Layered double hydroxides (LDHs) as efficient and safe carriers for miRNA inhibitors: In vitro and in vivo assessment of biocompatibility.

Layered double hydroxides (LDHs) have been employed as nano-sized carriers for therapeutic/bio-active molecules, including small interfering RNAs (siRNAs). However, the potential of LDHs nanoparticles for an efficient and safe antisense oligonucleotide (AMO) delivery still requires studies. In this research, we have tested the suitability of a Mg-Al-LDH-based nanocarrier loaded with a miRNA-196b-5p inhibitor. LDHs (and LDH-Oligo complex) were synthesized by the coprecipitation method followed by physicochemical characterization as hydrodynamic size, surface charge, crystallinity, and chemical groups. Thymic endothelial cell line (tEnd.1) were transfected with LDH-Oligo and were evaluated for i. cell viability by MTT, trypan blue, and propidium iodide assays; ii. transfection efficiency by flow cytometry, and iii. depletion of miRNA-196b-5p by RT-qPCR. In addition, Drosophila melanogaster larvae were fed LDHs and evaluated for: i. larval motility; ii. pupation rate; iii. larval-pupal transition; iv. lethality, and v. emergence rate. We demonstrated that LDHs nanoparticles are stable in aqueous solutions and exhibit a regular hexagonal shape. The LDH-AMO complex showed a transfection efficiency of 93.95 ± 2.15 % and induced a significant depletion of miRNA-196b-5p 48h after transfection. No cytotoxic effects were detected in tEnd.1 cells at concentrations up to 50 µg/ml, as well as in Drosophila exposed up to 500 µg of LDH. In conclusion, our data suggest that LDHs are biocompatible and efficient carriers for miRNA inhibitors and can be used as a viable and effective tool in functional miRNA inhibition assays.

Layered double hydroxides for controlled fluoride release.

This study aims to develop a nano-sized fluoridated layered double hydroxide (LDH)-based release system via hydrothermal treatment for the controlled delivery of fluoride (F-) ions in the oral environment. The synthesis of conventional LDH-type (C-LDH) precursor nanomaterials was conducted using a co-precipitation method at constant pH, and the nanoparticulate-LDH (N-LDH) was synthesized by a hydrothermal procedure. Fluoride LDH (F-LDH) products were obtained through indirect synthesis using the precursor ion-exchange technique by varying the agitation time (2 and 24 h) and temperature (25 and 40 °C) to produce 12 material samples. The materials were characterized by energy dispersive x-ray, hexamethyldisilazane, digital radiography x-ray, Fourier-transform infrared, thermogravimetric analysis, and scanning electron microscopy. Additionally, the F-release kinetic profile was evaluated for 21 d in neutral and acid media with mathematical model analysis. Products with varying F-quantities were obtained, revealing specific release profiles. In general, there was a higher F-release in the acid medium, with emphasis on F-LDH-8. Fluoride-LDH and controlled fluoride delivery was successfully obtained, proving the potential of these nanomaterials as alternative anti-caries agents.

Layered double hydroxides for controlled fluoride release

Abstract This study aims to develop a nano-sized fluoridated layered double hydroxide (LDH)-based release system via hydrothermal treatment for the controlled delivery of fluoride (F-) ions in the oral environment. The synthesis of conventional LDH-type (C-LDH) precursor nanomaterials was conducted using a co-precipitation method at constant pH, and the nanoparticulate-LDH (N-LDH) was synthesized by a hydrothermal procedure. Fluoride LDH (F-LDH) products were obtained through indirect synthesis using the precursor ion-exchange technique by varying the agitation time (2 and 24 h) and temperature (25 and 40 °C) to produce 12 material samples. The materials were characterized by energy dispersive x-ray, hexamethyldisilazane, digital radiography x-ray, Fourier-transform infrared, thermogravimetric analysis, and scanning electron microscopy. Additionally, the F-release kinetic profile was evaluated for 21 d in neutral and acid media with mathematical model analysis. Products with varying F-quantities were obtained, revealing specific release profiles. In general, there was a higher F-release in the acid medium, with emphasis on F-LDH-8. Fluoride-LDH and controlled fluoride delivery was successfully obtained, proving the potential of these nanomaterials as alternative anti-caries agents.

Staphylococcal cassette chromosome mec elements from Staphylococcus intermedius group (SIG) isolates from dogs in a center for veterinary diagnostics in Brazil / Cassetes cromossômicos estafilocócicos mec de isolados do grupo Staphylococcus intermedius (GSI) de cães em um centro veterinário de diagnósticos no Brasil

ABSTRACT: Methicillin resistance in the Staphylococcus intermedius group (SIG) has emerged in small animal practice. Methicillin-resistant SIG (MRSIG) members have been implicated as causes of infections in both companion animals and humans. Staphylococcal cassette chromosome mec (SCCmec) elements carry the mecA/C genes, which encode for the transpeptidase PBP2a (PBP2') responsible for β-lactam antibiotic resistance in staphylococci. This study examined the SCCmec types of MRSIG isolates from different clinical specimens of dogs that exhibited methicillin MIC ≥ 0.5 μg/mL by an automated identification and susceptibility system in a Center for Veterinary Diagnostics in São Paulo, Brazil. Susceptibility to methicillin was determined by broth microdilution testing, and Oxoid® M.I.C.Evaluator® strips. PBP2a production was detected using a latex agglutination assay. SCCmec typing was performed according to the International Working Group on the Classification of Staphylococcal Cassette Chromosome Elements (IWG-SCC) guidelines. SCCmec type II (2A), SCCmec type III (3A), composite SCC structures consisting of a class A mec gene complex in addition to multiple ccr gene complexes, and non-typable SCCmec elements were reported in these MRSIG isolates. SCCmec type variants differing from those so far acknowledged by IWG-SCC were found, indicating new rearrangements in the genetic context of mecA in these canine MRSIG isolates.

RESUMO: A resistência à meticilina no grupo Staphylococcus intermedius (GSI) tem aumentado na clínica de pequenos animais. Membros GSI resistentes à meticilina (GSIRM) têm sido causas de infecções tanto em animais de companhia e humanos. Cassetes cromossômicos estafilocócicos mec (SCCmec) carregam os genes mecA/C, que codificam a transpeptidase PBP2a (PBP2') responsável pela resistência aos antibióticos β-lactâmicos em estafilococos. Nosso objetivo foi investigar os elementos SCCmec de GSIRM isolados de diferentes amostras clínicas de cães que exibiram CIM de meticilina ≥ 0,5 μg/mL por meio de um sistema automatizado em um Centro Veterinário de Diagnósticos em São Paulo, Brasil. A sensibilidade à meticilina foi determinada por meio do teste de microdiluição em caldo e fitas Oxoid® M.I.C.Evaluator®. A produção de PBP2a foi detectada usando um ensaio de aglutinação de látex. A tipagem dos elementos SCCmec foi realizada de acordo com as diretrizes do International Working Group on the Classification of Staphylococcal Cassette Chromosome Elements (IWG-SCC). SCCmec tipo II (2A), SCCmec tipo III (3A), SCC compostos de um complexo mec de classe A com múltiplos complexos ccr, e elementos SCCmec não tipáveis foram encontrados nesses isolados GSIRM. Variantes que diferem dos elementos SCCmec reconhecidos até o momento pelo IWG-SCC foram encontradas, indicando novos rearranjos no contexto genético de mecA nesses isolados GSIRM caninos.

Characterization and Stability of the Antimony-Quercetin Complex.

Purpose: Quercetin is a flavonoid known for its therapeutic properties and for forming complexes. Although the antimony-quercetin (SbQ) complex has been produced before, no previous exploration of its characteristics has been published in literature. Thus, this study aimed to characterize this complex, assess its stability and investigate its complexation site through its antibacterial activity. Methods: The SbQ complex was synthetized using Sb(III) potassium tartrate trihydrate and quercetin anhydrous (1:1) (v/v) as a solution and dried using three methods: rotaevaporation, lyophilization and spray drying. The material, in solution, was analyzed by UV-vis and fluorimetry; and, in the powder, by X-ray diffraction (XRD), both scanning electronic and fluorescence microscopy and infrared spectroscopy (FT-IR). Antimicrobial activity was evaluated via broth microdilution. Results: UV-vis exhibited a shoulder peak at 291 nm indicating metal chelation at C-ring of quercetin and confirmed 1:1 stoichiometry. Spectrofluorimetry showed an increase of intensity with the complex formation with an emission band (525 nm). After drying, XRD and SEM indicated loss of crystallinity and a difference in shape and size of the complex compared to its precursors. FT-IR suggested by a shift of frequency of the carbonyl group (1661 cm-1) that the quercetin bond to antimony by the C-3, followed by positions C-5 and C-4 carbonyl, which has been confirmed by MIC through the structure-activity relationship of the antibacterial activity of quercetin. Conclusion: These results provided a characterization of SbQ complex with the confirmation of its binding site, working as a guide for future studies involving this complex.

Recent advances in layered double hydroxides applied to photoprotection.

Layered double hydroxides have received more attention from researchers due to their range of applications, ease of synthesis and low cost of production. With broader knowledge about solar radiation effects on the body, the use of sunscreens has become even more important. The ability of some nanostructures, such as layered double hydroxides, to act as matrices has made it possible to obtain improvements in photoprotective formulations, with solutions to problems caused by radiation and sunscreens. This review article brings together the most recent advances of these clays, the layered double hydroxides, applied to photoprotection.

Recent advances in layered double hydroxides applied to photoprotection / Recentes avanços dos hidróxidos duplos lamelares aplicados à fotoproteção

ABSTRACT Layered double hydroxides have received more attention from researchers due to their range of applications, ease of synthesis and low cost of production. With broader knowledge about solar radiation effects on the body, the use of sunscreens has become even more important. The ability of some nanostructures, such as layered double hydroxides, to act as matrices has made it possible to obtain improvements in photoprotective formulations, with solutions to problems caused by radiation and sunscreens. This review article brings together the most recent advances of these clays, the layered double hydroxides, applied to photoprotection.

RESUMO Os hidróxidos duplos lamelares vêm ganhando maior atenção de pesquisadores, em decorrência da gama de aplicações, da facilidade de síntese e do baixo custo de produção. Com o crescente conhecimento sobre diversos efeitos da radiação solar sobre o organismo, a utilização de fotoprotetores tem se tornado indispensável. A capacidade de nanoestruturas, como os hidróxidos duplos lamelares, atuarem como matrizes possibilitou melhorias nas formulações fotoprotetoras, tendo em vista os problemas provocados pela radiação, bem como por alguns filtros solares. Este artigo de revisão reúne os avanços mais recentes destas argilas, os hidróxidos duplos lamelares, aplicados à fotoproteção.

Lipase Activity in the Larval Midgut of Rhynchophorus palmarum: Biochemical Characterization and the Effects of Reducing Agents.

Lipases have key roles in insect lipid acquisition, storage, and mobilization and are also fundamental to many physiological processes in insects. Lipids are an important component of insect diets, where they are hydrolyzed in the midgut lumen, absorbed, and used for the synthesis of complex lipids. The South American palm weevil Rhynchophorus palmarum is one of the most important pests on commercial palm plantations. However, there are few studies about lipid digestion for this insect. In this work, we have described the biochemical characterization of the lipase activity in the posterior midgut of the R. palmarum palm weevil. Lipase activity was highest between the temperatures of 37 °C and 45 °C and at pH 6.5. Lipase activity was also sensitive to variations in salt and calcium concentrations. Lipases have been described structurally as enzymes with the Ser-His-Asp Catalytic Triad, containing an active serine. The serine protease inhibitor PMSF (phenylmethane sulfonyl fluoride) inhibited the lipases from R. palmarum, demonstrating the importance of a serine residue for this activity. The ability of the lipases to hydrolyze p-Nitrophenyl esters with different chain lengths has revealed the activities of a broad range of substrates. The lipase activities of R. palmarum increased in the presence of reduced glutathione (GSH) and dithiothreitol (DTT), while in the presence of oxidized glutathione (GSSG), activities were drastically reduced. To our knowledge, this study has provided the first information about lipase activity in the R. palmarum palm weevil.

Polymeric Nanoparticles of Brazilian Red Propolis Extract: Preparation, Characterization, Antioxidant and Leishmanicidal Activity.

The ever-increasing demand for natural products and biotechnology derived from bees and ultra-modernization of various analytical devices has facilitated the rational and planned development of biotechnology products with a focus on human health to treat chronic and neglected diseases. The aim of the present study was to prepare and characterize polymeric nanoparticles loaded with Brazilian red propolis extract and evaluate the cytotoxic activity of "multiple-constituent extract in co-delivery system" for antileishmanial therapies. The polymeric nanoparticles loaded with red propolis extract were prepared with a combination of poly-ε-caprolactone and pluronic using nanoprecipitation method and characterized by different analytical techniques, antioxidant and leishmanicidal assay. The red propolis nanoparticles in aqueous medium presented particle size (200-280 nm) in nanometric scale and zeta analysis (-20 to -26 mV) revealed stability of the nanoparticles without aggregation phenomenon during 1 month. After freeze-drying method using cryoprotectant (sodium starch glycolate), it was possible to observe particles with smooth and spherical shape and apparent size of 200 to 400 nm. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and thermal analysis revealed the encapsulation of the flavonoids from the red propolis extract into the polymeric matrix. Ultra performance liquid chromatography coupled with diode array detector (UPLC-DAD) identified the flavonoids liquiritigenin, pinobanksin, isoliquiritigenin, formononetin and biochanin A in ethanolic extract of propolis (EEP) and nanoparticles of red propolis extract (NRPE). The efficiency of encapsulation was determinate, and median values (75.0 %) were calculated using UPLC-DAD. 2,2-Diphenyl-1-picryhydrazyl method showed antioxidant activity to EEP and red propolis nanoparticles. Compared to negative control, EEP and NRPE exhibited leishmanicidal activity with an IC50 value of ≅38.0 µg/mL and 31.3 µg/mL, 47.2 µg/mL, 154.2µg/mL and 193.2 µg/mL for NRPE A1, NRPE A2, NRPE A3 and NRPE A4, respectively. Nanoparticles loaded with red propolis extract in co-delivery system and EEP presented cytotoxic activity on Leishmania (V.) braziliensis. Red propolis extract loaded in nanoparticles has shown to be potential candidates as intermediate products for preparation of various pharmaceutical dosage forms containing red propolis extract in the therapy against negligible diseases such as leishmaniasis. Graphical Abstract Some biochemical mechanisms of cellular debridement of Leishmania (V.) braziliensis species by the flavonoids of red propolis extract (EEP) or NRPE loaded with red propolis extract.

Estudo comparativo do uso tópico de própolis verde e vermelha na reparação de feridas em ratos / Comparative study of topical green and red propolis in the repair of wounds induced in rats

OBJETIVO: Avaliar a ação cicatrizante de própolis verde e vermelha, correlacionando ao teor de flavonoides MÉTODOS: Foi realizada a quantificação de flavonoides totais dos extratos etanólicos de própolis verde e vermelha para posterior incorporação em pomada base a 20%. Utilizou-se 20 ratos Wistar distribuídos em quatro grupos: solução salina a 0,9% (S), pomada base (B), pomada própolis verde (G), pomada própolis vermelha (R), todos submetidos à confecção de lesões excisivas na região mediana do dorso. Os ratos foram tratados diariamente durante 15 dias. Neste período foram observados peso; temperatura corporal; diâmetro das feridas. Para análise histológica, amostras das feridas foram coletadas. Ao fim do experimento foram realizadas coleta sanguínea e remoção do rim e fígado para análises bioquímica e histológica. RESULTADOS: Os teores de flavonoides totais das própolis verde (4,50 %) e vermelha (5,92 %) foram elevados (>2 %), mas, embora a segunda apresente teor maior que a primeira, a evolução da própolis verde, macro e histologicamente, foi melhor na reparação das feridas. Não foram observadas nefro ou hepatotoxicidade, resultado corroborado pelos ensaios bioquímicos (TGP e albumina). A própolis influiu na redução de colesterol total, triglicerídeos e glicemia. CONCLUSÃO: Não foi possível correlacionar o teor de flavonoides totais com a ação cicatrizante da própolis. O dado revela a necessidade da elucidação dos flavonoides encontrados em cada classe de própolis para desvendar qual (ou quais) flavonoide(s) seria(m) representativo(s) no processo cicatricial.

OBJECTIVE: To evaluate the healing action of green and red propolis, correlating it with the content of flavonoids. METHODS: We performed quantification of total flavonoids of green and red propolis ethanol extracts for subsequent incorporation in ointment base to 20%. We used 20 Wistar rats divided into four groups: 0.9% saline (S), ointment base (B), green propolis ointment (G) and red propolis ointment (R). All animals were submitted to excisional lesions in the midian back region. The rats were treated daily for 15 days. During this period we observed weight, body temperature and diameters of the wounds. For histological analysis, samples were collected from wounds. At the end of the experiment we performed blood collection and removal of the kidney and liver for biochemical and histological analyzes. RESULTS: The levels of total flavonoids of green (4.50%) and red (5.92%) propolis were high (> 2%), but, while the latter showed a content larger than the former, the evolution of green propolis was better in the repair of wounds, both macroscopically and histologically. There were no nephrotoxicity or hepatotoxicity, a result confirmed by biochemical tests (ALT and albumin). Propolis influenced the reduction of total cholesterol, triglycerides and glucose. CONCLUSION: There was no correlation between total flavonoid contents and the healing action of propolis. This reveals the need for elucidation of the flavonoids found in each class of propolis to unravel which one(s) would be important for the healing process.

Comparative study of topical green and red propolis in the repair of wounds induced in rats.

OBJECTIVE: To evaluate the healing action of green and red propolis, correlating it with the content of flavonoids. METHODS: We performed quantification of total flavonoids of green and red propolis ethanol extracts for subsequent incorporation in ointment base to 20%. We used 20 Wistar rats divided into four groups: 0.9% saline (S), ointment base (B), green propolis ointment (G) and red propolis ointment (R). All animals were submitted to excisional lesions in the midian back region. The rats were treated daily for 15 days. During this period we observed weight, body temperature and diameters of the wounds. For histological analysis, samples were collected from wounds. At the end of the experiment we performed blood collection and removal of the kidney and liver for biochemical and histological analyzes. RESULTS: The levels of total flavonoids of green (4.50%) and red (5.92%) propolis were high (> 2%), but, while the latter showed a content larger than the former, the evolution of green propolis was better in the repair of wounds, both macroscopically and histologically. There were no nephrotoxicity or hepatotoxicity, a result confirmed by biochemical tests (ALT and albumin). Propolis influenced the reduction of total cholesterol, triglycerides and glucose. CONCLUSION: There was no correlation between total flavonoid contents and the healing action of propolis. This reveals the need for elucidation of the flavonoids found in each class of propolis to unravel which one(s) would be important for the healing process.

Preparation and evaluation of a new nano pharmaceutical excipients and drug delivery system based in polyvinylpyrrolidone and silicate.

PURPOSE: This work describes the preparation of new nanocomposites based on lamellar silicates (AAM-alkyl ammonium montmorillonite) obtained by the intercalation of PVP K30 and glyceril monostearate. METHODS: By XRD, TGA and DSC analysis the AAM was characterized and its compactation characteristics, functionality and toxicity were also tested. The AAM/PVP K-30 and AAM/GME nanocomposite obtained were evaluated to identify the interlamellar spacing values by XRD diffratograms. Tablets were prepared using methyldopa and theophylline as model drugs and the dissolution tests were carried out in simulated gastric fluid and simulated enteric fluid. RESULTS: AAM showed a good compactability and compressibility characteristics for tablets preparation. The intercalation yields (approximately 25%) of the nanocomposites were efficient. The AAM/PVP K-30 nanocomposites were successfully tested as dissolution enhancers and sustained release matrixes. CONCLUSIONS: The results also suggested the promising use of AAM (viscogel B8) and the new nanocomposite prepared by clay/PVP K-30 intercalation as a new matrix for sustained release and the feasibility of using these new nanocomposites as dissolution enhancer.

Oral sustained release nystatin tablets for the treatment of oral candidiasis: formulation development and validation of UV spectrophotometric analytical methodology for content determination.

OBJECTIVE: In this study, oral sustained release mucoadhesive nystatin tablets were developed to increase nystatin contact time with the oral cavity and mask its unpleasant taste. METHODS: The best formulation studied included sustained release agents and it was submitted to physical-mechanical characterization, taste assessment and clinical test in twelve patients. The ultraviolet-visible nystatin methodology was also developed and validated in parallel as an alternative to the pharmacopoeial microbiological dosage method. RESULTS: The best formulation developed in this study included sustained release agents. The efficacy of this formulation was verified through a clinical assessment, showing that this formulation is more effective (100%) than the commercial oral nystatin suspension used traditionally (50%). Moreover, the UV absorption spectrophotometry method developed to validate the methodology for nystatin content analysis for new oral tablets was shown to be specific, linear, exact and reproducible, as recommended by the ICH regulations. CONCLUSION: The oral nystatin tablets developed showed to present faster therapeutic response than the oral aqueous solution through the preliminary clinical assays. The UV absorption spectrophotometry method showed to be an attractive test for the usual routine in the pharmaceutical industry.

Preparation and evaluation of inclusion complexes of commercial sunscreens in cyclodextrins and montmorillonites: performance and substantivity studies.

Herein we describe inclusion complexes of commercial sunscreens in cyclodextrins and montmorillonites to generate new sunscreen derivatives with optimized functional properties such as water resistance and skin adherence. Four cyclodextrins (alpha-, beta-, and gamma-cyclodextrin, and beta-dimethyl cyclodextrin) and two montmorillonites (sodium and alkylammonium) were investigated for encapsulating some commercial sunscreens. Our results reveal a good yield and inclusion products with functional properties obtained by using kneading technique on Eusolex 2292 and Eusolex 6007 in beta-cyclodextrin and solubilization method on Eusolex 6007 and NeoHeliopan MA in montmorillonite. In addition, molecular modeling studies indicated flexibility as important for the intercalation of the host molecule.

Speciation of antimony (III) and antimony (V) using hydride generation for meglumine antimoniate pharmaceutical formulations quality control.

The pentavalent antimonies, mainly the meglumine antimoniate, are recommends as first-choice medicines for leishmaniasis therapy. In this work we described the development of formulations of meglumine antimoniate injectable medication, as well as the analytical methodology used in the selective determination of Sb(III) and Sb(Total) by hydride generation - inductively coupled plasma atomic emission spectrometry (HG-ICP-AES) and ICP-AES, respectively. On that purpose the analytical methodology was developed focusing on the HG-ICP-AES technique. The formulations using propylene glycol/water as vehicles in a 20:80 proportion were more appropriate for subsequent use in industrial scale. These formulations also showed a lower variation on Sb(III) percentage, no need of buffer solution to stabilize the formulation and no influence of the autoclaving in the quality of the product. The results of the development of the analytical methodology point out the proposed method as an efficient alternative for the determination of Sb(III) in the presence of large quantities of Sb(V) in injectable solutions of meglumine antimoniate, in a selective, linear, accurate and precise manner. In addition, the method showed a low limit of quantification, less interference of the matrix, and more resilience than batch techniques proposed in the Brazilian Pharmacopeia.

Avaliação da adequação técnica de indústrias de medicamentos fitoterápicos e oficinais do Estado do Rio de Janeiro / Assessment of the technical adequacy of phytotherapeutics and officinal medicine manufacturers in the State of Rio de Janeiro

Neste trabalho, buscou-se determinar o perfil de indústrias farmacêuticas dedicadas à fabricação e fracionamento de medicamentos fitoterápicos e oficinais no Estado do Rio de Janeiro por informações do CVS-RJ. Foram identificadas 48 empresas com atividades relacionadas à fabricação e/ou fracionamento e distribuição de medicamentos oficinais e fitoterápicos e analisadas no grau de adequação à legislação sanitária vigente, cumprimento de boas práticas de fabricação vigentes, bem como às questões relacionadas ao registro de produtos; as principais irregularidades foram o fluxo de pessoal e controle de qualidade adequado. Constatou-se que há atualmente empresas em situação: satisfatória (29,2 por cento), satisfatórias com restrições (10,4 por cento), insatisfatórias (6,2 por cento), interditadas (39,6 por cento), e solicitantes do cancelamento do processo por não terem condições para o cumprimento da RDC nº 210/03 (14,6 por cento). Segundo o quadro atual, ainda é grande o número de empresas com atividades relacionadas à fabricação e/ou fracionamento e distribuição de medicamentos fitoterápicos e oficinais em fase de adequação ou em condições não adequadas no Rio de Janeiro. Ao mesmo tempo, é pouco factível a adequação, frente ao tipo de produto e porte financeiro, apontando um prognóstico desfavorável para o setor em questão.

In this study we evaluated the current profile of manufacturers of officinal medicines and phytotherapeutics in relation to the Brazilian regulatory legislation. Forty-eight industries involved in manufacture and distribution of officinal medicines and phytotherapeutics were identified in one hundred current administrative processes of the National Health Surveillance Agency in Brazil. The analysis of the inspection reports of these companies considered the first nine months after the implantation of Resolution RDC 210/03 and revealed five specific company profiles: satisfactory (29.2 percent), satisfactory with restrictions (10.4 percent), unsatisfactory (6.2 percent), interdicted (39.6 percent), and applying for cancellation due to lack of conditions for complying with Resolution RDC 210/03 (14.6 percent). The main irregularities found in these companies involved the operational flow, quality control and product registration issues. Our results revealed a great number of companies whose activities are related to the production of officinal medicines and phytotherapeutics but that are still not totally adequate to the industrial park of Rio de Janeiro. The perspectives for the future of this category of industries are thus not favorable because of their difficulties to meet the current requirements.

Speciation of antimony (III) and antimony (V) using hydride generation for meglumine antimoniate pharmaceutical formulationsquality control

The pentavalent antimonies, mainly the meglumine antimoniate, are recommends as first-choice medicines for leishmaniasis therapy. In this work we described the development of formulations of meglumine antimoniate injectable medication, as well as the analytical methodology used in the selective determination of Sb(III) and Sb(Total) by hydride generation - inductively coupled plasma atomic emission spectrometry (HG-ICP-AES) and ICP-AES, respectively. On that purpose the analytical methodology was developed focusing on the HG-ICP-AES technique. The formulations using propylene glycol/water as vehicles in a 20:80 proportion were more appropriate for subsequent use in industrial scale. These formulations also showed a lower variation on Sb(III) percentage, no need of buffer solution to stabilize the formulation and no influence of the autoclaving in the quality of the product. The results of the development of the analytical methodology point out the proposed method as an efficient alternative for the determination of Sb(III) in the presence of large quantities of Sb(V) in injectable solutions of meglumine antimoniate, in a selective, linear, accurate and precise manner. In addition, the method showed a low limit of quantification, less interference of the matrix, and more resilience than batch techniques proposed in the Brazilian Pharmacopeia.

[Assessment of the technical adequacy of phytotherapeutics and officinal medicine manufacturers in the State of Rio de Janeiro]. / Avaliação da adequação técnica de indústrias de medicamentos fitoterápicos e oficinais do Estado do Rio de Janeiro.

In this study we evaluated the current profile of manufacturers of officinal medicines and phytotherapeutics in relation to the Brazilian regulatory legislation. Forty-eight industries involved in manufacture and distribution of officinal medicines and phytotherapeutics were identified in one hundred current administrative processes of the National Health Surveillance Agency in Brazil. The analysis of the inspection reports of these companies considered the first nine months after the implantation of Resolution RDC 210/03 and revealed five specific company profiles: satisfactory (29.2%), satisfactory with restrictions (10.4%), unsatisfactory (6.2%), interdicted (39.6%), and applying for cancellation due to lack of conditions for complying with Resolution RDC 210/03 (14.6%). The main irregularities found in these companies involved the operational flow, quality control and product registration issues. Our results revealed a great number of companies whose activities are related to the production of officinal medicines and phytotherapeutics but that are still not totally adequate to the industrial park of Rio de Janeiro. The perspectives for the future of this category of industries are thus not favorable because of their difficulties to meet the current requirements.