RESUMEN
Objective: Human pose estimation models can measure movement from videos at a large scale and low cost; however, open-source pose estimation models typically detect only sparse keypoints, which leads to inaccurate joint kinematics. OpenCap, a freely available service for researchers to measure movement from videos, addresses this issue using a deep learning model-the marker enhancer-that transforms sparse keypoints into dense anatomical markers. However, OpenCap performs poorly on movements not included in the training data. Here, we create a much larger and more diverse training dataset and develop a more accurate and generalizable marker enhancer. Methods: We compiled marker-based motion capture data from 1176 subjects and synthesized 1433 hours of keypoints and anatomical markers to train the marker enhancer. We evaluated its accuracy in computing kinematics using both benchmark movement videos and synthetic data representing unseen, diverse movements. Results: The marker enhancer improved kinematic accuracy on benchmark movements (mean error: 4.1°, max: 8.7°) compared to using video keypoints (mean: 9.6°, max: 43.1°) and OpenCap's original enhancer (mean: 5.3°, max: 11.5°). It also better generalized to unseen, diverse movements (mean: 4.1°, max: 6.7°) than OpenCap's original enhancer (mean: 40.4°, max: 252.0°). Conclusion: Our marker enhancer demonstrates both accuracy and generalizability across diverse movements. Significance: We integrated the marker enhancer into OpenCap, thereby offering its thousands of users more accurate measurements across a broader range of movements.
RESUMEN
Analyzing anatomic shapes of tissues and organs is pivotal for accurate disease diagnostics and clinical decision-making. One prominent disease that depends on anatomic shape analysis is osteoarthritis, which affects 30 million Americans. To advance osteoarthritis diagnostics and prognostics, we introduce ShapeMed-Knee, a 3D shape dataset with 9,376 high-resolution, medical-imaging-based 3D shapes of both femur bone and cartilage. Besides data, ShapeMed-Knee includes two benchmarks for assessing reconstruction accuracy and five clinical prediction tasks that assess the utility of learned shape representations. Leveraging ShapeMed-Knee, we develop and evaluate a novel hybrid explicit-implicit neural shape model which achieves up to 40% better reconstruction accuracy than a statistical shape model and implicit neural shape model. Our hybrid models achieve state-of-the-art performance for preserving cartilage biomarkers; they're also the first models to successfully predict localized structural features of osteoarthritis, outperforming shape models and convolutional neural networks applied to raw magnetic resonance images and segmentations. The ShapeMed-Knee dataset provides medical evaluations to reconstruct multiple anatomic surfaces and embed meaningful disease-specific information. ShapeMed-Knee reduces barriers to applying 3D modeling in medicine, and our benchmarks highlight that advancements in 3D modeling can enhance the diagnosis and risk stratification for complex diseases. The dataset, code, and benchmarks will be made freely accessible.
RESUMEN
Background: Hamstring strain injuries are associated with significant time away from sport and high reinjury rates. Recent evidence suggests that hamstring injuries often occur during accelerative running, but investigations of hamstring mechanics have primarily examined constant speed running on a treadmill. To help fill this gap in knowledge, this study compares hamstring lengths and lengthening velocities between accelerative running and constant speed overground running. Methods: We recorded 2 synchronized videos of 10 participants (5 female, 5 male) during 6 accelerative running trials and 6 constant speed running trials. We used OpenCap (a markerless motion capture system) to estimate body segment kinematics for each trial and a 3-dimensional musculoskeletal model to compute peak length and step-average lengthening velocity of the biceps femoris (long head) muscle-tendon unit. To compare running conditions, we used linear mixed regression models with running speed (normalized by the subject-specific maximum) as the independent variable. Results: At running speeds below 75% of top speed accelerative running resulted in greater peak lengths than constant speed running. For example, the peak hamstring muscle-tendon length when a person accelerated from running at only 50% of top speed was equivalent to running at a constant 88% of top speed. Lengthening velocities were greater during accelerative running at all running speeds. Differences in hip flexion kinematics primarily drove the greater peak muscle-tendon lengths and lengthening velocities observed in accelerative running. Conclusion: Hamstrings are subjected to longer muscle-tendon lengths and faster lengthening velocities in accelerative running compared to constant speed running. This provides a biomechanical explanation for the observation that hamstring strain injuries often occur during acceleration. Our results suggest coaches who monitor exposure to high-risk circumstances (long lengths, fast lengthening velocities) should consider the accelerative nature of running in addition to running speed.
RESUMEN
Exoskeletons are a burgeoning technology with many possible applications to improve human life; focusing the effort of exoskeleton research and development on the most important features is essential for facilitating adoption and maximizing positive societal impact. To identify important focus areas for exoskeleton research and development, we conducted a survey with 154 potential users (older adults) and another survey with 152 clinicians. The surveys were conducted online and to ensure a consistent concept of an exoskeleton across respondents, an image of a hip exoskeleton was shown during exoskeleton-related prompts. The survey responses indicate that both older adults and clinicians are open to using exoskeletons, fall prevention and joint pain reduction are especially important features, and users are likely to wear an exoskeleton in the scenarios when it has the greatest opportunity to help prevent a fall. These findings can help inform future exoskeleton research and guide the development of devices that are accepted, used, and provide meaningful benefit to users.
Asunto(s)
Dispositivo Exoesqueleto , Humanos , Anciano , Caminata/fisiología , Accidentes por Caídas/prevención & control , Extremidad Inferior/fisiologíaRESUMEN
Muscle-driven simulations have provided valuable insights in studies of walking and running, but a set of freely available simulations and corresponding experimental data for cycling do not exist. The aim of this work was to develop a set of muscle-driven simulations of cycling and to validate them by comparison with experimental data. We used direct collocation to generate simulations of 16 participants cycling over a range of powers (40-216 W) and cadences (75-99 RPM) using two optimization objectives: a baseline objective that minimized muscle effort and a second objective that additionally minimized tibiofemoral joint forces. We tested the accuracy of the simulations by comparing the timing of active muscle forces in our baseline simulation to timing in experimental electromyography data. Adding a term in the objective function to minimize tibiofemoral forces preserved cycling power and kinematics, improved similarity between active muscle force timing and experimental electromyography, and decreased tibiofemoral joint reaction forces, which better matched previously reported in vivo measurements. The musculoskeletal models, muscle-driven simulations, simulation software, and experimental data are freely shared at https://simtk.org/projects/cycling_sim for others to reproduce these results and build upon this research.
Asunto(s)
Músculo Esquelético , Caminata , Humanos , Músculo Esquelético/fisiología , Caminata/fisiología , Electromiografía , Articulación de la Rodilla/fisiología , Fenómenos Mecánicos , Fenómenos Biomecánicos , Modelos BiológicosRESUMEN
Creating large-scale public datasets of human motion biomechanics could unlock data-driven breakthroughs in our understanding of human motion, neuromuscular diseases, and assistive devices. However, the manual effort currently required to process motion capture data and quantify the kinematics and dynamics of movement is costly and limits the collection and sharing of large-scale biomechanical datasets. We present a method, called AddBiomechanics, to automate and standardize the quantification of human movement dynamics from motion capture data. We use linear methods followed by a non-convex bilevel optimization to scale the body segments of a musculoskeletal model, register the locations of optical markers placed on an experimental subject to the markers on a musculoskeletal model, and compute body segment kinematics given trajectories of experimental markers during a motion. We then apply a linear method followed by another non-convex optimization to find body segment masses and fine tune kinematics to minimize residual forces given corresponding trajectories of ground reaction forces. The optimization approach requires approximately 3-5 minutes to determine a subject's skeleton dimensions and motion kinematics, and less than 30 minutes of computation to also determine dynamically consistent skeleton inertia properties and fine-tuned kinematics and kinetics, compared with about one day of manual work for a human expert. We used AddBiomechanics to automatically reconstruct joint angle and torque trajectories from previously published multi-activity datasets, achieving close correspondence to expert-calculated values, marker root-mean-square errors less than 2 cm, and residual force magnitudes smaller than 2% of peak external force. Finally, we confirmed that AddBiomechanics accurately reproduced joint kinematics and kinetics from synthetic walking data with low marker error and residual loads. We have published the algorithm as an open source cloud service at AddBiomechanics.org, which is available at no cost and asks that users agree to share processed and de-identified data with the community. As of this writing, hundreds of researchers have used the prototype tool to process and share about ten thousand motion files from about one thousand experimental subjects. Reducing the barriers to processing and sharing high-quality human motion biomechanics data will enable more people to use state-of-the-art biomechanical analysis, do so at lower cost, and share larger and more accurate datasets.
Asunto(s)
Modelos Biológicos , Sistema Musculoesquelético , Humanos , Fenómenos Biomecánicos , Caminata , Movimiento (Física)RESUMEN
Measures of human movement dynamics can predict outcomes like injury risk or musculoskeletal disease progression. However, these measures are rarely quantified in large-scale research studies or clinical practice due to the prohibitive cost, time, and expertise required. Here we present and validate OpenCap, an open-source platform for computing both the kinematics (i.e., motion) and dynamics (i.e., forces) of human movement using videos captured from two or more smartphones. OpenCap leverages pose estimation algorithms to identify body landmarks from videos; deep learning and biomechanical models to estimate three-dimensional kinematics; and physics-based simulations to estimate muscle activations and musculoskeletal dynamics. OpenCap's web application enables users to collect synchronous videos and visualize movement data that is automatically processed in the cloud, thereby eliminating the need for specialized hardware, software, and expertise. We show that OpenCap accurately predicts dynamic measures, like muscle activations, joint loads, and joint moments, which can be used to screen for disease risk, evaluate intervention efficacy, assess between-group movement differences, and inform rehabilitation decisions. Additionally, we demonstrate OpenCap's practical utility through a 100-subject field study, where a clinician using OpenCap estimated musculoskeletal dynamics 25 times faster than a laboratory-based approach at less than 1% of the cost. By democratizing access to human movement analysis, OpenCap can accelerate the incorporation of biomechanical metrics into large-scale research studies, clinical trials, and clinical practice.
Asunto(s)
Modelos Biológicos , Teléfono Inteligente , Humanos , Músculos/fisiología , Programas Informáticos , Fenómenos Biomecánicos , Movimiento/fisiologíaRESUMEN
Connecting the legs with a spring attached to the shoelaces, called an exotendon, can reduce the energetic cost of running, but how the exotendon reduces the energetic burden of individual muscles remains unknown. We generated muscle-driven simulations of seven individuals running with and without the exotendon to discern whether savings occurred during the stance phase or the swing phase, and to identify which muscles contributed to energy savings. We computed differences in muscle-level energy consumption, muscle activations, and changes in muscle-fiber velocity and force between running with and without the exotendon. The seven of nine participants who reduced energy cost when running with the exotendon reduced their measured energy expenditure rate by 0.9 W/kg (8.3%). Simulations predicted a 1.4 W/kg (12.0%) reduction in the average rate of energy expenditure and correctly identified that the exotendon reduced rates of energy expenditure for all seven individuals. Simulations showed most of the savings occurred during stance (1.5 W/kg), though the rate of energy expenditure was also reduced during swing (0.3 W/kg). The energetic savings were distributed across the quadriceps, hip flexor, hip abductor, hamstring, hip adductor, and hip extensor muscle groups, whereas no changes were observed in the plantarflexor or dorsiflexor muscles. Energetic savings were facilitated by reductions in the rate of mechanical work performed by muscles and their estimated rate of heat production. By modeling muscle-level energetics, this simulation framework accurately captured measured changes in whole-body energetics when using an assistive device. This is a useful first step towards using simulation to accelerate device design by predicting how humans will interact with assistive devices that have yet to be built.
RESUMEN
The Executive Council of the International Society of Biomechanics has initiated and overseen the commemorations of the Society's 50th Anniversary in 2023. This included multiple series of lectures at the ninth World Congress of Biomechanics in 2022 and XXIXth Congress of the International Society of Biomechanics in 2023, all linked to special issues of International Society of Biomechanics' affiliated journals. This special issue of the Journal of Applied Biomechanics is dedicated to the biomechanics of the neuromusculoskeletal system. The reader is encouraged to explore this special issue which comprises 6 papers exploring the current state-of the-art, and future directions and roles for neuromusculoskeletal biomechanics. This editorial presents a very brief history of the science of the neuromusculoskeletal system's 4 main components: the central nervous system, musculotendon units, the musculoskeletal system, and joints, and how they biomechanically integrate to enable an understanding of the generation and control of human movement. This also entails a quick exploration of contemporary neuromusculoskeletal biomechanics and its future with new fields of application.
RESUMEN
Walking balance is central to independent mobility, and falls due to loss of balance are a leading cause of death for people 65 years of age and older. Bipedal gait is typically unstable, but healthy humans use corrective torques to counteract perturbations and stabilize gait. Exoskeleton assistance could benefit people with neuromuscular deficits by providing stabilizing torques at lower-limb joints to replace lost muscle strength and sensorimotor control. However, it is unclear how applied exoskeleton torques translate to changes in walking kinematics. This study used musculoskeletal simulation to investigate how exoskeleton torques applied to the ankle and subtalar joints alter center of mass kinematics during walking. We first created muscle-driven walking simulations using OpenSim Moco by tracking experimental kinematics and ground reaction forces recorded from five healthy adults. We then used forward integration to simulate the effect of exoskeleton torques applied to the ankle and subtalar joints while keeping muscle excitations fixed based on our previous tracking simulation results. Exoskeleton torque lasted for 15% of the gait cycle and was applied between foot-flat and toe-off during the stance phase, and changes in center of mass kinematics were recorded when the torque application ended. We found that changes in center of mass kinematics were dependent on both the type and timing of exoskeleton torques. Plantarflexion torques produced upward and backward changes in velocity of the center of mass in mid-stance and upward and smaller forward velocity changes near toe-off. Eversion and inversion torques primarily produced lateral and medial changes in velocity in mid-stance, respectively. Intrinsic muscle properties reduced kinematic changes from exoskeleton torques. Our results provide mappings between ankle plantarflexion and inversion-eversion torques and changes in center of mass kinematics which can inform designers building exoskeletons aimed at stabilizing balance during walking. Our simulations and software are freely available and allow researchers to explore the effects of applied torques on balance and gait.
Asunto(s)
Tobillo , Dispositivo Exoesqueleto , Adulto , Humanos , Torque , Fenómenos Biomecánicos/fisiología , Caminata/fisiología , Marcha/fisiologíaRESUMEN
Creating large-scale public datasets of human motion biomechanics could unlock data-driven breakthroughs in our understanding of human motion, neuromuscular diseases, and assistive devices. However, the manual effort currently required to process motion capture data and quantify the kinematics and dynamics of movement is costly and limits the collection and sharing of large-scale biomechanical datasets. We present a method, called AddBiomechanics, to automate and standardize the quantification of human movement dynamics from motion capture data. We use linear methods followed by a non-convex bilevel optimization to scale the body segments of a musculoskeletal model, register the locations of optical markers placed on an experimental subject to the markers on a musculoskeletal model, and compute body segment kinematics given trajectories of experimental markers during a motion. We then apply a linear method followed by another non-convex optimization to find body segment masses and fine tune kinematics to minimize residual forces given corresponding trajectories of ground reaction forces. The optimization approach requires approximately 3-5 minutes to determine a subjects skeleton dimensions and motion kinematics, and less than 30 minutes of computation to also determine dynamically consistent skeleton inertia properties and fine-tuned kinematics and kinetics, compared with about one day of manual work for a human expert. We used AddBiomechanics to automatically reconstruct joint angle and torque trajectories from previously published multi-activity datasets, achieving close correspondence to expert-calculated values, marker root-mean-square errors less than 2cm, and residual force magnitudes smaller than 2% of peak external force. Finally, we confirmed that AddBiomechanics accurately reproduced joint kinematics and kinetics from synthetic walking data with low marker error and residual loads. We have published the algorithm as an open source cloud service at AddBiomechanics.org, which is available at no cost and asks that users agree to share processed and de-identified data with the community. As of this writing, hundreds of researchers have used the prototype tool to process and share about ten thousand motion files from about one thousand experimental subjects. Reducing the barriers to processing and sharing high-quality human motion biomechanics data will enable more people to use state-of-the-art biomechanical analysis, do so at lower cost, and share larger and more accurate datasets.
RESUMEN
Over the past half-century, musculoskeletal simulations have deepened our knowledge of human and animal movement. This article outlines ten steps to becoming a musculoskeletal simulation expert so you can contribute to the next half-century of technical innovation and scientific discovery. We advocate looking to the past, present, and future to harness the power of simulations that seek to understand and improve mobility. Instead of presenting a comprehensive literature review, we articulate a set of ideas intended to help researchers use simulations effectively and responsibly by understanding the work on which today's musculoskeletal simulations are built, following established modeling and simulation principles, and branching out in new directions.
Asunto(s)
Movimiento , Animales , Humanos , Simulación por ComputadorRESUMEN
Connecting the legs with a spring attached to the shoelaces reduces the energy cost of running, but how the spring reduces the energy burden of individual muscles remains unknown. We generated muscle-driven simulations of seven individuals running with and without the spring to discern whether savings occurred during the stance phase or the swing phase, and to identify which muscles contributed to energy savings. We computed differences in muscle-level energy consumption, muscle activations, and changes in muscle-fiber velocity and force between running with and without the spring. Across participants, running with the spring reduced the measured rate of energy expenditure by 0.9 W/kg (8.3%). Simulations predicted a 1.4 W/kg (12.0%) reduction in the average rate of energy expenditure and correctly identified that the spring reduced rates of energy expenditure for all participants. Simulations showed most of the savings occurred during stance (1.5 W/kg), though the rate of energy expenditure was also reduced during swing (0.3 W/kg). The energetic savings were distributed across the quadriceps, hip flexor, hip abductor, hamstring, hip adductor, and hip extensor muscle groups, whereas no changes in the rate of energy expenditure were observed in the plantarflexor or dorsiflexor muscles. Energetic savings were facilitated by reductions in the rate of mechanical work performed by muscles and their estimated rate of heat production. The simulations provide insight into muscle-level changes that occur when utilizing an assistive device and the mechanisms by which a spring connecting the legs improves running economy.
RESUMEN
Medial knee contact force (MCF) is related to the pathomechanics of medial knee osteoarthritis. However, MCF cannot be directly measured in the native knee, making it difficult for therapeutic gait modifications to target this metric. Static optimization, a musculoskeletal simulation technique, can estimate MCF, but there has been little work validating its ability to detect changes in MCF induced by gait modifications. In this study, we quantified the error in MCF estimates from static optimization compared to measurements from instrumented knee replacements during normal walking and seven different gait modifications. We then identified minimum magnitudes of simulated MCF changes for which static optimization correctly identified the direction of change (i.e., whether MCF increased or decreased) at least 70% of the time. A full-body musculoskeletal model with a multi-compartment knee and static optimization was used to estimate MCF. Simulations were evaluated using experimental data from three subjects with instrumented knee replacements who walked with various gait modifications for a total of 115 steps. Static optimization underpredicted the first peak (mean absolute error = 0.16 bodyweights) and overpredicted the second peak (mean absolute error = 0.31 bodyweights) of MCF. Average root mean square error in MCF over stance phase was 0.32 bodyweights. Static optimization detected the direction of change with at least 70% accuracy for early-stance reductions, late-stance reductions, and early-stance increases in peak MCF of at least 0.10 bodyweights. These results suggest that a static optimization approach accurately detects the direction of change in early-stance medial knee loading, potentially making it a valuable tool for evaluating the biomechanical efficacy of gait modifications for knee osteoarthritis.
Asunto(s)
Marcha , Articulación de la Rodilla , Osteoartritis de la Rodilla , Osteoartritis de la Rodilla/fisiopatología , Articulación de la Rodilla/fisiopatología , Caminata , Artroplastia de Reemplazo de Rodilla , Humanos , Masculino , Femenino , Simulación por ComputadorRESUMEN
Anterior cruciate ligament (ACL) injury and ACL reconstruction (ACLR) surgery are common. Laboratory-based biomechanical assessment can evaluate ACL injury risk and rehabilitation progress after ACLR; however, lab-based measurements are expensive and inaccessible to most people. Portable sensors such as wearables and cameras can be deployed during sporting activities, in clinics, and in patient homes. Although many portable sensing approaches have demonstrated promising results during various assessments related to ACL injury, they have not yet been widely adopted as tools for out-of-lab assessment. The purpose of this review is to summarize research on out-of-lab portable sensing applied to ACL and ACLR and offer our perspectives on new opportunities for future research and development. We identified 49 original research articles on out-of-lab ACL-related assessment; the most common sensing modalities were inertial measurement units, depth cameras, and RGB cameras. The studies combined portable sensors with direct feature extraction, physics-based modeling, or machine learning to estimate a range of biomechanical parameters (e.g., knee kinematics and kinetics) during jump-landing tasks, cutting, squats, and gait. Many of the reviewed studies depict proof-of-concept methods for potential future clinical applications including ACL injury risk screening, injury prevention training, and rehabilitation assessment. By synthesizing these results, we describe important opportunities that exist for clinical validation of existing approaches, using sophisticated modeling techniques, standardization of data collection, and creation of large benchmark datasets. If successful, these advances will enable widespread use of portable-sensing approaches to identify ACL injury risk factors, mitigate high-risk movements prior to injury, and optimize rehabilitation paradigms.
RESUMEN
Physical function decline due to aging or disease can be assessed with quantitative motion analysis, but this currently requires expensive laboratory equipment. We introduce a self-guided quantitative motion analysis of the widely used five-repetition sit-to-stand test using a smartphone. Across 35 US states, 405 participants recorded a video performing the test in their homes. We found that the quantitative movement parameters extracted from the smartphone videos were related to a diagnosis of osteoarthritis, physical and mental health, body mass index, age, and ethnicity and race. Our findings demonstrate that at-home movement analysis goes beyond established clinical metrics to provide objective and inexpensive digital outcome metrics for nationwide studies.
RESUMEN
The purpose of this study was to determine the effects of botulinum neurotoxin type A (BoNT-A) on vastus lateralis:vastus medialis (VL:VM) muscle balance, patellar tracking, and pain in patients with chronic patellofemoral (PF) pain. We recruited 13 participants (9 females, 4 males) with recalcitrant PF pain who underwent ultrasound-guided BoNT-A injections into the distal third of the VL muscle, followed by a 6-week home exercise program to strengthen their VM muscle. We imaged the participants in a C-arm computed tomography (CT) scanner before and after the intervention. We calculated VL:VM ratios from CT images from a supine, nonweight-bearing condition. We obtained patellar tilt and bisect offset values from CT images from an upright, weight-bearing condition. We recorded functional pain scores before, immediately after, and 2-4 years after the intervention. We classified the participants into normal tracking and maltracking groups based on their patellar tilt and bisect offset values. BoNT-A with home exercise reduced VL:VM ratio (18%; p < 0.001), patellar tilt (19%; p = 0.020), and bisect offset (5%; p = 0.025). Four participants classified as maltrackers before the intervention transitioned to normal tracking after the intervention. Functional pain scores improved immediately after the intervention (13%, p < 0.001) and remained improved at 2-year follow-up (12%, p = 0.011). Statement of Clinical Significance: This study provides new evidence in support of BoNT-A for treatment of PF pain. Classification of patients under weight-bearing conditions may identify individuals who will most benefit from a BoNT-A treatment.
Asunto(s)
Toxinas Botulínicas Tipo A , Dolor Crónico , Síndrome de Dolor Patelofemoral , Masculino , Femenino , Humanos , Toxinas Botulínicas Tipo A/uso terapéutico , Síndrome de Dolor Patelofemoral/terapia , Rótula , Músculo Cuádriceps , Dolor Crónico/tratamiento farmacológicoRESUMEN
Health behaviors are inextricably linked to health and well-being, yet issues such as physical inactivity and insufficient sleep remain significant global public health problems. Mobile technology-and the unprecedented scope and quantity of data it generates-has a promising but largely untapped potential to promote health behaviors at the individual and population levels. This perspective article provides multidisciplinary recommendations on the design and use of mobile technology, and the concomitant wealth of data, to promote behaviors that support overall health. Using physical activity as anexemplar health behavior, we review emerging strategies for health behavior change interventions. We describe progress on personalizing interventions to an individual and their social, cultural, and built environments, as well as on evaluating relationships between mobile technology data and health to establish evidence-based guidelines. In reviewing these strategies and highlighting directions for future research, we advance the use of theory-based, personalized, and human-centered approaches in promoting health behaviors.
Asunto(s)
Promoción de la Salud , Salud Pública , Humanos , Conductas Relacionadas con la Salud , Ejercicio Físico , TecnologíaRESUMEN
BACKGROUND: Spina bifida, a neurological defect, can result in lower-limb muscle weakness. Altered ambulation and reduced musculoskeletal loading can yield decreased bone strength in individuals with spina bifida, yet individuals who remain ambulatory can exhibit normal bone outcomes. RESEARCH QUESTION: During walking, how do lower-limb joint kinematics and moments and tibial forces in independently ambulatory children with spina bifida differ from those of children with typical development? METHODS: We retrospectively analyzed data from 16 independently ambulatory children with spina bifida and 16 children with typical development and confirmed that tibial bone strength was similar between the two groups. Plantar flexor muscle strength was measured by manual muscle testing, and 14 of the children with spina bifida wore activity monitors for an average of 5 days. We estimated tibial forces at the knee and ankle using motion capture data and musculoskeletal simulations. We used Statistical Parametric Mapping t-tests to compare lower-limb joint kinematic and kinetic waveforms between the groups with spina bifida and typical development. Within the group with spina bifida, we examined relationships between plantar flexor muscle strength and peak tibial forces by calculating Spearman correlations. RESULTS: Activity monitors from the children with spina bifida reported typical daily steps (9656 [SD 3095]). Despite slower walking speeds (p = 0.004) and altered lower-body kinematics (p < 0.001), children with spina bifida had knee and ankle joint moments and forces similar to those of children with typical development, with no detectable differences during stance. Plantar flexor muscle weakness was associated with increased compressive knee force (p = 0.002) and shear ankle force (p = 0.009). SIGNIFICANCE: High-functioning, independently ambulatory children with spina bifida exhibited near-typical tibial bone strength and near-typical step counts and tibial load magnitudes. Our results suggest that the tibial forces in this group are of sufficient magnitudes to support the development of normal tibial bone strength.