Luminescent Ln3+-based silsesquioxanes with a ß-diketonate antenna ligand: toward the design of efficient temperature sensors.

We report the synthesis and single-crystal X-ray diffraction, magnetic, and luminescence measurements of a novel family of luminescent cage-like tetranuclear silsesquioxanes (PhSiO1.5)8(LnO1.5)4(O)(C5H8O2)6(EtOH)2(CH3CN)2⋅2CH3CN (where Ln = Tb, 1; Tb/Eu, 2; and Gd, 3), featuring seven-coordinated lanthanide ions arranged in a one-capped trigonal prism geometry. Compounds 1 and 2 exhibit characteristic Tb3+ and Tb3+/Eu3+-related emissions, respectively, sensitized by the chelating antenna acetylacetonate (acac) ligands upon excitation in the UV and visible spectral regions. Compound 3 is used to assess the energies of the triplet states of the acac ligand. For compound 1, theoretical calculations on the intramolecular energy transfer and multiphonon rates indicate a thermal balance between the 5D4 Stark components, while the mixed Tb3+/Eu3+ analog 2, with a Tb:Eu ratio of 3:1, showcases intra-cluster Tb3+-to-Eu3+ energy transfer, calculated theoretically as a function of temperature. By utilizing the intensity ratio between the 5D4→7F5 (Tb3+) and 5D0→7F2 (Eu3+) transitions in the range 11-373 K, we demonstrate the realization of a ratiometric luminescent thermometer with compound 2, operating in the range 11-373 K with a maximum relative sensitivity of 2.0% K-1 at 373 K. These findings highlight the potential of cage-like silsesquioxanes as versatile materials for optical sensing-enabled applications.

Luminescent Er3+ based single molecule magnets with fluorinated alkoxide or aryloxide ligands.

We report the synthesis, structures, and magnetic and luminescence properties of a series of new mono- and dinuclear Er3+ complexes derived from sterically demanding aryloxide and fluorinated alkoxide ligands: [4-tBu-2,6-(Ph2CH)2C6H2O]3Er(THF) (1), [(C6F5)3CO]3Er(Me3SiOH) (2), [(C6F5)3CO]3Er[(Me3Si)2NH] (3), [(C6F5)3CO]3Er(C6H5CH3) (4), [(C6F5)3CO]3Er(o-Me2NC6H4CH3) (5) and {[Ph(CF3)2CO]2Er(µ2-OC(CF3)2Ph)}2 (6). In compounds 1, 2, and 4, the Er3+ ion is four-coordinated and adopts a distorted trigonal pyramidal geometry, while in 3, 5, and 6, the coordination geometry of Er3+ is impacted by the presence of several relatively short Er⋯F distances, making them rather 6-coordinated. All compounds behave as field-induced Single Molecule Magnets (SMMs) and exhibit an Er3+ characteristic near infrared (NIR) emission associated with the 4I13/2 → 4I15/2 transition with a remarkably long lifetime going up to 73 µs, which makes them multifunctional luminescent SMMs. The deconvolution of the NIR emission spectra allowed us to provide a direct probe of the crystal field splitting in these compounds, which was correlated with magnetic data.

Induction-heated ball-milling: a promising asset for mechanochemical reactions.

While ball-milling is becoming one of the common tools used by synthetic chemists, an increasing number of studies highlight that it is possible to further expand the nature and number of products which can be synthesized, by heating the reaction media during mechanochemical reactions. Hence, developing set-ups enabling heating and milling to be combined is an important target, which has been looked into in both academic and industrial laboratories. Here, we report a new approach for heating up reaction media during ball-milling reactions, using induction heating (referred to as i-BM). Our set-up is attractive not only because it enables a very fast heating of the milling medium (reaching ≈80 °C in just 15 s), and that it is directly adaptable to commercially-available milling equipment, but also because it enables heating either the walls of the milling jars or the beads themselves, depending on the choice of the materials which compose them. Importantly, the possibility to heat a milling medium "from the inside" (when using for example a PMMA jar and stainless steel beads) is a unique feature compared to previously proposed systems. Through numerical simulations, we then show that it is possible to finely tune the properties of this heating system (e.g. heating rate and maximum temperature reached), by playing with the characteristics of the milling system and/or the induction heating conditions used. Lastly, examples of applications of i-BM are given, showing how it can be used to help elucidate reaction mechanisms in ball-milling, to synthesize new molecules, and to control the physical nature of milling media.

Tetranuclear lanthanide-based silsesquioxanes: towards a combination of a slow relaxation of the magnetization and a luminescent thermometry.

Lanthanide-based silsesquioxanes constitute an emerging family of cage-like metallasilsesquioxanes with exciting optical and magnetic properties. We report here the synthesis, structures and luminescence properties of a series of tetranuclear lanthanide-silsesquioxane compounds of general formula [NEt4]2[(Ph4Si4O8)2(Ln/Ln')4(NO3)6(EtOH)2(MeCN)2]·4(MeCN) with different lanthanide ions (where Ln/Ln' = Dy3+/Eu3+ (1), Dy3+/Tb3+ (2) and Eu3+/Tb3+/Y3+ (3)) and investigate the impact of the lanthanide ions combination on magnetic and photo-luminescent properties. Compound 1 behaves as a field-induced Single Molecule Magnet (SMM) and presents temperature-dependent luminescence characteristics of Eu3+ making it an emissive thermometer working in the temperature range 293-373 K with the maximum relative sensitivity of 1.15% K-1 achieved at 293 K. Compounds 2 and 3 are paramagnets, which demonstrate a characteristic photoluminescence with Dy3+ to Tb3+ and Tb3+ to Eu3+ energy transfers, respectively.

Hybrid multifunctionalized mesostructured stellate silica nanoparticles loaded with ß-diketonate Tb3+/Eu3+ complexes as efficient ratiometric emissive thermometers working in water.

Despite the great effort made in recent years on lanthanide-based ratiometric luminescent nanothermometers able to provide temperature measurements in water, their design remains challenging. We report on the synthesis and properties of efficient ratiometric nanothermometers that are based on mesoporous stellate nanoparticles (MSN) of ca. 90 nm functionalized with an acetylacetonate (acac) derivative inside the pores and loaded with ß-diketonate-Tb3+/Eu3+ complexes able to work in water, in PBS or in cells. Encapsulating a [(Tb/Eu)9(acac)16(µ3-OH)8(µ4-O)(µ4-OH)] complex (Tb/Eu ratio = 19/1 and 9/1) led to hybrid multifunctionalized nanoparticles exhibiting a Tb3+ and Eu3+ characteristic temperature-dependent luminescence with a high rate Tb3+-to-Eu3+ energy transfer. According to theoretical calculations, the modifications of photoluminescence properties and the increase in the pairwise Tb3+-to-Eu3+ energy transfer rate by about 10 times can be rationalized as a change of the coordination number of the Ln3+ sites of the complex from 7 to 8 accompanied by a symmetry evolution from Cs to C4v and a slight shortening of intramolecular Ln3+-Ln3+ distances upon the effect of encapsulation. These nanothermometers operate in the 20-70 °C range with excellent photothermal stability, cyclability and repeatability (>95%), displaying a maximum relative thermal sensitivity of 1.4% °C-1 (at 42.7 °C) in water. Furthermore, they can operate in cells with a thermal sensitivity of 8.6% °C-1 (at 40 °C), keeping in mind that adjusting the calibration for each system is necessary to ensure accurate measurements.

Synthesis and Characterization of Tetraphenylethene AIEgen-Based Push-Pull Chromophores for Photothermal Applications: Could the Cycloaddition-Retroelectrocyclization Click Reaction Make Any Molecule Photothermally Active?

Three new tetraphenylethene (TPE) push-pull chromophores exhibiting strong intramolecular charge transfer (ICT) are described. They were obtained via [2 + 2] cycloaddition-retroelectrocyclization (CA-RE) click reactions on an electron-rich alkyne-tetrafunctionalized TPE (TPE-alkyne) using both 1,1,2,2-tetracyanoethene (TCNE), 7,7,8,8-tetracyanoquinodimethane (TCNQ) and 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ) as electron-deficient alkenes. Only the starting TPE-alkyne displayed significant AIE behavior, whereas for TPE-TCNE, a faint effect was observed, and for TPE-TCNQ and TPE-F4-TCNQ, no fluorescence was observed in any conditions. The main ICT bands that dominate the UV-Visible absorption spectra underwent a pronounced red-shift beyond the near-infrared (NIR) region for TPE-F4-TCNQ. Based on TD-DFT calculations, it was shown that the ICT character shown by the compounds exclusively originated from the clicked moieties independently of the nature of the central molecular platform. Photothermal (PT) studies conducted on both TPE-TCNQ and TPE-F4-TCNQ in the solid state revealed excellent properties, especially for TPE-F4-TCNQ. These results indicated that CA-RE reaction of TCNQ or F4-TCNQ with donor-substituted are promising candidates for PT applications.

Cascade strategy for triggered radical release by magnetic nanoparticles grafted with thermosensitive alkoxyamine.

The design of smart nanoplatforms presenting well-definite structures able to achieve controlled cascade action remotely triggered by external stimuli presents a great challenge. We report here a new nanosystem consisting of magnetic iron oxide nanoparticles covalently grafted with a thermosensitive radical initiator alkoxyamine, able to provide controlled and localized release of free radicals triggered by an alternating current (ac) magnetic field. These nanoparticles exhibit a high intrinsic loss power of 4.73 nHm2 kg-1 providing rapid heating of their surface under the action of an ac field, inducing the homolysis of alkoxyamine C-ON bond and then the oxygen-independent formation of radicals. This latter was demonstrated by electronic paramagnetic resonance spectroscopy, and the kinetics of homolysis has been investigated allowing a comparison of the temperature of alkoxyamine's homolysis with the one measured during the magnetothermia process.

Magneto-Induced Hyperthermia and Temperature Detection in Single Iron Oxide Core-Silica/Tb3+/Eu3+(Acac) Shell Nano-Objects.

Multifunctional nano-objects containing a magnetic heater and a temperature emissive sensor in the same nanoparticle have recently emerged as promising tools towards personalized nanomedicine permitting hyperthermia-assisted treatment under local temperature control. However, a fine control of nano-systems' morphology permitting the synthesis of a single magnetic core with controlled position of the sensor presents a main challenge. We report here the design of new iron oxide core-silica shell nano-objects containing luminescent Tb3+/Eu3+-(acetylacetonate) moieties covalently anchored to the silica surface, which act as a promising heater/thermometer system. They present a single magnetic core and a controlled thickness of the silica shell, permitting a uniform spatial distribution of the emissive nanothermometer relative to the heat source. These nanoparticles exhibit the Tb3+ and Eu3+ characteristic emissions and suitable magnetic properties that make them efficient as a nanoheater with a Ln3+-based emissive self-referencing temperature sensor covalently coupled to it. Heating capacity under an alternating current magnetic field was demonstrated by thermal imaging. This system offers a new strategy permitting a rapid heating of a solution under an applied magnetic field and a local self-referencing temperature sensing with excellent thermal sensitivity (1.64%·K-1 (at 40 °C)) in the range 25-70 °C, good photostability, and reproducibility after several heating cycles.

Operando acoustic analysis: a valuable method for investigating reaction mechanisms in mechanochemistry.

We present a new operando approach for following reactions taking place in mechanochemistry, relying on the analysis of the evolution of the sound during milling. We show that differences in sound can be directly correlated to (physico)chemical changes in the reactor, making this technique highly attractive and complementary to others for monitoring mechanochemical reactions. Most notably, it can provide unique information on the actual movements of the beads within the milling jars, which opens new avenues for helping rationalize mechanochemical processes.

A rational study of the influence of Mn2+-insertion in Prussian blue nanoparticles on their photothermal properties.

We investigated a series of Mn2+-Prussian blue (PB) nanoparticles NazMnxFe1-x[Fe(CN)6]1-y□y·nH2O of similar size, surface state and cubic morphology with various amounts of Mn2+ synthesized through a one step self-assembly reaction. We demonstrated by a combined experimental-theoretical approach that during the synthesis, Mn2+ substituted Fe3+ up to a Mn/Na-Mn-Fe ratio of 32 at% in the PB structure, while for higher amounts, the Mn2[Fe(CN)6] analogue is obtained. For comparison, the post-synthetic insertion of Mn2+ in PB nanoparticles was also investigated and completed with Monte-Carlo simulations to probe the plausible adsorption sites. The photothermal conversion efficiency (η) of selected samples was determined and showed a clear dependence on the Mn2+amount with a maximum efficiency for a Mn/Na-Mn-Fe ratio of 10 at% associated with a dependence on the nanoparticle concentration. Evaluation of the in vitro photothermal properties of these nanoparticles performed on triple negative human breast adenocarcinoma (MDA-MB-231) cells by using continuous and pulsed laser irradiation confirm their excellent PTT efficiency permitting low dose use.

A Novel Approach to the Facile Growth and Organization of Photothermal Prussian Blue Nanocrystals on Different Surfaces.

We report here a novel "one-pot" approach for the controlled growth and organization of Prussian blue nanostructures on three different surfaces: pure Au0, cysteamine-functionalized Au0, and SiO2-supported lipid bilayers with different natures of lipids. We demonstrate that fine control over the size, morphology, and the degree and homogeneity of the surface coverage by Prussian Blue (PB) nanostructures may be achieved by manipulating different parameters, which are the precursor concentration, the nature of the functional groups or the nature of lipids on the surfaces. This allows the growth of isolated PB nanopyramids and nanocubes or the design of thin dense films over centimeter square surfaces. The formation of unusual Prussian blue nanopyramids is discussed. Finally, we demonstrate, by using experimental techniques and theoretical modeling, that PB nanoparticles deposited on the gold surface exhibit strong photothermal properties, permitting a rapid temperature increase up to 90 °C with a conversion of the laser power of almost 50% for power source heat.

Temperature sensing in Tb3+/Eu3+-based tetranuclear silsesquioxane cages with tunable emission.

New luminescent cage-like tetranuclear silsesquioxanes [NEt4][(Ph4Si4O8)2(Tb3Eu)(NO3)4(OH)(EtOH)3(H2O)]·4(EtOH) (1) and [NEt4]2[(Ph4Si4O8)2(Tb2Eu2)(NO3)6(EtOH)2(MeCN)2]·4(MeCN) (2) present a tunable thermosensitive Tb3+-to-Eu3+ energy transfer driven by Tb3+ and Eu3+ emission and may be used as temperature sensors operating in the range 41-100 °C with excellent linearity (R 2 = 0.9990) and repeatability (>95%). The thermometer performance was evidenced by the maximum relative sensitivity of 0.63% °C-1 achieved at 68 °C.

New Luminescent Tetranuclear Lanthanide-Based Silsesquioxane Cage-Like Architectures.

Invited for the cover of this issue are Alexey N. Bilyachenko, Joulia Larionova and co-workers at the Russian Academy of Sciences, the Peoples' Friendship University of Russia, and University of Montpellier. The image depicts lanthanide-based cage-like silsesquioxanes exhibiting magnetic and luminescence properties that could constitute a particularly interesting new family related to multifunctional nanomaterials. Read the full text of the article at 10.1002/chem.202003351.

New Luminescent Tetranuclear Lanthanide-Based Silsesquioxane Cage-Like Architectures.

The synthesis, structure, magnetic, and luminescence properties investigations of four new cage-like lanthanide-based silsesquioxanes (Cat)2 [(PhSiO1.5 )8 (LnO1.5 )4 (O)(NO2.5 )6 (EtOH)2 (MeCN)2 ] (where Cat+ =Et4 N+ , PPh4 P+ and Ln3+ =Eu3+ , Tb3+ and (Ph4 P)4 [(PhSiO1.5 )8 (TbO1.5 )4 (O)2 (NO2.5 )8 ]⋅10MeCN are reported. They present an unusual prism-like topology of cage architectures and lanthanide-characteristic emission, which makes them the first luminescent cage-like lanthanide silsesquioxanes. One of the Tb3+ -based cages presents a magnetic spin-flip transition.

Tunable vegetable oil/silica hybrid microparticles for poorly water-soluble drug delivery.

To encapsulate and deliver poorly water-soluble drugs, castor oil/silica hybrid microparticles (HMP)s were synthesized. Green chemistries were used to silylate the oil and further cross-link it into solid microparticles by sol-gel reaction. Silylated castor oils (ICO)s at various silylation ratios were prepared and allowed the solubilization of ibuprofen at several concentrations up to 16 wt%. The HMPs were formulated by ThermoStabilized Emulsion (TSE) process which permits to "freeze" the oil-in-water emulsion while the sol-gel reaction occurs. The hybrid mineral/organic composition and the morphology (spherical shape and micrometric size) of these HMPs were determined by complementary technics (SEM, TGA, EDX, 29Si NMR and FTIR spectroscopies). The HMPs reached a good ibuprofen loading efficiency regardless to the formulation used while the release kinetics in simulated oral administration exhibited a tunable release during 3 h according to the silylation ratio. The ibuprofen rate also influenced its own amorphous or crystalline character within the HMPs. For subcutaneous conditions, ibuprofen release took place over 15 days. Finally, biodegradability assays in simulated digestion medium suggested a surface-limited hydrolysis of the particles and cytocompatibility studies on NIH-3T3 and Caco-2 cells demonstrated an excellent cellular viability.

Phase Stability of Spin-Crossover Nanoparticles Investigated by Synchrotron Mössbauer Spectroscopy and Small-Angle Neutron Scattering.

Spin-crossover nanomaterials have been actively studied in the past decade for their potential technological applications in sensing, actuating, and information processing devices. Unfortunately, an increasing number of the metallic centers become inactive at reduced sizes, presumably due to surface effects, limiting their switching ability and thus the scope of applications. Here we report on the investigation of "frozen" metallic centers in nanoparticles (2-80 nm size) of the spin-crossover compound Fe(pyrazine)[Ni(CN)4]. Magnetic measurements reveal both high-spin and low-spin residual fractions at atmospheric pressure. A pressure-induced transition of the high-spin residue is observed at around 1.5 GPa by synchrotron Mössbauer spectroscopy. We show that it is equivalent to a downshift of the transition temperature by ca. 400 K due to the size reduction. Unexpectedly, small-angle neutron scattering experiments demonstrate that these high-spin residual centers are not confined to the surface, which contradicts general theoretical considerations.

Controlled Anchoring of Iron Oxide Nanoparticles on Polymeric Nanofibers: Easy Access to Core@Shell Organic-Inorganic Nanocomposites for Magneto-Scaffolds.

Composites combining superparamagnetic iron oxide nanoparticles (SPIONs) and polymers are largely present in modern (bio)materials. However, although SPIONs embedded in polymer matrices are classically reported, the mechanical and degradation properties of the polymer scaffold are impacted by the SPIONs. Therefore, the controlled anchoring of SPIONs onto polymer surfaces is still a major challenge. Herein, we propose an efficient strategy for the direct and uniform anchoring of SPIONs on the surface of functionalized-polylactide (PLA) nanofibers via a simple free ligand exchange procedure to design PLA@SPIONs core@shell nanocomposites. The resulting PLA@SPIONs hybrid biomaterials are characterized by electron microscopy (scanning electron microscopy and transmission electron microscopy) and energy-dispersive X-ray spectroscopy analysis to probe the morphology and detect elements present at the organic-inorganic interface, respectively. A monolayer of SPIONs with a complete and homogeneous coverage is observed on the surface of PLA nanofibers. Magnetization experiments show that magnetic properties of the nanoparticles are well preserved after their grafting on the PLA fibers and that the size of the nanoparticles does not change. The absence of cytotoxicity, combined with a high sensitivity of detection in magnetic resonance imaging both in vitro and in vivo, makes these hybrid nanocomposites attractive for the development of magnetic biomaterials for biomedical applications.

Magnetic Susceptibility Study of Sub-Pico-emu Sample Using a Micromagnetometer: An Investigation through Bistable Spin-Crossover Materials.

A promising and original method to study the spin-transition in bistable spin-crossover (SCO) materials using a magnetoresistive multiring sensor and its self-generated magnetic field is reported. Qualitative and quantitative studies are carried out combining theoretical and experimental approaches. The results show that only a small part of matter dropped on the sensor surface is probed by the device. At a low bias-current range, the number of detected nanoparticles depends on the amplitude of the current. However, in agreement with the theoretical model, the stray voltage from the particles is proportional to the current squared. By changing both the bias current and the concentration of particle droplet, the thermal hysteresis of an ultrasmall volume, 1 × 10-4 mm3 , of SCO particles is measured. The local probe of the experimental setup allows a highest resolution of 4 × 10-14 emu to be reached, which is never achieved by experimental methods at room temperature.

Re-appearance of cooperativity in ultra-small spin-crossover [Fe(pz){Ni(CN)4}] nanoparticles.

A reverse nanoemulsion technique was used for the elaboration of [Fe(pz){Ni(CN)4}] nanoparticles. Low-temperature micellar exchange made it possible to elaborate ultra-small nanoparticles with sizes down to 2 nm. When decreasing the size of the particles from 110 to 12 nm the spin transition shifts to lower temperatures, becomes gradual, and the hysteresis shrinks. On the other hand, a re-opening of the hysteresis was observed for smaller (2 nm) particles. A detailed (57)Fe Mössbauer spectroscopy analysis was used to correlate this unusual phenomenon to the modification of the stiffness of the nanoparticles thanks to the determination of their Debye temperature.

Non-extensivity of thermodynamics at the nanoscale in molecular spin crossover materials: a balance between surface and volume.

The spin transition behavior in nanoparticles of molecular spin crossover (SCO) materials is investigated theoretically using a two-variable microscopic Ising-like model solved by Monte Carlo simulations. The extensive nature of the energy, and therefore the whole thermodynamics is affected by the increasing role of surface energetic parameters. As a consequence the pressure inside the nanoparticle is different from the external pressure of the bath. The difference of the surface energies between the low spin (LS) and the high spin (HS) states is the origin of the modification of the SCO properties at finite sizes (downshift of the transition temperature and loss of the hysteresis). On the other hand, the extensivity of the system can be controlled by the form of the nanoparticle. Hollow particles allow control of the surface to volume ratio. An important consequence of this effect is the conservation of the SCO properties as a function of size. A modification of the intermolecular interactions at the surface leads to a modification of the surface rigidity, and will impact also on the extensivity of the system. When increasing/decreasing the surface rigidity the global elasticity of the nanoparticle raises/decreases and enhances/reduces the cooperativity of the SCO material.