Towards Virtual Bioequivalence Studies for Oral Dosage Forms Containing Poorly Water-Soluble Drugs: A Physiologically Based Biopharmaceutics Modeling (PBBM) Approach.

The objective of the present study was to develop a physiologically based biopharmaceutics (PBBM) approach to predict the bioequivalence of dosage forms containing poorly soluble drugs. Aripiprazole and enzalutamide were used as model drugs. Variations in the gastrointestinal (GI) physiological parameters of fasted humans were taken into consideration in in vitro biorelevant dissolution testing and in an in silico PBBM simulations. To estimate bioequivalence between dosage forms, the inter-individual variabilities in their performance in virtual human subjects were predicted from the in vitro studies and variability in e.g. gastric emptying and fluid volume in the stomach was also taken into account. Formulations with different in vitro dissolution performance, a solution and a tablet formulation, were used in order to evaluate the accuracy of bioequivalence prediction using the PBBM approach. The bioequivalence parameters, i.e. geometric mean ratio and 90% confidence interval, for both drugs were predicted well in the virtual studies. In order to achieve even more precise predictions, it will be important to continue characterizing GI physiological parameters, along with their variabilities, on both an inter-subject and inter-occasion basis.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Carbamazepine.

Literature relevant to assessing whether BCS-based biowaivers can be applied to immediate release (IR) solid oral dosage forms containing carbamazepine as the single active pharmaceutical ingredient are reviewed. Carbamazepine, which is used for the prophylactic therapy of epilepsy, is a non-ionizable drug that cannot be considered "highly soluble" across the range of pH values usually encountered in the upper gastrointestinal tract. Furthermore, evidence in the open literature suggests that carbamazepine is a BCS Class 2 drug. Nevertheless, the oral absolute bioavailability of carbamazepine lies between 70 and 78% and both in vivo and in vitro data support the classification of carbamazepine as a highly permeable drug. Since the therapeutic and toxic plasma level ranges overlap, carbamazepine is considered to have a narrow therapeutic index. For these reasons, a BCS based biowaiver for IR tablets of carbamazepine cannot be recommended. Interestingly, in nine out of ten studies, USP dissolution conditions (900 mL water with 1% SLS, paddle, 75 rpm) appropriately discriminated among bioinequivalent products and this may be a way forward to predicting whether a given formulation will be bioequivalent to the comparator product.

Biowaiver Monographs for Immediate Release Solid Oral Dosage Forms: Metformin Hydrochloride.

Data are examined regarding possible waiver of in vivo bioequivalence testing (i.e. biowaiver) for approval of metformin hydrochloride (metformin) immediate-release solid oral dosage forms. Data include metformin's Biopharmaceutics Classification System (BCS) properties, including potential excipient interactions. Metformin is a prototypical transporter-mediated drug and is highly soluble, but only 50% of an orally administered dose is absorbed from the gut. Therefore, metformin is a BCS Class III substance. A BCS-based approval approach for major changes to marketed products and new generics is admissible if test and reference dosage forms have the identical active pharmaceutical ingredient and if in vitro dissolution from both are very rapid (i.e. at least 85% within 15 min at pH 1.2, 4.5, and 6.8). Recent International Council for Harmonisation BCS guidance indicates all excipients for Class III biowaivers are recommended to be qualitatively the same and quantitatively similar (except for preservatives, flavor agents, colorant, or capsule shell or film coating excipients). However, despite metformin being a prototypical transporter-mediated drug, there is no evidence that commonly used excipients impact metformin absorption, such that this restriction on excipients for BCS III drugs merits regulatory relief. Commonly used excipients in usual amounts are not likely to impact metformin absorption.

The use of PBPK/PD to establish clinically relevant dissolution specifications for zolpidem immediate release tablets.

BACKGROUND: Zolpidem is a non-benzodiazepine hypnotic agent which has been shown to be effective in inducing and maintaining sleep in adults and is one of the most frequently prescribed hypnotics in the world. For drugs that are used to treat sleeping disorders, the time to reach the maximum concentration (Tmax) of the drug in plasma is important to achieving a fast onset of action and this must be maintained when switching from one product to another. OBJECTIVES: The main objective of the present work was to create a PBPK/PD model for zolpidem and establish a clinically relevant "safe space" for dissolution of zolpidem from the commercial immediate release (IR) formulation. A second objective was to analyze literature pharmacokinetic data to verify the negative food effect ascribed to zolpidem and consider its ramifications in terms of the "safe space" for dissolution. METHODS: Using dissolution, pharmacokinetic and pharmacodynamic data, an integrated PBPK/PD model for immediate release zolpidem tablets was constructed in Simcyp®. This model was used to identify the clinically relevant dissolution specifications necessary to ensure efficacy. RESULTS: According to the simulations, as long as 85% of the drug is released in 45 minutes or less, the impact on the PK and PD profiles of zolpidem would be minimal. According to the FDA, the drug has to dissolve from the test and reference products at a similar rate and to an extent of 85% in not more than 30 minutes to pass bioequivalence via the BCS-biowaiver test. Thus, the BCS-biowaiver specifications are somewhat more stringent than the "safe space" based on the PBPK/PD model. Published data from fasted and fed state pharmacokinetic studies suggest but do not prove a negative food effect of zolpidem. CONCLUSIONS: A PBPK/PD model indicates that current BCS-biowaiver criteria are more restrictive for immediate release zolpidem tablets than they need to be. In view of the close relationship between PK and PD, it remains advisable to avoid taking zolpidem tablets with or immediately after a meal, as indicated by the Stilnox® labeling.

Opportunities for Successful Stabilization of Poor Glass-Forming Drugs: A Stability-Based Comparison of Mesoporous Silica Versus Hot Melt Extrusion Technologies.

Amorphous formulation technologies to improve oral absorption of poorly soluble active pharmaceutical ingredients (APIs) have become increasingly prevalent. Currently, polymer-based amorphous formulations manufactured by spray drying, hot melt extrusion (HME), or co-precipitation are most common. However, these technologies have challenges in terms of the successful stabilization of poor glass former compounds in the amorphous form. An alternative approach is mesoporous silica, which stabilizes APIs in non-crystalline form via molecular adsorption inside nano-scale pores. In line with these considerations, two poor glass formers, haloperidol and carbamazepine, were formulated as polymer-based solid dispersion via HME and with mesoporous silica, and their stability was compared under accelerated conditions. Changes were monitored over three months with respect to solid-state form and dissolution. The results were supported by solid-state nuclear magnetic resonance spectroscopy (SS-NMR) and scanning electron microscopy (SEM). It was demonstrated that mesoporous silica was more successful than HME in the stabilization of the selected poor glass formers. While both drugs remained non-crystalline during the study using mesoporous silica, polymer-based HME formulations showed recrystallization after one week. Thus, mesoporous silica represents an attractive technology to extend the formulation toolbox to poorly soluble poor glass formers.

A novel in vivo predictive dissolution testing coupled with a modeling and simulation for hydrogel matrix monolithic extended release oral dosage forms.

The objective of this research was to design a novel in vitro dissolution testing for hydrogel matrix monolithic extended release tablets, in which physiologically relevant conditions of swelling, stress, and erosion for the tablets in the fasted gastrointestinal tract are taken into consideration. Mirabegron extended release tablets (three variations) were used as model formulations in this research. In in vitro dissolution testing, the tablets were allowed to swell in 10 mL of dissolution medium, after which they were stressed under a pressure of ca. 300 g/cm2 and then allowed to erode in a very limited volume of intestinal fluid. The drug release results from this in vitro test were coupled with in silico modeling and simulation to predict individual plasma concentration profiles after oral administration of the extended release tablets to beagle dogs. The results of the in silico simulations indicated that the proposed approach is able to predict in vivo performance of the hydrogel matrix monolithic extended release tablets in individualized simulations.

The Discriminatory Power of the BCS-Based Biowaiver: A Retrospective With Focus on Essential Medicines.

This article summarizes historic developments, recent expert opinions, and (currently) unresolved challenges concerning the Biopharmaceutics Classification System (BCS)-based Biowaiver. An overview of approval statistics and application potential, case examples addressing the discriminatory power of the procedure, as well as an outlook on possible refinements in the future are provided and critically discussed. Over the last decade, regulatory guidance documents have been harmonized, for example, following scientific consent on allowing biowaivers for BCS class III drugs, making over 50% of orally administered drugs on the World Health Organization Essential Medicines List eligible for an abbreviated approval. Biowaiver monographs that present a complete risk-benefit evaluation for individual drugs have been issued by the International Pharmaceutical Federation for more than 25% of those drugs with the long-range aim of covering all essential drugs. Unresolved issues that have emerged from reported examples of false-negative and false-positive outcomes in the literature demand further adjustments to the regulatory requirements. Possible solutions for resolving these issues are the use of modeling and simulation and refined biorelevant in vitro tests that are better able to discriminate between dosage forms with unequal performance in vivo, potentially allowing biowaivers for selected BCS II drugs.

PBPK modeling coupled with biorelevant dissolution to forecast the oral performance of amorphous solid dispersion formulations.

The aim of this research was to develop an in silico modeling and simulation approach to predict the oral performance of a poorly soluble drug candidate, T2CP, formulated as an amorphous solid dispersion and an amorphous powder. The dissolution and precipitation profiles of T2CP of the two amorphous formulations were evaluated in biorelevant media using USP 2 paddle apparatus. Three equations, the Noyes-Whitney equation for dissolution and separate equations describing nucleation and crystal growth, were fitted simultaneously to the in vitro profiles to estimate the dissolution and precipitation parameters for each formulation. The in silico prediction model for the amorphous formulations was designed using STELLA Professional software and the simulated profiles were compared with the observed plasma profiles in dogs. The STELLA model was able to describe the complex characteristics of in vitro dissolution and precipitation of the amorphous formulations well. The predicted plasma concentration profiles using the estimated dissolution and precipitation parameters of the two amorphous formulations were close to the profiles observed in dogs. This research paves the way for further application of biorelevant in vitro methods in combination with in silico tools to mechanistically forecast the in vivo performance of enhanced formulations.

Approaches to increase mechanistic understanding and aid in the selection of precipitation inhibitors for supersaturating formulations - a PEARRL review.

OBJECTIVES: Supersaturating formulations hold great promise for delivery of poorly soluble active pharmaceutical ingredients (APIs). To profit from supersaturating formulations, precipitation is hindered with precipitation inhibitors (PIs), maintaining drug concentrations for as long as possible. This review provides a brief overview of supersaturation and precipitation, focusing on precipitation inhibition. Trial-and-error PI selection will be examined alongside established PI screening techniques. Primarily, however, this review will focus on recent advances that utilise advanced analytical techniques to increase mechanistic understanding of PI action and systematic PI selection. KEY FINDINGS: Advances in mechanistic understanding have been made possible by the use of analytical tools such as spectroscopy, microscopy and mathematical and molecular modelling, which have been reviewed herein. Using these techniques, PI selection can be guided by molecular rationale. However, more work is required to see widespread application of such an approach for PI selection. SUMMARY: Precipitation inhibitors are becoming increasingly important in enabling formulations. Trial-and-error approaches have seen success thus far. However, it is essential to learn more about the mode of action of PIs if the most optimal formulations are to be realised. Robust analytical tools, and the knowledge of where and how they can be applied, will be essential in this endeavour.

Predicting the Changes in Oral Absorption of Weak Base Drugs Under Elevated Gastric pH Using an In Vitro-In Silico-In Vivo Approach: Case Examples-Dipyridamole, Prasugrel, and Nelfinavir.

The aim of the current research was to develop an in silico oral absorption model coupled with an in vitro dissolution/precipitation testing to predict gastric pH-dependent drug-drug interactions for weakly basic drugs. The effects of elevated gastric pH on the plasma profiles of dipyridamole, prasugrel, and nelfinavir were simulated and compared with pharmacokinetic data reported in humans with or without use of proton pump inhibitors or histamine H2 receptor antagonists. The in vitro dissolution and precipitation data for the weakly basic drugs in biorelevant media were obtained using paddle apparatus. An in silico prediction model based on the STELLA software was designed and simulations were conducted to predict the oral pharmacokinetic profiles of the 3 drugs under both usual (low) and elevated gastric pH conditions. The changes in oral absorption of dipyridamole and prasugrel in subjects with elevated gastric pH compared with those with low stomach pH were predicted well using the in vitro-in silico-in vivo approach. The proposed approach could become a powerful tool in the formulation development of poorly soluble weak base drugs.

In vitro methods to assess drug precipitation in the fasted small intestine - a PEARRL review.

OBJECTIVES: Drug precipitation in vivo poses a significant challenge for the pharmaceutical industry. During the drug development process, the impact of drug supersaturation or precipitation on the in vivo behaviour of drug products is evaluated with in vitro techniques. This review focuses on the small and full scale in vitro methods to assess drug precipitation in the fasted small intestine. KEY FINDINGS: Many methods have been developed in an attempt to evaluate drug precipitation in the fasted state, with varying degrees of complexity and scale. In early stages of drug development, when drug quantities are typically limited, small-scale tests facilitate an early evaluation of the potential precipitation risk in vivo and allow rapid screening of prototype formulations. At later stages of formulation development, full-scale methods are necessary to predict the behaviour of formulations at clinically relevant doses. Multicompartment models allow the evaluation of drug precipitation after transfer from stomach to the upper small intestine. Optimisation of available biopharmaceutics tools for evaluating precipitation in the fasted small intestine is crucial for accelerating the development of novel breakthrough medicines and reducing the development costs. SUMMARY: Despite the progress from compendial quality control dissolution methods, further work is required to validate the usefulness of proposed setups and to increase their biorelevance, particularly in simulating the absorption of drug along the intestinal lumen. Coupling results from in vitro testing with physiologically based pharmacokinetic modelling holds significant promise and requires further evaluation.

Effects of medicines used to treat gastrointestinal diseases on the pharmacokinetics of coadministered drugs: a PEARRL Review.

OBJECTIVES: Drugs used to treat gastrointestinal diseases (GI drugs) are widely used either as prescription or over-the-counter (OTC) medications and belong to both the 10 most prescribed and 10 most sold OTC medications worldwide. The objective of this review article is to discuss the most frequent interactions between GI and other drugs, including identification of the mechanisms behind these interactions, where possible. KEY FINDINGS: Current clinical practice shows that in many cases, these drugs are administered concomitantly with other drug products. Due to their metabolic properties and mechanisms of action, the drugs used to treat gastrointestinal diseases can change the pharmacokinetics of some coadministered drugs. In certain cases, these interactions can lead to failure of treatment or to the occurrence of serious adverse events. The mechanism of interaction depends highly on drug properties and differs among therapeutic categories. Understanding these interactions is essential to providing recommendations for optimal drug therapy. SUMMARY: Interactions with GI drugs are numerous and can be highly significant clinically in some cases. While alterations in bioavailability due to changes in solubility, dissolution rate, GI transit and metabolic interactions can be (for the most part) easily identified, interactions that are mediated through other mechanisms, such as permeability or microbiota, are less well-understood. Future work should focus on characterising these aspects.

Past, Present, and Future of Bioequivalence: Improving Assessment and Extrapolation of Therapeutic Equivalence for Oral Drug Products.

The growth in the utilization of systems thinking principles has created a paradigm shift in the regulatory sciences and drug product development. Instead of relying extensively on end product testing and one-size-fits-all regulatory criteria, this new paradigm has focused on building quality into the product by design and fostering the development of product-specific, clinically relevant specifications. In this context, this commentary describes the evolution of bioequivalence regulations up to the current day and discusses the potential of applying a Bayesian-like approach, considering all relevant prior knowledge, to guide regulatory bioequivalence decisions in a patient-centric environment.

Biowaiver Monographs for Immediate Release Solid Oral Dosage Forms: Proguanil Hydrochloride.

Literature data relevant to the decision to waive in vivo bioequivalence testing for the approval of generic immediate release solid oral dosage forms of proguanil hydrochloride are reviewed. To elucidate the Biopharmaceutics Classification System (BCS) classification, experimental solubility and dissolution studies were also carried out. The antimalarial proguanil hydrochloride, effective via the parent compound proguanil and the metabolite cycloguanil, is not considered to be a narrow therapeutic index drug. Proguanil hydrochloride salt was shown to be highly soluble according to the U.S. Food and Drug Administration, World Health Organization, and European Medicines Agency guidelines, but data for permeability are inconclusive. Therefore, proguanil hydrochloride is conservatively classified as a BCS class 3 substance. In view of this information and the assessment of risks associated with a false positive decision, a BCS-based biowaiver approval procedure can be recommended for orally administered solid immediate release products containing proguanil hydrochloride, provided well-known excipients are used in usual amounts and provided the in vitro dissolution of the test and reference products is very rapid (85% or more are dissolved in 15 min at pH 1.2, 4.5, and 6.8) and is performed according to the current requirements for BCS-based biowaivers.

Solubility Determination of Active Pharmaceutical Ingredients Which Have Been Recently Added to the List of Essential Medicines in the Context of the Biopharmaceutics Classification System-Biowaiver.

Since the publication of Lindenberg et al., which classified orally administered active pharmaceutical ingredients (APIs) on the 2004 Essential Medicines List (EML) of the World Health Organization according to the Biopharmaceutics Classification System (BCS), various APIs have been added to the EML. In this work, BCS classifications for 16 of the orally administered APIs which were added to the EML after 2004 were determined. To establish a reliable solubility classification for all these compounds, a miniaturized shake-flask method was introduced. This method enables a fast, economical determination of the BCS solubility class while reliably discriminating between "highly soluble" and "not highly soluble" compounds. Nine of the 16 APIs investigated were classified as "highly soluble" compounds, making them potential candidates for an approval of multisource drug products via the BCS-based biowaiver procedure. The choice of dose definition (which currently varies among the guidances pertaining to BCS-based bioequivalence published by various regulatory authorities) had no effect on the solubility classification of any of the 16 substances evaluated. BCS classification of the compounds was then completed using permeability data obtained from the literature. As several APIs decomposed at one or more pH values, a decision tree for determining their solubility was established.

Biowaiver Monographs for Immediate-Release Solid Oral Dosage Forms: Folic Acid.

This work presents a review of literature and experimental data relevant to the possibility of waiving pharmacokinetic bioequivalence studies in human volunteers for approval of immediate-release solid oral pharmaceutical forms containing folic acid as the single active pharmaceutical ingredient. For dosage forms containing 5 mg folic acid, the highest dose strength on the World Health Organization Essential Medicines List, the dose/solubility ratio calculated from solubility studies was higher than 250 mL, corresponding to a classification as "not highly soluble." Small, physiological doses of folic acid (≤320 µg) seem to be absorbed completely via active transport, but permeability data for higher doses of 1-5 mg are inconclusive. Following a conservative approach, folic acid is classified as a Biopharmaceutics Classification System class IV compound until more reliable data become available. Commensurate with its solubility characteristics, the results of dissolution studies indicated that none of the folic acid products evaluated showed rapid dissolution in media at pH 1.2 or 4.5. Therefore, according to the current criteria of the Biopharmaceutics Classification System, the biowaiver approval procedure cannot be recommended for immediate-release solid oral dosage forms containing folic acid.

Mesoporous silica-based dosage forms improve bioavailability of poorly soluble drugs in pigs: case example fenofibrate.

OBJECTIVES: Mesoporous silicas (SLC) have demonstrated considerable potential to improve bioavailability of poorly soluble drugs by facilitating rapid dissolution and generating supersaturation. The addition of certain polymers can further enhance the dissolution of these formulations by preventing drug precipitation. This study uses fenofibrate as a model drug to investigate the performance of an SLC-based formulation, delivered with hydroxypropyl methylcellulose acetate succinate (HPMCAS) as a precipitation inhibitor, in pigs. The ability of biorelevant dissolution testing to predict the in vivo performance was also assessed. KEY FINDINGS: Fenofibrate-loaded mesoporous silica (FF-SLC), together with HPMCAS, displayed significant improvements in biorelevant dissolution tests relative to a reference formulation consisting of a physical mixture of crystalline fenofibrate with HPMCAS. In vivo assessment in fasted pigs demonstrated bioavailabilities of 86.69 ± 35.37% with combination of FF-SLC and HPMCAS in capsule form and 75.47 ± 14.58% as a suspension, compared to 19.92 ± 9.89% with the reference formulation. A positive correlation was identified between bioavailability and dissolution efficiency. CONCLUSIONS: The substantial improvements in bioavailability of fenofibrate from the SLC-based formulations confirm the ability of this formulation strategy to overcome the dissolution and solubility limitations, further raising the prospects of a future commercially available SLC-based formulation.

Forecasting gastrointestinal precipitation and oral pharmacokinetics of dantrolene in dogs using an in vitro precipitation testing coupled with in silico modeling and simulation.

The aim of the current research was to determine the precipitation kinetics of dantrolene sodium using canine biorelevant in vitro testing and to model the precipitation kinetics by appropriately coupling the data with an in silico tool adapted for dogs. The precipitation profiles of dantrolene sodium solutions were obtained with the in vitro paddle apparatus at a revolution rate of 50rpm. The in silico prediction tool was designed using STELLA software and the predicted plasma concentration profiles of dantrolene using the in vitro precipitation data were compared with the observed in vivo pharmacokinetics in beagle dogs. The plasma profiles of dantrolene, which served as a model weakly acidic drug which precipitates in the upper gastrointestinal tract, was successfully predicted using the in vitro precipitation testing coupled with the in silico modeling and simulation approach. The approach was subsequently used to forecast the effect of pharmaceutical excipients (HPMC/PG) on the ability of the drug to supersaturate in the gut and the resulting pharmacokinetics. The agreement of the simulated pharmacokinetics with the observed values confirms the ability of canine biorelevant media to predict oral performance of enhanced dosage forms in dogs.

Biowaiver Monographs for Immediate-Release Solid Oral Dosage Forms: Enalapril.

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence testing for the marketing authorization of immediate-release, solid oral dosage forms containing enalapril maleate are reviewed. Enalapril, a prodrug, is hydrolyzed by carboxylesterases to the active angiotensin-converting enzyme inhibitor enalaprilat. Enalapril as the maleate salt is shown to be highly soluble, but only 60%-70% of an orally administered dose of enalapril is absorbed from the gastrointestinal tract into the enterocytes. Consequently, enalapril maleate is a Biopharmaceutics Classification System class III substance. Because in situ conversion of the maleate salt to the sodium salt is sometimes used in production of the finished drug product, not every enalapril maleate-labeled finished product actually contains the maleate salt. Enalapril is not considered to have a narrow therapeutic index. With this background, a biowaiver-based approval procedure for new generic products or after major revisions to existing products is deemed acceptable, provided the in vitro dissolution of both test and reference preparation is very rapid (at least 85% within 15 min at pH 1.2, 4.5, and 6.8). Additionally, the test and reference product must contain the identical active drug ingredient.