RESUMEN
With the rise of new DNA part libraries and technologies for assembling DNA, synthetic biologists are increasingly constructing and screening combinatorial libraries to optimize their biological designs. As combinatorial libraries are used to generate data on design performance, new rules for composing biological designs will emerge. Most formal frameworks for combinatorial design, however, do not yet support formal comparison of design composition, which is needed to facilitate automated analysis and machine learning in massive biological design spaces. To address this need, we introduce a combinatorial design framework called GOLDBAR. Compared with existing frameworks, GOLDBAR enables synthetic biologists to intersect and merge the rules for entire classes of biological designs to extract common design motifs and infer new ones. Here, we demonstrate the application of GOLDBAR to refine/validate design spaces for TetR-homologue transcriptional logic circuits, verify the assembly of a partial nif gene cluster, and infer novel gene clusters for the biosynthesis of rebeccamycin. We also discuss how GOLDBAR could be used to facilitate grammar-based machine learning in synthetic biology.
RESUMEN
Droplet microfluidics enables kHz screening of picoliter samples at a fraction of the cost of other high-throughput approaches. However, generating stable droplets with desired characteristics typically requires labor-intensive empirical optimization of device designs and flow conditions that limit adoption to specialist labs. Here, we compile a comprehensive droplet dataset and use it to train machine learning models capable of accurately predicting device geometries and flow conditions required to generate stable aqueous-in-oil and oil-in-aqueous single and double emulsions from 15 to 250 µm at rates up to 12000 Hz for different fluids commonly used in life sciences. Blind predictions by our models for as-yet-unseen fluids, geometries, and device materials yield accurate results, establishing their generalizability. Finally, we generate an easy-to-use design automation tool that yield droplets within 3 µm (<8%) of the desired diameter, facilitating tailored droplet-based platforms and accelerating their utility in life sciences.
Asunto(s)
Disciplinas de las Ciencias Biológicas , Microfluídica , Microfluídica/métodos , Emulsiones , Automatización , Aprendizaje AutomáticoRESUMEN
Information is the cornerstone of research, from experimental (meta)data and computational processes to complex inventories of reagents and equipment. These 10 simple rules discuss best practices for leveraging laboratory information management systems to transform this large information load into useful scientific findings.
RESUMEN
Droplet generation is a fundamental component of droplet microfluidics, compartmentalizing biological or chemical systems within a water-in-oil emulsion. As adoption of droplet microfluidics expands beyond expert labs or integrated devices, quality metrics are needed to contextualize the performance capabilities, improving the reproducibility and efficiency of operation. Here, we present two quality metrics for droplet generation: performance versatility, the operating range of a single device, and stability, the distance of a single operating point from a regime change. Both metrics were characterized in silico and validated experimentally using machine learning and rapid prototyping. These metrics were integrated into a design automation workflow, DAFD 2.0, which provides users with droplet generators of a desired performance that are versatile or flow stable. Versatile droplet generators with stable operating points accelerate the development of sophisticated devices by facilitating integration of other microfluidic components and improving the accuracy of design automation tools.
RESUMEN
BACKGROUND: In protein sequences-as there are 61 sense codons but only 20 standard amino acids-most amino acids are encoded by more than one codon. Although such synonymous codons do not alter the encoded amino acid sequence, their selection can dramatically affect the expression of the resulting protein. Codon optimization of synthetic DNA sequences is important for heterologous expression. However, existing solutions are primarily based on choosing high-frequency codons only, neglecting the important effects of rare codons. In this paper, we propose a novel recurrent-neural-network based codon optimization tool, ICOR, that aims to learn codon usage bias on a genomic dataset of Escherichia coli. We compile a dataset of over 7,000 non-redundant, high-expression, robust genes which are used for deep learning. The model uses a bidirectional long short-term memory-based architecture, allowing for the sequential context of codon usage in genes to be learned. Our tool can predict synonymous codons for synthetic genes toward optimal expression in Escherichia coli. RESULTS: We demonstrate that sequential context achieved via RNN may yield codon selection that is more similar to the host genome. Based on computational metrics that predict protein expression, ICOR theoretically optimizes protein expression more than frequency-based approaches. ICOR is evaluated on 1,481 Escherichia coli genes as well as a benchmark set of 40 select DNA sequences whose heterologous expression has been previously characterized. ICOR's performance is measured across five metrics: the Codon Adaptation Index, GC-content, negative repeat elements, negative cis-regulatory elements, and codon frequency distribution. CONCLUSIONS: The results, based on in silico metrics, indicate that ICOR codon optimization is theoretically more effective in enhancing recombinant expression of proteins over other established codon optimization techniques. Our tool is provided as an open-source software package that includes the benchmark set of sequences used in this study.
Asunto(s)
Aminoácidos , Genómica , Codón/genética , Aminoácidos/genética , Escherichia coli/genéticaRESUMEN
Technologies to profoundly engineer biology are becoming increasingly affordable, powerful, and accessible to a widening group of actors. While offering tremendous potential to fuel biological research and the bioeconomy, this development also increases the risk of inadvertent or deliberate creation and dissemination of pathogens. Effective regulatory and technological frameworks need to be developed and deployed to manage these emerging biosafety and biosecurity risks. Here, we review digital and biological approaches of a range of technology readiness levels suited to address these challenges. Digital sequence screening technologies already are used to control access to synthetic DNA of concern. We examine the current state of the art of sequence screening, challenges and future directions, and environmental surveillance for the presence of engineered organisms. As biosafety layer on the organism level, we discuss genetic biocontainment systems that can be used to created host organisms with an intrinsic barrier against unchecked environmental proliferation.
RESUMEN
Microfluidics has developed into a mature field with applications across science and engineering, having particular commercial success in molecular diagnostics, next-generation sequencing, and bench-top analysis. Despite its ubiquity, the complexity of designing and controlling custom microfluidic devices present major barriers to adoption, requiring intuitive knowledge gained from years of experience. If these barriers were overcome, microfluidics could miniaturize biological and chemical research for non-experts through fully-automated platform development and operation. The intuition of microfluidic experts can be captured through machine learning, where complex statistical models are trained for pattern recognition and subsequently used for event prediction. Integration of machine learning with microfluidics could significantly expand its adoption and impact. Here, we present the current state of machine learning for the design and control of microfluidic devices, its possible applications, and current limitations.
Asunto(s)
Técnicas Analíticas Microfluídicas , Microfluídica , Secuenciación de Nucleótidos de Alto Rendimiento , Dispositivos Laboratorio en un Chip , Aprendizaje AutomáticoRESUMEN
In 2019, the first cases of SARS-CoV-2 were detected in Wuhan, China, and by early 2020 the first cases were identified in the United States. SARS-CoV-2 infections increased in the US causing many states to implement stay-at-home orders and additional safety precautions to mitigate potential outbreaks. As policies changed throughout the pandemic and restrictions lifted, there was an increase in demand for COVID-19 testing which was costly, difficult to obtain, or had long turn-around times. Some academic institutions, including Boston University (BU), created an on-campus COVID-19 screening protocol as part of a plan for the safe return of students, faculty, and staff to campus with the option for in-person classes. At BU, we put together an automated high-throughput clinical testing laboratory with the capacity to run 45,000 individual tests weekly by Fall of 2020, with a purpose-built clinical testing laboratory, a multiplexed reverse transcription PCR (RT-qPCR) test, robotic instrumentation, and trained staff. There were many challenges including supply chain issues for personal protective equipment and testing materials in addition to equipment that were in high demand. The BU Clinical Testing Laboratory (CTL) was operational at the start of Fall 2020 and performed over 1 million SARS-CoV-2 PCR tests during the 2020-2021 academic year.
Asunto(s)
COVID-19 , SARS-CoV-2 , COVID-19/diagnóstico , Prueba de COVID-19 , Humanos , Pandemias/prevención & control , Reacción en Cadena en Tiempo Real de la Polimerasa/métodos , Estados UnidosRESUMEN
Cells interact with their environment, communicate among themselves, track time and make decisions through functions controlled by natural regulatory genetic circuits consisting of interacting biological components. Synthetic programmable circuits used in therapeutics and other applications can be automatically designed by computer-aided tools. The Cello software designs the DNA sequences for programmable circuits based on a high-level software description and a library of characterized DNA parts representing Boolean logic gates. This process allows for design specification reuse, modular DNA part library curation and formalized circuit transformations based on experimental data. This protocol describes Cello 2.0, a freely available cross-platform software written in Java. Cello 2.0 enables flexible descriptions of the logic gates' structure and their mathematical models representing dynamic behavior, new formal rules for describing the placement of gates in a genome, a new graphical user interface, support for Verilog 2005 syntax and a connection to the SynBioHub parts repository software environment. Collectively, these features expand Cello's capabilities beyond Escherichia coli plasmids to new organisms and broader genetic contexts, including the genome. Designing circuits with Cello 2.0 produces an abstract Boolean network from a Verilog file, assigns biological parts to each node in the Boolean network, constructs a DNA sequence and generates highly structured and annotated sequence representations suitable for downstream processing and fabrication, respectively. The result is a sequence implementing the specified Boolean function in the organism and predictions of circuit performance. Depending on the size of the design space and users' expertise, jobs may take minutes or hours to complete.
Asunto(s)
Redes Reguladoras de Genes , Programas Informáticos , Automatización , ADN/genética , Escherichia coli/genética , Biología SintéticaRESUMEN
Synthetic biology is the process of forward engineering living systems. These systems can be used to produce biobased materials, agriculture, medicine, and energy. One approach to designing these systems is to employ techniques from the design of embedded electronics. These techniques include abstraction, standards, modularity, automated design, and formal semantic models of computation. Together, these elements form the foundation of "biodesign automation," where software, robotics, and microfluidic devices combine to create exciting biological systems of the future. This paper describes a "hardware, software, wetware" codesign vision where software tools can be made to act as "genetic compilers" that transform high-level specifications into engineered "genetic circuits" (wetware). This is followed by a process where automation equipment, well-defined experimental workflows, and microfluidic devices are explicitly designed to house, execute, and test these circuits (hardware). These systems can be used as either massively parallel experimental platforms or distributed bioremediation and biosensing devices. Next, scheduling and control algorithms (software) manage these systems' actual execution and data analysis tasks. A distinguishing feature of this approach is how all three of these aspects (hardware, software, and wetware) may be derived from the same basic specification in parallel and generated to fulfill specific cost, performance, and structural requirements.
RESUMEN
Importance: The COVID-19 pandemic has severely disrupted US educational institutions. Given potential adverse financial and psychosocial effects of campus closures, many institutions developed strategies to reopen campuses in the fall 2020 semester despite the ongoing threat of COVID-19. However, many institutions opted to have limited campus reopening to minimize potential risk of spread of SARS-CoV-2. Objective: To analyze how Boston University (BU) fully reopened its campus in the fall of 2020 and controlled COVID-19 transmission despite worsening transmission in Boston, Massachusetts. Design, Setting, and Participants: This multifaceted intervention case series was conducted at a large urban university campus in Boston, Massachusetts, during the fall 2020 semester. The BU response included a high-throughput SARS-CoV-2 polymerase chain reaction testing facility with capacity to deliver results in less than 24 hours; routine asymptomatic screening for COVID-19; daily health attestations; adherence monitoring and feedback; robust contact tracing, quarantine, and isolation in on-campus facilities; face mask use; enhanced hand hygiene; social distancing recommendations; dedensification of classrooms and public places; and enhancement of all building air systems. Data were analyzed from December 20, 2020, to January 31, 2021. Main Outcomes and Measures: SARS-CoV-2 diagnosis confirmed by reverse transcription-polymerase chain reaction of anterior nares specimens and sources of transmission, as determined through contact tracing. Results: Between August and December 2020, BU conducted more than 500â¯000 COVID-19 tests and identified 719 individuals with COVID-19, including 496 students (69.0%), 11 faculty (1.5%), and 212 staff (29.5%). Overall, 718 individuals, or 1.8% of the BU community, had test results positive for SARS-CoV-2. Of 837 close contacts traced, 86 individuals (10.3%) had test results positive for COVID-19. BU contact tracers identified a source of transmission for 370 individuals (51.5%), with 206 individuals (55.7%) identifying a non-BU source. Among 5 faculty and 84 staff with SARS-CoV-2 with a known source of infection, most reported a transmission source outside of BU (all 5 faculty members [100%] and 67 staff members [79.8%]). A BU source was identified by 108 of 183 undergraduate students with SARS-CoV-2 (59.0%) and 39 of 98 graduate students with SARS-CoV-2 (39.8%); notably, no transmission was traced to a classroom setting. Conclusions and Relevance: In this case series of COVID-19 transmission, BU used a coordinated strategy of testing, contact tracing, isolation, and quarantine, with robust management and oversight, to control COVID-19 transmission in an urban university setting.
Asunto(s)
COVID-19/prevención & control , Control de Infecciones/normas , Universidades/tendencias , Población Urbana/estadística & datos numéricos , Boston/epidemiología , COVID-19/epidemiología , COVID-19/transmisión , Trazado de Contacto/instrumentación , Trazado de Contacto/métodos , Higiene de las Manos/métodos , Humanos , Control de Infecciones/métodos , Control de Infecciones/estadística & datos numéricos , Cuarentena/métodos , Universidades/organización & administraciónRESUMEN
Droplet-based microfluidic devices hold immense potential in becoming inexpensive alternatives to existing screening platforms across life science applications, such as enzyme discovery and early cancer detection. However, the lack of a predictive understanding of droplet generation makes engineering a droplet-based platform an iterative and resource-intensive process. We present a web-based tool, DAFD, that predicts the performance and enables design automation of flow-focusing droplet generators. We capitalize on machine learning algorithms to predict the droplet diameter and rate with a mean absolute error of less than 10 µm and 20 Hz. This tool delivers a user-specified performance within 4.2% and 11.5% of the desired diameter and rate. We demonstrate that DAFD can be extended by the community to support additional fluid combinations, without requiring extensive machine learning knowledge or large-scale data-sets. This tool will reduce the need for microfluidic expertise and design iterations and facilitate adoption of microfluidics in life sciences.
Asunto(s)
Aprendizaje Automático , Microfluídica , Reología , Algoritmos , Automatización , Bases de Datos como Asunto , Diseño de Equipo , Dispositivos Laboratorio en un Chip , Redes Neurales de la ComputaciónRESUMEN
Molecular biologists rely on the use of fluorescent probes to take measurements of their model systems. These fluorophores fall into various classes (e.g. fluorescent dyes, fluorescent proteins, etc.), but they all share some general properties (such as excitation and emission spectra, brightness) and require similar equipment for data acquisition. Selecting an ideal set of fluorophores for a particular measurement technology or vice versa is a multidimensional problem that is difficult to solve with ad hoc methods due to the enormous solution space of possible fluorophore panels. Choosing sub-optimal fluorophore panels can result in unreliable or erroneous measurements of biochemical properties in model systems. Here, we describe a set of algorithms, implemented in an open-source software tool, for solving these problems efficiently to arrive at fluorophore panels optimized for maximal signal and minimal bleed-through.
Asunto(s)
Algoritmos , Colorantes Fluorescentes/metabolismo , Genes Reporteros , Biología Computacional/métodos , Bases de Datos de Compuestos Químicos , Internet , Programas InformáticosRESUMEN
Electrode integration significantly increases the versatility of droplet microfluidics, enabling label-free sensing and manipulation at a single-droplet (single-cell) resolution. However, common fabrication techniques for integrating electronics into microfluidics are expensive, time-consuming, and can require cleanroom facilities. Here, we present a simple and cost-effective method for integrating electrodes into thermoplastic microfluidic chips using an off-the-shelf conductive ink. The developed conductive ink electrodes cost less than $10 for an entire chip, have been shown here in channel geometries as small as 75 µm by 50 µm, and can go from fabrication to testing within a day without a cleanroom. The geometric fabrication limits of this technique were explored over time, and proof-of-concept microfluidic devices for capacitance sensing, droplet merging, and droplet sorting were developed. This novel method complements existing rapid prototyping systems for microfluidics such as micromilling, laser cutting, and 3D printing, enabling their wider use and application.
RESUMEN
Cells can be programmed to monitor and react to their environment using genetic circuits. Design automation software maps a desired circuit function to a DNA sequence, a process that requires units of gene regulation (gates) that are simple to connect and behave predictably. This poses a challenge for eukaryotes due to their complex mechanisms of transcription and translation. To this end, we have developed gates for yeast (Saccharomyces cerevisiae) that are connected using RNA polymerase flux as the signal carrier and are insulated from each other and host regulation. They are based on minimal constitutive promoters (~120 base pairs), for which rules are developed to insert operators for DNA-binding proteins. Using this approach, we constructed nine NOT/NOR gates with nearly identical response functions and 400-fold dynamic range. In circuits, they are transcriptionally insulated from each other by placing ribozymes downstream of terminators to block nuclear export of messenger RNAs resulting from RNA polymerase readthrough. Based on these gates, Cello 2.0 was used to build circuits with up to 11 regulatory proteins. A simple dynamic model predicts the circuit response over days. Genetic circuit design automation for eukaryotes simplifies the construction of regulatory networks as part of cellular engineering projects, whether it be to stage processes during bioproduction, serve as environmental sentinels or guide living therapeutics.
Asunto(s)
Redes Reguladoras de Genes , Saccharomyces cerevisiae/genética , Automatización , Secuencia de Bases , ADN/genética , Proteínas de Unión al ADN/metabolismo , ARN Polimerasas Dirigidas por ADN/metabolismo , Regulación Fúngica de la Expresión Génica , Regiones Promotoras Genéticas , ARN Catalítico , Programas Informáticos , Biología Sintética , Factores de Transcripción/genética , Transcripción GenéticaRESUMEN
[This corrects the article DOI: 10.1371/journal.pone.0223935.].
RESUMEN
The design of microfluidic Lab on a Chip (LoC) systems is an onerous task requiring specialized skills in fluid dynamics, mechanical design drafting, and manufacturing. Engineers face significant challenges during the labor-intensive process of designing microfluidic devices, with very few specialized tools that help automate the process. Typical design iterations require the engineer to research the architecture, manually draft the device layout, optimize for manufacturing processes, and manually calculate and program the valve sequences that operate the microfluidic device. The problem compounds when engineers not only have to test the functionality of the chip but are also expected to optimize them for the robust execution of biological assays. In this paper, we present an interactive tool for designing continuous flow microfluidic devices. 3DµF is the first completely open source interactive microfluidic system designer that readily supports state of the art design automation algorithms. Through various case studies, we show 3DµF can be used to reproduce designs from literature, provide metrics for evaluating microfluidic design complexity and showcase how 3DµF is a platform for integrating a wide assortment of engineering techniques used in the design of microfluidic devices as a part of the standard design workflow.
RESUMEN
The advancement of synthetic biology requires the ability to create new DNA sequences to produce unique behaviors in biological systems. Automation is increasingly employed to carry out well-established assembly methods of DNA fragments in a multiplexed, high-throughput fashion, allowing many different configurations to be tested simultaneously. However, metrics are required to determine when automation is warranted based on factors such as assembly methodology, protocol details, and number of samples. The goal of our synthetic biology automation work is to develop and test protocols, hardware, and software to investigate and optimize DNA assembly through quantifiable metrics. We performed a parameter analysis of DNA assembly to develop a standardized, highly efficient, and reproducible MoClo protocol, suitable to be used both manually and with liquid-handling robots. We created a key DNA assembly metric (Q-metric) to characterize a given automation method's advantages over conventional manual manipulations with regard to researchers' highest-priority parameters: output, cost, and time. A software tool called Puppeteer was developed to formally capture these metrics, help define the assembly design, and provide human and robotic liquid-handling instructions. Altogether, we contribute to a growing foundation of standardizing practices, metrics, and protocols for automating DNA assembly.
Asunto(s)
Automatización de Laboratorios/métodos , Clonación Molecular/métodos , ADN/genética , Ingeniería Genética/métodos , Guías de Práctica Clínica como Asunto , Robótica/métodos , Biología Sintética/métodos , Ingeniería Genética/normasRESUMEN
The required step in all droplet-based devices is droplet formation. A droplet generator must deliver an application-specific performance that includes a prescribed droplet size and generation frequency while producing monodisperse droplets. The desired performance is usually reached through several cost- and time-inefficient design iterations. To address this, we take advantage of a low-cost rapid prototyping method and provide a framework that enables researchers to make informed decisions on how to change geometric parameters and flow conditions to tune the performance of a microfluidic flow-focusing droplet generator. We present the primary and secondary parameters necessary for fine-tuning droplet formation over a wide range of capillary numbers and flow rate ratios. Once the key parameters are identified, we demonstrate the effect of geometric parameters and flow conditions on droplet size, generation rate, polydispersity, and generation regime. Using this framework, a wide range of droplet diameters (i.e., 30-400 µm) and generation rates (i.e., 0.5-800 Hz) was achieved.
RESUMEN
Computational models are essential to engineer predictable biological systems and to scale up this process for complex systems. Computational modeling often requires expert knowledge and data to build models. Clearly, manual creation of models is not scalable for large designs. Despite several automated model construction approaches, computational methodologies to bridge knowledge in design repositories and the process of creating computational models have still not been established. This paper describes a workflow for automatic generation of computational models of genetic circuits from data stored in design repositories using existing standards. This workflow leverages the software tool SBOLDesigner to build structural models that are then enriched by the Virtual Parts Repository API using Systems Biology Open Language (SBOL) data fetched from the SynBioHub design repository. The iBioSim software tool is then utilized to convert this SBOL description into a computational model encoded using the Systems Biology Markup Language (SBML). Finally, this SBML model can be simulated using a variety of methods. This workflow provides synthetic biologists with easy to use tools to create predictable biological systems, hiding away the complexity of building computational models. This approach can further be incorporated into other computational workflows for design automation.