Simultaneous stream assessment of antibiotics, bacteria, antibiotic resistant bacteria, and antibiotic resistance genes in an agricultural region of the United States.

Antimicrobial resistance (AMR) is now recognized as a leading global threat to human health. Nevertheless, there currently is a limited understanding of the environment's role in the spread of AMR and antibiotic resistance genes (ARGs). In 2019, the U.S. Geological Survey conducted the first statewide assessment of antibiotic resistant bacteria (ARB) and ARGs in surface water and bed sediment collected from 34 stream locations across Iowa. Environmental samples were analyzed for a suite of 29 antibiotics and plated on selective media for 15 types of bacteria growth; DNA was extracted from culture growth and used in downstream polymerase chain reaction (PCR) assays for the detection of 24 ARGs. ARGs encoding resistance to antibiotics of clinical importance to human health and disease prevention were prioritized as their presence in stream systems has the potential for environmental significance. Total coliforms, Escherichia coli (E. coli), and staphylococci were nearly ubiquitous in both stream water and stream bed sediment samples, with enterococci present in 97 % of water samples, and Salmonella spp. growth present in 94 % and 67 % of water and bed sediment samples. Bacteria enumerations indicate that high bacteria loads are common in Iowa's streams, with 23 (68 %) streams exceeding state guidelines for primary contact for E. coli in recreational waters and 6 (18 %) streams exceeding the secondary contact advisory level. Although antibiotic-resistant E. coli growth was detected from 40 % of water samples, vancomycin-resistant enterococci (VRE) and penicillinase-resistant Staphylococcus aureus (MRSA) colony growth was detected from nearly all water samples. A total of 14 different ARGs were detected from viable bacteria cells from 30 Iowa streams (88 %, n = 34). Study results provide the first baseline understanding of the prevalence of ARB and ARGs throughout Iowa's waterways and health risk potential for humans, wildlife, and livestock using these waterways for drinking, irrigating, or recreating.

Microbial Biotransformation Products and Pathways of Dichloroacetamide Herbicide Safeners.

Dichloroacetamide safeners are common ingredients in commercial herbicide formulations. We previously investigated the environmental fate of dichloroacetamides via photolysis and hydrolysis, but other potentially important, environmentally relevant fate processes remain uncharacterized and may yield products of concern. Here, we examined microbial biotransformation of two dichloroacetamide safeners, benoxacor and dichlormid, to identify products and elucidate pathways. Using aerobic microcosms inoculated with river sediment, we demonstrated that microbial biotransformations of benoxacor and dichlormid proceed primarily, if not exclusively, via cometabolism. Benoxacor was transformed by both hydrolysis and microbial biotransformation processes; in most cases, biotransformation rates were faster than hydrolysis rates. We identified multiple novel products of benoxacor and dichlormid not previously observed for microbial processes, with several products similar to those reported for structurally related chloroacetamide herbicides, thus indicating potential for conserved biotransformation mechanisms across both chemical classes. Observed products include monochlorinated species such as the banned herbicide CDAA (from dichlormid), glutathione conjugates, and sulfur-containing species. We propose a transformation pathway wherein benoxacor and dichlormid are first dechlorinated, likely via microbial hydrolysis, and subsequently conjugated with glutathione. This is the first study reporting biological dechlorination of dichloroacetamides to yield monochlorinated products in aerobic environments.

Simple fabrication of an electrospun polystyrene microfiber filter that meets N95 filtering facepiece respirator filtration and breathability standards.

During the global spread of COVID-19, high demand and limited availability of melt-blown filtration material led to a manufacturing backlog of N95 Filtering Facepiece Respirators (FFRs). This shortfall prompted the search for alternative filter materials that could be quickly mass produced while meeting N95 FFR filtration and breathability performance standards. Here, an unsupported, nonwoven layer of uncharged polystyrene (PS) microfibers was produced via electrospinning that achieves N95 performance standards based on physical parameters (e.g., filter thickness) alone. PS microfibers 3-6 µm in diameter and deposited in an ~5 mm thick filter layer are favorable for use in FFRs, achieving high filtration efficiencies (≥97.5%) and low pressure drops (≤15 mm H2O). The PS microfiber filter demonstrates durability upon disinfection with hydroxyl radicals (•OH), maintaining high filtration efficiencies and low pressure drops over six rounds of disinfection. Additionally, the PS microfibers exhibit antibacterial activity (1-log removal of E. coli) and can be modified readily through integration of silver nanoparticles (AgNPs) during electrospinning to enhance their activity (≥3-log removal at 25 wt% AgNP integration). Because of their tunable performance, potential reusability with disinfection, and antimicrobial properties, these electrospun PS microfibers may represent a suitable, alternative filter material for use in N95 FFRs.

Electrospun nanofiber mats as sorbents for polar emerging organic contaminants: Demonstrating tailorable material performance for uptake of neonicotinoid insecticides from water.

The number and diversity of chemical contaminants in aquatic environments require versatile technologies for their removal. Here we fabricated various electrospun nanofiber mats (ENMs) and tested their ability to sorb six neonicotinoid insecticides, a model family of small, polar contaminants. ENM formulations were polyacrylonitrile (PAN) or carbon nanofibers (CNF; carbonized from PAN), with additives including carbon nanotubes (CNTs; with and without surface carboxyl groups), the cationic surfactant tetrabutyl ammonium bromide (TBAB), and/or phthalic acid (PTA; a CNF porogen). While sorption on pure PAN ENMs was low [equilibrium partition coefficients (K ENM-W ) from 0.9 to 1.2 log units (L/kg)], inclusion of CNTs and/or TBAB generally increased uptake in an additive fashion, with carboxylated CNT composites outperforming non-functionalized CNT analogs. CNF ENMs exhibited as much as a tenfold increase relative to PAN for neonicotinoid sorption, which increased with carbonization temperature. Ultimately, the optimal ENM (CNFs with carboxylated-CNTs, PTA, and carbonized at 800 °C) exhibited relatively fast uptake (equilibrium < 1 day without mixing) and surface-area-normalized capacities comparable to other carbonaceous sorbents (e.g., activated carbon). Collectively, this work demonstrates the versatility of electrospinning to produce novel sorbents specifically designed to target emerging chemical classes for applications including water treatment and passive sampling.

Evaluation of airborne particulates and associated metals originating from steel slag applied to rural unpaved roads.

Various metals have toxic effects by the inhalation route, and electric arc furnace (EAF) steel slag is known to contain metals with a potential for toxicity to humans. In some states, EAF slag is applied to unpaved (gravel) roads as a low-cost supplement to limestone and other crushed stone, where it may be a public health concern for the local population. This study compared the mass of selected metals in the PM10 size fraction of fugitive dust from roads where slag was applied to metals in fugitive dust where slag was not applied. Manganese, designated by the EPA as a hazardous air pollutant (HAP) and one of the primary metals of concern in the slag, was 1.3 times more concentrated in the PM10 fraction from the slag-covered roads as compared to the PM10 fraction from the non-slag-covered roads, but that increase was not significant (p = 0.26). Other metals detected in the airborne dust from both slag-covered and non-slag-covered roads that are also designated as HAPs are antimony, arsenic, chromium, cobalt, lead, nickel, and selenium. In addition, hourly sampling of PM10 and metals in the PM10 fraction was conducted at one of the sample locations where slag had been applied to the road. Manganese mass in the PM10 was positively correlated (Spearman r = 0.86) with the particulate mass in the PM10. Wind direction and the interaction of traffic and wind direction were found to be statistically significant factors affecting manganese concentrations in the fugitive emissions from the road to which EAF slag had been applied. This research demonstrated that application of steel slag can result in elevated levels of manganese in the airborne dust generated by vehicular traffic on the unpaved roadway.

Prevalence of neonicotinoid insecticides in paired private-well tap water and human urine samples in a region of intense agriculture overlying vulnerable aquifers in eastern Iowa.

A pilot study among farming households in eastern Iowa was conducted to assess human exposure to neonicotinoids (NEOs). The study was in a region with intense crop and livestock production and where groundwater is vulnerable to surface-applied contaminants. In addition to paired outdoor (hydrant) water and indoor (tap) water samples from private wells, urine samples were collected from 47 adult male pesticide applicators along with the completions of dietary and occupational surveys. Estimated Daily Intake (EDI) were then calculated to examine exposures for different aged family members. NEOs were detected in 53% of outdoor and 55% of indoor samples, with two or more NEOs in 13% of samples. Clothianidin was the most frequently detected NEO in water samples. Human exposure was ubiquitous in urine samples. A median of 10 different NEOs and/or metabolites were detected in urine, with clothianidin, nitenpyram, thiamethoxam, 6-chloronicotinic acid, and thiacloprid amide detected in every urine samples analyzed. Dinotefuran, imidaclothiz, acetamiprid-N-desmethyl, and N-desmethyl thiamethoxam were found in ≥70% of urine samples. Observed water intake for study participants and EDIs were below the chronic reference doses (CRfD) and acceptable daily intake (ADI) standards for all NEOs indicating minimal risk from ingestion of tap water. The study results indicate that while the consumption of private well tap water provides a human exposure pathway, the companion urine results provide evidence that diet and/or other exposure pathways (e.g., occupational, house dust) may contribute to exposure more than water contamination. Further biomonitoring research is needed to better understand the scale of human exposure from different sources.

Juxtaposition of intensive agriculture, vulnerable aquifers, and mixed chemical/microbial exposures in private-well tapwater in northeast Iowa.

In the United States and globally, contaminant exposure in unregulated private-well point-of-use tapwater (TW) is a recognized public-health data gap and an obstacle to both risk-management and homeowner decision making. To help address the lack of data on broad contaminant exposures in private-well TW from hydrologically-vulnerable (alluvial, karst) aquifers in agriculturally-intensive landscapes, samples were collected in 2018-2019 from 47 northeast Iowa farms and analyzed for 35 inorganics, 437 unique organics, 5 in vitro bioassays, and 11 microbial assays. Twenty-six inorganics and 51 organics, dominated by pesticides and related transformation products (35 herbicide-, 5 insecticide-, and 2 fungicide-related), were observed in TW. Heterotrophic bacteria detections were near ubiquitous (94 % of the samples), with detection of total coliform bacteria in 28 % of the samples and growth on at least one putative-pathogen selective media across all TW samples. Health-based hazard index screening levels were exceeded frequently in private-well TW and attributed primarily to inorganics (nitrate, uranium). Results support incorporation of residential treatment systems to protect against contaminant exposure and the need for increased monitoring of rural private-well homes. Continued assessment of unmonitored and unregulated private-supply TW is needed to model contaminant exposures and human-health risks.

The dichloroacetamide safener benoxacor is enantioselectively metabolized by monkey liver microsomes and cytosol.

The metabolism and toxicity of current-use herbicide safeners remain understudied. We investigated the enantioselective metabolism of the safener benoxacor in Rhesus monkey subcellular fractions. Benoxacor was incubated with liver microsomes and cytosol from female and male monkeys (≤30 min). Benoxacor levels and enantiomeric fractions were determined with gas chromatography. Benoxacor was metabolized by microsomal cytochrome P450 enzymes (CYPs), cytosolic glutathione-S-transferases (GSTs), and microsomal and cytosolic carboxylesterase (CESs). CES-mediated microsomal metabolism followed the order males > females, whereas the CYP-mediated clearance followed the order females > males. CYP-mediated metabolism initially resulted in an enrichment of the second eluting benoxacor enantiomer (E2-benoxacor), whereas the first eluting benoxacor enantiomer (E1-benoxacor) was enriched after 10 or 30 min in female or male microsomal incubations. Benoxacor metabolism by GSTs was enantiospecific, with a total depletion of E1-benoxacor after approximately 20 min. Thus, the enantioselective metabolism of benoxacor by GSTs and CYPs may affect its toxicity.

U(VI) binding onto electrospun polymers functionalized with phosphonate surfactants.

We previously observed that phosphonate functionalized electrospun nanofibers can uptake U(VI), making them promising materials for sensing and water treatment applications. Here, we investigate the optimal fabrication of these materials and their mechanism of U(VI) binding under the influence of environmentally relevant ions (e.g., Ca2+ and CO 3 2 - ). We found that U(VI) uptake was greatest on polyacrylonitrile (PAN) functionalized with longer-chain phosphonate surfactants (e.g., hexa- and octadecyl phosphonate; HDPA and ODPA, respectively), which were better retained in the nanofiber after surface segregation. Subsequent uptake experiments to better understand specific solid-liquid interfacial interactions were carried out using 5 mg of HDPA-functionalized PAN mats with 10 µM U at pH 6.8 in four systems with different combinations of solutions containing 5 mM calcium (Ca2+) and 5 mM bicarbonate ( HCO 3 - ). U uptake was similar in control solutions containing no Ca2+ and HCO 3 - (resulting in 19 ± 3% U uptake), and in those containing only 5 mM Ca2+ (resulting in 20 ± 3% U uptake). A decrease in U uptake (10 ± 4% U uptake) was observed in experiments with HCO 3 - , indicating that UO2-CO3 complexes may increase uranium solubility. Results from shell-by-shell EXAFS fitting, aqueous extractions, and surface-enhanced Raman scattering (SERS) indicate that U is bound to phosphonate as a monodentate inner sphere surface complex to one of the hydroxyls in the phosphonate functional groups. New knowledge derived from this study on material fabrication and solid-liquid interfacial interactions will help to advance technologies for use in the in-situ detection and treatment of U in water.

School and childcare center drinking water: Copper chemistry, health effects, occurrence, and remediation.

The study goal was to better understand the risks of elevated copper levels at US schools and childcare centers. Copper health effects, chemistry, occurrence, and remediation actions were reviewed. Of the more than 98,000 schools and 500,000 childcare centers, only 0.2% had copper water testing data in the federal Safe Drinking Water Information System database. Of the facilities designated public water systems, about 13% had reported an exceedance. Schools that were not designated a public water system (PWS) also had exceedances. Few studies document levels in schools and childcare centers. Widely different sampling and remedial actions were reported. Flushing contaminated water was the most evaluated remedial action but was unreliable because copper quickly rebounded when flushing stopped. Building water treatment systems have been used, but some were not capable of making the water safe. The health risk was difficult to determine due to the limited occurrence data and lack of best management practice studies. A national drinking water testing campaign and field studies are recommended.

Combining Experimental Sorption Parameters with QSAR to Predict Neonicotinoid and Transformation Product Sorption to Carbon Nanotubes and Granular Activated Carbon.

We recently discovered that transformation of the neonicotinoid insecticidal pharmacophore alters sorption propensity to activated carbon, with products adsorbing less than parent compounds. To assess the environmental fate of novel transformation products that lack commercially available standards, researchers must rely on predictive approaches. In this study, we combined computationally derived quantitative structure-activity relationship (QSAR) parameters for neonicotinoids and neonicotinoid transformation products with experimentally determined Freundlich partition constants (log K F for sorption to carbon nanotubes [CNTs] and granular activated carbon [GAC]) to model neonicotinoid and transformation product sorption. QSAR models based on neonicotinoid sorption to functionalized/nonfunctionalized CNTs (used to generalize/simplify neonicotinoid-GAC interactions) were iteratively generated to obtain a multiple linear regression that could accurately predict neonicotinoid sorption to CNTs using internal and external validation (within 0.5 log units of the experimentally determined value). The log K F,CNT values were subsequently related to log K F,GAC where neonicotinoid sorption to GAC was predicted within 0.3 log-units of experimentally determined values. We applied our neonicotinoid-specific model to predict log K F,GAC for a suite of novel neonicotinoid transformation products (i.e., formed via hydrolysis, biotransformation, and chlorination) that do not have commercially available standards. We present this modeling approach as an innovative yet relatively simple technique to predict fate of highly specialized/unique polar emerging contaminants and/or transformation products that cannot be accurately predicted via traditional methods (e.g., pp-LFER), and highlights molecular properties that drive interactions of emerging contaminants.

Recent advances and remaining barriers to the development of electrospun nanofiber and nanofiber composites for point-of-use and point-of-entry water treatment systems.

In this review, we focus on electrospun nanofibers as a promising material alternative for the niche application of decentralized, point-of-use (POU) and point-of-entry (POE) water treatment systems. We focus our review on prior work with various formulations of electrospun materials, including nanofibers of carbon, pure metal oxides, functionalized polymers, and polymer-metal oxide composites, that exhibit analogous performance to media (e.g., activated carbon, ion exchange resins) commonly used in commercially available, certified POU/POE devices for contaminants including organic pollutants, metals (e.g., lead) and persistent oxyanions (e.g., nitrate). We then analyze the relevant strengths and remaining research and development opportunities of the relevant literature based on an evaluation framework that considers (i) performance comparison to commercial analogs; (ii) appropriate pollutant targets for POU/POE applications; (iii) testing in flow-through systems consistent with POU/POE applications; (iv) consideration of water quality effects; and (v) evaluation of material strength and longevity. We also identify several emerging issues in decentralized water treatment where nanofiber-based POU/POE devices could help meet existing needs including their use for treatment of uranium, disinfection, and in electrochemical treatment systems. To date, research has demonstrated promising material performance toward relevant targets for POU/POE applications, using appropriate aquatic matrices and considering material stability. To fully realize their promise as an emerging treatment technology, our analysis of the available literature reveals the need for more work that benchmarks nanofiber performance against established commercial analogs, as well as fabrication and performance validation at scales and under conditions simulating POU/POE water treatment.

Acid- and Base-Mediated Hydrolysis of Dichloroacetamide Herbicide Safeners.

Safeners are used extensively in commercial herbicide formulations. Although safeners are regulated as inert ingredients, some of their transformation products have enhanced biological activity. Here, to fill gaps in our understanding of safener environmental fate, we determined rate constants and transformation products associated with the acid- and base-mediated hydrolysis of dichloroacetamide safeners AD-67, benoxacor, dichlormid, and furilazole. Second-order rate constants for acid- (HCl) and base-mediated (NaOH) dichloroacetamide hydrolysis (2.8 × 10-3 to 0.46 and 0.3-500 M-1 h-1, respectively) were, in many cases (5 of 8), greater than those reported for their chloroacetamide herbicide co-formulants. In particular, the rate constant for base-mediated hydrolysis of benoxacor was 2 orders of magnitude greater than that of its active ingredient co-formulant, S-metolachlor. At circumneutral pH, only benoxacor underwent appreciable hydrolysis (5.3 × 10-4 h-1), and under high-pH conditions representative of lime-soda softening, benoxacor's half-life was 13 h─a timescale consistent with partial transformation during water treatment. Based on Orbitrap LC-MS/MS analysis of dichloroacetamide hydrolysis product mixtures, we propose structures for major products and three distinct mechanistic pathways that depend on the system pH and compound structure. These include base-mediated amide cleavage, acid-mediated amide cleavage, and acid-mediated oxazolidine ring opening. Collectively, this work will help to identify systems in which hydrolysis contributes to the transformation of dichloroacetamides, while also highlighting important differences in the reactivity of dichloroacetamides and their active chloroacetamide co-formulants.

Computational Approaches for the Prediction of Environmental Transformation Products: Chlorination of Steroidal Enones.

There is growing interest in the fate and effects of transformation products generated from emerging pollutant classes, and new tools that help predict the products most likely to form will aid in risk assessment. Here, using a family of structurally related steroids (enones, dienones, and trienones), we evaluate the use of density functional theory to help predict products from reaction with chlorine, a common chemical disinfectant. For steroidal dienones (e.g., dienogest) and trienones (e.g., 17ß-trenbolone), computational data support that reactions proceed through spontaneous C4 chlorination to yield 4-chloro derivatives for trienones and, after further reaction, 9,10-epoxide structures for dienones. For testosterone, a simple steroidal enone, in silico predictions suggest that C4 chlorination is still most likely, but slow at environmentally relevant conditions. Predictions were then assessed through laboratory chlorination reactions (0.5-5 mg Cl2/L) with product characterization via HRMS and NMR, which confirmed near exclusive 4-chloro and 9,10-epoxide products for most trienones and all dienones, respectively. Also consistent with computational expectations, testosterone was effectively unreactive at these same chlorine levels, although products consistent with in silico predictions were observed at higher concentrations (in excess of 500 mg Cl2/L). Although slight deviations from in silico predictions were observed for steroids with electron-rich substituents (e.g., C17 allyl-substituted altrenogest), this work highlights the potential for computational approaches to improve our understanding of transformation products generated from emerging pollutant classes.

Phosphate removal using surface enriched hematite and tetra-n-butylammonium bromide incorporated polyacrylonitrile composite nanofibers.

The nanosized iron oxides-based adsorbent has been widely used to alleviate water eutrophication. However, it is challenging to industrialize the application of nanosized iron oxides-based adsorbent due to their poor stability, difficult separation and recovery. Herein, hematite and tetra-n-butylammonium bromide incorporated polyacrylonitrile (PAN/Fe2O3/TBAB) composite nanofibers with a controlled diameter (i.e., 66 to 305 nm) and composition were systematically synthesized as an adsorbent for phosphate removal from water using surfactant-mediated electrospinning. During the electrospinning process, polar TBAB surfactant enhanced the migration of Fe2O3 nanoparticles toward the surface of nanofibers resulting in Fe2O3 nanoparticles/TBAB surface enriched nanofibers. The synthesized nanofiber membranes were used for phosphate removal, and their adsorption kinetics, adsorption mechanism, and reusability were investigated. Data showed that adsorption kinetic followed the pseudo-second-order model whereas the adsorption mechanism follows the Langmuir model. The phosphate removal was mainly derived from the chemisorption of surface-enriched α-Fe2O3 nanoparticles at acidic and circumneutral pH values, with a small contribution from anion exchange at TBAB sites. The maximum phosphate removal capacity was approx. 8.76 mg/g (i.e., 23.1 mg/g, P/active materials) at pH 3. Additionally, the synthesized nanofiber membrane also shows excellent reusability.

Web-based data analytics framework for well forecasting and groundwater quality.

Groundwater supplies drinking water for over one-third of all Americans. However, with aquifers stressed by overdraft, contamination from land use, and the hydrologic impacts of climate change, identifying reliable sources for new wells is increasingly challenging. Well forecasting is a process in which potential groundwater resources are evaluated for a location of interest. While this process forecasts the depth of each aquifer for a given location, it takes historical groundwater well data from nearby locations into account. Conventionally, well forecasting is done by geological survey professionals by manually analyzing the well data and, that makes the process both time and resource-intensive. This study presents a novel web application that performs well forecasting for any location within the state of Iowa in a matter of seconds utilizing client-side computing instead of expensive professional labor. The web application generates well forecasts by triangulating millions of combinations of historical aquifer depth data of nearby wells stored in a state-level database. The proposed web system also provides water quality information for arsenic, nitrate, and bacteria (total c and fecal coliform) on the same interface with forecasts. The system is open to the public and is aimed to provide a go-to tool for homeowners, well drillers and, authorities to help inform decision-making regarding groundwater well development and water quality monitoring efforts.

Use of real-time sensors for compliance monitoring of nitrate in finished drinking water.

Across the Midwestern United States, Public Water Systems (PWSs) struggle with high levels of nitrate in source waters from intense agricultural activity. Leveraging a sensor network deployed across Iowa surface waters, we evaluated the potential of the Hach Nitratax SC Plus, which uses UV-light absorption to quantify dissolved nitrate-nitrite (NOx-N) down to 0.1 mg-N L-1, for real-time monitoring of NOx-N in drinking water. For six different PWSs over multiple years, we compare NOx-N levels in source waters (surface and groundwater under surface influence) to those measured via traditional methods (e.g., ion chromatography (IC)) for US EPA compliance monitoring. At one large PWS, we also evaluated sensor performance when applied to near-finished drinking water (filter effluent). We find good agreement between traditional analytical methods and in situ sensors. For example, for 771 filter effluent samples from 2006-2011, IC analysis averaged NOx-N of 5.8 mg L-1 while corresponding sensor measurements averaged 5.7 mg L-1 with a mean absolute error of 0.23 (5.6%). We identify several benefits of using real-time sensors in PWSs, including improved frequency to capture elevated NOx-N levels and as decision-support tools for NOx-N management.

Differences in Neonicotinoid and Metabolite Sorption to Activated Carbon Are Driven by Alterations to the Insecticidal Pharmacophore.

Widespread application of neonicotinoids has led to their proliferation in waters. Despite low neonicotinoid hydrophobicity, our prior studies implicated granular activated carbon (GAC) in neonicotinoid removal. Based on known receptor binding characteristics, we hypothesized that the insecticidal pharmacophore influences neonicotinoid sorption. Our objectives were to illuminate drivers of neonicotinoid sorption for parent neonicotinoids (imidacloprid, clothianidin, thiamethoxam, and thiacloprid) and pharmacophore-altered metabolites (desnitro-imidacloprid and imidacloprid urea) to GAC, powdered activated carbon, and carbon nanotubes (CNTs). Neonicotinoid sorption to GAC was extensive and largely irreversible, with significantly greater sorption of imidacloprid than desnitro-imidacloprid. Imidacloprid and imidacloprid urea (electronegative pharmacophores) sorbed most extensively to nonfunctionalized CNTs, whereas desnitro-imidacloprid (positive pharmacophore) sorbed most to COOH-CNTs, indicating the importance of charge interactions and/or hydrogen bonding between the pharmacophore and carbon surface. Water chemistry parameters (temperature, alkalinity, ionic strength, and humic acid) inhibited overall neonicotinoid sorption, suggesting that pharmacophore-driven sorption in real waters may be diminished. Analysis of a full-scale drinking water treatment plant GAC filter influent, effluent, and spent GAC attributes neonicotinoid/metabolite removal to GAC under real-world conditions for the first time. Our results demonstrate that the neonicotinoid pharmacophore not only confers insecticide selectivity but also impacts sorption behavior, leading to less effective removal of metabolites by GAC filters in water treatment.

Benoxacor is enantioselectively metabolized by rat liver subcellular fractions.

This study investigated the enantioselective metabolism of benoxacor, an ingredient of herbicide formulations, in microsomes or cytosol prepared from female or male rat livers. Benoxacor was incubated for ≤30 min with microsomes or cytosol, and its enantioselective depletion was measured using gas chromatographic methods. Benoxacor was depleted in incubations with active microsomes in the presence and absence of NADPH, suggesting its metabolism by hepatic cytochrome P450 enzymes (CYPs) and microsomal carboxylesterases (CESs). Benoxacor was depleted in cytosolic incubations in the presence of glutathione, consistent with its metabolism by glutathione S-transferases (GSTs). The depletion of benoxacor was faster in incubations with cytosol from male than female rats, whereas no statistically significant sex differences were observed in microsomal incubations. The consumption of benoxacor was inhibited by the CYP inhibitor 1-aminobenzotriazole, the CES inhibitor benzil, and the GST inhibitor ethacrynic acid. Estimates of the intrinsic clearance of benoxacor suggest that CYPs are the primary metabolic enzyme responsible for benoxacor metabolism in rats. Microsomal incubations showed an enrichment of the first eluting benoxacor enantiomer (E1-benoxacor). A greater enrichment occurred in incubations with microsomes from female (EF = 0.67 ± 0.01) than male rats (EF = 0.60 ± 0.01). Cytosolic incubations from female rats resulted in enrichment of E1-benoxacor (EF = 0.54 ± 0.01), while cytosolic incubations from male rats displayed enrichment of the second eluting enantiomer (E2-benoxacor; EF = 0.43 ± 0.01). Sex-dependent differences in the metabolism of benoxacor in rats could significantly impact ecological risks and mammalian toxicity. Moreover, changes in the enantiomeric enrichment of benoxacor may be a powerful tool for environmental fate and transport studies.

Photolysis of Trenbolone Acetate Metabolites in the Presence of Nucleophiles: Evidence for Metastable Photoaddition Products and Reversible Associations with Dissolved Organic Matter.

Photolysis of trenbolone acetate (TBA) metabolites in the presence of various nitrogen-, sulfur-, or oxygen-containing nucleophiles (e.g., azide, ammonia, or thiosulfate, respectively) results in rapid (half-lives ∼20-60 min), photochemically induced nucleophile incorporation across the parent steroid's trienone moiety. The formation of such nucleophile adducts limits formation of photohydrates, suggesting competition between the nucleophile and water for photochemical addition into the activated steroid structure. Analogous to previously reported photohydration outcomes, LC/MS analyses suggest that such photonucleophilic addition reactions are reversible, with more rapid elimination rates than thermal dehydration of photohydrates, and regenerate parent steroid structures. Beyond photonucleophilic addition pathways, we also found that hydroxylamine and presumed nucleophilic moieties in model dissolved organic matter (DOM; Fluka humic acid) can react via thermal substitution with TBA metabolite photohydrates, although this reaction with model DOM was only observed for photohydrates of trendione. Most nucleophile addition products [i.e., formed via (photo)reaction with thiosulfate, hydroxylamine, and ammonia] are notably more polar relative to the parent metabolite and photohydration products. Thus, if present, both nucleophilic adducts and bound residues in organic matter will facilitate transport and help mask detection of TBA metabolites in surface waters and treatment systems.