RESUMEN
Elucidating cellulose-lignin interactions at the molecular and nanometric scales is an important research topic with impacts on several pathways of biomass valorization. Here, the interaction forces between a cellulosic substrate and lignin are investigated. Atomic force microscopy with lignin-coated tips is employed to probe the site-specific adhesion to a cellulose film in liquid water. Over seven thousand force-curves are analyzed by a machine-learning approach to cluster the experimental data into types of cellulose-tip interactions. The molecular mechanisms for distinct types of cellulose-lignin interactions are revealed by molecular dynamics simulations of lignin globules interacting with different cellulose Iß crystal facets. This unique combination of experimental force-curves, data-driven analysis, and molecular simulations opens a new approach of investigation and updates the understanding of cellulose-lignin interactions at the nanoscale.
Asunto(s)
Celulosa , Lignina , Microscopía de Fuerza Atómica , Simulación de Dinámica Molecular , Aprendizaje AutomáticoRESUMEN
Since the discovery of polydopamine (PDA), there has been a lot of progress on using this substance to functionalize many different surfaces. However, little attention has been given to prepare functionalized surfaces for the preparation of flexible electrochemical paper-based devices. After fabricating the electrodes on paper substrates, we formed PDA on the surface of the working electrode using a chemical polymerization route. PDA nanofilms on carbon were characterized by contact angle (CA) experiments, X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy (topography and electrical measurements) and electrochemical techniques. We observed that PDA introduces chemical functionalities (RNH2 and RCâO) that decrease the CA of the electrode. Moreover, PDA nanofilms did not block the heterogeneous electron transfer. In fact, we observed one of the highest standard heterogeneous rate constants (ks ) for electrochemical paper-based electrodes (2.5 ± 0.1) × 10-3 cm s-1 , which is an essential parameter to obtain larger currents. In addition, our results suggest that carbonyl functionalities are ascribed for the redox activity of the nanofilms. As a proof-of-concept, the electrooxidation of nicotinamide adenine dinucleotide showed remarkable features, such as, lower oxidation potential, electrocatalytic peak currents more than 30 times higher when compared to unmodified paper-based electrodes and electrocatalytic rate constant (kobs ) of (8.2 ± 0.6) × 102 L mol-1 s-1 .
Asunto(s)
Indoles , Polímeros , Técnicas Electroquímicas , Electrodos , Oxidación-ReducciónRESUMEN
Cell-penetrating peptides (CPPs) are a topical subject potentially exploitable for creating nanotherapeutics for the delivery of bioactive loads. These compounds are often classified into three major categories according to their physicochemical characteristics: cationic, amphiphilic, and hydrophobic. Among them, the group of hydrophobic CPPs has received increasing attention in recent years due to toxicity concerns posed by highly cationic CPPs. The hexapeptide PFVYLI (P, proline; F, phenylalanine; V, valine; Y, tyrosine; L, leucine; and I, isoleucine), a fragment derived from the C-terminal portion of α1-antitrypsin, is a prototypal example of hydrophobic CPP. This sequence shows reduced cytotoxicity and a capacity of nuclear localization, and its small size readily hints at its suitability as a building block to construct nanostructured materials. In this study, we examine the self-assembling properties of PFVYLI and investigate its ability to form noncovalent complexes with nucleic acids. By using a combination of biophysical tools including synchrotron small-angle X-ray scattering and atomic force microscopy-based infrared spectroscopy, we discovered that this CPP self-assembles into discrete nanofibrils with remarkable amyloidogenic features. Over the course of days, these fibrils coalesce into rodlike crystals that easily reach the micrometer range. Despite lacking cationic residues in the composition, PFVYLI forms noncovalent complexes with nucleic acids that retain ß-sheet pairing found in amyloid aggregates. In vitro vectorization experiments performed with double-stranded DNA fragments indicate that complexes promote the internalization of nucleic acids, revealing that tropism toward cell membranes is preserved upon complexation. On the other hand, transfection assays with splice-correction oligonucleotides (SCOs) for luciferase expression show limited bioactivity across a narrow concentration window, suggesting that the propensity to form amyloidogenic aggregates may trigger endosomal entrapment. We anticipate that the findings presented here open perspectives for using this archetypical hydrophobic CPP in the fabrication of nanostructured scaffolds, which potentially integrate properties of amyloids and translocation capabilities of CPPs.
Asunto(s)
Péptidos de Penetración Celular , Ácidos Nucleicos , Proteínas Amiloidogénicas/genética , Péptidos de Penetración Celular/química , Interacciones Hidrofóbicas e Hidrofílicas , Ácidos Nucleicos/metabolismo , Oligonucleótidos/genética , TransfecciónRESUMEN
The pursuit of biocompatible, breathable and skin-conformable wearable sensors has predominantly focused on synthetic stretchable hydrophobic polymers. Microbial nanocellulose (MNC) is an exceptional skin-substitute natural polymer routinely used for wound dressing and offers unprecedented potential as substrate for wearable sensors. A versatile strategy for engineering wearable sensing platforms is reported, with sensing units made of screen-printed carbon electrodes (SPCEs) on MNC. As-prepared SPCEs were used to detect the toxic metals cadmium (Cd2+) and lead (Pb2+) with limits of detection of 1.01 and 0.43 µM, respectively, which are sufficient to detect these metal ions in human sweat and urine. SPCEs functionalized through anodic pre-treatments were used for detecting uric acid and 17ß-estradiol in artificial sweat, with detection limits of 1.8 µM and 0.58 µM, respectively. The electrochemical treatment created oxygen groups on the carbon surfaces, thus improving wettability and hydrophilicity. MNC was herein exploited as an adhesive-free, yet highly skin-adherent platform for wearable sensing devices that also benefit from the semi-permeable, non-allergenic, and renewable features that make MNC unique within the pool of materials that have been used for such a purpose. Our findings have clear implications for the developments on greener and more biocompatible but still efficient substrates and may pave the route for combining immunosensing devices with drug delivery therapies.
Asunto(s)
Sudor , Dispositivos Electrónicos Vestibles , Biomarcadores , Electrodos , Humanos , IonesRESUMEN
The interaction of single-layer graphene oxide (SLGO) and multi-layered graphene oxide (MLGO) with a cell culture medium (i.e. DMEM) was studied by evaluating fetal bovine serum (FBS) protein corona formation towards in vitro nanotoxicity assessment and nanobiointeractions. SLGO and MLGO exhibited different colloidal behavior in the culture medium, which was visualized by cryogenic transmission electron microscopy in situ analysis. Exploring proteomics and bioinformatics tools, 394 and 290 proteins were identified on the SLGO and MLGO hard corona compositions, respectively. From this amount, 115 proteins were exclusively detected on the SLGO and merely 11 on MLGO. SLGO enriched FBS proteins involved in metabolic processes and signal transduction, while MLGO enriched proteins involved in cellular development/structure, and lipid transport/metabolic processes. Such a distinct corona profile is due to differences on surface chemistry, aggregation behavior and the surface area of GO materials. Hydrophilic interactions were found to play a greater role in protein adsorption by MLGO than SLGO. Our results point out implications for in vitro studies of graphene oxide materials concerning the effective dose delivered to cells and corona bioactivity. Finally, we demonstrated the importance of integrating conventional and modern techniques thoroughly to understand the GO-FBS complexes towards more precise, reliable and advanced in vitro nanotoxicity assessment.
Asunto(s)
Proteínas Sanguíneas/química , Medios de Cultivo/química , Grafito/química , Nanopartículas/toxicidad , Corona de Proteínas/química , Pruebas de Toxicidad , Animales , Bovinos , Proteómica , AguaRESUMEN
There is a growing appreciation that engineered biointerfaces can regulate cell behaviors, or functions. Most systems aim to mimic the cell-friendly extracellular matrix environment and incorporate protein ligands; however, the understanding of how a ligand-free system can achieve this is limited. Cell scaffold materials comprised of interfused chitosan-cellulose hydrogels promote cell attachment in ligand-free systems, and we demonstrate the role of cellulose molecular weight, MW, and chitosan content and MW in controlling material properties and thus regulating cell attachment. Semi-interpenetrating network (SIPN) gels, generated from cellulose/ionic liquid/cosolvent solutions, using chitosan solutions as phase inversion solvents, were stable and obviated the need for chemical coupling. Interface properties, including surface zeta-potential, dielectric constant, surface roughness, and shear modulus, were modified by varying the chitosan degree of polymerization and solution concentration, as well as the source of cellulose, creating a family of cellulose-chitosan SIPN materials. These features, in turn, affect cell attachment onto the hydrogels and the utility of this ligand-free approach is extended by forecasting cell attachment using regression modeling to isolate the effects of individual parameters in an initially complex system. We demonstrate that increasing the charge density, and/or shear modulus, of the hydrogel results in increased cell attachment.
RESUMEN
This work reports, for the first time, the excellent performance of an aqueous alkaline solution of cellulose as an adhesive for wet and dry cellulosic substrates. Uniaxial tensile tests of filter paper and sulfite writing paper strips bonded with this adhesive (5% cellulose and 7% NaOH aqueous solution) show that failure never occurs in the joints but always in the pristine substrate areas, except in butt joint samples prepared with sulfite paper. Tensile test also shows that paper impregnated with cellulose solution is stronger than the original substrate. X-ray microtomography and scanning electron microscopy reveal that dissolved cellulose fills the gaps between paper fibers, providing a morphological evidence for the mechanical interlocking adhesion mechanism, while scanning probe techniques provide a sharp view of different domains in the joints. Additionally, bonded paper is easily reconverted to pulp, which facilitates paper reprocessability, solving a well-known industrial problem related to deposition of adhesive aggregates (stickies) on the production equipment.
RESUMEN
The sorption of surfactants and NaCl in silica nanosized particles creates unexpected spatial distributions of solutes that were evidenced by electron spectroscopy imaging in the transmission electron microscope (ESI/TEM). The spectral images show that simple ions (Na(+), Cl(-), Br(-)) are actually absorbed within the particles irrespective of their charges, while surfactant chains are adsorbed at the particle surfaces. The expected effect of the surfactants on particle aggregation is also observed in the micrographs. In the case of salt, close-packed silica particle arrays are formed at low ionic strength, but only coarse aggregates form at higher salt concentrations. The particles absorb both Na(+) and Cl(-) ions in similar amounts, from 0.5 mol L(-)(1) NaCl, but Na(+) ions are depleted from the particles' immediate outer vicinity, where Cl(-) ions are in turn accumulated. These results confirm that Stöber silica nanoparticles are highly porous and reveal their potential usefulness as carriers of small molecules and ions, due to the small particle size, exceptional colloidal stability, and this newly found sorption behavior.
RESUMEN
The polarization of interdigitated gold electrodes mounted over a silica thin film formed by oxidation of a Si wafer produces reproducible electrostatic patterns with overall excess negative charge, as observed by scanning electric potential microscopy. Domain charge concentrations as high as 76 charge units per square micrometer are obtained when a 5 V difference is applied to the electrodes thus producing fields in the 10(6) V m(-1) range. These patterns vanish when the electrodes are short-circuited and grounded. Characteristic times for pattern formation and relaxation are in the order of 10 min. The results are consistent with a model based on the discharge of H(+) ions at the negative electrodes, leaving behind immobile surface-bound SiO(-) groups and thus showing that chemisorption phenomena are decisive for electrostatic charging of insulators.