Ultrafast laser state active controlling based on anisotropic quasi-1D material.

Laser state active controlling is challenging under the influence of inherent loss and other nonlinear effects in ultrafast systems. Seeking an extension of degree of freedom in optical devices based on low-dimensional materials may be a way forward. Herein, the anisotropic quasi-one-dimensional layered material Ta2PdS6 was utilized as a saturable absorber to modulate the nonlinear parameters effectively in an ultrafast system by polarization-dependent absorption. The polarization-sensitive nonlinear optical response facilitates the Ta2PdS6-based mode-lock laser to sustain two types of laser states, i.e., conventional soliton and noise-like pulse. The laser state was switchable in the single fiber laser with a mechanism revealed by numerical simulation. Digital coding was further demonstrated in this platform by employing the laser as a codable light source. This work proposed an approach for ultrafast laser state active controlling with low-dimensional material, which offers a new avenue for constructing tunable on-fiber devices.

Magnetic Topological Insulator MnBi2Te4 Nanosheets for Femtosecond Pulse Generation.

The van der Waals layered material MnBi2Te4, as a magnetic topological insulator, has attracted tremendous interest for novel physics research in the fields of condensed matter physics and materials science. However, the nonlinear optical properties of MnBi2Te4 and its applications in ultrafast optics have rarely been explored. In this study, high-quality MnBi2Te4 nanosheets have been successfully synthesized by the self-flux method. The morphology, chemical composition, magnetic properties, and nonlinear optical characteristics were systematically investigated. The magnetic transition of MnBi2Te4 was confirmed by a low-temperature spatially resolved spectroscopic technique. The saturable absorption property of MnBi2Te4 was measured by a balanced twin-detector system with a modulation depth of 4.5% and a saturation optical intensity of 2.35 GW/cm2. Furthermore, by inserting the MnBi2Te4-based saturable absorber, a soliton mode-locking laser operating at 1558.8 nm was obtained with a pulse duration of 331 fs. This research will pave the way for applications of the magnetic TI MnBi2Te4 in nonlinear optics and photonics.

Quasi-2D Mn3Si2Te6 Nanosheet for Ultrafast Photonics.

The magnetic nanomaterial Mn3Si2Te6 is a promising option for spin-dependent electronic and magneto-optoelectronic devices. However, its application in nonlinear optics remains fanciful. Here, we demonstrate a pulsed Er-doped fiber laser (EDFL) based on a novel quasi-2D Mn3Si2Te6 saturable absorber (SA) with low pump power at 1.5 µm. The high-quality Mn3Si2Te6 crystals were synthesized by the self-flux method, and the ultrathin Mn3Si2Te6 nanoflakes were prepared by a simple mechanical exfoliation procedure. To the best of our knowledge, this is the first time laser pulses have been generated using quasi-2D Mn3Si2Te6. A stable pulsed laser at 1562 nm with a low threshold pump power of 60 mW was produced by integrating the Mn3Si2Te6 SA into an EDFL cavity. The maximum power of the output pulse is 783 µW. The repetition rate can vary from 24.16 to 44.44 kHz, with corresponding pulse durations of 5.64 to 3.41 µs. Our results indicate that the quasi-2D Mn3Si2Te6 is a promising material for application in ultrafast photonics.

Bimetallic Alloys b-AsxP1-x at High Concentration Differences: Ideal for Photonic Devices.

Black arsenic phosphorus (b-AsxP1-x) is expected to be one of the primary materials for future photonic devices. However, the x-factor is randomly estimated and applied in photonic devices in current studies, rather than systematically analyzing it for a comprehensive understanding. Herein, AsxP1-x switches from a direct band gap semiconductor to an indirect band gap one at x = 0.75. AsxP1-x at x ≤ 0.25 is capable of broadband absorption, while b-AsxP1-x at x ≥ 0.75 can only absorb at specific wavelengths in the perspective of the electron energy transition. Additionally, the optoelectronic response of the integral field-effect transistor configurations constructed with b-AsxP1-x is investigated systematically as a photodetector device. The photonic response characteristics show high polarization sensitivity at x ≥ 0.75, but a typical circuit system signal at x ≤ 0.25. These results suggest that b-AsxP1-x with high concentration differences is a perfect candidate for photonic material.

Synthesis of Hexagonal Structured GaS Nanosheets for Robust Femtosecond Pulse Generation.

Gallium sulfide (GaS), with a hexagonal structure, has received extensive attention due to its graphene-like structure and derived optical properties. Here, high-quality GaS was obtained via chemical vapor synthesis and then prepared as a saturable absorber by the stamp-assisted localization-transfer technique onto fiber end face. The stability of the material and the laser damage threshold are maintained due to the optimized thickness and the cavity integration form. The potential of the GaS for nonlinear optics is explored by constructing a GaS-based Erbium-doped mode-locked fiber laser. Stable femtosecond (~448 fs) mode-locking operation of the single pulse train is achieved, and the robust mode-locked operation (>30 days) was recorded. Experimental results show the potential of GaS for multi-functional ultrafast high-power lasers and promote continuous research on graphene-like materials in nonlinear optics and photonics.

Controllable Synthesis of Narrow-Gap van der Waals Semiconductor Nb2GeTe4 with Asymmetric Architecture for Ultrafast Photonics.

Ultrafast photonics has become an interdisciplinary topic of great consequence due to the spectacular progress of compact and efficient ultrafast pulse generation. Wide spectrum bandwidth is the key element for ultrafast pulse generation due to the Fourier transform limitation. Herein, monoclinic Nb2GeTe4, an emerging class of ternary narrow-gap semiconductors, was used as a real saturable absorber (SA), which manifests superior wide-range optical absorption. The crystallization form and growth mechanism of Nb2GeTe4 were revealed by a thermodynamic phase diagram. Furthermore, the Nb2GeTe4-SA showed reliable saturation intensity and larger modulation depth, ascribed to a built-in electric field driven by the asymmetric crystal architecture confirmed via X-ray diffraction, polarized Raman spectra, and scanning transmission electron microscopy. Based on the Nb2GeTe4-SA, femtosecond mode-locked operation with good overall performance was achieved by a properly designed ring cavity. These results suggest that Nb2GeTe4 shows great promise for ultrafast photonic applications and arouse interests in exploring the intriguing properties of the ternary van der Waals material family.

Femtosecond ultrafast pulse generation with high-quality 2H-TaS2 nanosheets via top-down empirical approach.

Tantalum disulfide (TaS2), an emerging group VB transition metal dichalcogenide, with unique layered structure, rich phase diagrams, metallic behavior, higher carrier concentration and mobility is emerging as a prototype for revealing basic physical phenomena and developing practical applications. However, its photonics properties and even engineering-related processes are still rare. Here, the top-down experiment demonstration, including synthesis, thickness optimization and nonlinear optical application, has been reported. In addition, the ultrafast (∼373 fs) erbium-doped fiber pulse with a small time-bandwidth product (∼0.34) and long-term stability (∼25 days) was realized using the nonlinear absorption properties of the high-quality 2H-TaS2 nanosheet. These results suggest an experimental route for further ultrafast photonics exploration based on metallic transition metal dichalcogenides.

Black phosphorus for near-infrared ultrafast lasers in the spatial/temporal domain.

Two-dimensional (2D) materials have attracted extensive interests due to their wide range of electronic and optical properties. After continuous and extensive research, black phosphorus (BP), a novel member of 2D layered semiconductor material, benefit for the unique in-plane anisotropic structure, controllable direct bandgap characteristic, and high charge carrier mobility, has attracted tremendous attention and successfully applied in ultrafast pulse generation. This article, which focuses on near-infrared ultrafast laser demonstration of BP, present discussion of preparation methods for high quality BP nanosheet, various BP based ultrafast lasers in the spatial/temporal domain, and the future research needs.

Facile Multicomponent Polymerizations toward Unconventional Luminescent Polymers with Readily Openable Small Heterocycles.

Heterocyclic polymers have gained enormous attention for their unique functionalities and wide applications. In contrast with the well-studied polymer systems with five- or six-membered heterocycles, functional polymers with readily openable small-ring heterocycles have rarely been explored due to their large synthetic difficulty. Herein, a facile one-pot multicomponent polymerization to such polymers is developed. A series of functional polymers with multisubstituted and heteroatom-rich azetidine frameworks are efficiently generated at room temperature in high atom economy from handy monomers. The four-membered azetidine rings in the polymer skeletons can be easily transformed into amide and amidine moieties via a fast and efficient acid-mediated ring-opening reaction, producing brand-new polymeric materials with distinctive properties. All the as-prepared azetidine-containing polymers exhibit intrinsic visible luminescence in the solid state under long-wavelength UV irradiation even without conventionally conjugated structures. Such unconventional luminescence is attributed to the clusteroluminogens formed by through-space electronic interactions of heteroatoms and phenyl rings. All the obtained polymers show excellent optical transparency, high and tunable refractive indices, low optical dispersions and good photopatternability, which make them promising materials in various advanced electronic and optoelectronic devices. The ring-opened polymers can also function as a lysosome-specific fluorescent probe in biological imaging.

Metal-Free Poly-Cycloaddition of Activated Azide and Alkynes toward Multifunctional Polytriazoles: Aggregation-Induced Emission, Explosive Detection, Fluorescent Patterning, and Light Refraction.

The metal-free click polymerization (MFCP) of activated alkynes and azides or activated azide and alkynes have been developed into powerful techniques for the construction of polytriazoles without the obsession of metallic catalyst residues problem. However, the MFCP of activated azides and alkynes is rarely applied in preparation of functional polytriazoles. In this paper, soluble multifunctional polytriazoles (PIa and PIb) with high weight-average molecular weights (Mw up to 32 000) are prepared via the developed metal-free poly-cycloaddition of activated azide and alkynes in high yields (up to 90%). The resultant PIa and PIb are thermally stable, and show aggregation-induced emission characteristics, enabling their aggregates to detect explosives with superamplification effect. Moreover, thanks to their containing aromatic rings and polar moieties, PIa and PIb exhibit high refractive indices. In addition, they can also be cross-linked upon UV irradiation to generate 2D fluorescent patterning due to their remaining azide groups and containing ester groups. Thus, these multifunctional polytriazoles are potentially applicable in the optoelectronic and sensing fields.

AIE-active theranostic system: selective staining and killing of cancer cells.

Cancer is the leading cause of death worldwide. With the advantages of low cost, high sensitivity and ease of accessibility, fluorescence imaging has been widely used for cancer detection in the scientific field. Aggregation-induced emission luminogens (AIEgens) are a class of synthesized fluorescent probes with high brightness and photostability in the aggregate state. Herein, a new positively-charged AIEgen, abbreviated as TPE-IQ-2O, is designed and characterized. TPE-IQ-2O not only can distinguish cancer cells from normal cells with high contrast with the aid of the difference in mitochondrial membrane potential as well as the quantity of mitochondria, but it also works as a promising photosensitizer to kill cancer cells through generation of reactive oxygen species upon white light irradiation, thus making it a promising AIE theranostic system.

An AIE-based bioprobe for differentiating the early and late stages of apoptosis mediated by H2O2.

A bioprobe, TPE-Zn2BDPA, with aggregation-induced emission characteristics was designed and synthesized to differentiate the early and late stages of apoptosis mediated by H2O2. TPE-Zn2BDPA does not respond to healthy cells, but it selectively lights up the membrane of apopotic cells in both stages with brighter fluorescence in the late apoptotic stage.

A Luminogen with Aggregation-Induced Emission Characteristics for Wash-Free Bacterial Imaging, High-Throughput Antibiotics Screening and Bacterial Susceptibility Evaluation.

A luminogen with aggregation-induced emission characteristics is reported for bacterial imaging and antibiotics screening studies. The luminogen can light up bacteria in a wash-free manner, which simplifies the imaging process and increases its accuracy in bacterial detection. It can also be applied to high-throughput screening of antibiotics and fast evaluation of bacterial susceptibility, giving reliable results in less than 5 h.

A dual functional AEE fluorogen as a mitochondrial-specific bioprobe and an effective photosensitizer for photodynamic therapy.

We report a dual functional aggregation-enhanced emission (AEE) molecule, TPE-IQ, which could target and illuminate mitochondria in both live and fixed cells with superb selectivity and high signal-to-noise ratio. More intriguingly, TPE-IQ can serve as a photosensitizer to generate reactive oxygen species (ROS) in the mitochondria region to induce cell apoptosis.

Efficient polymerization of azide and active internal alkynes.

The 1,3-dipolar cycloaddition of azides and active internal alkynes has been well studied, but is rarely utilized as a tool for polymer preparation. In this work, an efficient polymerization route is developed. Polycycloaddition of diazide (4) and bis(benzoylethynyl)-benzenes and -butane (3) at elevated temperature has produced the first examples of soluble 1,4,5-trisubstituted polytriazoles PI with satisfactory molecular weights (M(w) up to 16 400) in excellent yields (up to 98.6%). All the obtained polymers are thermally stable, losing merely 5% of their weights at temperatures higher than 367 °C. They exhibit higher refractive indices than some commercial plastics and can be crosslinked upon UV irradiation to generate a 3D photopattern with high resolution. The metal-free feature of such a methodology offers a facile tool to prepare functional materials free from the contamination of metal species.