RESUMEN
BACKGROUND AND OBJECTIVES: The outcomes of patients with atypical subtrochanteric fractures (ASFs) remain unclear. Data from a large international geriatric trauma registry were analysed to examine the outcome of patients with ASFs compared to patients with typical osteoporotic subtrochanteric fractures (TSFs). MATERIALS AND METHODS: Data from the Registry for Geriatric Trauma of the German Trauma Society (Deutsche Gesellschaft für Unfallchirurgie [DGU]) (ATR-DGU) were analysed. All patients treated surgically for ASFs or TSFs were included in this analysis. Across both fracture types, a paired matching approach was conducted, where statistical twins were formed based on background characteristics sex, age, American Society of Anesthesiologists (ASA) score and walking ability. In-house mortality and mortality rates at the 120-day follow-up, as well as mobility at 7 and 120 days, the reoperation rate, hospital discharge management, the hospital readmission rate at the 120-day follow-up, health-related quality of life, type of surgical treatment and anti-osteoporotic therapy at 7 and 120 days, were assessed as outcome measures using a multivariate logistic regression analysis. RESULTS: Amongst the 1,800 included patients, 1,781 had TSFs and 19 had ASFs. Logistic regression analysis revealed that patients with ASFs were more often treated with closed intramedullary nailing (RR = 3.59, p < 0.001) and had a higher probability of vitamin D supplementation as osteoporosis therapy at 120 days (RR = 0.88, p < 0.002). Patients with ASFs were also more likely to live at home after surgery (RR = 1.43, p < 0.001), and they also tended to continue living at home more often than patients with TSFs (RR = 1.33, p < 0.001). Accordingly, patients with TSFs had a higher relative risk of losing their self-sufficient living status, as indicated by increased rates of patients living at home preoperatively and being discharged to nursing homes (RR = 0.19, p < 0.001) or other hospitals (RR = 0.00, p < 0.001) postoperatively. CONCLUSIONS: Surgical treatment of ASFs was marked by more frequent use of closed intramedullary fracture reduction. Furthermore, patients with ASFs were more likely to be discharged home and died significantly less often in the given timeframe. The rate of perioperative complications, as indicated by nonsignificant reoperation rates, as well as patient walking abilities during the follow-up period, remained unaffected.
Asunto(s)
Fracturas de Cadera , Sistema de Registros , Humanos , Masculino , Femenino , Anciano , Anciano de 80 o más Años , Alemania/epidemiología , Fracturas de Cadera/cirugía , Resultado del Tratamiento , Análisis por Apareamiento , Fracturas Osteoporóticas/cirugía , Fijación Intramedular de Fracturas/métodos , Fijación Intramedular de Fracturas/estadística & datos numéricos , Calidad de Vida , Reoperación/estadística & datos numéricosRESUMEN
BACKGROUND: Avascular osteonecrosis of the femoral head (AVN) often results in total hip arthroplasty (THA). The cause for increased THA revision rates among patients with AVN is not yet fully understood. PURPOSE: To perform a comparative radiological analysis of implant integration between patients with AVN and osteoarthritis (OA). MATERIAL AND METHODS: After a matched pair analysis of 58 patients, 30 received THA due to OA, 28 due to AVN. X-ray images were evaluated after one week ("baseline") and on average 37.58 months postoperatively ("endline"). The prosthesis was grouped into 10 regions of interest (ROI): seven femoral and three acetabular. Incidence, width, and extent of "radiolucent lines" were measured within each zone. RESULTS: Between baseline and endline, width and extent progressed more noticeably in all femoral and acetabular zones among patients with AVN. In femoral ROI 1, the width increased in 40% of AVN cases compared to 6.7% of OA cases. For acetabular ROI 3, the width increased in 26.7% of AVN cases compared to no perceived changes in the OA group. No signs of prosthetic loosening were found in the AVN group. CONCLUSION: The increase of width and extent of radiolucent lines over time in patients with AVN could be a sign of lack of osteointegration. However, prosthetic loosening in absence of clinical symptoms cannot be deduced from radiological findings after medium-term postoperative follow-up. Further long-term studies are required to monitor how radiolucent lines develop in respect to long-term implant loosening. Dependent on bone quality, individually adapted reaming and broaching of the implant site are recommended.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Necrosis de la Cabeza Femoral , Prótesis de Cadera , Osteoartritis , Humanos , Prótesis de Cadera/efectos adversos , Necrosis de la Cabeza Femoral/diagnóstico por imagen , Necrosis de la Cabeza Femoral/cirugía , Cabeza Femoral , Resultado del Tratamiento , Falla de Prótesis , Estudios RetrospectivosRESUMEN
OBJECTIVE: Femoral head necrosis (FHN) affects mostly young and active people. The most common operative therapy is core decompression (CD) with optional cancellous bone grafting (CBG). Because little information is available on the long-term results of these procedures, we investigated the effectiveness of CD and CD + CBG in patients with ARCO stage II FHN in terms of postoperative pain, range of motion, patient-reported outcome measures (Harris Hip Score, Hip Disability and Osteoarthritis Outcome Score, EuroQol 5D, and Short Form 36 Questionnaire), and disease progression. METHODS: We retrospectively compared 11 patients treated with CD alone 48.0 months (range, 26.3-68.5 months) postoperatively versus 11 patients treated with CD + CBG 69.2 months (range, 38.0-92.9 months) postoperatively. All patients were assessed according to a routine clinical protocol involving a clinical examination, questionnaires, and radiological imaging (X-ray and magnetic resonance imaging). RESULTS: The clinical and radiological results showed no significant differences between the two groups. Both interventions demonstrated equal results according to clinical scores. CONCLUSIONS: Our data may encourage application of the less invasive technique of CD alone without CBG, which is more surgically demanding. Further prospective studies with longer follow-up are necessary to clarify the risk factors for therapy failure.
Asunto(s)
Necrosis de la Cabeza Femoral , Humanos , Necrosis de la Cabeza Femoral/diagnóstico por imagen , Necrosis de la Cabeza Femoral/cirugía , Necrosis de la Cabeza Femoral/patología , Estudios Retrospectivos , Cabeza Femoral/diagnóstico por imagen , Cabeza Femoral/cirugía , Cabeza Femoral/patología , Estudios Prospectivos , Hueso Esponjoso/cirugía , Resultado del Tratamiento , Descompresión Quirúrgica/métodos , Trasplante Óseo , Estudios de SeguimientoRESUMEN
INTRODUCTION: Avascular osteonecrosis of the femoral head (AVN) is a widespread disease affecting mostly young and active people, often exacerbating in progressive stages, ending in joint replacement. The most common joint preserving operative therapy for early stages is core decompression (CD), optional with cancellous bone grafting (CBG). For success it is vital that the necrotic area is hit and the sclerotic rim is broken by drilling into the defect zone to relieve intraosseous pressure. The aim of this study was to investigate if both techniques are precise enough to hit the center of the necrosis and if there is a difference in precision between drilling with small pins (CD) and the trephine (CBG). PATIENTS AND METHODS: 10 patients underwent CD, 12 patients CBG with conventional C-arm imaging. Postoperatively 3D MRI reconstructions of the necrotic area and the drilling channels were compared. The deviation of the drilling channel from the center of the necrotic area was measured. PROMs (HHS, HOOS, EQ-5D, SF-36) were evaluated to compare the clinical success of these procedures. RESULTS: Neither with CD nor with CBG the defect zone was missed. The drilling precision of both procedures did not differ significantly: distance to center 3.58 mm for CD (range 0.0-14.06, SD 4.2) versus 3.91 mm for CBG (range 0.0-15.27, SD 4.7). PROMs showed no significant difference. CONCLUSION: Concerning the most important difference between the two procedures-the surgical higher demanding technique of CBG-we suggest applying the less invasive technique of CD alone.
Asunto(s)
Artroplastia de Reemplazo , Necrosis de la Cabeza Femoral , Humanos , Necrosis de la Cabeza Femoral/diagnóstico por imagen , Necrosis de la Cabeza Femoral/cirugía , Resultado del Tratamiento , Cabeza Femoral/cirugía , Hueso Esponjoso/cirugía , Descompresión Quirúrgica/métodosRESUMEN
PURPOSE: Valgus deformity presents a particular challenge in total knee arthroplasty. This condition regularly leads to contractures of the lateral capsular ligament complex and to overstretching of the medial ligamentous complex. Reconstruction of the knee joint kinematics and anatomy often requires lateral release. However, data on how such release weakens the stability of the knee are missing in the literature. This study investigated the effects of sequential lateral release on the collateral stability of the ligament complex of the knee in vitro. METHODS: Ten knee prostheses were implanted in 10 healthy cadaveric knee joints using a navigation device. Soft tissue lateral release consisted of five release steps, and stiffness and stability were determined at 0, 30, 60 and 90° flexion after each step. RESULTS: Soft tissue lateral release increasingly weakened the ligament complex of the lateral compartment. Because of the large muscular parts, the release of the iliotibial band and the M. popliteus had little effect on the stability of the lateral and medial compartment, but release of the lateral ligament significantly decreased the stability in the lateral compartment over the entire range of motion. Stability in the medial compartment was hardly affected. Conversely, further release of the posterolateral capsule and the posterior cruciate ligament led to the loss of stability in the lateral compartment only in deep flexion, whereas stability decreased significantly in the medial compartment. CONCLUSION: Our study shows for the first time the association between sequential lateral release and stability of the ligamentous complex of the knee. To maintain the stability, knee surgeons should avoid releasing the entire lateral collateral ligament, which would significantly decrease stability in the lateral compartment.
Asunto(s)
Rodilla , Músculo Esquelético , Procedimientos Ortopédicos/métodos , Artroplastia de Reemplazo de Rodilla , Humanos , Inestabilidad de la Articulación/fisiopatología , Rodilla/fisiología , Rodilla/cirugía , Prótesis de la Rodilla , Músculo Esquelético/fisiología , Músculo Esquelético/cirugía , Rango del Movimiento ArticularRESUMEN
The exact reconstruction of the tibial plateau and articular surface is the main operative aim in the treatment of tibial plateau depression fractures. For selected cases, a novel technique with the use of balloon tibioplasty in combination of bioabsorbable calcium phosphate cement is available. In this study, the first objective was to answer the question whether the clinical outcome parameters after balloon tibioplasty are comparable to open reduction procedures described in the literature. Secondly, we asked whether the cement absorption is safe in relation to adverse effects like osteolysis and measured the absorption ability during the bone conversion process in the proximal tibia bone. Eight patients (mean age 54 years; 4 males and 4 females) received the abovementioned surgical procedure. Mean follow-up period was 27 months. This study evaluated clinical outcome and radiological measured cement absorption within the postoperative course. Cement absorption was measured on X-rays and calculated based on the greatest extend on anterior-posterior and lateral view radiographs just after the operation on the latest available follow-up. WOMAC score showed a mean of 93. Radiologic absorption was 1/5 at a mean of 18 months. No osteolysis reaction was seen surrounding the cement. This far, promising clinical and radiological results have been shown with WOMAC scores comparable to the results of noninjured knees. The indication for this relatively new technique is restricted to isolated depression fractures. It is a useful tool to facilitate the reduction of select depressed tibial fractures. The radiologic absorption effect seems to be quite fast in bone remodeling and safe without any osteolysis or osseous reaction.
Asunto(s)
Cementos para Huesos/uso terapéutico , Fosfatos de Calcio/uso terapéutico , Fijación Interna de Fracturas/métodos , Fracturas de la Tibia/diagnóstico por imagen , Fracturas de la Tibia/cirugía , Implantes Absorbibles , Adulto , Femenino , Humanos , Masculino , Persona de Mediana Edad , Radiografía , Estudios Retrospectivos , Resultado del TratamientoRESUMEN
Background: Studies with extracellular vesicles (EVs), including exosomes, isolated from mesenchymal stem cells (MSC) indicate benefits for the treatment of musculoskeletal pathologies as osteoarthritis (OA) and osteoporosis (OP). However, little is known about intercellular effects of EVs derived from pathologically altered cells that might influence the outcome by counteracting effects from "healthy" MSC derived EVs. We hypothesize, that EVs isolated from osteoblasts of patients with hip OA (coxarthrosis/CA), osteoporosis (OP), or a combination of both (CA/OP) might negatively affect metabolism and osteogenic differentiation of bone-marrow derived (B)MSCs. Methods: Osteoblasts, isolated from bone explants of CA, OP, and CA/OP patients, were compared regarding growth, viability, and osteogenic differentiation capacity. Structural features of bone explants were analyzed via µCT. EVs were isolated from supernatant of naïve BMSCs and CA, OP, and CA/OP osteoblasts (osteogenic culture for 35 days). BMSC cultures were stimulated with EVs and subsequently, cell metabolism, osteogenic marker gene expression, and osteogenic differentiation were analyzed. Results: Trabecular bone structure was different between the three groups with lowest number and highest separation in the CA/OP group. Viability and Alizarin red staining increased over culture time in CA/OP osteoblasts whereas growth of osteoblasts was comparable. Alizarin red staining was by trend higher in CA compared to OP osteoblasts after 35 days and ALP activity was higher after 28 and 35 days. Stimulation of BMSC cultures with CA, OP, and CA/OP EVs did not affect proliferation but increased caspase 3/7-activity compared to unstimulated BMSCs. BMSC viability was reduced after stimulation with CA and CA/OP EVs compared to unstimulated BMSCs or stimulation with OP EVs. ALP gene expression and activity were reduced in BMSCs after stimulation with CA, OP, and CA/OP EVs. Stimulation of BMSCs with CA EVs reduced Alizarin Red staining by trend. Conclusion: Stimulation of BMSCs with EVs isolated from CA, OP, and CA/OP osteoblasts had mostly catabolic effects on cell metabolism and osteogenic differentiation irrespective of donor pathology and reflect the impact of tissue microenvironment on cell metabolism. These catabolic effects are important for understanding differences in effects of EVs on target tissues/cells when harnessing them as therapeutic drugs.
RESUMEN
PURPOSE: The purpose of this study was to investigate the effects of sequential medial release on the stiffness and collateral stability of the ligament complex of the knee. Irrespective of the implantation technique used, varus deformity frequently requires release of the capsular ligament complex. Yet, no data are available on how stiffness and stability of the knee ligament complex are weakened by such release. METHODS: After total knee arthroplasty, ten healthy Thiel-fixed knee joints were subjected to sequential medial release consisting of six release steps. After each step, stiffness and stability were determined at 0°, 30°, 60°, and 90°. RESULTS: Sequential medial release increasingly weakened the ligament complex. In extension, release of the anteromedial tibial sleeve 4 cm below the joint line already weakened the ligament complex by approximately 13%. Release 6 cm below the joint line reduced stiffness and stability by 15-20% over the entire range of motion. After detachment of the medial collateral ligament, stability was only about 60% of its initial value. CONCLUSION: Our study showed for the first time the association between medial release and stiffness and stability of the knee ligament complex. To maintain stability, vigorous detachment of the knee ligament complex should be avoided. Release of the anteromedial tibial sleeve already initiates loss of stability. The main stabiliser is the medial ligament, which should never be completely detached. LEVEL OF EVIDENCE: IV.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Articulación de la Rodilla , Ligamentos Articulares/fisiopatología , Osteoartritis de la Rodilla/cirugía , Complicaciones Posoperatorias , Artroplastia de Reemplazo de Rodilla/efectos adversos , Artroplastia de Reemplazo de Rodilla/métodos , Cadáver , Humanos , Articulación de la Rodilla/fisiopatología , Articulación de la Rodilla/cirugía , Ligamento Colateral Medial de la Rodilla/cirugía , Modelos Anatómicos , Complicaciones Posoperatorias/diagnóstico , Complicaciones Posoperatorias/etiología , Complicaciones Posoperatorias/fisiopatología , Complicaciones Posoperatorias/prevención & control , Rango del Movimiento ArticularRESUMEN
Choosing the appropriate patient for surgery is crucial for good outcome in total hip arthroplasty (THA). Therefore, parameters predicting outcome preoperatively are of major interest. In the current study, we compared the predictive power of different presurgical measures in minimally invasive THA. In the course of a prospective clinical trial preoperative HOOS, EQ-5D and SF-36 were obtained in 140 patients undergoing THA. Responder rate was defined by the modified OMERACT-OARSI criteria at six-month-, one-year, two-year, and three-year follow-up. Logistic regression was performed to compare the different questionnaires regarding their power of predicting positive responders. ROC-curve analysis was used to define benchmarks in preoperative measures associated with good outcome. Preoperative HOOS (p<0.001), EQ-5D (p=0.007), and PCS of SF-36 (p<0.001) were higher in responders than in nonresponders whereas no differences between responders and nonresponders were found for preoperative MCS (p=0.96) of SF-36. However, preoperative HOOS revealed best predictive power (OR=0.84 95%CI=0.78-0.90, p<0.001, Pseudo R-Squared according to Nagelkerke=0.48, effect size according to Cohen=0.96) compared to all other preoperative measures. Multivariable analysis confirmed preoperative HOOS as an independent parameter correlating with postoperative responder status (OR=0.76, 95% CI=0.66-0.88, p<0.001). In ROC-curve analysis nonresponders were identified with a sensitivity of 91.7% and specificity of 68.9% using a cutoff in preoperative HOOS of 40.3. Presurgical HOOS can predict outcome in THA better than other preoperative outcome measures. Patients with a preoperative HOOS value less than 40.3 have the highest probability of a positive response in terms of pain and function after THA.
Asunto(s)
Artroplastia de Reemplazo de Cadera/métodos , Cadera/cirugía , Procedimientos Quirúrgicos Mínimamente Invasivos/métodos , Pronóstico , Adulto , Anciano , Anciano de 80 o más Años , Femenino , Cadera/fisiopatología , Humanos , Masculino , Persona de Mediana Edad , Dimensión del Dolor/métodos , Satisfacción del Paciente , Periodo Preoperatorio , Calidad de Vida , Recuperación de la Función/fisiología , Encuestas y Cuestionarios , Resultado del TratamientoRESUMEN
A key requirement in both native knee joints and total knee arthroplasty is a stable capsular ligament complex. However, knee stability is highly individual and ranges from clinically loose to tight. So far, hardly any in vivo data on the intrinsic mechanical of the knee are available. This study investigated if stiffness of the native ligament complex may be determined in vivo using a standard knee balancer. Measurements were obtained with a commercially available knee balancer, which was initially calibrated in vitro. 5 patients underwent reconstruction of the force-displacement curves of the ligament complex. Stiffness of the medial and lateral compartments were calculated to measure the stability of the capsular ligament complex. All force-displacement curves consisted of a non-linear section at the beginning and of a linear section from about 80 N onwards. The medial compartment showed values of 28.4 ± 1.2 N/mm for minimum stiffness and of 39.9 ± 1.1 N/mm for maximum stiffness; the respective values for the lateral compartment were 19.9 ± 0.9 N/mm and 46.6 ± 0.8 N/mm. A commercially available knee balancer may be calibrated for measuring stiffness of knee ligament complex in vivo, which may contribute to a better understanding of the intrinsic mechanical behaviour of knee joints.
Asunto(s)
Artroplastia de Reemplazo de Rodilla/métodos , Articulación de la Rodilla/cirugía , Osteoartritis de la Rodilla/cirugía , Anciano , Anciano de 80 o más Años , Femenino , Humanos , Ligamentos/fisiopatología , Ligamentos/cirugía , Masculino , Persona de Mediana Edad , Osteoartritis de la Rodilla/fisiopatología , Rango del Movimiento Articular/fisiologíaRESUMEN
PURPOSE: In revision hip arthroplasty, custom-made implants are one option in patients with acetabular Paprosky III defects. METHODS: In a retrospective analysis, we identified 11 patients undergoing cup revision using a custom-made implant. The accuracy of the intended position of the implant was assessed on post-operative 3D CT and compared to the pre-operative 3D planning in terms of inclination, anteversion, and centre of rotation. In addition, the accuracy of post-operative plain radiographs for measuring implant position was evaluated in relation to the 3D CT standard. RESULTS: We found a mean deviation between the planned and the final position of the custom-made acetabular implant on 3D CT of 3.6° ± 2.8° for inclination and of - 1.2° ± 7.0° for anteversion, respectively. Restoration of center of rotation succeeded with an accuracy of 0.3 mm ± 3.9 mm in the mediolateral (x) direction, - 1.1 mm ± 3.8 mm in the anteroposterior (y) direction, and 0.4 mm ± 3.2 mm in the craniocaudal (z) direction. The accuracy of the post-operative plain radiographs in measuring the position of the custom-made implant in relation to 3D CT was 1.1° ± 1.7° for implant inclination, - 2.6° ± 1.3° for anteversion and 1.3 mm ± 3.5 mm in the x-direction, and - 0.9 mm ± 3.8 mm in the z-direction for centre of rotation. CONCLUSION: Custom-made acetabular implants can be positioned with good accuracy in Paprosky III defects according to the pre-operative planning. Plain radiographs are adequate for assessing implant position in routine follow-up.
Asunto(s)
Acetábulo/cirugía , Artroplastia de Reemplazo de Cadera/instrumentación , Artroplastia de Reemplazo de Cadera/métodos , Resorción Ósea/cirugía , Prótesis de Cadera , Acetábulo/diagnóstico por imagen , Acetábulo/patología , Anciano , Anciano de 80 o más Años , Artroplastia de Reemplazo de Cadera/efectos adversos , Desviación Ósea/diagnóstico por imagen , Desviación Ósea/etiología , Desviación Ósea/prevención & control , Resorción Ósea/clasificación , Resorción Ósea/diagnóstico por imagen , Resorción Ósea/etiología , Simulación por Computador , Femenino , Humanos , Imagenología Tridimensional , Masculino , Persona de Mediana Edad , Atención Perioperativa , Diseño de Prótesis/métodos , Reoperación , Estudios Retrospectivos , Cirugía Asistida por Computador , Tomografía Computarizada por Rayos XRESUMEN
BACKGROUND: In total hip arthroplasty, inadequate femoral component positioning can be associated with instability, impingement and component wear and subsequently with patient dissatisfaction. In this study, we investigated the influence of femoral neck resection height on the final three-dimensional position of a collarless straight tapered stem (Corail®). We asked two questions-(1) is neck resection height correlated with version, tilt, and varus/valgus alignment of the femoral component, and (2) dependent on the resection height of the femoral neck, which area of the stem comes into contact with the femoral cortical bone? MATERIALS AND METHODS: Three-dimensional computed tomography scans of 40 patients who underwent minimally invasive, cementless total hip arthroplasty were analyzed retrospectively. We analyzed the relationship between femoral neck resection height and three-dimensional alignment of the femoral implant, as well as the contact points of the implant with the femoral cortical bone. This investigation was approved by the local Ethics Commission (No.10-121-0263) and is a secondary analysis of a larger project (DRKS00000739, German Clinical Trials Register May-02-2011). RESULTS: Mean femoral neck resection height was 10.4 mm (± 4.8) (range 0-20.1 mm). Mean stem version was 8.7° (± 7.4) (range - 2° to 27.9°). Most patients had a varus alignment of the implant. The mean varus/valgus alignment was 1.5° (± 1.8). All 40 patients (100%) had anterior tilt of the implant with a mean tilt of 2.2° (± 1.6). Femoral neck resection height did not correlate with stem version, varus/valgus alignment, or tilt. Independent from femoral neck resection height, in most patients the implant had contact with the ventral and ventromedial cortical bone in the upper third (77.5%) and the middle third (52.5%). In the lower third, the majority of the implants had contact with the lateral and dorsolateral cortical bone (92.5%). CONCLUSION: Femoral neck resection height ranging between 0 and 20.1 mm does not correlate with the final position of a collarless straight tapered stem design (Corail®). LEVEL OF EVIDENCE: Level 3.
Asunto(s)
Artroplastia de Reemplazo de Cadera/métodos , Cuello Femoral/cirugía , Prótesis de Cadera , Imagenología Tridimensional/métodos , Tomografía Computarizada por Rayos X/métodos , Anciano , Cementos para Huesos , Femenino , Cuello Femoral/diagnóstico por imagen , Humanos , Masculino , Persona de Mediana Edad , Estudios Prospectivos , Diseño de PrótesisRESUMEN
Revisions after total joint replacement increase constantly. In the current study, we analyzed clinical outcome, complication rates, and cost-effectiveness of revision arthroplasty. In a retrospective analysis of 162 revision hip and knee arthroplasties from our institutional joint registry responder rate, patient-reported outcome measures (EQ-5D, WOMAC), complication rates, and patient-individual charges in relation to reimbursement were compared with a matched control group of primary total joint replacements. Positive responder rate one year postoperatively was lower for revision arthroplasties with 72.9% than for primary arthroplasties with 90.1% (OR=0.30, 95%CI=0.18-0.59, p=0.001). Correspondingly, improvement in patient-reported outcome measures one year after surgery was lower in revision than in primary joint arthroplasty with EQ-5D 0.19±0.25 to 0.30±0.24 (p<0.001) and WOMAC 24.3±30.3 to 41.2±21.3 (p<0.001). Infection rate was higher in revision (6.8%) compared to primary replacements (0%, p=0.001). Mean charges in revision arthroplasty were 76.0% higher than in matched primary joint replacements (7110.8±2249.4$ to 4041.1±975.7$, p<0.001), whereas reimbursement was only 23.6% higher (9243.3±2258.4$ in revision and 7477.9±703.1$ in primary arthroplasty, p<0.001). Revision arthroplasty is associated with lower outcome and higher infection rate compared to primary replacements. The high financial expense of revision arthroplasty is only partly covered by a higher reimbursement.
Asunto(s)
Artroplastia de Reemplazo de Cadera/economía , Artroplastia de Reemplazo de Rodilla/economía , Anciano , Anciano de 80 o más Años , Artroplastia de Reemplazo de Cadera/métodos , Artroplastia de Reemplazo de Rodilla/métodos , Costos y Análisis de Costo , Femenino , Humanos , Masculino , Persona de Mediana EdadRESUMEN
Equalization of biomechanical differences is a major goal in total hip arthroplasty (THA). In the current study we compared the accuracy of restoring leg length and offset using imageless navigation with an osseous fixed pin to a femoral pinless device in 97 minimally invasive THAs through an anterolateral approach in the lateral decubitus position. Leg length and offset differences were evaluated on magnification-corrected radiographs by a blinded observer. A postoperative mean difference of -0.9 mm (95% CI -2.8 mm to 1.1 mm, p = 0.38) between pinless navigation and navigation with a fixed pin was observed for leg length and that of -2.4 mm (95% CI -3.9 mm to -0.9 mm, p = 0.002) was observed for offset, respectively. The number of patients with a residual difference below 5 mm after THA was higher if using a fixed pin than in pinless navigation for both leg length (98.2%, 54/55 to 50.0%, 21/42, p < 0.001) and offset (100.0%, 55/55 to 71.4%, 30/42, p < 0.001). Imageless navigation is a feasible method in intraoperative control of leg length and offset in minimally invasive THA. The use of pins fixed to the bone has a higher precision than pinless devices. This trial is registered with DRKS00000739.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Fémur/anatomía & histología , Anciano , Femenino , Prótesis de Cadera , Humanos , Masculino , Persona de Mediana Edad , Estudios Prospectivos , Reproducibilidad de los Resultados , Cirugía Asistida por ComputadorRESUMEN
BACKGROUND: Total hip and knee replacements are frequently performed curative treatment options in end-stage arthritis. In this study, we analyzed clinical outcome, complications, and predictors of outcome in modern joint replacement. METHODS: In a retrospective analysis of over 2000 primary total hip and knee replacements from our institutional joint registry, responder rates for positive outcome as defined by the OMERACT-OARSI criteria, postoperative complication rates, and patient-reported outcome measures (EQ-5D, WOMAC) within the first year were compared between hip and knee replacements. Furthermore, preoperative risk factors associated with nonresponder rate were evaluated. RESULTS: Positive responder rate was higher for hip replacements with 92.8% (1145/1234) than for knee replacements with 86.1% (839/975, P < .001). Infection rates were lower (P = .04), whereas intraoperative fracture occurred more frequently (P = .001) in hip than in knee replacements. Patient-reported outcome measures 1 year after surgery were higher in hip than in knee replacements with EQ-5D (0.88 ± 0.17 to 0.81 ± 0.19, P < .001) and WOMAC (84.58 ± 16.73 to 74.31 ± 18.94, P < .001). Besides the type of joint replacement (hazard ratio [HR] 2.0, P < .001), high preoperative outcome measures (HR 7.4, P < .001) and male gender (HR 1.4, P = .05) were independent risk factors of nonresponders after joint replacement. CONCLUSION: Both total hip and knee replacements are safe procedures with low complication rates. Still, postoperative outcome is higher in hip than in knee arthroplasty. High preoperative clinical scores are a risk factor for poor clinical improvement following total joint replacement and can be used in counseling patients in the office.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Artroplastia de Reemplazo de Rodilla , Complicaciones Posoperatorias/etiología , Anciano , Artroplastia de Reemplazo de Cadera/efectos adversos , Artroplastia de Reemplazo de Rodilla/efectos adversos , Femenino , Humanos , Masculino , Persona de Mediana Edad , Evaluación de Resultado en la Atención de Salud , Medición de Resultados Informados por el Paciente , Seguridad del Paciente , Probabilidad , Modelos de Riesgos Proporcionales , Sistema de Registros , Estudios Retrospectivos , Factores de Riesgo , Factores Sexuales , Resultado del TratamientoRESUMEN
Purpose Accurate assessment of cup orientation on postoperative pelvic radiographs is essential for evaluating outcome after THA. Here, we present a novel method for correcting measurement inaccuracies due to pelvic tilt and rotation. Method In an experimental setting, a cup was implanted into a dummy pelvis, and its final position was verified via CT. To show the effect of pelvic tilt and rotation on cup position, the dummy was fixed to a rack to achieve a tilt between +â15° anterior and -15° posterior and 0° to 20° rotation to the contralateral side. According to Murray's definitions of anteversion and inclination, we created a novel corrective procedure to measure cup position in the pelvic reference frame (anterior pelvic plane) to compensate measurement errors due to pelvic tilt and rotation. Results The cup anteversion measured on CT was 23.3°; on AP pelvic radiographs, however, variations in pelvic tilt (±â15°) resulted in anteversion angles between 11.0° and 36.2° (mean error 8.3°±â3.9°). The cup inclination was 34.1° on CT and ranged between 31.0° and 38.7° (m.âe. 2.3°±â1.5°) on radiographs. Pelvic rotation between 0° and 20° showed high variation in radiographic anteversion (21.2°-31.2°, m.âe. 6.0°±â3.1°) and inclination (34.1°-27.2°, m.âe. 3.4°±â2.5°). Our novel correction algorithm for pelvic tilt reduced the mean error in anteversion measurements to 0.6°±â0.2° and in inclination measurements to 0.7° (SD±â0.2). Similarly, the mean error due to pelvic rotation was reduced to 0.4°±â0.4° for anteversion and to 1.3°±â0.8 for inclination. Conclusion Pelvic tilt and pelvic rotation may lead to misinterpretation of cup position on anteroposterior pelvic radiographs. Mathematical correction concepts have the potential to significantly reduce these errors, and could be implemented in future radiological software tools. Key Points · Pelvic tilt and rotation influence cup orientation after THA. · Cup anteversion and inclination should be referenced to the pelvis. · Radiological measurement errors of cup position may be reduced by mathematical concepts. Citation Format · Schwarz TJ, Weber M, Dornia C etâal. Correction of Pelvic Tilt and Pelvic Rotation in Cup Measurement after THA - An Experimental Study. Fortschr Röntgenstr 2017; 189: 864â-â873.
Asunto(s)
Acetábulo/diagnóstico por imagen , Puntos Anatómicos de Referencia/diagnóstico por imagen , Artroplastia de Reemplazo de Cadera/métodos , Prótesis de Cadera , Huesos Pélvicos/diagnóstico por imagen , Acetábulo/cirugía , Artroplastia de Reemplazo de Cadera/instrumentación , Artroplastia de Reemplazo de Cadera/normas , Humanos , Fantasmas de Imagen , Ajuste de Prótesis , Interpretación de Imagen Radiográfica Asistida por Computador , Reproducibilidad de los Resultados , Rotación , Sensibilidad y Especificidad , Tomografía Computarizada por Rayos X/instrumentación , Resultado del TratamientoRESUMEN
BACKGROUND: Assessing femoral version in orthopedic surgery is important for preoperative planning of total hip arthroplasty, especially for recognizing excessive anteversion or retroversion. The present study addressed the following: (1) Is the position of the lesser trochanter correlated to the femoral neck axis? (2) If so, may femoral version be assessed by means of plain pelvic radiographs? METHODS: Three-dimensional computed tomography scans of 60 patients undergoing minimally invasive cement-free total hip arthroplasty were retrospectively analyzed, particularly with regard to the relation between the femoral neck axis and the lesser trochanter, the femoral version, and the size of the projected lesser trochanter in different rotational positions. Based on linear regression, a biomathematical formula was developed to assess femoral anteversion on plain radiographs depending on the visible part of the lesser trochanter. RESULTS: The mean difference between the location of the lesser trochanter axis and the femoral neck axis was 43.3° ± 6.2°. Eighty-seven percent of patients (52 of 60) had a deviation of <10° from the mean value of 43.3°. By virtual rotation of the femur in steps of 10°, the visible part of the lesser trochanter linearly increased with anteversion of the femur: femoral version = (lesser trochanter size - 5.57) × 4.17. There was a high correlation between the visible part of the lesser trochanter and femoral version (R2 = 0.75; P < .001). The lesser trochanter was no longer visible with femoral retroversion in each of the 60 data sets. CONCLUSION: The projected size of the lesser trochanter as available on plain pelvic AP radiographs correlates with native femoral anteversion.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Cuello Femoral/cirugía , Fémur/cirugía , Anciano , Cementos para Huesos , Femenino , Humanos , Modelos Lineales , Masculino , Persona de Mediana Edad , Ortopedia , Osteoartritis/cirugía , Pelvis/cirugía , Estudios Prospectivos , Radiografía , Estudios Retrospectivos , Rotación , Tomografía Computarizada por Rayos XRESUMEN
BACKGROUND: The first biomechanical evaluation of new implants is usually carried out with cadavers. Fixation of Thiel-embalmed cadavers is supposed to preserve the histological structure, colour and consistency of the tissue and has a low risk of infection and toxicity. However, the biomechanical properties of Thiel-fixated tissue are still unknown. The aim of this study was to quantify the effect of the Thiel-embalming method on the elastic properties of the ligament complex of the knee compared to in vivo knees during total knee arthroplasty. METHODS: The results of biomechanical tensile tests with 10 Thiel-embalmed knees were compared with the findings of 10 patients who underwent total knee arthroplasty with a standardised knee balancer at our department. We reconstructed the force-elongation curves of the medial and lateral ligament complex and calculated the stiffness in direct correlation with overall soft tissue stability in full extension and in 90° of flexion. RESULTS: All curves consisted of a non-linear part at the beginning and a linear part from about 80N onwards. In full extension, median stiffness in the cadavers was 26.6N/mm for the medial compartment and 31.6N/mm for the lateral compartment. The values for in vivo were 25.7N/mm for the medial compartment and 25.3N/mm for the lateral compartment (p=0.684 for the medial compartment and p=0.247 for the lateral compartment). In 90° of flexion, median stiffness in the cadaver group was 24.7N/mm for the medial compartment and 22.2N/mm for the lateral compartment. In vivo, median stiffness was 30.3N/mm for the medial compartment and 29.2N/mm for the lateral compartment (p=0.009 for the medial compartment and p=0.143 for the lateral compartment). CONCLUSION: Stiffness of the medial and lateral ligament complex in the knee was comparable between Thiel-embalmed cadavers and in vivo patients during total knee arthroplasty. Thiel fixation seems to preserve the soft tissue properties similar to those in vivo.
Asunto(s)
Embalsamiento , Articulación de la Rodilla/fisiología , Ligamentos/fisiología , Rango del Movimiento Articular , Anciano , Anciano de 80 o más Años , Artroplastia de Reemplazo de Rodilla , Fenómenos Biomecánicos , Cadáver , Femenino , Humanos , Masculino , Persona de Mediana EdadRESUMEN
Background The estimation of femoral version in preoperative planning of total hip arthroplasty and to assess complications after total hip arthroplasty is crucial. Recent studies have recommended the posterior lesser trochanter line as an intraoperative reference for estimating femoral version. We hypothesized, that if there is a correlation, the posterior lesser trochanter line could be used to assess femoral version in computed tomography (CT) scans. Purpose To evaluate the correlation between the posterior lesser trochanter line and the posterior femoral condyle axis. Material and Methods CT scans of 126 patients after unilateral total hip arthroplasty were analyzed by means of a newly developed digital planning software for CT scans. Both hips were measured, the angle between the posterior lesser trochanter line and the posterior femoral condyle axis was determined, and the relationship between both lines was evaluated. Results We found significant differences between male and female patients ( P < 0.001) and between left and right femora ( P = 0.001). There was no significant difference between healthy hips and hips with osteoarthritis after total hip arthroplasty ( P = 0.901). Conclusion There is no reliable correlation between posterior lesser trochanter line and posterior femoral condyle axis. Therefore, posterior lesser trochanter line should not be used to assess femoral version in CT scans. As a consequence, the gold standard for measuring femoral version should still be a three-dimensional CT scan of the whole femur.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Fémur/diagnóstico por imagen , Cirugía Asistida por Computador , Tomografía Computarizada por Rayos X , Anciano , Puntos Anatómicos de Referencia , Femenino , Humanos , Masculino , Osteoartritis de la Cadera/diagnóstico por imagen , Osteoartritis de la Cadera/cirugía , Reproducibilidad de los Resultados , Estudios Retrospectivos , Factores Sexuales , Programas InformáticosRESUMEN
PURPOSE: Various methods are available for measuring acetabular cup position after total hip arthroplasty (THA) on standard anterior-posterior (AP) radiographs. We compared the accuracy of a commercial radiographic planning software program with that of three-dimensional computed tomography (3D-CT) scans. METHODS: We obtained plain AP radiographs and 3D-CTs from 65 patients after THA. In addition to calculating cup anteversion and inclination with 3D-CT, we determined the cup position using the radiographic planning software program mediCAD® 2.5 (Hectec, Niederviehbach, Germany). Furthermore, we compared the measurements using the inter-teardrop and bi-ischial lines as pelvic landmarks. RESULTS: The mean difference in anteversion between 3D-CT and mediCAD® software was 0.1° using the inter-teardrop line (standard deviation [SD], 8.8°; range, -21° to 23°; p = 0.97) and 0.4° using the bi-ischial line (SD, 8.8°; range, -23° to 21°; p = 0.72). Inclination showed a mean difference of 0.6° using the inter-teardrop line (SD, 4.4°; range, -9° to 21°; p = 0.24) and 0.5° using bi-ischial line (SD, 4.6°; range, -9° to 22°; p = 0.35). The means for absolute differences were 7.2° for anteversion and 3.1° for inclination. With regard to using the bi-ischial or inter-teardrop line, no significant difference was found between the two pelvic landmarks. The intra-class correlation coefficient (ICC) was analysed for anteversion and inclination using either the inter-teardrop line or the bi-ischial line as radiographic baseline. CONCLUSIONS: A radiographic planning software program (mediCAD®) is a helpful tool for measuring cup inclination on AP radiographs. With respect to anteversion, measurements are rather susceptible to mistakes with mean inaccuracies of over 7°. Thus, 3D-CT remains the "gold standard" if a lower tolerance limit (±3°) is required for more complex biomechanical evaluations. As a pelvic landmark, the interteardrop line is preferential to the bi-ischial line because of its lower impact on the position of the pelvis.