Ipsilateral transfer of motor skill from lower to upper limb in healthy adults: A randomized controlled trial.

BACKGROUND AND PURPOSE: Whereas motor skills of the untrained upper limb (UL) can improve following practice with the other UL, it has yet to be determined if an UL motor skill can improve following practice of that skill with the lower limb (LL). METHODS: Forty-five healthy subjects randomly participated in a 10-minute single-session intervention of (1) practicing 50 reaching movement (RM) sequences with the non-dominant left LL toward light switches (LL group); or (2) observing the identical 50 light switches sequences (Switches Observation (SO) group); or (3) observing nature films (Nature Observation (NO) group). RM sequence performance with the left UL toward the light switches was tested before and immediately after the intervention and retested after 24 h. RESULTS: Reaching response time improved in the LL group more than in the SO and NO groups in the posttest (pBonferroni = 0.038 and pBonferroni < 0.001, respectively), and improved in the LL group more than in the NO group in the retest (pBonferroni = 0.004). Percentage of fails did not differ between groups across the timepoints. CONCLUSIONS: It appears that the actual practice of the RM sequence skill with the UL together with the cognitive element embedded in the observation of the RM sequences contributes to ipsilateral transfer from LL to UL.

The effect of action observation combined with high-definition transcranial direct current stimulation on motor performance in healthy adults: A randomized controlled trial.

Action observation (AO) can improve motor performance in humans, probably via the human mirror neuron system. In addition, there is some evidence that transcranial direct current stimulation (tDCS) can improve motor performance. However, it is yet to be determined whether AO combined with tDCS has an enhanced effect on motor performance. We investigated the effect of AO combined with high-definition tDCS (HD-tDCS) targeting the inferior parietal lobe (IPL) and inferior frontal gyrus (IFG), the main aggregates of the human mirror neuron system, on motor performance in healthy adults and compared the immediate vs. 24-h retention test effects (anodal electrodes were placed over these regions of interest). Sixty participants were randomly divided into three groups that received one of the following single-session interventions: (1) observation of a video clip that presented reaching movement sequences toward five lighted units + active HD-tDCS stimulation (AO + active HD-tDCS group); (2) observation of a video clip that presented the same reaching movement sequences + sham HD-tDCS stimulation (AO + sham HD-tDCS group); and (3) observation of a video clip that presented neutral movie while receiving sham stimulation (NM + sham HD-tDCS group). Subjects' reaching performance was tested before and immediately after each intervention and following 24 h. Subjects performed reaching movements toward units that were activated in the same order as the observed sequence during pretest, posttest, and retest. Occasionally, the sequence order was changed by beginning the sequence unexpectedly with a different activated unit. Outcome measures included mean Reaching Time and difference between the Reaching Time of the unexpected and expected reaching movements (Delta). In the posttest and retest, Reaching Time and Delta improved in the AO + sham HD-tDCS group compared to the NM + HD-sham tDCS group. In addition, at posttest, Delta improved in the AO + active HD-tDCS group compared to the NM + sham HD-tDCS group. It appears that combining a montage of active HD-tDCS, which targets the IPL and IFG, with AO interferes with the positive effects of AO alone on the performance of reaching movement sequences.

A multi-stage 130 m/s reluctance linear electromagnetic launcher.

Moon launching capabilities are vital for space program development. Especially important is the capability to launch without fuels or disposable elements since bringing supplies to the moon is complicated and expensive. An electric system would have the benefit of using solar or nuclear-based unlimited electrical energy. In this paper, such an electrical launching system is suggested-a reluctance coilgun launcher with multi acceleration stages. It has the benefit of simplicity and longer lifetime compared to other electrical launchers. In this paper, a successful implementation of a multi-stage reluctance launcher is presented that reaches the highest reported launching speeds from a reluctance coilgun. Moreover, a method to successfully add more and more stages is presented. Based on this method, an electrical launcher to be used for launching from the moon can be designed.

Corona and polio viruses are sensitive to short pulses of W-band gyrotron radiation.

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic has raised the need of versatile means for virus decontamination. Millimeter waves are used in biochemical research in dynamic nuclear polarization enhanced nuclear magnetic resonance (DNP/NMR) spectroscopy. However, their efficiency in object decontamination for viruses has not been tested yet. Here we report the high efficiency of 95 GHz waves in killing both coronavirus 229E and poliovirus. An exposure of 2 s to 95 GHz waves reduced the titer of these viruses by 99.98% and 99.375%, respectively, and formed holes in the envelope of 229E virions as detected by scanning electron microscopy (SEM) analysis. The ability of 95 GHz waves to reduce the coronavirus titer to a range of limited infective dose of SARS-CoV-2 for humans and animal models along with precise focusing capabilities for these waves suggest 95 GHz waves as an effective way to decontaminate objects.

Thin-Film MEMS Resistors with Enhanced Lifetime for Thermal Inkjet.

In this paper, the failure mechanisms of the thermal inkjet thin-film resistors are recognized. Additionally, designs of resistors to overcome these mechanisms are suggested and tested by simulation and experiment. The resulting resistors are shown to have improved lifetimes, spanning an order of magnitude up to 2 × 109 pulses. The thermal failure mechanisms were defined according to the electric field magnitude in three critical points-the resistor center, the resistor-conductor edge, and the resistor thermal "hot spots". Lowering the thermal gradients between these points will lead to the improved lifetime of the resistors. Using MATLAB PDE simulations, various resistors shapes, with different electric field ratios in the hot spots, were designed and manufactured on an 8'' silicon wafer. A series of lifetime experiments were conducted on the resistors, and a strong relation between the shape and the lifetime of the resistor was found. These results have immediate ramifications regarding the different printing apparatuses which function with thermal inkjet technology, allowing the commercial production of larger thermal printheads with high MTBF rate. Such heads may fit fast and large 3D printers.

The Effects of Instruction Manipulation on Motor Performance Following Action Observation.

The effects of action observation (AO) on motor performance can be modulated by instruction. The effects of two top-down aspects of the instruction on motor performance have not been fully resolved: those related to attention to the observed task and the incorporation of motor imagery (MI) during AO. In addition, the immediate vs. 24-h retention test effects of those instruction's aspects are yet to be elucidated. Forty-eight healthy subjects were randomly instructed to: (1) observe reaching movement (RM) sequences toward five lighted units with the intention of reproducing the same sequence as fast and as accurate as possible (Intentional + Attentional group; AO+At); (2) observe the RMs sequence with the intention of reproducing the same sequence as fast and as accurate as possible and simultaneously to the observation to imagine performing the RMs (Intentional + attentional + MI group; AO+At+MI); and (3) observe the RMs sequence (Passive AO group). Subjects' performance was tested before and immediately after the AO and retested after 24 h. During each of the pretest, posttest, and retest, the subject performed RMs toward the units that were activated in the same order as the observed sequence. Occasionally, the sequence order was changed by beginning the sequence with a different activated unit. The outcome measures were: averaged response time of the RMs during the sequences, difference between the response time of the unexpected and expected RMs and percent of failures to reach the target within 1 s. The averaged response time and the difference between the response time of the unexpected and expected RMs were improved in all groups at posttest compared to pretest, regardless of instruction. Averaged response time was improved in the retest compared to the posttest only in the Passive AO group. The percent of failures across groups was higher in pretest compared to retest. Our findings suggest that manipulating top-down aspects of instruction by adding attention and MI to AO in an RM sequence task does not improve subsequent performance more than passive observation. Off-line learning of the sequence in the retention test was improved in comparison to posttest following passive observation only.

Fluid Micro-Reservoirs Array Design with Auto-Pressure Regulation for High-Speed 3D Printers.

Three dimensional (3D) printing technology is rapidly evolving such that printing speed is now a crucial factor in technological developments and future applications. For printing heads based on the inkjet concept, the number of nozzles on the print head is a limiting factor of printing speed. This paper offers a method to practically increase the number of nozzles unlimitedly, and thus to dramatically ramp up printing speed. Fluid reservoirs are used in inkjet print heads to supply fluid through a manifold to the jetting chambers. The pressure in the reservoir's outlet is important and influences device performance. Many efforts have been made to regulate pressure inside the fluid reservoirs so as to obtain a constant pressure in the chambers. When the number of nozzles is increased too much, the regulation of uniform pressure among all the nozzles becomes too complicated. In this paper, a different approach is taken. The reservoir is divided into an array of many micro-reservoirs. Each micro-reservoir supports one or a few chambers, and has a unique structure with auto-pressure regulation, where the outlet pressure is independent of the fluid level. The regulation is based on auto-compensation of the gravity force and a capillary force having the same dependence on the fluid level; this feature is obtained by adding a wedge in the reservoir with a unique shape. When the fluid level drops, the gravitational force and the capillary force decrease with it, but at similar rates. Terms for the force balance are derived and, consequently, a constant pressure in the fluid micro-reservoir segment is obtained automatically, with each segment being autonomous. This micro reservoir array is suggested for the enlargement of an inkjet print head and the achievement of high-speed 3D printing.

Note: A 95 GHz mid-power gyrotron for medical applications measurements.

A mid-power 95 GHz gyrotron was built and used for measuring insertion loss of biological tissue. The gyrotron is a compact table-top device that allows convenient measurements in a biological setup. It operates at the fundamental harmonic with TE02 circular mode. A mode converter is used to obtain TE10 rectangular mode in standard WR10 components. Using this gyrotron, beef tissue insertion loss was measured to be about 7-8 dB per millimeter.

Design of 95 GHz gyrotron based on continuous operation copper solenoid with water cooling.

The design work for 2nd harmonic 95 GHz, 50 kW gyrotron based on continuous operation copper solenoid is presented. Thermionic magnetron injection gun specifications were calculated according to the linear trade off equation, and simulated with CST program. Numerical code is used for cavity design using the non-uniform string equation as well as particle motion in the "cold" cavity field. The mode TE02 with low Ohmic losses in the cavity walls was chosen as the operating mode. The Solenoid is designed to induce magnetic field of 1.8 T over a length of 40 mm in the interaction region with homogeneity of ±0.34%. The solenoid has six concentric cylindrical segments (and two correction segments) of copper foil windings separated by water channels for cooling. The predicted temperature in continuous operation is below 93 °C. The parameters of the design together with simulation results of the electromagnetic cavity field, magnetic field, electron trajectories, and thermal analyses are presented.