"DSN-mismatched CRISPR″sensor for highly selective and sensitive detection of under-expressed miR-let-7a.

Several microRNAs (miRNAs) are expressed at lower levels in specific tumors, e.g., miR-let-7a in non-small cell lung cancer (NSCLC). This makes it challenging to analyze their lower abundance versus specifically elevated miRNAs. Here, we describe a novel fluorescent biosensor for the highly selective and sensitive detection of miR-let-7a constructed by combining miRNA screening assisted by a duplex-specific nuclease (DSN) with CRISPR-Cas12a system signal amplification. We meticulously designed a mismatch in the first three to four bases at the 5'-end of the capture DNA to improve the signal-to-noise ratio of the CRISPR-Cas12a system. Within this "DSN-mismatched CRISPR" fluorescence strategy, miR-let-7a was accurately screened by DSN-assisted cleavage, and the mismatched capture DNA unbound to target miRNA could trigger the CRISPR-Cas12a system to produce a mass of trans-cleave fluorescence signals. This "turn-off" approach was suitable for detecting decreased levels of miRNAs. This approach can not only discriminate the single-base mismatched let-7 family but also reach a limit of detection at 64.17 fM as well as be quantified from 100 fM to 500 pM. The miR-let-7a levels were then measured in clinical serum samples from healthy volunteers and patients with NSCLC. This study holds promise for the development of a universal under-expressed miRNA assay for early diagnosis and treatment of cancers.

Stimulation of ATP Hydrolysis by ssDNA Provides the Necessary Mechanochemical Energy for G4 Unfolding.

The G-quadruplex (G4) is a distinct geometric and electrophysical structure compared to classical double-stranded DNA, and its stability can impede essential cellular processes such as replication, transcription, and translation. This study focuses on the BsPif1 helicase, revealing its ability to bind independently to both single-stranded DNA (ssDNA) and G4 structures. The unfolding activity of BsPif1 on G4 relies on the presence of a single tail chain, and the covalent continuity between the single tail chain and the G4's main chain is necessary for efficient G4 unwinding. This suggests that ATP hydrolysis-driven ssDNA translocation exerts a pull force on G4 unwinding. Molecular dynamics simulations identified a specific region within BsPif1 that contains five crucial amino acid sites responsible for G4 binding and unwinding. A "molecular wire stripper" model is proposed to explain BsPif1's mechanism of G4 unwinding. These findings provide a new theoretical foundation for further exploration of the G4 development mechanism in Pif1 family helicases.

Mechanistic Insight Into Cadmium- and Zinc-Induced Inactivation of the Candida albicans Pif1 Helicase.

Zinc and cadmium are environmental contaminants that can cause disease by affecting the activity of DNA-repair proteins. In this study, we investigated the effect of Zn2+ and Cd2+ on the Candida albicans Pif1, a DNA-repair helicase that plays a critical role in ensuring genomic stability. We show that Zn2+ and Cd2+ strongly inhibit both the ATPase and the unwinding activities of CaPif1, but have no effect on its DNA binding activity. High concentrations of Cd2+ may bind to the cysteine residues of CaPif1, and its inhibition appears to be difficult to be restored by ethylene diamine tetraacetic acid, while inhibition due to Zn2+ can. When the two ions are at low concentrations, increasing the concentration of ATP in the reaction can appropriately weaken the inhibitory effect of Zn2+, while cysteine can reduce the inhibitory effect of Cd2+. In addition, we found that for both Cd2+ and Zn2+ the inhibition effects were nearly 100 times greater in reduced environments than in non-reducing environments. When heavy metals stimulate the body's response, the environment of the body becomes less reducing, and thus the tolerance of CaPif1 to heavy metals will be stronger. We propose that CaPif1 may resist the toxicity of heavy metals through this mechanism. Altogether, our results provide new insights into the mechanisms by which heavy metals are toxic to DNA-repair proteins.

A novel electrochemical biosensor based on peptidoglycan and platinum-nickel-copper nano-cube for rapid detection of Gram-positive bacteria.

A novel non-enzyme electrochemical biosensor for the rapid detection of Gram-positive bacteria has been constructed that relys on a stable and efficient combination between the peptidoglycan layer and platinum-nickel-copper nanocubes (Pt-Ni-Cu NCs). Briefly, bacteria were first captured by a specific antibody. Then, the electrochemical signal materials (Pt-Ni-Cu NCs) were bound to the bacteria peptidoglycan layer using specific structural and surface features. The rapid and sensitive bacterial detection was then achieved using intrinsic electrochemical characteristics and superoxidase-like activity of the Pt-Ni-Cu NCs. Moreover, the nature of peptidoglycan covering the whole bacteria provided the premise for signal amplification. Under optimal conditions, the electrochemical signal variation was proportional to the concentration of bacteria ranging from 1.5 × 102 to 1.5 × 108 CFU/mL with a detection limit of 42 CFU/mL using a working potential of - 0.4 V. This electrochemical biosensor has been successfully applied to detect bacteria concentrations in urine samples, and the recoveries range from 90.4 to 107%. The proposed biosensor could be applied for broad-spectrum detection of Gram-positive bacteria since most Gram-positive bacteria possess a thick peptidoglycan layer. The developed electrochemical biosensing strategy might be used as a potential tool for clinical pathogenic bacteria detection and point-of-care testing (POCT).

Molybdenum disulfide@5-carboxyfluorescein-probe biosensor for unamplified specific fragment detection in long nucleic acids based on magnetic composite probe-actuated deblocking of secondary structure.

Secondary structures in long circulating tumor nucleic acids have potential obstacles for specific location point hybridized detection of gene fragments. The exploration of biosensing strategies requires selectively changing the nucleic acids conformation and inducing signal switching. Herein, a self-assembled magnetic composite probe (MCP) was fabricated by the hybridization reaction of Linker DNA and a "Y"-junction-DNA nanostructure on the surface of magnetic beads, contributing to the capture, secondary structure unlocking, and enrichment of the PML/RARα DNA "L" subtype. Then, by integrating the MCP-actuated reactor, a one-step "off-on" signal switching MoS2@FAM-probe biosensing method was developed for the efficient detection of the PML/RARα DNA "L" subtype. The proposed biosensor was capable of detecting 100 bases PML/RARα DNA "L" subtype with a wide linear range of 1 pM to 200 nM and a limit of detection down to 0.223 pM without signal amplification. In addition, the biosensing method was successfully applied for the detection of target in serum samples. It is worth pointing out that this simple biosensing strategy could enable long nucleic acids fragments with secondary structures from ctDNA and ctRNA to be quantitatively assayed based on direct hybridization.

High-sensitive and multiplex biosensing assay of NSCLC-derived exosomes via different recognition sites based on SPRi array.

Non-small cell lung cancer (NSCLC) have been reported to secret a high concentration of exosomes into blood circulatory system, which is one of sensitive and non-invasive biomarkers for NSCLC's early-stage diagnosis. But it is still lack of feasible and accurate methods to analyze the different NSCLC cells-derived exosomes. Herein, we built a SPRi biosensing assay for high-sensitive and multiplex characterizations of NSCLC-derived exosomes by bioaffinity interactions of antibodies and different recognition sites. By this way, the exosomes derived from normal lung and NSCLC cells can be effectively distinguished through precise identification of the exosomal protein pattern. And the multiplex characterizations of NSCLC-related exosomes are also achieved by anti-CD63, anti-EGFR and anti-EpCAM modified SPRi array. The limit of detection (LOD) of this SPRi-based biosensor approaches to the level of 104 particles/µL with the help of functionalized gold nanoparticles. Besides, the developed biosensing assay was successfully applied in the determination of exosomes purified from clinical plasma samples. This SPRi biosensing strategy might offer a potential alternative for massive high-throughput screening for NSCLC in clinical specimens.

Fiber optic surface plasmon resonance biosensor for detection of PDGF-BB in serum based on self-assembled aptamer and antifouling peptide monolayer.

Herein, a home-build fiber optic surface plasmon resonance (FO-SPR) biosensing platform has been developed for highly sensitive detection of platelet-derived growth factor (PDGF-BB) based aptamer-functionalized AuNPs for signal enhancement. In this biosensor, the PDGF-BB aptamer was used to specifically capture PDGF-BB, and the antifouling peptide demonstrated great ability for resisting non-specific adsorption. After a sandwich reaction, the aptamer, PDGF-BB and aptamer-functionalized AuNPs complexes were formed on the fiber optic (FO) probe surface to significantly amplify FO-SPR signal. This method exhibited a broad detection range from 1 to 1000 pM of PDGF-BB and a low detection limit of 0.35 pM. Moreover, this biosensor was successfully applied to the detection of PDGF-BB in 10% human serum samples without suffering from serious interference owing to the excellent antifouling property of the peptide. Thus, this developed FO-SPR biosensor could be a potential alternative device for proteins determination, even as a point-of-care diagnostic tool (POCT) in clinical application.

Detection of KRAS mutation via ligation-initiated LAMP reaction.

KRAS mutations are abnormalities widely found in genomic DNA and circulating tumor DNA (ctDNA) of various types of cancers. Thus, highly sensitive detection of KRAS mutations in genomic DNA is of great significance in disease diagnosis and personalized medicine. Here, we developed a ligation-initiated loop-mediated isothermal amplification (LAMP) assaying method for ultrasensitive detection of KRAS mutation. In the presence of mutant KRAS DNA (mutDNA), the dumbbell-shaped structure (DSS) is formed by the specific ligation of two substrates (SLS1 and SLS2), which act as a template to initiate the following LAMP amplification. Making use of the outstanding specificity of ligation reaction and superior amplification of LAMP, 10 aM mutDNA can be accurately determined. In addition, as low as 0.1% mutDNA can be detected in the presence of a large excess of wild-type KRAS DNA (wtDNA), indicating the high sensitivity and specificity of the method. Furthermore, this strategy has been successfully applied for detection of a KRAS mutation from tissue samples of colorectal cancer patients. Thus, the developed ligation-initiated LAMP fluorescence assaying strategy presents a promising prospect for ultrasensitive detection of mutations.

Esthetic improvements of postorthodontic white-spot lesions treated with resin infiltration and microabrasion: A split-mouth, randomized clinical trial.

OBJECTIVE: To compare the esthetic improvement between postorthodontic white-spot lesions (WSLs) treated by resin infiltration and microabrasion for 12 months. MATERIALS AND METHODS: A total of 20 patients with 128 teeth with postorthodontic WSLs were recruited. A simple randomized, split-mouth, positive controlled design was used to allocate patients to resin infiltration or microabrasion groups. The lesion area ratio (R value) was calculated between the area of a WSL and the labial surface of the corresponding tooth based on standardized clinical photographs. The color change (ΔE) of each tooth was measured with a Crystaleye spectrophotometer (Olympus, Tokyo, Japan). Every measurement was taken before treatment (T0) and at different time points after treatment: 1 week (T1), 6 months (T6), and 12 months (T12). RESULTS: A total of 16 patients with 108 trial teeth were available at T12. Each group had 54 trial teeth. In both groups, there was a significant decrease in R value and ΔE between T1 and T0 (P < .0001). In the infiltration group, the R value and ΔE had no significant changes over time from T1 to T12. In the microabrasion group, the R value and ΔE decreased significantly from T1 to T6. The R value of resin infiltration was lower when compared with microabrasion at every recall point (P < .001). The ΔE had no significant differences between the two groups at any timepoint. CONCLUSIONS: Resin infiltration and microabrasion improved the esthetic appearance of WSLs and showed sufficient durability for 12 months. Resin infiltration showed a better esthetic improvement effect when compared with microabrasion at 12 months.

Monolayer rubrene functionalized graphene-based eletrochemiluminescence biosensor for serum cystatin C detection with immunorecognition-induced 3D DNA machine.

Only surficial molecules of eletrochemiluminescent (ECL) nanomaterials are the most reactive species in the typical ECL reaction. Herein, monolayer rubrene was assembled on the surface of graphene sheet to obtain monolayer rubrene functionalized graphene composite (G/mRub) with strong ECL emission by maximizing the surficial rubrene molecules. Based on G/mRub as the strong ECL emitter, an ultrasensitive "on-off" biosensor was developed to detect cystatin C (Cys C) in human serum with the help of a novel immunorecognition-induced enzyme-free 3D DNA machine. Benefiting from the strong ECL emission of G/mRub and the efficient signal amplification of 3D DNA machine, the established biosensor achieved high sensitivity for Cys C detection with linear range from 1.0 fg mL-1 to 10 ng mL-1 and limit of detection down to 0.38 fg mL-1. In addition, this enzyme-free biosensing method was adopted to successfully detect the concentration of Cys C in human serum. Therefore, the G/mRub based ECL biosensor might provide a potential tool for protein detection in clinical diagnosis and a new avenue to prepare high-performance luminescent nanomaterials.

A simple fluorescence biosensing strategy for ultrasensitive detection of the BCR-ABL1 fusion gene based on a DNA machine and multiple primer-like rolling circle amplification.

A one-step, rapid fluorescence biosensing method has been developed for ultrasensitive detection of the BCR-ABL1 fusion gene based on a polymerase/nicking endonuclease DNA machine and multiple primer-like rolling circle amplification (RCA). In the strategy, the BCR-ABL1 fusion gene can be specifically identified by using a dual probe to form a three-way junction structure (3-WJ). Then the 3-WJ based DNA machine is driven by polymerase and nicking endonuclease to generate a large number of triggers, initiating a downstream RCA reaction. The introduction of two nicking endonuclease recognition sites into a circular DNA template makes RCA occur in a multiple primer-like manner, achieving exponential growth of the signal. Benefiting from the cascade amplification, the developed method generates a wide linear response from 10 fM to 1 nM with a low detection limit of 5.52 fM. In addition, the one-step operation allows the assay to be completed within 60 min and acceptable recovery is obtained in complex samples. These merits endow the biosensing strategy with certain potential for the clinical diagnosis and scientific research of the BCR-ABL1 fusion gene.

A highly sensitive SPRi biosensing strategy for simultaneous detection of multiplex miRNAs based on strand displacement amplification and AuNP signal enhancement.

Herein, a dual channel surface plasmon resonance imaging (SPRi) biosensor has been developed for the simultaneous and highly sensitive detection of multiplex miRNAs based on strand displacement amplification (SDA) and DNA-functionalized AuNP signal enhancement. In the presence of target miRNAs (miR-21 or miR-192), the miRNAs could specifically hybridize with the corresponding hairpin probes (H) and initiate the SDA, resulting in massive triggers. Subsequently, the two parts of the released triggers could hybridize with capture probes (CP) and DNA-functionalized AuNPs, assembling DNA sandwiches with great mass on the chip surface. A significantly amplified SPR signal readout was achieved. This established biosensing method was capable of simultaneously detecting multiplex miRNAs with a limit of detection down to 0.15 pM for miR-21 and 0.22 pM for miR-192. This method exhibited good specificity and acceptable reproducibility. Moreover, the developed method was applied to the determination of target miRNAs in a complex matrix. Thus, this developed SPRi biosensing method may present a potential alternative tool for miRNA detection in biomedical research and clinical diagnosis.

An enzyme-free and label-free surface plasmon resonance biosensor for ultrasensitive detection of fusion gene based on DNA self-assembly hydrogel with streptavidin encapsulation.

In this research, an enzyme-free and label-free surface plasmon resonance (SPR) biosensing strategy has been developed for ultrasensitive detection of fusion gene based on the heterogeneous target-triggered DNA self-assembly aptamer-based hydrogel with streptavidin (SA) encapsulation. In the presence of target, the capture probes (Cp) immobilized on the chip surface can capture the PML/RARα, forming a Cp-PML/RARα duplex. After that, the aptamer-based network hydrogel nanostructure is formed on the gold surface via target-triggered self-assembly of X shaped polymers. Subsequently, the SA can be encapsulated into hydrogel by the specific binding of SA aptamer, forming the complex with super molecular weight. Thus, the developed strategy achieves dramatic enhancement of the SPR signal. Using PML/RARα "S" subtype as model analyte, the developed biosensing method can detect target down to 45.22 fM with a wide linear range from 100 fM to 10 nM. Moreover, the high efficiency biosensing method shows excellent practical ability to identify the clinical PCR products of PML/RARα. Thus, this proposed strategy presents a powerful platform for ultrasensitive detection of fusion gene and early diagnosis and monitoring of disease.

Collapse of DNA Tetrahedron Nanostructure for "Off-On" Fluorescence Detection of DNA Methyltransferase Activity.

As a potential detection technique, highly rigid and versatile functionality of DNA tetrahedron nanostructures is often used in biosensing systems. In this work, a novel multifunctional nanostructure has been developed as an "off-on" fluorescent probe for detection of target methyltransferase by integrating the elements of DNA tetrahedron, target recognition, and dual-labeled reporter. This sensing system is initially in an "OFF" state owing to the close proximity of fluorophores and quenchers. After the substrate is recognized by target methyltransferase, the DNA tetrahedron can be methylated to produce methylated DNA sites. These sites can be recognized and cut by the restriction endonuclease DpnI to bring about the collapse of the DNA tetrahedron, which leads to the separation of the dual-labeled reporters from the quenchers, and thus the recovery of fluorescence signal to produce an "ON" state. The proposed DNA tetrahedron-based sensing method can detect Dam methyltransferase in the range of 0.1-90 U mL-1 with a detection limit of 0.045 U mL-1 and shows good specificity and reproducibility for detection of Dam methyltransferase in a real sample. It has been successfully applied for screening various methylation inhibitors. Thus, this work possesses a promising prospect for detection of DNA methyltransfrase in the field of clinical diagnostics.

Effect and Stability of Poly(Amido Amine)-Induced Biomineralization on Dentinal Tubule Occlusion.

In recent years, scientists have developed various biomaterials to remineralize human teeth to treat dentine hypersensitivity. Poly(amido amine) (PAMAM) dendrimers have become a research focus in this field. It has been demonstrated that PAMAM is able to create precipitates both on the surface of and within the dentinal tubules, however, there is little information about its effect on reducing dentine permeability in vitro. This study aimed to evaluate the in vitro effectiveness and stability of the fourth generation amine-terminated PAMAM on dentinal tubule occlusion, especially on dentine permeability. Sodium fluoride (NaF), which has been widely used as a desensitizing agent, is regarded as positive control. Demineralized sensitive dentine samples were coated with PAMAM or sodium fluoride solutions and soaked in artificial saliva (AS) at 37 °C for different periods. Four weeks later, samples in each group were then equally split into two subgroups for testing using a brushing challenge and an acid challenge. Dentine permeability of each specimen was measured before and after each challenge using a fluid filtration system. Dentine morphology and surface deposits were characterized by scanning electron microscope (SEM) and analyzed with Image-Pro Plus software. Data were evaluated through multifactorial ANOVA with repeated measures and pair-wise comparisons at a level of 5%. The results showed that PAMAM and NaF significantly reduced dentine permeability to 25.1% and 20.7%. Both of them created precipitates on dentine surfaces after AS immersion for 28 days. PAMAM-induced biomineralization not only on dentine surfaces, but also deeper in dentinal tubules, significantly reduced dentine permeability. Moreover, PAMAM-induced biomineralization elicited excellent stable occlusion effects after acid challenge. In conclusion, PAMAM demonstrated a strong ability to resist acid and showed great potential to be used in the treatment of dentine hypersensitivity in future.

G-quadruplex and G-rich sequence stimulate Pif1p-catalyzed downstream duplex DNA unwinding through reducing waiting time at ss/dsDNA junction.

Alternative DNA structures that deviate from B-form double-stranded DNA such as G-quadruplex (G4) DNA can be formed by G-rich sequences that are widely distributed throughout the human genome. We have previously shown that Pif1p not only unfolds G4, but also unwinds the downstream duplex DNA in a G4-stimulated manner. In the present study, we further characterized the G4-stimulated duplex DNA unwinding phenomenon by means of single-molecule fluorescence resonance energy transfer. It was found that Pif1p did not unwind the partial duplex DNA immediately after unfolding the upstream G4 structure, but rather, it would dwell at the ss/dsDNA junction with a 'waiting time'. Further studies revealed that the waiting time was in fact related to a protein dimerization process that was sensitive to ssDNA sequence and would become rapid if the sequence is G-rich. Furthermore, we identified that the G-rich sequence, as the G4 structure, equally stimulates duplex DNA unwinding. The present work sheds new light on the molecular mechanism by which G4-unwinding helicase Pif1p resolves physiological G4/duplex DNA structures in cells.

Crystal structures of the BsPif1 helicase reveal that a major movement of the 2B SH3 domain is required for DNA unwinding.

Pif1 helicases are ubiquitous members of the SF1B family and are essential for maintaining genome stability. It was speculated that Pif1-specific motifs may fold in specific structures, conferring distinct activities upon it. Here, we report the crystal structures of the Pif1 helicase from Bacteroides spp with and without adenosine triphosphate (ATP) analog/ssDNA. BsPif1 shares structural similarities with RecD2 and Dda helicases but has specific features in the 1B and 2B domains. The highly conserved Pif1 family specific sequence motif interacts with and constraints a putative pin-loop in domain 1B in a precise conformation. More importantly, we found that the 2B domain which contains a specific extended hairpin undergoes a significant rotation and/or movement upon ATP and DNA binding, which is absolutely required for DNA unwinding. We therefore propose a mechanism for DNA unwinding in which the 2B domain plays a predominant role. The fact that the conformational change regulates Pif1 activity may provide insight into the puzzling observation that Pif1 becomes highly processive during break-induced replication in association with Polδ, while the isolated Pif1 has low processivity.

The Bacteroides sp. 3_1_23 Pif1 protein is a multifunctional helicase.

ScPif1 DNA helicase is the prototypical member of a 5'-to-3' helicase superfamily conserved from bacteria to human and plays various roles in the maintenance of genomic homeostasis. While many studies have been performed with eukaryotic Pif1 helicases, including yeast and human Pif1 proteins, the potential functions and biochemical properties of prokaryotic Pif1 helicases remain largely unknown. Here, we report the expression, purification and biochemical analysis of Pif1 helicase from Bacteroides sp. 3_1_23 (BsPif1). BsPif1 binds to a large panel of DNA substrates and, in particular, efficiently unwinds partial duplex DNAs with 5'-overhang, fork-like substrates, D-loop and flap-like substrates, suggesting that BsPif1 may act at stalled DNA replication forks and enhance Okazaki fragment maturation. Like its eukaryotic homologues, BsPif1 resolves R-loop structures and unwinds DNA-RNA hybrids. Furthermore, BsPif1 efficiently unfolds G-quadruplexes and disrupts nucleoprotein complexes. Altogether, these results highlight that prokaryotic Pif1 helicases may resolve common issues that arise during DNA transactions. Interestingly, we found that BsPif1 is different from yeast Pif1, but resembles more human Pif1 with regard to substrate specificity, helicase activity and mode of action. These findings are discussed in the context of the possible functions of prokaryotic Pif1 helicases in vivo.

G-quadruplexes significantly stimulate Pif1 helicase-catalyzed duplex DNA unwinding.

The evolutionarily conserved G-quadruplexes (G4s) are faithfully inherited and serve a variety of cellular functions such as telomere maintenance, gene regulation, DNA replication initiation, and epigenetic regulation. Different from the Watson-Crick base-pairing found in duplex DNA, G4s are formed via Hoogsteen base pairing and are very stable and compact DNA structures. Failure of untangling them in the cell impedes DNA-based transactions and leads to genome instability. Cells have evolved highly specific helicases to resolve G4 structures. We used a recombinant nuclear form of Saccharomyces cerevisiae Pif1 to characterize Pif1-mediated DNA unwinding with a substrate mimicking an ongoing lagging strand synthesis stalled by G4s, which resembles a replication origin and a G4-structured flap in Okazaki fragment maturation. We find that the presence of G4 may greatly stimulate the Pif1 helicase to unwind duplex DNA. Further studies reveal that this stimulation results from G4-enhanced Pif1 dimerization, which is required for duplex DNA unwinding. This finding provides new insights into the properties and functions of G4s. We discuss the observed activation phenomenon in relation to the possible regulatory role of G4s in the rapid rescue of the stalled lagging strand synthesis by helping the replicator recognize and activate the replication origin as well as by quickly removing the G4-structured flap during Okazaki fragment maturation.

Molecular mechanism of G-quadruplex unwinding helicase: sequential and repetitive unfolding of G-quadruplex by Pif1 helicase.

Recent advances in G-quadruplex (G4) studies have confirmed that G4 structures exist in living cells and may have detrimental effects on various DNA transactions. How helicases resolve G4, however, has just begun to be studied and remains largely unknown. In the present paper, we use single-molecule fluorescence assays to probe Pif1-catalysed unfolding of G4 in a DNA construct resembling an ongoing synthesis of lagging strand stalled by G4. Strikingly, Pif1 unfolds and then halts at the ss/dsDNA junction, followed by rapid reformation of G4 and 'acrobatic' re-initiation of unfolding by the same monomer. Thus, Pif1 unfolds single G4 structures repetitively. Furthermore, it is found that Pif1 unfolds G4 sequentially in two large steps. Our study has revealed that, as a stable intermediate, G-triplex (G3) plays an essential role in this process. The repetitive unfolding activity may facilitate Pif1 disrupting the continuously reforming obstructive G4 structures to rescue a stalled replication fork. The proposed mechanism for step-wise unfolding of G4 is probably applicable to other helicases that resolve G4 structures for maintaining genome stability.