GC-MS determination of malondialdehyde, acrolein, and 4-hydroxy-2-nonenal by ultrasound-assisted dispersive liquid-liquid microextraction in beverages.

A new, fast, simple, and effective ultrasound-assisted dispersive liquid-liquid microextraction procedure (UA-DLLME) for the gas chromatography-mass spectrometry (GC-MS) determination of malondialdehyde, acrolein, and 4-hydroxy-2-nonenal in beverages was successfully developed. 2,4-Dinitrophenylhydrazine derivatization was performed during extraction. An asymmetrical 3541//18 screening design and a central composite surface response design were used to investigate the influence of the most critical factors during the extraction process (ultrasound time and temperature, extraction and disperser solvents volumes, salt addition, and derivatization reagent concentration). According to FDA guidelines, the method was validated, achieving good linearities with r2 ≥ 0.9982, recoveries between 94.0 and 102.4%, and reproducibility with RSD lower than 4.5%. The method was applied to simultaneously determine the compounds in 60 different beverage samples, including beer, coffee, black tea, and fruit juices. The presence of secondary lipid oxidation products is demonstrated in beverages with a strong roasting process or oxidation.

Determination of malondialdehyde, acrolein and four other products of lipid peroxidation in edible oils by Gas-Diffusion Microextraction combined with Dispersive Liquid-Liquid Microextraction.

A new and sensitive analytical method for the simultaneous determination of secondary lipid peroxidation aldehydes has been successfully developed and validated. Malondialdehyde, acrolein, formaldehyde, acetaldehyde, propanal, and pentanal were extracted and derivatized using 2,4-dinitrophenylhydrazine (DNPH) by gas-diffusion microextraction (GDME) combined with dispersive liquid-liquid microextraction (DLLME) for gas chromatography-mass spectrometry (GC-MS) analysis. The experimental conditions have been optimized by experimental designs. The analytical method validation, in accordance to the Food and Drug Administration (FDA) guidance, provided good results in terms of linearity with r2≥0.9974, in the range from 0.15 or 0.3 µg·g-1 to 3 µg·g-1. Limits of detection and limits of quantification were 0.05 or 0.10 and 0.15 or 0.3 µg·g-1, respectively. Precision was tested as a relative standard deviation (RSD≤ 9.5%) and recoveries were between 95% and 110%. The method was applied in the characterization of aldehydes in forty-eight edible oil samples; with the highest concentration found in pomace olive oil for malondialdehyde at 6.64 µg·g-1.

Occurrence and exposure of 3-monochloropropanediol diesters in edible oils and oil-based foodstuffs from the Spanish market.

During the industrial refining process of edible oils and the manufacture of oil-based foodstuff, contaminants such as 3-monochloropropanediol (3-MCPD) fatty acid diesters can be produced. One hundred samples of different edible oils and related fatty food purchased from local Spanish markets were analyzed to evaluate the occurrence of these contaminants. Data of seven 3-MCPD diesters together with corresponding total 3-MCPD equivalents are presented. The procedure is based on a modified QuEChERS protocol followed by LC-MS/MS analysis. Extra virgin olive oil (EVOO) and unrefined oils did not contain detectable levels of the target analytes. The highest levels of 3-MCPD diesters were found in palm oils, for 1,2-Dilinoleoyl-3-chloropropanediol (LILI) and 1-2-Bispalmitoyl-3-chloropropanediol (PAPA) with concentrations close to 10 mg kg-1 and in the lipid fraction of margarines (8.09, 3.77 and 3.72 mg kg-1 for LILI, PAPA and 1-Oleoyl-2-linoleoyl-3-chloropropanediol (OLLI), respectively).

Development of a partitioned liquid-liquid extraction- dispersive solid phase extraction procedure followed by liquid chromatography-tandem mass spectrometry for analysis of 3-monochloropropane-1,2-diol diesters in edible oils.

A fast and effective method using a modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) approach which includes partitioned liquid-liquid extraction (PLLE) and dispersive solid phase extraction (dSPE) clean-up step for the determination of seven 3-monochloropropane-1,2-diol (3-MCPD) fatty acid diesters in vegetable oils is developed and validated according to the Food and Drug Administration (FDA) guidelines. Due to the complexity of the matrices, combination of silica based sorbents (Silica Strong Anion Exchange (Si-SAX), Supel™ QuE Z-Sep+ (Z-Sep+) and Primary Secondary Amine (PSA) were tested for lipid removal. The effect of several experimental factors on the efficiency of the extraction procedure was studied by a screening design 3422//16 and a response surface Doehlert design. The separation and determination was carried out by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). The method provided suitable linearity (r2 > 0.9960), precision (relative standard deviation (RSD) lower than 10%) and accuracy, in terms of recovery. The limits of detection (LOD) and limits of quantification (LOQ) ranged from 10 to 20 µg kg -1 and from 25 to 50 µg kg-1, respectively. The recoveries at three spiking levels of 100, 250, and 500 µg kg-1 were over the range of 71.4-122.9% with RSD lower than 13%. The method was successfully applied in edible oils and fatty food samples. The results provide valuable information to assess the risk of exposure to these foodborne contaminants.