RESUMEN
Wavelength-tunable orbital angular momentum (OAM) lasers with controllable topological charges have the potential for serving as light sources for large-capacity optical communication by combining conventional wavelength division multiplexing (WDM) with OAM mode-division multiplexing (OAM-MDM). In this study, we demonstrate a wavelength-tunable Tm-bulk laser that can control OAM states in the 2-µm spectral range. The excitation conditions for different Laguerre-Gaussian (L G 0,l ) modes in a bulk laser cavity are theoretically determined by measuring the spatial propagation dynamics of the annular pump beam. As a proof-of-principle study, we experimentally generate OAM states of |â| and |2â| from a T m:Y 2 O 3 ceramic laser with a tunable emission wavelength using a Lyot filter (LF). The spatial properties of the scalar optical vortices are well conserved during wavelength tuning, indicating the feasibility of our approach for producing wavelength-tunable structured light. These OAM laser sources, which are characterized by their robustness and compactness, have potential applications in various areas such as optical communications, quantum optics, super-resolution microscopes, and more.
RESUMEN
Background: The incidence of heart failure, the terminal stage of several cardiovascular diseases, is increasing owing to population growth and aging. Bidirectional crosstalk between the gut and heart plays a significant role in heart failure. This study aimed to analyze the gut-heart axis and heart failure from a bibliometric perspective. Methods: We extracted literature regarding the gut-heart axis and heart failure from the Web of Science Core Collection database (January 1, 1993, to June 30, 2023) and conducted bibliometric and visualization analyses using Microsoft Excel, CiteSpace, VOSviewer, and the R package "bibliometrix." Results: The final analysis included 1646 articles with an average of 35.38 citations per article. Despite some fluctuations, the number of articles published per year has steadily increased over the past 31 years, particularly since 2018. A total of 9412 authors from 2287 institutions in 86 countries have contributed to this field. The USA and China have been the most productive countries, with the Cleveland Clinic in the USA and Charité-Universitätsmedizin Berlin in Germany being the most active institutions. The cooperation between countries/regions and institutions was relatively close. Professor Tang WHW was the most productive author in the field and the journal Shocks published the highest number of articles. "Heart failure," "gut microbiota," "trimethylamine N-oxide," and "inflammation" were the most common keywords, representing the current research hotspots. The keyword burst analysis indicated that "gut microbiota" and "short-chain fatty acids" are the current frontier research topics in this field. Conclusion: Research on the gut-heart axis and heart failure is increasing. This bibliometric analysis indicated that the mechanisms associated with the gut-heart axis and heart failure, particularly the gut microbiota, trimethylamine N-oxide, inflammation, and short-chain fatty acids, will become hotspots and emerging trends in research in this field. These findings provide valuable insights into current research and future directions.
RESUMEN
Polymer mechanochemistry has been established as an enabling tool in accessing chemical reactivity and reaction pathways that are distinctive from their thermal counterparts. However, eliciting diversified reaction pathways by activating different constituent chemical bonds from the same mechanophore structure remains challenging. Here, we report the design of a bicyclo[2.2.0]hexene (BCH) mechanophore to leverage its structural simplicity and relatively low molecular symmetry to demonstrate this idea of multimodal activation. Upon changing the attachment points of pendant polymer chains, three different C-C bonds in bicyclo[2.2.0]hexene are specifically activated via externally applied force by sonication. Experimental characterization confirms that in different scenarios of polymer attachment, the regioisomers of BCH undergo different activation reactions, entailing retro-[2+2] cycloreversion, 1,3-allylic migration, and retro-4π ring-opening reactions, respectively. Control experiments with small-molecule analogues reveal that the observed diversified reactivity of BCH regioisomers is possible only with mechanical force. Theoretical studies further elucidate that the differences in the positions of substitution between regioisomers have a minimal impact on the potential energy surface of the parent BCH scaffold. The mechanochemical selectivity between different C-C bonds in each constitutional isomer is a result of selective and effective coupling of force to the aligned C-C bond in each case.
RESUMEN
Poly(disulfide)s are an emerging class of sulfur-containing polymers with applications in medicine, energy, and functional materials. However, the constituent dynamic covalent S-S bond is highly reactive in the presence of the sulfide (RS-) anion, imposing a persistent challenge to control the polymerization. Here, we report an anion-binding approach to arrest the high reactivity of the RS- chain end to control the synthesis of linear poly(disulfide)s, realizing a rapid, living ring-opening polymerization of 1,2-dithiolanes with narrow dispersity and high regioselectivity (Mw/Mn â¼ 1.1, Ps â¼ 0.85). Mechanistic studies support the formation of a thiourea-base-sulfide ternary complex as the catalytically active species during the chain propagation. Theoretical analyses reveal a synergistic catalytic model where the catalyst preorganizes the protonated base and anionic chain end to establish spatial confinement over the bound monomer, effecting the observed regioselectivity. The catalytic system is amenable to monomers with various functional groups, and semicrystalline polymers are also obtained from lipoic acid derivatives by enhancing the regioselectivity.
RESUMEN
Background: Previous findings have indicated that elevated low-density lipoprotein cholesterol (LDL-C) and remnant cholesterol (RC) are associated with hypertension. We aim to explore whether higher RC levels may be associated with hypertension beyond LDL-C in the general US adult population. Methods: This study included 10,842 adults from the National Health and Nutrition Examination Survey (NHANES) 1999-2018. Weighted multivariable logistic regression models were used to estimate the odds ratios (ORs) of hypertension for LDL-C and RC. We also performed analyses examining the association between hypertension and LDL-C vs. RC concordant/discordant groups. Results: A total of 4,963 (41.54%, weighted) individuals had hypertension. The weighted median levels were LDL-C: 118mg/dL, RC: 20mg/dL. At lower LDL-C clinical cut-point, the proportion of discordantly high RC dramatically increased. After multivariable adjustment, log RC was associated with higher prevalence of hypertension [OR 2.54, 95% confidence interval (CI) 2.17-2.99]. Participants with the highest tertile of RC were more likely to have hypertension (OR 2.18; 95% CI 1.89-2.52) compared with those with the lowest tertile of RC. This association remained marked after including body mass index (BMI), LDL-C, high-density lipoprotein cholesterol (HDL-C) or triglycerides. The association between LDL-C and hypertension was absent after adjusting for BMI, RC or triglycerides. Compared with low LDL-C/low RC group, the discordant low LDL-C/high RC group was associated with hypertension (OR 2.04; 95% CI 1.72-2.42), whereas the high LDL-C/low RC group was not, regardless of BMI, HDL-C or triglycerides. Similar results were observed when examining discordance among different clinical cut-points, except for the cut-point of LDL-C 70 mg/dL and RC 13 mg/dL. To better understand the association, we performed an additional analysis, which showed that among participants with apolipoprotein B < median (92mg/dL), those with discordant RC ≥ median (20mg/dL) had significantly higher odds of having hypertension (OR 1.73; 95% CI 1.38-2.17). Conclusion: RC was associated with hypertension beyond LDL-C in the general US adult population. This association went beyond increased triglycerides levels, and lipoproteins other than apoB may be involved.
Asunto(s)
Hiperlipidemias , Hipertensión , Adulto , Humanos , LDL-Colesterol , Encuestas Nutricionales , Colesterol , HDL-Colesterol , Triglicéridos , Hipertensión/epidemiología , Apolipoproteínas BRESUMEN
We report on a simple method for reduction of the depolarization loss in an end-pumped Tm:Y2O3 ceramic laser by using a near-field ring-shaped pump beam. Initially, we theoretically derive the expression of the depolarization loss in a bulk laser end-pumped with a near-field flat-top-hat or ring-shaped beam, where a significant reduction of depolarization loss in the latter case is presented. Experimental verification is thereafter carried out with a Tm:Y2O3 ceramic laser employing these two different pump configurations. It shows that the experimentally measured depolarization losses are close to the simulated values; the loss in the case of the annular-beam pump is almost 18 times lower than that with a quasi-top-hat beam at a same absorption pump power of 7.4 W. This work, as a proof-of-principle study, indicates that depolarization loss in the end-pumped bulk lasers can be significantly reduced simply by using a ring-shaped pump beam.
RESUMEN
Background: This study evaluated the analgesic efficacy and psychological response of low-temperature plasma ablation of dorsal root ganglion (DRG) combined with selective spinal nerve block in patients with acute or subacute zoster-related neuralgia (ZRN). Methods: Totally 90 ZRN patients were randomly and evenly divided into three groups. Treatment was given to Group A using C arm-guided selective spinal nerve block (C-SSVB), Group B using C-SSVB and pulsed radiofrequency (PRF), and Group C using C-SSVB and low-temperature plasma ablation of the DRG. The outcomes were examined using the Visual Analog Scale (VAS). Anxiety and depression of patients were evaluated using the Self-rating Anxiety Scale (SAS) and Self-rating Depression Scale (SDS). Quality of life was assessed using the Pittsburgh Sleep Quality Index (PSQI) and postoperative Satisfaction scale. In addition, data on adverse events and medication usage rates were collected. Results: The 90 patients were eligible for this study. The three treatments reduced VAS scores with no significant difference between groups A and B at the same time points; however, group B tended to have numerically lower VAS scores. Comparatively, group C had significantly reduced VAS scores on day 1 and 1 month after treatment compared with the other two groups. In terms of the decreasing SAS, SDS and PSQI scores, all the three treatments improved the anxiety, depression and sleep quality of the patients. In addition, significant alleviation in anxiety was found in group C compared with group A at all- time points. However, there was no statistically significant difference among the three groups in treatment-related adverse events that mainly focused on puncture pain at the surgical-site, skin numbness and medication usage rates. Conclusions: C-SSVB and LTPRA of DRG will be considered as a promising treatment option for ZRN patients if those results can be confirmed after further validation.
RESUMEN
Reduction of thermal effects is a challenging aspect for power scaling of 2.7-µm bulk Er-lasers due to the large quantum defect when pumping at â¼ 0.97 µm. Here, we demonstrate that thermal effects in an Er:Y2O3 ceramic laser can be significantly reduced pumping by an annular beam, thus improving the continuous-wave (CW) laser performance in the 3-µm spectral range. The excitation conditions of the TEM00 mode were determined theoretically by taking into account the propagation characteristics of the annular pump beam. For a comparison, the temperature and stress distributions are at first theoretically studied with three different pump configurations. In the experiment, output power of the Er:Y2O3 ceramic laser improved by â¼ 60% by changing the pump beam from coventional quasi-top-hat to a designed annular one. This work, as a proof-of-principle study, indicates the potential of power scaling of the 2.7-µm bulk Er-lasers pumping with an annular beam.
RESUMEN
Spatial or temporal specific gene knockout system is a valuable tool for studying the molecular mechanisms underlying developmental processes. The integument is essential for insect fitness and survival, but tools for dissecting function of genes in this tissue are lacking. In this study, we firstly identified an epidermis specifically expressed gene of the domesticated silkworm, BmCPG25, by comparative transcriptomic analysis. Furthermore, a transgenic silkworm expressing the RNA dependent CRISPR-Cas9 protein driven by the regulatory region of the BmCPG25 was established. Immunochemistry analysis showed the endonuclease was specifically expressed in the nuclear of epidermal cells. We also validated the efficiency of this system by disrupting the function of an epidermis specifically expressed cuticular protein gene (Cpr21) and a ubiquitously expressed cuticular gene (Cph18), respectively. In summary, we successfully constructed a conditional knockout toolkit to manipulate the gene editing in epidermal cells, which provides a valuable approach to study the molecular mechanism of integument development.
Asunto(s)
Bombyx , Animales , Bombyx/genética , Sistemas CRISPR-Cas , Edición Génica , Epidermis , Células EpidérmicasRESUMEN
Malt is an important raw material in brewing beer. With the increasing development of craft beer, brewing malt has contributed diverse colours and abundant flavours to beer. While "malty" and "worty" were commonly used to describe the malt flavour of beer, they are still inadequate. This study focused on developing of a sensory lexicon and a sensory wheel for brewing malt. Here, a total of 22 samples were used for sensory evaluation. The panels identified 53 attributes to form the lexicon of brewing malt, including appearance, flavour, taste, and mouthfeel. After consulting with the experts from the brewing industry, 46 attributes were selected from the lexicon list to construct the sensory wheel. Based on the lexicon, rate-all-that-apply analysis was used to discriminate between six samples of different malt types. The principal component analysis results showed that malt types were significantly correlated with sensory features. To further understand the chemical origin of sensory attributes, partial least squares regression analysis was used to determine the association between the aroma compounds and sensory attributes. According to the colour range and malt types, 18 samples were used for sensory descriptive analysis and volatile compounds identification. Seven main flavours were selected from the brewing malt sensory wheel. 34 aroma compounds were identified by headspace solid phase microextraction gas chromatography-mass spectrometry-olfactometry. According to the partial least squares regression results, the aroma compounds were highly correlated with the sensory attributes of the brewing malt. This approach may have practical applications in the sensory studies of other products.