Extrusion 3D Printing of Intrinsically Fluorescent Thermoplastic Polyimide: Revealing an Undisclosed Potential.

Thermoplastic polyimides (TPIs) are promising lightweight materials for replacing metal components in aerospace, rocketry, and automotive industries. Key TPI attributes include low density, thermal stability, mechanical strength, inherent flame retardancy, and intrinsic fluorescence under UV light. The application of advanced manufacturing techniques, especially 3D printing, could significantly broaden the use of TPIs; however, challenges in melt-processing this class of polymer represent a barrier. This study explored the processability, 3D-printing and hence mechanical, and fluorescence properties of TPI coupons, demonstrating their suitability for advanced 3D-printing applications. Moreover, the study successfully 3D-printed a functional impeller for an overhead stirrer, effectively replacing its metallic counterpart. Defects were shown to be readily detectable under UV light. A thorough analysis of TPI processing examining its rheological, morphological, and thermal properties is presented. Extruded TPI filaments were 3D-printed into test coupons with different infill geometries to examine the effect of tool path on mechanical performance. The fluorescence properties of the 3D-printed TPI coupons were evaluated to highlight their potential to produce intricately shaped thermally stable, fluorescence-based sensors.

Effect of Heat Treatment on the Material Property and Cell Viability of Wire Arc Additively Manufactured Ti6Al4 V.

Wire arc additive manufacturing (WAAM) holds promise for producing medium to large industrial components. Application of WAAM in the manufacturing of biomedical materials has not yet been evaluated. The current study addresses two key research questions: first, the suitability of the WAAMed Ti6Al4V alloy for biomedical applications, and second, the effect of Ti6Al4V's constituents (α and ß phases) on the cell viability. The WAAMed Ti6Al4V alloy was fabricated (as-deposited: AD) using a metal inert gas (MIG)-based wire arc system using an in-house designed shielding chamber filled with argon. Subsequently, samples were subjected to solution treatment (950 °C for 1 h), followed by aging at 480 °C (T1), 530 °C (T2), and 580 °C (T3) for 8 h and subsequent normalization to ambient conditions. Microstructural analysis revealed ∼45.45% of α'-Ti colonies in the as-deposited samples, reducing to 23.26% postaging at 580 °C (T3). The α-lath thickness and interstitial oxygen content in the sample were observed to be proportional to the aging temperature, peaking at 580 °C (T3). Remarkably, during tribocorrosion analysis in simulated body fluid, the 580 °C-aged T3 sample displayed the lowest corrosion rate (7.9 µm/year) and the highest coefficient of friction (CoF) at 0.58, showing the effect of increasing oxygen content in the alloy matrix. Cell studies showed significant growth at 530 and 580 °C by day 7, correlated with higher oxygen content, while other samples had declining cell density. Additionally, optimal metallurgical property ranges were identified to enhance the Ti6Al4V alloy's biocompatibility, providing crucial insights for biomedical implant development.

Nanocapsules Comprised of Purified Protein: Construction and Applications in Vaccine Research.

Nanoparticles show great promise as a platform for developing vaccines for the prevention of infectious disease. We have been investigating a method whereby nanocapsules can be formulated from protein, such that the final capsules contain only the cross-linked protein itself. Such nanocapsules are made using a silica templating system and can be customised in terms of size and porosity. Here we compare the construction and characteristics of nanocapsules from four different proteins: one a model protein (ovalbumin) and three from infectious disease pathogens, namely the influenza virus, Helicobacter pylori and HIV. Two of the nanocapsules were assessed further. We confirm that nanocapsules constructed from the urease A subunit of H. pylori can reduce subsequent infection in a vaccinated mouse model. Further, we show that capsules constructed from the HIV gp120 protein can be taken up by dendritic cells in tissue culture and can be recognised by antibodies raised against the virus. These results point to the utility of this method in constructing protein-only nanocapsules from proteins of varying sizes and isoelectric points.

Genetic Transformation of Plasmid DNA into Escherichia coli Using High Frequency Electromagnetic Energy.

We present a novel technique of genetic transformation of bacterial cells mediated by high frequency electromagnetic energy (HF EME). Plasmid DNA, pGLO (5.4 kb), was successfully transformed into Escherichia coli JM109 cells after exposure to 18 GHz irradiation at a power density between 5.6 and 30 kW m-2 for 180 s at temperatures ranging from 30 to 40 °C. Transformed bacteria were identified by the expression of green fluorescent protein (GFP) using confocal scanning microscopy (CLSM) and flow cytometry (FC). Approximately 90.7% of HF EME treated viable E. coli cells exhibited uptake of the pGLO plasmid. The interaction of plasmid DNA with bacteria leading to transformation was confirmed by using cryogenic transmission electron microscopy (cryo-TEM). HF EME-induced plasmid DNA transformation was shown to be unique, highly efficient, and cost-effective. HF EME-induced genetic transformation is performed under physiologically friendly conditions in contrast to existing techniques that generate higher temperatures, leading to altered cellular integrity. This technique allows safe delivery of genetic material into bacterial cells, thus providing excellent prospects for applications in microbiome therapeutics and synthetic biology.

Piercing of the Human Parainfluenza Virus by Nanostructured Surfaces.

This paper presents a comprehensive experimental and theoretical investigation into the antiviral properties of nanostructured surfaces and explains the underlying virucidal mechanism. We used reactive ion etching to fabricate silicon (Si) surfaces featuring an array of sharp nanospikes with an approximate tip diameter of 2 nm and a height of 290 nm. The nanospike surfaces exhibited a 1.5 log reduction in infectivity of human parainfluenza virus type 3 (hPIV-3) after 6 h, a substantially enhanced efficiency, compared to that of smooth Si. Theoretical modeling of the virus-nanospike interactions determined the virucidal action of the nanostructured substrata to be associated with the ability of the sharp nanofeatures to effectively penetrate the viral envelope, resulting in the loss of viral infectivity. Our research highlights the significance of the potential application of nanostructured surfaces in combating the spread of viruses and bacteria. Notably, our study provides valuable insights into the design and optimization of antiviral surfaces with a particular emphasis on the crucial role played by sharp nanofeatures in maximizing their effectiveness.

Advanced flexible transvaginal mesh with high visibility under computerized tomography (CT) scan.

Pelvic floor disorders, including pelvic organ prolapse (POP) and stress urinary incontinence (SUI), are serious and very common. Surgery is commonly undertaken to restore the strength of the vaginal wall using transvaginal surgical mesh (TVM). However, up to 15% of TVM implants result in long-term complications, including pain, recurrent symptoms, and infection.Clinical Relevance- In this study, a new bioengineered TVM has been developed to address these issues. The TVM is visible using noninvasive imaging techniques such as computed tomography (CT); it has a highly similar structural profile to human tissue and potential to reduce pain and inflammation. These combined technological advances have the potential to revolutionize women's health.

An Evaluation of Urease A Subunit Nanocapsules as a Vaccine in a Mouse Model of Helicobacter pylori Infection.

Using removable silica templates, protein nanocapsules comprising the A subunit of Helicobacter pylori urease (UreA) were synthesised. The templates were of two sizes, with solid core mesoporous shell (SC/MS) silica templates giving rise to nanocapsules of average diameter 510 nm and mesoporous (MS) silica templates giving rise to nanocapsules of average diameter 47 nm. Both were shown to be highly monodispersed and relatively homogenous in structure. Various combinations of the nanocapsules in formulation were assessed as vaccines in a mouse model of H. pylori infection. Immune responses were evaluated and protective efficacy assessed. It was demonstrated that vaccination of mice with the larger nanocapsules combined with an adjuvant was able to significantly reduce colonisation.

In Vitro Antiproliferative Effect of Cannabis Extract PHEC-66 on Melanoma Cell Lines.

Melanoma, an aggressive form of skin cancer, can be fatal if not diagnosed and treated early. Melanoma is widely recognized to resist advanced cancer treatments, including immune checkpoint inhibitors, kinase inhibitors, and chemotherapy. Numerous studies have shown that various Cannabis sativa extracts exhibit potential anticancer effects against different types of tumours both in vitro and in vivo. This study is the first to report that PHEC-66, a Cannabis sativa extract, displays antiproliferative effects against MM418-C1, MM329 and MM96L melanoma cells. Although these findings suggest that PHEC-66 has promising potential as a pharmacotherapeutic agent for melanoma treatment, further research is necessary to evaluate its safety, efficacy, and clinical applications.

Translocation and fate of nanospheres in pheochromocytoma cells following exposure to synchrotron-sourced terahertz radiation.

The routes by which foreign objects enter cells is well studied; however, their fate following uptake has not been explored extensively. Following exposure to synchrotron-sourced (SS) terahertz (THz) radiation, reversible membrane permeability has been demonstrated in eukaryotic cells by the uptake of nanospheres; nonetheless, cellular localization of the nanospheres remained unclear. This study utilized silica core-shell gold nanospheres (AuSi NS) of diameter 50 ± 5 nm to investigate the fate of nanospheres inside pheochromocytoma (PC 12) cells following SS THz exposure. Fluorescence microscopy was used to confirm nanosphere internalization following 10 min of SS THz exposure in the range 0.5-20 THz. Transmission electron microscopy followed by scanning transmission electron microscopy energy-dispersive spectroscopic (STEM-EDS) analysis was used to confirm the presence of AuSi NS in the cytoplasm or membrane, as single NS or in clusters (22% and 52%, respectively), with the remainder (26%) sequestered in vacuoles. Cellular uptake of NS in response to SS THz radiation could have suitable applications in a vast number of biomedical applications, regenerative medicine, vaccines, cancer therapy, gene and drug delivery.

Targeting telomerase utilizing zeolitic imidazole frameworks as non-viral gene delivery agents across different cancer cell types.

Telomerase, a ribonucleoprotein coded by the hTERT gene, plays an important role in cellular immortalization and carcinogenesis. hTERT is a suitable target for cancer therapeutics as its activity is highly upregulated in most of cancer cells but absent in normal somatic cells. Here, by employing the two Metal-Organic Frameworks (MOFs), viz. ZIF-C and ZIF-8, based biomineralization we encapsulate Clustered Regularly Interspaced Short Palindromic Repeat (CRISPR)/Cas9 plasmid system that targets hTERT gene (CrhTERT) in cancer cells. When comparing the two biocomposites, ZIF-C shows the better loading capacity and cell viability. The loaded plasmid in ZIF-C is highly protected against enzymatic degradation. CrhTERT@ZIF-C is efficiently endocytosed by cancer cells and the subcellular release of CrhTERT leads to telomerase knockdown. The resultant inhibition of hTERT expression decreases cellular proliferation and causing cancer cell death. Furthermore, hTERT knockdown shows a significant reduction in tumour metastasis and alters protein expression. Collectively we show the high potential of ZIF-C-based biocomposites as a promising general tool for gene therapy of different types of cancers.

Momordica cochinchinensis (Gac) Seed Extracts Induce Apoptosis and Necrosis in Melanoma Cells.

Momordica cochinchinensis is a herbal medicine used throughout Asia and this study investigated the antimelanoma potentials and molecular mechanisms of M. cochinchinensis seed with emphasis on extraction to optimise bioactivity. Overall, the aqueous extract was superior, with a wider diversity and higher concentration of proteins and peptides that was more cytotoxic to the melanoma cells than other extraction solvents. The IC50 of the aqueous extract on melanoma cells were similar to treatment with current anticancer drugs, vemurafenib and cisplatin. This cytotoxicity was cancer-specific with lower cytotoxic effects on HaCaT epidermal keratinocytes. Cytotoxicity correlated with MAPK signalling pathways leading to apoptosis and necrosis induced by triggering tumour necrosis factor receptor-1 (TNFR1), reducing the expression of nuclear factor kappa B (NF-kB), and suppression of BRAF/MEK. This efficacy of M. cochinchinensis seed extracts on melanoma cells provides a platform for future clinical trials as potent adjunctive therapy for metastatic melanoma.

The impact of electrical stimulation protocols on neuronal cell survival and proliferation using cell-laden GelMA/graphene oxide hydrogels.

The development of electroactive cell-laden hydrogels (bioscaffolds) has gained interest in neural tissue engineering research due to their inherent electrical properties that can induce the regulation of cell behaviour. Hydrogels combined with electrically conducting materials can respond to external applied electric fields, where these stimuli can promote electro-responsive cell growth and proliferation. A successful neural interface for electrical stimulation should present the desired stable electrical properties, such as high conductivity, low impedance, increased charge storage capacity and similar mechanical properties related to a target neural tissue. We report how different electrical stimulation protocols can impact neuronal cells' survival and proliferation when using cell-laden GelMA/GO hydrogels. The rat pheochromocytoma cell line, PC12s encapsulated into hydrogels showed an increased proliferation behaviour with increasing current amplitudes applied. Furthermore, the presence of GO in GelMA hydrogels enhanced the metabolic activity and DNA content of PC12s compared with GelMA alone. Similarly, hydrogels provided survival of encapsulated cells at higher current amplitudes when compared to cells seeded onto ITO flat surfaces, which expressed significant cell death at a current amplitude of 2.50 mA. Our findings provide new rational choices for electroactive hydrogels and electrical stimulation with broad potential applications in neural tissue engineering research.

Influence of growth rates, microstructural properties and biochemical composition on the thermal stability of mycelia fungi.

Mycelium fungal species exhibit fire retardant characteristics. The influence of the growth media on the fungal growth rates, biochemical composition, and microstructural characteristics and their relationship to thermal properties is poorly understood. In this paper, we demonstrate that molasses can support the growth of non-pathogenic Basidiomycota phylum fungal species producing bio-derived materials with potential fire retardation characteristics. Scanning electron microscopy and Fourier transform infrared (FTIR) spectrometry were used to interrogate the microstructural and biochemical properties of the molasses-grown mycelia species. Thermal decomposition of molasses-fed mycelia was evaluated via thermogravimetric analysis interfaced with FTIR for real-time evolved gas analysis. The morphological and microstructural characteristics of the residual char post-thermal exposure were also evaluated. The material characterization enabled the establishment of a relationship between the microstructural, biochemical properties, and thermal properties of molasses-fed mycelia. This paper presents a comprehensive exploration of the mechanisms governing the thermal degradation of three mycelial species grown in molasses. These research findings advance the knowledge of critical parameters controlling fungal growth rates and yields as well as how the microstructural and biochemical properties influence the thermal response of mycelia.

Application of Fluconazole-Loaded pH-Sensitive Lipid Nanoparticles for Enhanced Antifungal Therapy.

Cryptococcus neoformans is a yeast-like fungus that can cause the life-threatening disease cryptococcal meningitis. Numerous reports have shown increased resistance of this fungus against antifungal treatments, such as fluconazole (Fluc), contributing to an 80% global mortality rate. This work presents a novel approach to improve the delivery of the antifungal agent Fluc and increase the drug's targetability and availability at the infection site. Exploiting the acidic environment surrounding a C. neoformans infected site, we have developed pH-sensitive lipid nanoparticles (LNP) encapsulating Fluc to inhibit the growth of resistant C. neoformans. The LNP-Fluc delivery system consists of a neutral lipid monoolein (MO) and a novel synthetic ionizable lipid 2-morpholinoethyl oleate (O2ME). At neutral pH, because of the presence of O2ME, the nanoparticles are neutral and exhibit a liquid crystalline hexagonal nanostructure (hexosomes). At an acidic pH, they are positively charged with a cubic nanostructure (cubosomes), which facilitates the interaction with the negatively charged fungal cell wall. This interaction results in the MIC50 and MIC90 values of the LNP-Fluc being significantly lower than that of the free-Fluc control. Confocal laser scanning microscopy and scanning electron microscopy further support the MIC values, showing fungal cells exposed to LNP-Fluc at acidic pH were heavily distorted, demonstrating efflux of cytoplasmic molecules. In contrast, fungal cells exposed to Fluc alone showed cell walls mostly intact. This current study represents a significant advancement in delivering targeted antifungal therapy to combat fungal antimicrobial resistance.

Campylobacter bilis sp. nov., isolated from chickens with spotty liver disease.

A novel species of Campylobacter was isolated from bile samples of chickens with spotty liver disease in Australia, making it the second novel species isolated from chickens with the disease, after Campylobacter hepaticus was isolated and described in 2016. Six independently derived isolates were obtained. They were Gram-stain-negative, microaerobic, catalase-positive, oxidase-positive and urease-negative. Unlike most other species of the genus Campylobacter, more than half of the tested strains of this novel species hydrolysed hippurate and most of them could not reduce nitrate. Distinct from C. hepaticus, many of the isolates were sensitive to 2,3,5-triphenyltetrazolium chloride (0.04%) and metronidazole (4 mg ml-1), and all strains were sensitive to nalidixic acid. Phylogenetic analysis using 16S rRNA and hsp60 gene sequences demonstrated that the strains formed a robust clade that was clearly distinct from recognized Campylobacter species. Whole genome sequence analysis of the strains showed that the average nucleotide identity and the genome blast distance phylogeny values compared to other Campylobacter species were less than 86 and 66%, respectively, which are below the cut-off values generally recognized for isolates of the same species. The genome of the novel species has a DNA G+C content of 30.6 mol%, while that of C. hepaticus is 27.9 mol%. Electron microscopy showed that the cells were spiral-shaped, with bipolar unsheathed flagella. The protein spectra generated from matrix-assisted laser desorption/ionization time of flight analysis demonstrated that they are different from the most closely related Campylobacter species. These data indicate that the isolates belong to a novel Campylobacter species, for which the name Campylobacter bilis sp. nov. is proposed. The type strain is VicNov18T (=ATCC TSD-231T=NCTC 14611T).

Functionalized Concave Cube Gold Nanoparticles as Potent Antimicrobial Agents against Pathogenic Bacteria.

Gold (Au) is an inert metal in a bulk state; however, it can be used for the preparation of Au nanoparticles (i.e., AuNPs) for multidimensional applications in the field of nanomedicine and nanobiotechnology. Herein, monodisperse concave cube AuNPs (CCAuNPs) were synthesized and functionalized with a natural antioxidant lipoic acid (LA) and a tripeptide glutathione (GSH) because different crystal facets of AuNPs provide binding sites for distinct ligands. There was an ∼10 nm bathochromic shift of the UV-vis spectrum when CCAuNPs were functionalized with LA, and the size of the as-synthesized monodisperse CCAu nanoparticles was 76 nm. The LA-functionalized CCAu nanoparticles (i.e., CCAuLA) showed the highest antibacterial activity against Bacillus subtilis. Both fluorescence images and scanning electron microscopy images confirm the damage of the bacterial cell wall as the mode of antibacterial activity of CCAuNPs. CCAuNPs also cause the oxidation of bacterial cell membrane fatty acids to produce reactive oxygen species, which pave the way for the death of bacteria. Both CCAu nanoparticles and their functionalized derivatives showed excellent hemocompatibility (i.e., percentage of hemolysis is <5% at 80 µg of AuNPs) to human red blood cells and very high biocompatibility to HeLa, L929, and Chinese hamster ovary-green fluorescent protein (CHO-GFP) cells. Taken together, LA and GSH enhance the antibacterial activity and biocompatibility, respectively, of CCAu nanoparticles that interact with the bacteria through Coulomb as well as hydrophobic interactions before demonstrating antibacterial propensity.

Illuminating the biochemical interaction of antimicrobial few-layer black phosphorus with microbial cells using synchrotron macro-ATR-FTIR.

In the fight against drug-resistant pathogenic bacterial and fungal cells, low-dimensional materials are emerging as a promising alternative treatment method. Specifically, few-layer black phosphorus (BP) has demonstrated its effectiveness against a wide range of pathogenic bacterial and fungal cells with studies suggesting low cytotoxicity towards healthy mammalian cells. However, the antimicrobial mechanism of action of BP is not well understood. Before new applications for this material can be realised, further in-depth investigations are required. In this work, the biochemical interaction between BP and a series of microbial cells is investigated using a variety of microscopy and spectroscopy techniques to provide a greater understanding of the antimicrobial mechanism. Synchrotron macro-attenuated total reflection-Fourier transform infrared (ATR-FTIR) micro-spectroscopy is used to elucidate the chemical changes occurring outside and within the cell of interest after exposure to BP nanoflakes. The ATR-FTIR data, coupled with high-resolution microscopy, reveals major physical and bio-chemical changes to the phospholipids and amide I and II proteins, as well as minor chemical changes to the structural polysaccharides and nucleic acids when compared to untreated cells. These changes can be attributed to the physical interaction of the BP nanoflakes with the cell membranes, combined with the oxidative stress induced by the degradation of the BP nanoflakes. This study provides insight into the biochemical interaction of BP nanoflakes with microbial cells, allowing for a better understanding of the antimicrobial mechanism of action that will be important for the next generation of applications such as implant coatings, wound dressings, or medical surfaces.

Silicon-Doped Graphene Oxide Quantum Dots as Efficient Nanoconjugates for Multifunctional Nanocomposites.

Graphene oxide quantum dots (GOQDs) hold great promise as a new class of high-performance carbonaceous nanomaterials due to their numerous functional properties, such as tunable photoluminescence (PL), excellent thermal and chemical stability, and superior biocompatibility. In this study, we developed a facile, one-pot, and effective strategy to engineer the interface of GOQDs through covalent doping with silicon. The successful covalent attachment of the silane dopant with pendant vinyl groups to the edges of the GOQDs was confirmed by an in-depth investigation of the structural and morphological characteristics. The Si-GOQD nanoconjugates had an average dimension of ∼8 nm, with a graphite-structured core and amorphous carbon on their shell. We further used the infrared nanoimaging based on scattering-type scanning near-field optical microscopy to unveil the spectral near-field response of GOQD samples and to measure the nanoscale IR response of its network; we then demonstrated their distinct domains with strongly enhanced near fields. The doping of Si atoms into the sp2-hybridized graphitic framework of GOQDs also led to tailored PL emissions. We then sought to explore the potential applications of Si-GOQDs on the surface of plastic films where poly(dimethylsiloxane) (PDMS) served as a bridge to tightly anchor the Si-GOQDs to the surface. The bi-layered coated films which were built with co-assembly of Si-GOQDs and PDMS contributed to suppressing the transmission of water molecules due to the generation of compact and less accessible passing sites, achieving a nearly twofold reduction in water permeability compared to the single-layered coated films. The nanoindentation and PeakForce quantitative nanomechanical mapping showed that Si-GOQD-coated substrates were softer and more deformable than those coated only with PDMS. The co-assembly of PDMS and Si-GOQDs yielded films that were less stiff than those made from PDMS alone. Our findings provided conceptual insights into the importance of nanoscale surface engineering of GOQDs in conferring excellent dispersibility and enhancing the performance of nanocomposite films.

Highly accurate and label-free discrimination of single cancer cell using a plasmonic oxide-based nanoprobe.

The detection of cancer cells at the single-cell level enables many novel functionalities such as next-generation cancer prognosis and accurate cellular analysis. While surface-enhanced Raman spectroscopy (SERS) has been widely considered as an effective tool in a low-cost and label-free manner, however, it is challenging to discriminate single cancer cells with an accuracy above 90% mainly due to the poor biocompatibility of the noble-metal-based SERS agents. Here, we report a dual-functional nanoprobe based on dopant-driven plasmonic oxides, demonstrating a maximum accuracy above 90% in distinguishing single THP-1 cell from peripheral blood mononuclear cell (PBMC) and human embryonic kidney (HEK) 293 from human macrophage cell line U937 based on their SERS patterns. Furthermore, this nanoprobe can be triggered by the bio-redox response from individual cells towards stimuli, empowering another complementary colorimetric cell detection, approximately achieving the unity discrimination accuracy at a single-cell level. Our strategy could potentially enable the future accurate and low-cost detection of cancer cells from mixed cell samples.

Liquid metal polymer composite: Flexible, conductive, biocompatible, and antimicrobial scaffold.

Gallium and its alloys, such as eutectic gallium indium alloy (EGaIn), a form of liquid metal, have recently attracted the attention of researchers due to their low toxicity and electrical and thermal conductivity for biomedical application. However, further research is required to harness EGaIn-composites advantages and address their application as a biomedical scaffold. In this research, EGaIn-polylactic acid/polycaprolactone composites with and without a second conductive filler, MXene, were prepared and characterized. The addition of MXene, into the EGaIn-composite, can improve the composite's electrochemical properties by connecting the liquid metal droplets resulting in electrically conductive continuous pathways within the polymeric matrix. The results showed that the composite with 50% EGaIn and 4% MXene, displayed optimal electrochemical properties and enhanced mechanical and radiopacity properties. Furthermore, the composite showed good biocompatibility, examined through interactions with fibroblast cells, and antibacterial properties against methicillin-resistant Staphylococcus aureus. Therefore, the liquid metal (EGaIn) polymer composite with MXene provides a first proof-of-concept engineering scaffold strategy with low toxicity, functional electrochemical properties, and promising antimicrobial properties.