle in both genders but only correlated with ANB angle in females. On the other hand, the vertical distance between the maxillary sinus floor and the alveolar bone crest was negatively correlated with the SN-MP angle in males but the ANB angle in females. CONCLUSIONS: In the skeletal class II population, the high-angle patients faced a higher risk of maxillary sinus perforations by TADs. In addition, gender-related variations were noticed warranting clinical attention, as males have a higher potential for maxillary sinus penetration from TAD placement than females. CLINICAL RELEVANCE: Maxillary posterior alveolar TADs are often prescribed to achieve the distalization of maxillary posterior teeth in class II patients. The current study provided more insight into the "safe zone" for TAD placement related to the maxillary sinus.

RANKL inhibition halts lesion progression and promotes bone remineralization in mice with fibrous dysplasia.

Fibrous dysplasia (FD) is a rare bone disease caused by GNAS mutation in skeletal stem cells, typically originating from and worsening in childhood. Till now, no cure for FD exists despite the well-recognized etiology. Studies have demonstrated that osteoclastogenesis hyperactivity is caused by elevated RANKL expression, making RANKL inhibition a potential therapy. Although a human monoclonal anti-RANKL antibody, denosumab, has been used in FD patients, the effects and mechanisms of RANKL inhibition for FD treatment require assessment. Denosumab is expensive and can only be injected. Therefore, formulating an oral-administered, cost-effective medicine is encouraged. In the current study, we evaluated the effects of a small-molecule RANKL inhibitor, AS2676293, on a transgenic FD mouse model. AS2676293 effectively suppressed osteoclastogenesis and halted FD progression. The pre-existing bone defects were primarily replaced by newly formed mineralized bone after two weeks of AS2676293 administration. The potent RANKL inhibitory effect and easier route of delivery make AS2676293 a promising target therapy of FD. Results from our study suggested that RANKL inhibition is effective in halting FD progression and promoting bone remineralization, which could benefit the patients with early onset of FD.

Genes and Pathways Associated with Skeletal Sagittal Malocclusions: A Systematic Review.

Skeletal class II and III malocclusions are craniofacial disorders that negatively impact people's quality of life worldwide. Unfortunately, the growth patterns of skeletal malocclusions and their clinical correction prognoses are difficult to predict largely due to lack of knowledge of their precise etiology. Inspired by the strong inheritance pattern of a specific type of skeletal malocclusion, previous genome-wide association studies (GWAS) were reanalyzed, resulting in the identification of 19 skeletal class II malocclusion-associated and 53 skeletal class III malocclusion-associated genes. Functional enrichment of these genes created a signal pathway atlas in which most of the genes were associated with bone and cartilage growth and development, as expected, while some were characterized by functions related to skeletal muscle maturation and construction. Interestingly, several genes and enriched pathways are involved in both skeletal class II and III malocclusions, indicating the key regulatory effects of these genes and pathways in craniofacial development. There is no doubt that further investigation is necessary to validate these recognized genes' and pathways' specific function(s) related to maxillary and mandibular development. In summary, this systematic review provides initial insight on developing novel gene-based treatment strategies for skeletal malocclusions and paves the path for precision medicine where dental care providers can make an accurate prediction of the craniofacial growth of an individual patient based on his/her genetic profile.

The Reliability of Two- and Three-Dimensional Cephalometric Measurements: A CBCT Study.

Cephalometry is a standard diagnostic tool in orthodontic and orthognathic surgery fields. However, built-in magnification from the cephalometric machine produces double images from left- and right-side craniofacial structures on the film, which poses difficulty for accurate cephalometric tracing and measurements. The cone-beam computed tomography (CBCT) images not only allow three-dimensional (3D) analysis, but also enable the extraction of two-dimensional (2D) images without magnification. To evaluate the most reliable cephalometric analysis method, we extracted 2D lateral cephalometric images with and without magnification from twenty full-cranium CBCT datasets; images were extracted with magnification to mimic traditional lateral cephalograms. Cephalometric tracings were performed on the two types of extracted 2D lateral cephalograms and on the reconstructed 3D full cranium images by two examiners. The intra- and inter-examiner intraclass correlation coefficients (ICC) were compared between linear and angular parameters, as well as between CBCT datasets of adults and children. Our results showed that overall, tracing on 2D cephalometric images without magnification increased intra- and inter-examiner reliability, while 3D tracing reduced inter-examiner reliability. Angular parameters and children's images had the lowest inter- and intra-examiner ICCs compared with adult samples and linear parameters. In summary, using lateral cephalograms extracted from CBCT without magnification for tracing/analysis increased reliability. Special attention is needed when analyzing young patients' images and measuring angular parameters.