Immobilization of ZnIn2S4 on sodium alginate foam for efficient hexavalent chromium removal.

Photocatalytic technology has been extensively studied in the removal of toxic Cr(VI) from wastewater. However, common powdery photocatalysts suffer from poor recyclability and secondly pollution. Herein, the zinc indium sulfide (ZnIn2S4) particles were integrated onto the sodium alginate foam(SA) matrix through a facile way to obtain foam-shape catalyst. Diverse characterization techniques including X-ray diffraction(XRD), Fourier transform infrared(FT-IR), scanning electron microscope(SEM) and X-ray photoelectron spectroscopy(XPS) were employed to reveal the composite compositions, organic-inorganic interface interactions, mechanical property, and pore morphology of the foams. Results demonstrated that the ZnIn2S4 crystals wrapped on SA skeleton tightly and constructed a flower-like structure. As-prepared hybrid foam with lamellar structure showed great potential in Cr(VI) treatment due to the presence of macropores and highly available active sites. A maximum Cr(VI) photoreduction efficiency of 93 % were observed over the optimal sample of ZS-1 (with a ZnIn2S4:SA mass ratio of 1:1) under visible irradiation. When tested with mixed pollutants (Cr(VI)/dyes), the ZS-1 sample displayed an enhanced removal efficiency of 98 % for Cr(VI) and 100 % for Rhodamine B(RhB). Moreover, the composite maintained prominent photocatalytic performance and a relatively integral 3D structure scaffold after continuous six runs, revealing its superior reusability and durability.

Multifunctional Bacterial Cellulose Films Enabled by Deep Eutectic Solvent-Extracted Lignin.

Inspired by natural plant cells, lignin is utilized as a filler and a functional agent to modify bacterial cellulose (BC). By mimicking the lignin-carbohydrate structure, deep eutectic solvent (DES)-extracted lignin serves as a glue to strength the BC films and endows the films with diverse functionality. The lignin isolated by the DES (formed by choline chloride and lactic acid) is rich in phenol hydroxyl groups (5.5 mmol/g) and exhibits a narrow molecular weight distribution. A good interface compatibility can be obtained in the composite film, and lignin fills the void/gaps between BC fibrils. The integration of lignin endows the films with enhanced water-proof, mechanical, UV shielding, gas barrier, and antioxidant abilities. The BC/lignin composite film with 0.4 g of lignin addition (BL-0.4) exhibits an oxygen permeability and a water vapor transmission rate of 0.4 mL/m2/day/Pa and 0.9 g/m2/day, respectively. The multifunctional films are promising candidates for packing materials and exhibit a broad application prospect in the field of petroleum-based polymer replacement.

BiVO4-Deposited MIL-101-NH2 for Efficient Photocatalytic Elimination of Cr(VI).

In this study, a flower-like BiVO4/MIL-101-NH2 composite is synthesized by a facile and surfactant-free process. The -COO--Bi3+ ionic bond construction was conductive to enhance the interface affinity between BiVO4 and MIL-101-NH2. Due to the highly efficient light capture and sufficient electron traps induced by oxygen vacancies and the formation of a heterostructure, the improved separation and transportation rates of charge carriers are realized. In addition, the MIL-101-NH2/BiVO4 composite is favorable for Cr(VI) photocatalytic removal (91.2%). Moreover, FNBV-3 (Fe/Bi = 0.25) also exhibited an excellent reusability after five cycles.

Characteristics of air quality in different climatic zones of China during the COVID-19 lockdown.

The diverse climate types and the complex anthropogenic source emissions in China lead to the great regional differences of air pollution mechanisms. The COVID-19 lockdown has given us a precious opportunity to understand the effect of weather conditions and anthropogenic sources on the distribution of air pollutants in different climate zones. In this study, to understand the impact of meteorological and socio-economic factors on air pollution during COVID-19 lockdown, we divided 358 Chinese cities into eight climate regions. Temporal, spatial and diurnal variations of six major air pollutants from January 1 to April 18, 2020 were analyzed. The differences in the characteristics of air pollutants in different climate zones were obvious. PM2.5 reduced by 59.0%-64.2% in cold regions (North-East China (NEC) and North-Western (NW)), while O3 surged by 99.0%-99.9% in warm regions (Central South (CS) and Southern Coast (SC)). Diurnal variations of atmospheric pollutants were also more prominent in cold regions. Moreover, PM2.5, PM10, CO and SO2 showed more prominent reductions (20.5%-64.2%) in heating regions (NEC, NW, NCP and MG) than no-heating regions (0.8%-48%). Climate has less influence on NO2, which dropped by 41.2%-57.1% countrywide during the lockdown. The influences of weather conditions on the atmospheric pollutants in different climate zones were different. The wind speed was not the primary reason for the differences in air pollutants in different climate zones. Temperature, precipitation, and air pollution emissions led to prominent regional differences in air pollutants throughout the eight climates. The effect of temperature on PM, SO2, CO, and NO2 varied obviously with the latitude, at which condition temperature was negatively correlated to PM, SO2, CO, and NO2 in the north but positively in the south. The temperature was positively correlated to ozone in different climate zones, and the correlation was the highest in NEC and the lowest in SC. The rainfall has a strong removal effect on atmospheric pollutants in the climate regions with more precipitation, but it increases the pollutant concentrations in the climate regions with less precipitation. In regions with more emission sources, air pollutants experienced more significant variations and returned to pre-lockdown levels earlier.