Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Más filtros




Base de datos
Intervalo de año de publicación
1.
J Mech Behav Biomed Mater ; 142: 105812, 2023 06.
Artículo en Inglés | MEDLINE | ID: mdl-37084491

RESUMEN

This study set out to develop a thermally compatible glass to be infiltrated into zirconia partially stabilized by yttrium oxide (5Y-PSZ), to characterize it, and to evaluate its structural reliability and mechanical behavior. 5Y-PSZ zirconia discs (N = 90), dimensions 1.5 mm × 15 mm were produced, polished with #600 alumina oxide and #1200 silicon carbide sandpaper in a polisher. Three groups of 5Y-PSZ discs were assigned (n = 30): Zctrl: as sintered zirconia, Zinf-comp: glass-infiltrated zirconia on the occlusal surface, and sintered, and Zinf-tens: glass-infiltrated zirconia on the cementing surface and sintered; for biaxial flexural strength testing (ISO 6872:2015). A gel was synthesized via the sol-gel method and applied to the ceramic surface. Mechanical assay data (MPa) were evaluated via Weibull analysis (α = 5%) and specimens via X-Ray Diffractometry (XRD), Scanning Electron Microscopy (SEM), and fractographic analysis. The Zinf-tens group showed a characteristic strength of 824 MPa and m = 9.9; Zinf-comp 613 MPa and m = 10.2; Zctrl 534 MPa and m = 8; all groups differed statistically (σ0). However, they were similar in structural homogeneity (m). XRD showed 20-50 µm of infiltration, which means dissolution of part of the yttrium and reduction in the size of the cubic grains. In addition, the Zinf-tens group presented a failure origin from inside the material. The developed glass infiltrated into zirconia partially stabilized by yttrium oxide, increasing its characteristic strength and structural homogeneity by reducing surface defects and changing the failure mode.


Asunto(s)
Resistencia Flexional , Circonio , Ensayo de Materiales , Reproducibilidad de los Resultados , Circonio/química , Itrio/química , Cerámica/química , Propiedades de Superficie , Materiales Dentales
2.
Hum Exp Toxicol ; 40(8): 1374-1382, 2021 Aug.
Artículo en Inglés | MEDLINE | ID: mdl-33541126

RESUMEN

Tobacco use may initiate the process of oral carcinogenesis with clinically undetectable changes. Smoking cessation may prevent its progression. The objective of this study was to evaluate the association between DNA ploidy and micronucleus (MN) frequency in chronic smokers. Three groups were evaluated: Smoker Group, Former Smoker Group and Control Group. Exfoliative cytology was performed on the lateral border of the tongue and mouth floor. MN and DNA ploidy analyses were performed, as well as the correlation between the variables. The data showed a difference between the groups for the total MN (p = 0.0227), and the Smoker group had the highest mean (4.22 ± 4.12). The three groups did not differ statistically from each other on ploidy evaluation (p-value > 0.05). There was also an association between aneuploidy and increased MN frequency in the Former Smoker group (p = 0.0036). In conclusion, these results point out that there is a relationship between the frequency of MN and aneuploidy in former smokers. Moreover, smoking cessation, even for a short period of time, may promote the decrease of MN frequency caused by tobacco use.


Asunto(s)
Aneuploidia , Micronúcleos con Defecto Cromosómico , Cese del Hábito de Fumar , Fumar/genética , ADN , Femenino , Humanos , Masculino , Pruebas de Micronúcleos , Fumadores
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA