RESUMEN
Formic acid is utilized to induce esterification and chemical gelatinization in starch, particularly in the fabrication of electrospun fibers for nanomaterial production. This study investigated the impact of different concentrations (15, 20, 25, and 30 %) of cassava starch and formic acid as a solvent on the characteristics of the resultant polymeric solutions and electrospun fibers. Morphology, size distribution, thermogravimetric properties, diffraction patterns, and relative crystallinity were evaluated for the electrospun fibers. The amylose content of starch varied from 16.5 to 23.7 %, decreasing with esterification, achieving a degree of substitution of approximately 0.93. The solution-rheology exhibited elastic behavior, with viscosity increasing as starch concentration increased, hindering the fabrication of fibers at 25 and 30 % starch. Successful electrospun fibers were formed using 15 % and 20 % starch, displaying homogeneous morphologies with mean diameters of 165 nm and 301 nm, respectively. Esterification influenced thermogravimetric properties, leading to fibers with reduced degradation temperatures and mass loss compared to native starches. The electrospun fibers presented an amorphous structure, indicating a drastic reduction in relative crystallinity from 35.2 % in native starch to 8.5 % for esterified starches. This study highlights the intricate relationship between starch concentration, esterification, and solution viscosity, affecting the electrospinnability and properties of starch-polymeric solutions.
Asunto(s)
Formiatos , Manihot , Almidón , Manihot/química , Esterificación , Formiatos/química , Almidón/química , Viscosidad , Amilosa/química , Reología , TermogravimetríaRESUMEN
Natural fermentation with sun-drying is a modification that promotes the expansion capacity of starch, and its effects on potato starch have not been reported so far. The aim of this study was to evaluate the effects of the amylose content of potato (Solanum tuberosum L.) starches and natural fermentation followed by oven or sun drying on its properties. Cassava starch was also used a control. Native and fermented starches were evaluated based on their chemical composition, amylose, carboxyl and carbonyl content as well as their thermal, pasty, and morphological properties. The fermentation water was evaluated by pH and titratable acidity to control the process. Puffed balls were prepared to evaluate expandability, mass loss, porosity and texture. The fermentation intensity was greater for potato and cassava starch with low-amylose content than for potato starch with higher amylose content. In addition, the acidity of the fermentation water increased faster with cassava starch than with potato starches. The fermented potato starches with the highest amylose content had low acidity and low expansion capacity compared to the fermented potato and cassava starches with low-amylose content. Fermentation and sun-drying of low-amylose potato and cassava starches increased the expansion and reduced the hardness of the puffed balls.
Asunto(s)
Solanum tuberosum , Almidón , Almidón/química , Amilosa/química , Solanum tuberosum/química , Fermentación , AguaRESUMEN
This study explores the fabrication of nanofibers using different types of gelatins, including bovine, porcine, and fish gelatins. The gelatins exhibited distinct molecular weights and apparent viscosity values, leading to different entanglement behavior and nanofiber production. The electrospinning technique produced nanofibers with diameters from 47 to 274 nm. The electrospinning process induced conformational changes, reducing the overall crystallinity of the gelatin samples. However, porcine gelatin nanofibers exhibited enhanced molecular ordering. These findings highlight the potential of different gelatin types to produce nanofibers with distinct physicochemical properties. Overall, this study sheds light on the relationship between gelatin properties, electrospinning process conditions, and the resulting nanofiber characteristics, providing insights for tailored applications in various fields.
RESUMEN
Solid-state fermentation (SSF) is a type of fermentation process with potential to use agro-industrial by-products as a carbon source. Nonetheless, there are few studies evaluating SSF compared to submerged fermentation (SmF) to produce polyhydroxyalkanoates (PHAs). Different methodologies are available associating the two processes. In general, the studies employ a 1st step by SSF to hydrolyze the agro-industrial by-products used as a carbon source, and a 2nd step to produce PHA that can be carried out by SmF or SSF. This paper reviewed and compared the different methodologies described in the literature to assess their potential for use in PHA production. The studies evaluated showed that highest PHA yields (86.2% and 82.3%) were achieved by associating SSF and SmF by Cupriavidus necator. Meanwhile, in methodologies using only SSF, Bacillus produced the highest yields (62% and 56.8%). Since PHA (%) does not necessarily represent a higher production by biomass, the productivity parameter was also compared between studies. We observed that the highest productivity results did not necessarily represent the highest PHA (%). C. necator presented the highest PHA yields associating SSF and SmF, however, is not the most suitable microorganism for PHA production by SSF. Concomitant use of C. necator and Bacillus is suggested for future studies in SSF. Also, it discusses the lack of studies on the association of the two fermentation methodologies, and on the scaling of SSF process for PHA production. In addition to demonstrating the need for standardization of results, for comparison between different methodologies.
Asunto(s)
Bacillus , Cupriavidus necator , Fermentación , Biomasa , CarbonoRESUMEN
Survival of Lactococcus lactis subsp. lactis R7, microencapsulated with whey and inulin, was analyzed when added to blueberry juice, milk, and cream. For 28 days, cell viability was evaluated for storage (4 °C), simulated gastrointestinal tract (GIT), and thermal resistance. All matrices demonstrated high cell concentration when submitted to GIT (11.74 and 12 log CFU mL-1), except for the blueberry juice. The thermal resistance analysis proved the need for microencapsulation, regardless of the food matrix. The results indicate that L. lactis R7 microcapsules have potential for application in different matrices and development of new probiotic products by thermal processing.
Asunto(s)
Lactococcus lactis , ProbióticosRESUMEN
The widespread application of soluble enzymes in industrial processes is considered restrict due to instability of enzymes outside optimum operating conditions. For instance, enzyme immobilization can overcome this issue. In fact, chitosan-based nanofibers have outstanding properties, which can improve the efficiency in enzyme immobilization and the stability of enzymes over a wide range of operating conditions. These properties include biodegradability, antimicrobial activity, non-toxicity, presence of functional groups (amino and hydroxyl), large surface area to volume ratio, enhanced porosity and mechanical properties, easy separations and reusability. Therefore, the present review explores the advantages and drawbacks concerning the different methods of enzyme immobilization, including adsorption, cross-linking and entrapment. All these strategies have questions that still need to be addressed, such as elucidation of adsorption mechanism (physisorption or chemisorption); effect of cross-linking reaction on intramolecular and intermolecular interactions and the effect of internal and external diffusional limitations on entrapment of enzymes. Moreover, the current review discusses the challenges and prospects regarding the application of chitosan-based nanofibers in enzyme immobilization, towards maximizing catalytic activity and lifetime.