Assessing Mixing Quality of a Copovidone-TPGS Hot Melt Extrusion Process with Atomic Force Microscopy and Differential Scanning Calorimetry.

Atomic force microscopy (AFM) and modulated differential scanning calorimetry (mDSC) were used to evaluate the extent of mixing of a hot melt extrusion process for producing solid dispersions of copovidone and D-α-tocopherol polyethylene glycol 1000 succinate (TPGS 1000). In addition to composition, extrusion process parameters of screw speed and thermal quench rate were varied. The data indicated that for 10% TPGS and 300 rpm screw speed, the mixing was insufficient to yield a single-phase amorphous material. AFM images of the extrudate cross section for air-cooled material indicate round domains 200 to 700 nm in diameter without any observed alignment resulting from the extrusion whereas domains in extrudate subjected to chilled rolls were elliptical in shape with uniform orientation. Thermal analysis indicated that the domains were predominantly semi-crystalline TPGS. For 10% TPGS and 600 rpm screw speed, AFM and mDSC data were consistent with that of a single-phase amorphous material for both thermal quench rates examined. When the TPGS concentration was reduced to 5%, a single-phase amorphous material was achieved for all conditions even the slowest screw speed studied (150 rpm).

Physicochemical and formulation developability assessment for therapeutic peptide delivery--a primer.

Peptides are an important class of endogenous ligands that regulate key biological cascades. As such, peptides represent a promising therapeutic class with the potential to alleviate many severe disease states. Despite their therapeutic potential, peptides frequently pose drug delivery challenges to scientists. This review introduces the physicochemical, biophysical, biopharmaceutical, and formulation developability aspects of peptides pertinent to the drug discovery-to-development interface. It introduces the relevance of these properties with respect to the delivery modalities available for peptide pharmaceuticals, with the parenteral route being the most prevalent route of administration. This review also presents characterization strategies for oral delivery of peptides with the aim of illuminating developability issues with the drug candidate. A brief overview of other routes of administration, including inhaled, transdermal, and intranasal routes, is provided as these routes are generally preferred by patients over injectables. Finally, this review presents formulation techniques to mitigate some of the developability obstacles associated with peptide delivery. The authors emphasize opportunities for the thoughtful application of pharmaceutical science to the development of peptide drugs and to the general advancement of this promising class of pharmaceuticals.

An in vivo evaluation of amphiphilic, biodegradable peptide copolymers as siRNA delivery agents.

A series of amphiphilic, biodegradable polypeptide copolymers were prepared for the delivery of siRNA (short interfering ribonucleic acid). The molecular weight (or polymer chain length) of the linear polymer was controlled by reaction stoichiometry for the 11.5, 17.2, and 24.6 kDa polypeptides, and the highest molecular weight polypeptide was prepared using a sequential addition method to obtain a polypeptide having a molecular weight of 38.6 kDa. These polymers were used to prepare polymer conjugate systems designed to target and deliver an apolipoprotein B (ApoB) siRNA to hepatocyte cells and to help delineate the effect of polymer molecular weight or polymer chain length on siRNA delivery in vivo. A clear trend in increasing potency was found with increasing molecular weight of the polymers examined (at a constant polymer:siRNA (w/w) ratio), with minimal toxicity found. Furthermore, the biodegradability of these polymer conjugates was examined and demonstrates the potential of these systems as siRNA delivery vectors.

Development of a liver-targeted siRNA delivery platform with a broad therapeutic window utilizing biodegradable polypeptide-based polymer conjugates.

The greatest challenge standing in the way of effective in vivo siRNA delivery is creating a delivery vehicle that mediates a high degree of efficacy with a broad therapeutic window. Key structure-activity relationships of a poly(amide) polymer conjugate siRNA delivery platform were explored to discover the optimized polymer parameters that yield the highest activity of mRNA knockdown in the liver. At the same time, the poly(amide) backbone of the polymers allowed for the metabolism and clearance of the polymer from the body very quickly, which was established using radiolabeled polymers to demonstrate the time course of biodistribution and excretion from the body. The fast degradation and clearance of the polymers provided for very low toxicity at efficacious doses, and the therapeutic window of this poly(amide)-based siRNA delivery platform was shown to be much broader than a comparable polymer platform. The results of this work illustrate that the poly(amide) platform has a promising future in the development of a siRNA-based drug approved for human use.

Endosomolytic bioreducible poly(amido amine disulfide) polymer conjugates for the in vivo systemic delivery of siRNA therapeutics.

Efficient siRNA delivery is dependent not only on the ability of the delivery vehicle to target a specific organ but also on its ability to enable siRNA entry into the cytoplasm of the target cells. Polymers with endosomolytic properties are increasingly being used as siRNA delivery vehicles due to their potential to facilitate endosomal escape and intracellular delivery. Addition of disulfide bonds in the backbone of these polymers was expected to provide degradability through reduction by glutathione in cytosol. This paper describes the synthesis of new endosomolytic bioreducible poly(amido amine disulfide) polymers whose lytic potential can be masked at physiological pH, but can be restored at acidic endosomal pH. These polymer conjugates gave good in vitro knockdown (KD) and did not demonstrate cytotoxicity in a MTS assay. Efficient mRNA KD for apolipoprotein B in mouse liver was observed with these polyconjugates following intravenous dosing.

Interaction of cholesterol-conjugated ionizable amino lipids with biomembranes: lipid polymorphism, structure-activity relationship, and implications for siRNA delivery.

Delivery of siRNA is a major obstacle to the advancement of RNAi as a novel therapeutic modality. Lipid nanoparticles (LNP) consisting of ionizable amino lipids are being developed as an important delivery platform for siRNAs, and significant efforts are being made to understand the structure-activity relationship (SAR) of the lipids. This article uses a combination of small-angle X-ray scattering (SAXS) and differential scanning calorimetry (DSC) to evaluate the interaction between cholesterol-conjugated ionizable amino lipids and biomembranes, focusing on an important area of lipid SAR--the ability of lipids to destabilize membrane bilayer structures and facilitate endosomal escape. In this study, cholesterol-conjugated amino lipids were found to be effective in increasing the order of biomembranes and also highly effective in inducing phase changes in biological membranes in vitro (i.e., the lamellar to inverted hexagonal phase transition). The phase transition temperatures, determined using SAXS and DSC, serve as an indicator for ranking the potency of lipids to destabilize endosomal membranes. It was found that the bilayer disruption ability of amino lipids depends strongly on the amino lipid concentration in membranes. Amino lipids with systematic variations in headgroups, the extent of ionization, tail length, the degree of unsaturation, and tail asymmetry were evaluated for their bilayer disruption ability to establish SAR. Overall, it was found that the impact of these lipid structure changes on their bilayer disruption ability agrees well with the results from a conceptual molecular "shape" analysis. Implications of the findings from this study for siRNA delivery are discussed. The methods reported here can be used to support the SAR screening of cationic lipids for siRNA delivery, and the information revealed through the study of the interaction between cationic lipids and biomembranes will contribute significantly to the design of more efficient siRNA delivery vehicles.

Ionization behavior of amino lipids for siRNA delivery: determination of ionization constants, SAR, and the impact of lipid pKa on cationic lipid-biomembrane interactions.

Ionizable amino lipids are being pursued as an important class of materials for delivering small interfering RNA (siRNA) therapeutics, and research is being conducted to elucidate the structure-activity relationships (SAR) of these lipids. The pK(a) of cationic lipid headgroups is one of the critical physiochemical properties of interest due to the strong impact of lipid ionization on the assembly and performance of these lipids. This research focused on developing approaches that permit the rapid determination of the relevant pK(a) of the ionizable amino lipids. Two distinct approaches were investigated: (1) potentiometric titration of amino lipids dissolved in neutral surfactant micelles; and (2) pH-dependent partitioning of a fluorescent dye to cationic liposomes formulated from amino lipids. Using the approaches developed here, the pK(a) values of cationic lipids with distinct headgroups were measured and found to be significantly lower than calculated values. It was also found that lipid-lipid interaction has a strong impact on the pK(a) values of lipids. Lysis of model biomembranes by cationic lipids was used to evaluate the impact of lipid pK(a) on the interaction between cationic lipids and cell membranes. It was found that cationic lipid-biomembrane interaction depends strongly on lipid pK(a) and solution pH, and this interaction is much stronger when amino lipids are highly charged. The presence of an optimal pK(a) range of ionizable amino lipids for siRNA delivery was suggested based on these results. The pK(a) methods reported here can be used to support the SAR screen of cationic lipids for siRNA delivery, and the information revealed through studying the impact of pK(a) on the interaction between cationic lipids and cell membranes will contribute significantly to the design of more efficient siRNA delivery vehicles.

Effective siRNA delivery and target mRNA degradation using an amphipathic peptide to facilitate pH-dependent endosomal escape.

Effective delivery of siRNA (small interfering RNA) into the cells requires the translocation of siRNA into the cytosol. One potential delivery strategy uses cell-delivery peptides that facilitate this step. In the present paper, we describe the characterization of an amphipathic peptide that mediates the uptake of non-covalently bound siRNA into cells and its subsequent release into the cytosol. Biophysical characterization of peptide and peptide/siRNA mixtures at neutral and lysosomal (acidic) pH suggested the formation of α-helical structure only in endosomes and lysosomes. Surprisingly, even though the peptide enhanced the uptake of siRNA into cells, no direct interaction between siRNA and peptide was observed at neutral pH by isothermal titration calorimetry. Importantly, we show that peptide-mediated siRNA uptake occurred through endocytosis and, by applying novel endosomal-escape assays and cell-fractionation techniques, we demonstrated a pH-dependent alteration in endosome and lysosome integrity and subsequent release of siRNA and other cargo into the cytosol. These results indicate a peptide-mediated siRNA delivery through a pH-dependent and conformation-specific interaction with cellular membranes and not with the cargo.