RESUMEN
Saturated hydrocarbon bonds are ubiquitous in organic molecules; to date, the selective functionalization of C(sp3)-H bonds continues to pose a notorious difficulty, thereby garnering significant attention from the synthetic chemistry community. During the past several decades, a wide array of powerful new methodologies has been developed to enantioselectively modify C(sp3)-H bonds that is successfully applied in asymmetric formation of diverse bonds, including C-C, C-N, and C-O bonds; nevertheless, the asymmetric C(sp3)-H alkylation is elusive and, therefore, far less explored. In this work, we report a direct and robust strategy to construct highly valuable enantioenriched unnatural α-amino acid (α-AA) cognates and peptides by a copper-catalyzed enantioselective remote C(sp3)-H alkylation of N-fluorocarboxamides and readily accessible glycine esters under ambient conditions. The key to success lies in the optically active Cu catalyst generated through the coordination of glycine derivatives to enantiopure bisphosphine/Cu(I) species, which is beneficial to the single electronic reduction of N-fluorocarboxamides and the subsequent stereodetermining alkylation. More importantly, all types (primary, secondary, tertiary, and even α-oxy) of δ-C(sp3)-H bonds could be site- and stereospecifically activated by the kinetically favored 1,5-hydrogen atom transfer (1,5-HAT) step.
Asunto(s)
Cobre , Glicina , Cobre/química , Alquilación , Péptidos/química , CatálisisRESUMEN
Metal halide perovskite solar cells (PSCs) have garnered much attention in recent years. Despite the remarkable advancements in PSCs utilizing traditional metal electrodes, challenges such as stability concerns and elevated costs have necessitated the exploration of innovative electrode designs to facilitate industrial commercialization. Herein, a physically and chemically stable molybdenum (Mo) electrode is developed to fundamentally tackle the instability factors introduced by electrodes. The combined spatially resolved element analyses and theoretical study demonstrate the high diffusion barrier of Mo ions within the device. Structural and morphology characterization also reveals the negligible plastic deformation and halide-metal reaction during aging when Mo is in contact with perovskite (PVSK). The electrode/underlayer junction is further stabilized by a thin seed layer of titanium (Ti) to improve Mo film's uniformity and adhesion. Based on a corresponding p-i-n PSCs (ITO/PTAA/PVSK/C60/SnO2/ITO/Ti/Mo), the champion sample could deliver an efficiency of 22.25%, which is among the highest value for PSCs based on Mo electrodes. Meanwhile, the device shows negligible performance decay after 2000 h operation, and retains 91% of the initial value after 1300 h at 50-60 °C. In summary, the multilayer Mo electrode opens an effective avenue to all-round stable electrode design in high-performance PSCs.
RESUMEN
The freeform imaging system is playing a significant role in developing an optical system for the automotive heads-up display (HUD), which is a typical application of augmented reality (AR) technology. There exists a strong necessity to develop automated design algorithms for automotive HUDs due to its high complexity of multi-configuration caused by movable eyeballs as well as various drivers' heights, correcting additional aberrations introduced by the windshield, variable structure constraints originated from automobile types, which, however, is lacking in current research community. In this paper, we propose an automated design method for the automotive AR-HUD optical systems with two freeform surfaces as well as an arbitrary type of windshield. With optical specifications of sagittal and tangential focal lengths, and required structure constraints, our given design method can generate initial structures with different optical structures with high image quality automatically for adjusting the mechanical constructions of different types of cars. And then the final system can be realized by our proposed iterative optimization algorithms with superior performances due to the extraordinary starting point. We first present the design of a common two-mirror HUD system with longitudinal and lateral structures with high optical performances. Moreover, several typical double mirror off-axis layouts for HUDs were analyzed from the aspects of imaging performances and volumes. The most suitable layout scheme for a future two-mirror HUD is selected. The optical performance of all the proposed AR-HUD designs for an eye-box of 130 mm × 50 mm and a field of view of 13° × 5° is superior, demonstrating the feasibility and superiority of the proposed design framework. The flexibility of the proposed work for generating different optical configurations can largely reduce the efforts for the HUD design of different automotive types.
RESUMEN
Possessed with advantageous optoelectronic properties, perovskites have boosted the rapid development of solution-processed solar cells. The performance of perovskite solar cells (PSCs) is significantly weakened by the carrier loss at grain boundary grooves (GBGs); however, it receives limited attention and there lacks effective approach to solve this issue. Herein, for the first time, we constructed the tungstate/perovskite heterointerface via a "two step" in situ reaction approach that provides effective defect passivation and ensures efficient carrier dynamics at the GBGs. The exposed perovskite at grain boundaries is converted to wide-band-gap PbWO4 via an in-situ reaction between Pb2+ and tungstate ions, which passivate defects due to the strong ionic bonding. Moreover, recombination loss is further suppressed via the heterointerface energetics modification based on an additional transformation from PbWO4 to CaWO4 . PSCs based on this groove modification strategy showed good universality in both normal and inverted structure, with an improved efficiency of 23.25 % in the n-i-p device and 23.33 % in the p-i-n device. Stable power output of the modified device could maintain 91.7 % after around 1100â h, and the device efficiency could retain 92.5 % after aging in air for around 2110â h, and 93.1 % after aging at 85 °C in N2 for 972â h.
RESUMEN
In recent years, perovskite solar cells (PSCs) have been considered as one of the most promising photovoltaic technologies due to their solution processing, cost effectiveness, and excellent performance. The highest certified power conversion efficiency (PCE) achieved to date is 25.8%, which is approaching the best PCE of 26.81% achieved for silicon-based cells. However, perovskite materials are susceptible to various aging stressors, such as humidity, oxygen, temperature, and electrical bias, which hinder the industrialization of perovskite photovoltaic technologies. In this review, we discuss the lifetime of PSCs from the perspective of corrosion science. On one hand, benefiting from a series of anti-corrosion strategies (passivation, surface coating, machining etc.) used in corrosion science, the stability of perovskite devices is remarkably enhanced; on the other hand, given that perovskites are soft crystal lattices, which are different from traditional metals, the revealed degradation processes and specific methods to improve device operation stability can be applied to the field of corrosion, which can enrich and expand corrosion science.
RESUMEN
We report a cathodic reduction-dominated electrochemical approach for the hydrogenation of azobenzenes in dichloromethane. With cheap and readily available N,N-diisopropylethylamine as a catalytic mediator, the reaction proceeded smoothly in a simple undivided cell under constant-current electrolysis. A series of azobenzenes were successfully reduced to the corresponding hydrazobenzenes in moderate to high yields at room temperature. Preliminarily mechanistic studies indicate that solvent dichloromethane acts as a hydrogen source. The use of a common solvent as a hydrogen source, no need for stoichiometric mediators or metallic reductants, and mild conditions make this work a more straightforward and sustainable protocol for hydrogenation of azobenzenes.
RESUMEN
Organic-inorganic hybrid perovskites have emerged in the last decade as promising semiconductors due to the excellent optoelectronic properties. This kind of perovskites exhibited respectable photocatalytic activities toward potential application in battery; however, the instability issue still hindered their practical use. Herein, a hybrid perovskite material, 4,4'-ethylenedipyridinium lead bromide [(4,4'-EDP)Pb2 Br6 ], was assembled onto the carbon materials to function as photoelectrode of the Li-oxygen battery. The strong cation-π interactions between the A-site cations enabled this hybrid perovskite to endure the cycling process as well as the exposure to battery electrolyte and oxygen. Benefitting from the photo-generated carriers of the photoelectrode under illumination, the formation/decomposition of the discharge product was accelerated, thus leading to a reduced overpotential from 1.3â V to an optimized 0.5â V compared to the Li-oxygen battery without illumination. The overpotential could be maintained lower than 0.9â V after cycling for 170â h. Furthermore, when exposed to the sunlight, the charging voltage was reduced by over 0.2â V. The intrinsic stability and strong light absorption of perovskites together with the optimized perovskite/carbon cathode interfaces contributed to the improved performance under different light sources without complex material design, which shed light on the exploration of organic-inorganic hybrid perovskites in Li-oxygen battery applications.
RESUMEN
Perovskite/silicon tandem solar cells are promising to penetrate photovoltaic market. However, the wide-bandgap perovskite absorbers used in top-cell often suffer severe phase segregation under illumination, which restricts the operation lifetime of tandem solar cells. Here, a strain modulation strategy to fabricate light-stable perovskite/silicon tandem solar cells is reported. By employing adenosine triphosphate, the residual tensile strain in the wide-bandgap perovskite absorber is successfully converted to compressive strain, which mitigates light-induced ion migration and phase segregation. Based on the wide-bandgap perovskite with compressive strain, single-junction solar cells with the n-i-p layout yield a power conversion efficiency (PCE) of 20.53% with the smallest voltage deficits of 440 mV. These cells also maintain 83.60% of initial PCE after 2500 h operation at the maximum power point. Finally, these top cells are integrated with silicon bottom cells in a monolithic tandem device, which achieves a PCE of 26.95% and improved light stability at open-circuit.
RESUMEN
In this paper, a design scheme of an automobile low-beam light illumination system with a reflector free-form surface is presented. Per the energy grid mapping theory and edge ray theory, an oblique triangular energy mapping scheme was proposed, and the free-form reflector was obtained by geometric iterative calculation. The Monte Carlo ray tracing method was used to simulate the system. The simulation results met the regulatory requirements of ECE R112, and the light efficiency could reach 81%. The length, width, and height of the reflector were 55.61mm×22.02mm×23.70mm. The reflector achieves a special light type through precise light distribution, does not need other shielding objects, and has the advantage of small size.
RESUMEN
Solution processing of semiconductors is highly promising for the high-throughput production of cost-effective electronics and optoelectronics. Although hybrid perovskites have potential in various device applications, challenges remain in the development of high-quality materials with simultaneously improved processing reproducibility and scalability. Here, we report a liquid medium annealing (LMA) technology that creates a robust chemical environment and constant heating field to modulate crystal growth over the entire film. Our method produces films with high crystallinity, fewer defects, desired stoichiometry, and overall film homogeneity. The resulting perovskite solar cells (PSCs) yield a stabilized power output of 24.04% (certified 23.7%, 0.08 cm2) and maintain 95% of their initial power conversion efficiency (PCE) after 2000 hours of operation. In addition, the 1-cm2 PSCs exhibit a stabilized power output of 23.15% (certified PCE 22.3%) and keep 90% of their initial PCE after 1120 hours of operation, which illustrates their feasibility for scalable fabrication. LMA is less climate dependent and produces devices in-house with negligible performance variance year round. This method thus opens a new and effective avenue to improving the quality of perovskite films and photovoltaic devices in a scalable and reproducible manner.
RESUMEN
Visible-light-promoted α-methoxymethylation and aminomethylation of ketones using methanol as a sustainable C1 source have been developed. With rose bengal as the photosensitizer and air as the green oxidant, the methoxymethylation reactions proceeded smoothly under visible light irradiation at ambient temperature. Additionally, a one-pot one-step α-aminomethylation of ketones was achieved by adding N-nucleophiles. Preliminary mechanism studies suggest that the reaction mainly proceeds via a radical pathway.
RESUMEN
The design of electron transport layers (ETLs) is crucial to the performance of optoelectronic devices. A composite ETL was constructed to overcome the poor carrier extraction issue in perovskite solar cells, resulting in a maximum PCE of 19.14% with reduced hysteresis. A similar enhancement phenomenon was observed in both devices based on TiO2 and SnO2 ETLs.