Addition of liposomal bupivacaine to standard bupivacaine versus standard bupivacaine alone in the supraclavicular brachial plexus block: a randomized controlled trial.

BACKGROUND: The analgesic effect of adding liposomal bupivacaine to standard bupivacaine in supraclavicular brachial plexus block is not known. We hypothesized that addition of liposomal bupivacaine would reduce acute postoperative pain compared to standard bupivacaine alone. METHODS: A randomized controlled trial was conducted. Patients and outcome assessors were blinded. Eighty patients undergoing distal radial fracture fixation under regional anesthesia with supraclavicular brachial plexus block were randomized into two groups. The liposomal bupivacaine (LB-BPB) group received 10ml of 0.5% plain bupivacaine immediately followed by 10ml of 1.33% liposomal bupivacaine (n=40). The standard bupivacaine (S-BPB) group received 20ml of 0.5% plain bupivacaine (n=40). The primary outcome was weighted area under curve (AUC) numerical rating scale (NRS) pain score at rest over the first 48 hours after surgery. Secondary outcomes included AUC scores for pain with movement, overall benefit with analgesia score (OBAS) and other functional scores. RESULTS: For the primary outcome, LB-BPB group was associated with statistically significantly lower AUC pain score at rest (0.6 vs 1.4, p-value < 0.001) in the first 48 hours. Of the secondary outcomes, no difference between treatment groups reached statistical significance with the exception of AUC score for pain with movement (2.3 vs 3.7, adjusted p-value < 0.001) and OBAS (1.1 vs 1.7, adjusted p-value = 0.020) in the first 48 hours, as well as NRS pain score at rest (0.5 vs 1.9, adjusted p-value < 0.001) and with movement (2.7 vs 4.9, adjusted p-value < 0.001) on postoperative day (POD) 1. Differences in NRS pain scores on POD2, POD3 and POD4 did not reach the level of statistical significance. There were no statistically significant differences in sensory function. CONCLUSION: Liposomal bupivacaine given via supraclavicular brachial plexus block reduced pain at rest in the early postoperative period.

Factors associated with recanalization and reintervention following below knee polidocanol endovenous microfoam ablation for great saphenous and small saphenous veins.

BACKGROUND: Polidocanol endovenous microfoam (PEM) has been used to treat lower extremity venous reflux for almost one decade with specific advantages for below knee (BK) truncal veins where thermal ablation poses a risk of injury to adjacent nerves. The current literature of the BK segment often examines short-term outcomes with modest sample sizes. We aim to identify factors associated with recanalization and reintervention in this subset of patients. METHODS: We performed a retrospective study of a prospectively maintained database of patients from a single institution who underwent 1% PEM ablation for BK great saphenous vein (GSV) and small saphenous vein (SSV) reflux. Patients underwent duplex ultrasound (DU) within 7 days after injection, every 3 to 6 months for 1 year, and every 6 to 12 months thereafter. Patients with symptomatic recanalization underwent reintervention. The 26 patients lost to follow-up without DU after ablation were excluded. The factors associated with recanalization and reintervention were examined by multivariate and nonparametric analyses. RESULTS: Between March 2018 and July 2023, 411 patients (166 male, 245 female) with 573 treated limbs (284 right, 289 left) met the study criteria. Of the 573 included limbs, 457 (79.8%) had undergone prior above knee saphenous ablations. A total of 554 BK GSV and 42 SSV ablations were performed. The most recent DU was performed at a mean of 231 ± 329 days. The overall recanalization rate was 10.6% (55 GSVs and 8 SSVs) at a mean follow-up of 104 ± 180 days. Comparing the closed and recanalized veins, we found no significant difference in age (P = .90), treated laterality (P = .14), patient body mass index (P = .59), preprocedural CEAP (clinical-etiology-anatomy-pathophysiology) score (P = .79), recanalization rate in GSVs vs SSVs (P = .06), or administered PEM volume (P = .24). The recanalized veins had significantly larger preprocedural diameters than the veins that remained closed (recanalized, 4.9 mm; closed, 4.3 mm; P = .001). Men had higher incidence of recanalization than women (men, 14.2%; women, 8%; P = .015). Anticoagulation use was associated with recanalization (odds ratio, 1.96; 95% confidence interval, 1.1-3.6; P = .03). Early recanalization at the first DU accounted for 31 failures (49.2%) and had a significantly lower administered PEM volume compared with later recanalization (early, 4 mL; late, 5 mL; P = .025). There were no significant differences between the 33 recanalized patients requiring reintervention (52.4%) and the 30 who did not. Twenty-four reinterventions were performed with PEM, 100% of which remained closed at a median of 160 days (interquartile range, 257 days). CONCLUSIONS: PEM is successful for the treatment of BK GSV and SSV reflux with a closure rate of 89% at a mean of 231 days and shows promise as salvage therapy. Most cases of recanalization were noted in the early postprocedure period and were associated with a lower PEM volume. A larger vein diameter, male sex, and anticoagulation use are associated with higher rates of recanalization.

Determination of the ideal plate for medial femoral condyle fracture fixation: an anatomical fit and biomechanical study.

BACKGROUND: The aim of this study is to determine the best plate to use as a substitute to fix a medial femoral condyle fracture. MATERIALS AND METHODS: The first part is to measure the best fit between several anatomical plates including the Proximal Tibia Anterolateral Plate (PT AL LCP), the Proximal Tibia Medial Plate (PT M LCP), the Distal Tibia Medial Locking Plate (DT M LCP) and the Proximal Humerus (PHILOS) plate against 28 freshly embalmed cadaveric distal femurs. Measurements such as plate offset and number of screws in the condyle and shaft shall be obtained. The subsequent part is to determine the compressive force at which the plate fails. After creating an iatrogenic medial condyle fracture, the cadavers will be fixed with the two plates with the best anatomical fit and subjected to a compression force using a hydraulic press. RESULTS: The PT AL LCP offered the best anatomical fit whereas the PHILOS plate offered the maximal number of screws inserted. The force required to create 2 mm of fracture displacement between the two is not statistically significant (LCP 889 N, PHILOS 947 N, p = 0.39). The PT AL LCP can withstand a larger fracture displacement than the PHILOS (LCP 24.4 mm, PHILOS 17.4 mm, p = 0.004). DISCUSSION AND CONCLUSION: Both the PT AL LCP and the PHILOS remain good options in fixing a medial femoral condyle fracture. Between the two, we would recommend the PT AL LCP as the slightly superior option.

Show them what they can't see! An evaluation of the use of customized 3D printed models in head and neck anatomy.

Difficulty in visualizing anatomical structures has been identified as a challenge in anatomy learning and the emergence of three-dimensional printed models (3DPMs) offers a potential solution. This study evaluated the effectiveness of 3DPMs for learning the arterial supply of the head and neck region. One hundred eighty-four undergraduate medical students were randomly assigned to one of four learning modalities including wet specimen, digital model, 3DPM, and textbook image. Posttest scores indicated that all four modalities supported participants' knowledge acquisition, most significantly in the wet specimen group. While the participants rated 3DPMs lower for helping correct identification of structures than wet specimens, they praised 3DPMs for their ability to demonstrate topographical relationships between the arterial supply and adjacent structures. The data further suggested that the biggest limitation of the 3DPMs was their simplicity, thus making it more difficult for users to recognize the equivalent structures on the wet specimens. It was concluded that future designs of 3DPMs will need to consider the balance between the ease of visualization of anatomical structures and the degree of complexity required for successful transfer of learning. Overall, this study presented some conflicting evidence of the favorable outcomes of 3DPMs reported in other similar studies. While effective for anatomy learning as a standalone modality, educators must identify the position 3DPM models hold relative to other modalities in the continuum of undergraduate anatomy education in order to maximize their advantages for students.

Rehabilitation progress following reverse total shoulder replacement and internal fixation for geriatric three and four-part proximal humerus fractures - a propensity score matched comparison.

BACKGROUND: Proximal humerus fracture is one of the most common fractures in the elderly population. However, in patients with complex fracture patterns, there is still no general consensus in the best treatment method. This study aims to evaluate the outcomes between those treated with reverse total shoulder arthroplasty (rTSA) and open reduction internal fixation (ORIF). METHODS: All geriatric patients (> 60 years of age) with proximal humerus fractures undergoing surgical treatment were analysed. There were 25 patients treated with rTSA and 75 with ORIF. Propensity score matching was used to select 25 matching patients from the ORIF group according to age and gender. All patients underwent surgical intervention within 7 days (mean 3.8 days). All patients followed a protocol-driven rehabilitation programme with outcome assessment at 3, 6, 12 and 24 months. Constant score, qDASH, range of motion, rate of complications and revision surgery were recorded and compared. RESULTS: Twenty-five rTSA were age and gender matched with 25 ORIF patients. The average age of patients in rTSA and ORIF groups were 77.0 years and 75.2 years respectively. At 3 months, mean Constant score was 37.7 (rTSA) vs 45.5 (ORIF) (p = 0.099). Mean qDASH score was 50.6 (rTSA) vs 29.4 (ORIF) (p = 0.003). Mean forward flexion range was 72.9° (rTSA) vs 94.4° (ORIF) (p = 0.007). Mean abduction range was 64.0° (rTSA) vs 88.6° (ORIF) (p = 0.001). At 2 years, mean Constant score was 72.8 (rTSA) vs 70.8 (ORIF) (p = 0.472). Mean qDASH score was 4.50 (rTSA) vs 11.0 (ORIF) (p = 0.025). Mean forward flexion range was 143° (rTSA) vs 109° (ORIF) (p < 0.001). Mean abduction range was 135° (rTSA) vs 110° (ORIF) (p = 0.025). There was a higher number of complications observed for ORIF (3) than rTSA (1) (p = 0.297) and a higher number of re-operations for ORIF (3) than rTSA (1) (p = 0.297), which was not statistically significant. CONCLUSION: rTSA appears to yield a slower recovery at 3 months but a better outcome at 2 years. It is a promising treatment for geriatrics with three- and four-part proximal humerus fractures aiming for a better long-term functional outcome.

Should nails be locked dynamically or statically in atypical femoral fractures? - A radiological analysis of time to union and reoperations in 236 displaced fractures with 4 years average follow-up.

INTRODUCTION: Atypical femoral fractures (AFFs) are associated with delayed union and higher reoperation rates. Axial dynamization of intramedullary nails is hypothesized to reduce time-to-union (TTU) and fixation failure as compared to static locking. METHODS: Consecutive acutely displaced AFFs fixed with long intramedullary nails across five centres between 2006 and 2021 with a minimum postoperative follow-up of three months were retrospectively reviewed. The primary outcome was TTU, compared between AFFs treated with dynamically or statically locked intramedullary nails. Fracture union was defined as a modified Radiographic Union Score for Tibial fractures score of 13 or greater. Secondary outcomes involved revision surgery and treatment failure, defined as non-union beyond 18 months or revision internal fixation for mechanical reasons. RESULTS: A total of 236 AFFs (127 dynamically locked and 109 statically locked) were analysed with good interobserver reliability of fracture union assessment (intraclass correlation coefficient = 0.89; 95% CI = 0.82-0.98). AFFs treated with dynamized nails had significantly shorter median TTU (10.1 months; 95% CI = 9.24-10.96 vs 13.0 months; 95% CI = 10.60-15.40) (log-rank test, p = 0.019). Multivariate Cox regression revealed that dynamic locking was independently associated with greater likelihood of fracture union within 24 months (p = 0.009). Reoperations were less frequent in the dynamic locking group (18.9% vs 28.4%), although the difference was not statistically significant (p = 0.084). Static locking was an independent risk factor for reoperation (p = 0.049), as were varus reduction and lack of teriparatide use within three months of surgery. Static locking also demonstrated a higher frequency of treatment failure (39.4% vs 22.8%, p = 0.006) and was an independent predictor of treatment failure in logistic regression (p = 0.018). Other factors associated with treatment failure included varus reduction and open reduction. CONCLUSIONS: Dynamic locking of intramedullary nails in AFFs is associated with faster time to union, lower rate of non-union, and fewer treatment failures.

Development and validation of sex-specific hip fracture prediction models using electronic health records: a retrospective, population-based cohort study.

Background: Hip fracture is associated with immobility, morbidity, mortality, and high medical cost. Due to limited availability of dual-energy X-ray absorptiometry (DXA), hip fracture prediction models without using bone mineral density (BMD) data are essential. We aimed to develop and validate 10-year sex-specific hip fracture prediction models using electronic health records (EHR) without BMD. Methods: In this retrospective, population-based cohort study, anonymized medical records were retrieved from the Clinical Data Analysis and Reporting System for public healthcare service users in Hong Kong aged ≥60 years as of 31 December 2005. A total of 161,051 individuals (91,926 female; 69,125 male) with complete follow-up from 1 January 2006 till the study end date on 31 December 2015 were included in the derivation cohort. The sex-stratified derivation cohort was randomly divided into 80% training and 20% internal testing datasets. An independent validation cohort comprised 3046 community-dwelling participants aged ≥60 years as of 31 December 2005 from the Hong Kong Osteoporosis Study, a prospective cohort which recruited participants between 1995 and 2010. With 395 potential predictors (age, diagnosis, and drug prescription records from EHR), 10-year sex-specific hip fracture prediction models were developed using stepwise selection by logistic regression (LR) and four machine learning (ML) algorithms (gradient boosting machine, random forest, eXtreme gradient boosting, and single-layer neural networks) in the training cohort. Model performance was evaluated in both internal and independent validation cohorts. Findings: In female, the LR model had the highest AUC (0.815; 95% Confidence Interval [CI]: 0.805-0.825) and adequate calibration in internal validation. Reclassification metrics showed the LR model had better discrimination and classification performance than the ML algorithms. Similar performance was attained by the LR model in independent validation, with high AUC (0.841; 95% CI: 0.807-0.87) comparable to other ML algorithms. In internal validation for male, LR model had high AUC (0.818; 95% CI: 0.801-0.834) and it outperformed all ML models as indicated by reclassification metrics, with adequate calibration. In independent validation, the LR model had high AUC (0.898; 95% CI: 0.857-0.939) comparable to ML algorithms. Reclassification metrics demonstrated that LR model had the best discrimination performance. Interpretation: Even without using BMD data, the 10-year hip fracture prediction models developed by conventional LR had better discrimination performance than the models developed by ML algorithms. Upon further validation in independent cohorts, the LR models could be integrated into the routine clinical workflow, aiding the identification of people at high risk for DXA scan. Funding: Health and Medical Research Fund, Health Bureau, Hong Kong SAR Government (reference: 17181381).

Defining the fit and ideal entry site of the fibula rod system--a computed tomography based study in elderly patients with lower limb infections, vascular diseases or tumors.

OBJECTIVES: To determine the configuration of the distal fibula anatomy and the fitness of the Fibula Rod System (Acumed®, Hillsboro, Oregon) in a series of fibula models and to determine the optimal entry site of the rod. METHODS: Consecutive series of computed tomography (CT) of tibias and fibulae with no fracture or deformity were converted to stereo-lithograph format, and imported into Meshmixer software (Autodesk, San Rafael, California). A 3.6 × 180 mm fibula rod model was virtually inserted to best fit the intramedullary canal of the fibula model and to a depth of 0 mm proud at the distal fibula. The location of the entry point in relationship to the fibular tip, and the distance between the rod and the lateral fibula cortex were measured. RESULTS: CT of 41 fibulae (23 male and 18 female patients) contributed to the three-dimensional fibula modeling. The entry point was 3.5 mm (SD 2.0) medial to (in mortise view) and 1.0 mm (SD 2.1) anterior to (in lateral view) the fibular tip. The fibula rod was inserted to a depth of 6.2 mm (SD 2.1) proximal to the fibula tip. The mean shortest distance of the rod to the outer cortex was 1.88 mm (SD 0.87). There was a breach of the posterolateral cortex in one patient. CONCLUSION: The guide pin entry site of fibula rod should be medial and anterior offset with reference to the fibula tip, in contrary to the distal tip as recommended in the manual. There is a chance of breaching the posterolateral cortex with rod entry.

Surgeon-designed patient-specific instrumentation improves glenoid component screw placement for reverse total shoulder arthroplasty in a population with small glenoid dimensions.

PURPOSE: Glenoid component loosening is a potential complication of reverse total shoulder arthroplasty (rTSA), occurring in part due to lack of adequate screw purchase in quality scapular bone stock. This study was to determine the efficacy of a surgeon-designed, 3D-printed patient-specific instrumentation (PSI) compared to conventional instrumentation (CI) in achieving longer superior and inferior screw lengths for glenoid component fixation. METHODS: A multi-centre retrospective analysis of patients who underwent rTSA between 2015 and 2020. Lengths of the superior and inferior locking screws inserted for fixation of the glenoid baseplate component were recorded and compared according to whether patients received PSI or CI. Secondary outcomes included operative duration and incidence of complications requiring revision surgery. RESULTS: Seventy-three patients (31 PSI vs. 42 CI) were analysed. Average glenoid diameter was 24.5 mm (SD: 3.1) and 81% of patients had smaller glenoid dimensions compared to the baseplate itself. PSI produced significantly longer superior (44.7 vs. 30.7 mm; P < 0.001) and inferior (43.0 vs. 31 mm; P < 0.001) mean screw lengths, as compared to CI. A greater proportion of maximal screw lengths for the given rTSA construct (48 mm) were observed in the PSI group (71.9% vs. 11.9% superior, 59.4% vs. 11.9% inferior). Operative duration was not statistically significantly different between the PSI and CI groups (150 min vs. 169 min, respectively; P = 0.229). No patients had radiographic loosening of the glenoid component with an average of 2-year follow-up. CONCLUSION: PSI facilitates longer superior and inferior screw placement in the fixation of the glenoid component for rTSA. With sufficient training, PSI can be designed and implemented by surgeons themselves.

Can a Wireless Full-HD Head Mounted Display System Improve Knee Arthroscopy Performance? - A Randomized Study Using a Knee Simulator.

INTRODUCTION: Our prototype wireless full-HD Augmented Reality Head-Mounted Display (AR-HMD) aims to eliminate surgeon head turning and reduce theater clutter. Learning and performance versus TV Monitors (TVM) is evaluated in simulated knee arthroscopy. METHODS: 19 surgeons and 19 novices were randomized into either the control group (A) or intervention group (B) and tasked to perform 5 simulated loose-body retrieval procedures on a bench-top knee arthroscopy simulator. A cross-over study design was adopted whereby subjects alternated between devices during trials 1-3, deemed the "Unfamiliar" phase, and then used the same device consecutively in trials 4-5, to assess performance in a more "Familiarized" state. Measured outcomes were time-to-completion and incidence of bead drops. RESULTS: In the unfamiliar phase, HMD had 67% longer mean time-to-completion than TVM (194.7 ± 152.6s vs 116.7 ± 78.7s, P < .001). Once familiarized, HMD remained inferior to TVM, with 48% longer completion times (133.8 ± 123.3s vs 90.6 ± 55s, P = .052). Cox regression revealed device type (OR = 0.526, CI 0.391-0.709, P < .001) and number of procedure repetitions (OR = 1.186, CI 1.072-1.311, P = .001) are significantly and independently related to faster time-to-completion. However, experience is not a significant factor (OR = 1.301, CI 0.971-1.741, P = .078). Bead drops were similar between the groups in both unfamiliar (HMD: 27 vs TVM: 22, P = .65) and familiarized phases (HMD: 11 vs TVM: 17, P = .97). CONCLUSION: Arthroscopic procedures continue to be better performed under conventional TVM. However, similar quality levels can be reached by HMD when given more time. Given the theoretical advantages, further research into improving HMD designs is advocated.

Outcomes of fracture-related infections - do organism, depth of involvement, and temporality count?

Purpose: To determine mortality and outcomes of patients diagnosed with fracture-related infections (FRIs).Methods: FRI patients treated at a trauma centre between 2001 and 2020 were analysed. The primary outcome was 1-year mortality; mortality associations with FRI organism, depth of involvement, and temporality were investigated with multivariable survival analysis. Healthcare-associated and serological outcomes were reported as secondary outcomes. Results: 311 FRIs with mean age of 67.0 and median Charlson comorbidity index of 0 were analysed. Methicillin-sensitive Staphylococcus aureus (MSSA) (29.9%) was the most frequently implicated organism. The majority of FRIs were deep infections (62.7%). FRIs were diagnosed at a median of 40 (IQR 15-200) days post index surgery. The mean follow-up was 5.9 years. One-year mortality amounted to 17.7%. MSSA FRIs were associated with better survival (adj HR 0.34, 95%CI 0.15-0.76, p = 0.008). There was no difference in survivorship between deep or superficial FRI (adj HR 0.86, 95%CI 0.62-1.19, p = 0.353) or in relation to onset time (adj HR 1.0, 95%CI 0.99-1.00, p = 0.943). Implant removal or debridement alone was performed in 61.7% and 17% respectively. Antibiotics was prescribed for 53 (IQR 23-110) days, and patients were hospitalised for 39 (IQR 19-78) days. CRP and ESR normalised in 70.3% (median 46 days) and 53.8% (median 86 days) patients respectively. Conclusion: Fracture-related infections are associated with significant mortality and morbidity regardless of depth and temporality. Non-MSSA FRIs are associated with inferior survival.

Recommendations on the post-acute management of the osteoporotic fracture - Patients with "very-high" Re-fracture risk.

Osteoporosis is a systemic skeletal disease where there is low bone mass and deterioration of bone microarchitecture, leading to an increased risk of a fragility fracture. The aim of this clinical guideline from Fragility Fracture Network Hong Kong SAR, is to provide evidence-based recommendations on the post-acute treatment of the osteoporotic fracture patient that presents for clinical care at the Fracture Liaison Service (FLS). It is now well established that the incidence of a second fracture is especially high after the first 2 years of the initial osteoporotic fracture. Therefore, the recent osteoporotic fracture should be categorized as "very-high" re-fracture risk. Due to the significant number of silent vertebral fractures in the elderly population, it is also recommended that vertebral fracture assessment (VFA) should be incorporated into FLS. This would have diagnostic and treatment implications for the osteoporotic fracture patient. The use of a potent anti-osteoporotic agent, and preferably an anabolic followed by an anti-resorptive agent should be considered, as larger improvements in BMD is strongly associated with a reduction in fractures. Managing other risk factors including falls and sarcopenia are imperative during rehabilitation and prevention of another fracture. Although of low incidence, one should remain vigilant of the atypical femoral fracture. The aging population is increasing worldwide, and it is expected that the treatment of osteoporotic fractures will be routine. The recommendations are anticipated to aid in the daily clinical practice for clinicians. The Translational potential of this article: Fragility fractures have become a common encounter in clinical practise in the hospital setting. This article provides recommendations on the post-acute management of fragility fracture patients at the FLS.

3D printing in fracture treatment : Current practice and best practice consensus.

The use of 3D printing in orthopedic trauma is supported by clinical evidence. Existing computed tomography (CT) data are exploited for better stereotactic identification of morphological features of the fracture and enhanced surgical planning. Due to complex logistic, technical and resource constraints, deployment of 3D printing is not straightforward from the hospital management perspective. As a result not all trauma surgeons are able to confidently integrate 3D printing into the daily practice. We carried out an expert panel survey on six trauma units which utilized 3D printing routinely. The most frequent indications are acetabular and articular fractures and malalignments. Infrastructure and manpower structure varied between units. The installation of industrial grade machines and dedicated software as well as the use of trained personnel can enhance the capacity and reliability of fracture treatment. Setting up interdisciplinary jointly used 3d printing departments with sound financial and management structures may improve sustainability. The sometimes substantial logistic and technical barriers which impede the rapid delivery of 3D printed models are discussed.

Acupuncture for de Quervain's tenosynovitis: A randomized controlled trial.

BACKGROUND: Acupuncture has been an alternative approach for de Quervain's tenosynovitis (DQt), but trial evidence is still lacking. PURPOSE: This study aimed to assess the efficacy of acupuncture in patients with DQt. STUDY DESIGN: A randomized controlled trial. METHODS: A total of 68 subjects with DQt were recruited from outpatients of Department of Orthopaedics and Traumatology, and Chinese medicine clinics, The University of Hong Kong, and were randomized into the acupuncture group (n = 34) and the waitlist group (n = 34). Subjects in the acupuncture group received 5 acupuncture sessions over 2 weeks, followed by a 10-week follow-up. The waitlist control group received assessments only in the first 6 weeks of the waiting period and received the same acupuncture treatment and follow-up as the treatment group in the next 12 weeks. The primary outcome was the general pain intensity using the Visual Analogue Scale (VAS) at the end of treatment (week 2). Secondary outcomes were grip and pinch strengths of affected hands, the quick Disabilities of the Arm, Shoulder and Hand Score (Q-DASH), and the World Health Organization Quality of Life-brief Questionnaire (WHOQOL-BREF) at weeks 2 and 6. RESULTS: From baseline to 2 weeks, the mean VAS score decreased by 19.5 points in the acupuncture group and by 3.4 points in the waitlist group. The difference for acupuncture vs waitlist control was -16.2 points (95% CI, -26.7 to -5.6, p = 0.003). Acupuncture effects sustained for 10 weeks (mean difference compared with baseline, -30.6; 95% CI, -39.6 to -21.7). Secondary outcomes showed that acupuncture reduced pain intensity, improved grip and pinch strength of affected hands, and Q-DASH scores, but not the scores of WHOQOL-BREF in patients. No serious adverse event occurred during the study period. CONCLUSIONS: Our findings support that 2-week of acupuncture is safe and effective in the reduction of pain intensity, and improvement of strengths and disabilities of hand in DQt patients. Acupuncture also has long-term effects on DQt. TRIAL REGISTRATION: This study was registered at clinicaltrials.gov (NCT03472443).

[3D printing in fracture treatment : Current practice and best practice consensus]. / 3D-Druck in der Frakturversorgung : Aktuelle Praxis und "Best-practice"-Konsens.

The use of 3D printing in orthopedic trauma is supported by clinical evidence. Existing computed tomography (CT) data are exploited for better stereotactic identification of morphological features of the fracture and enhanced surgical planning. Due to complex logistic, technical and resource constraints, deployment of 3D printing is not straightforward from the hospital management perspective. As a result not all trauma surgeons are able to confidently integrate 3D printing into the daily practice. We carried out an expert panel survey on six trauma units which utilized 3D printing routinely. The most frequent indications are acetabular and articular fractures and malalignments. Infrastructure and manpower structure varied between units. The installation of industrial grade machines and dedicated software as well as the use of trained personnel can enhance the capacity and reliability of fracture treatment. Setting up interdisciplinary jointly used 3d printing departments with sound financial and management structures may improve sustainability. The sometimes substantial logistic and technical barriers which impede the rapid delivery of 3D printed models are discussed.

Orthogeriatric Multidisciplinary Co-Management Across Acute and Rehabilitation Care Improves Length of Stay, Functional Outcomes and Complications in Geriatric Hip Fracture Patients.

Introduction: As the global number of geriatric hip fracture cases continues to proliferate, a newly developed orthogeriatric co-management multidisciplinary care model has been implemented since November 2018 to meet further increases in demand. Our objective was to evaluate the effectiveness of the new pathway in improving the clinical outcomes of fragility hip fractures. Methods: The data of geriatric hip fracture patients from 1 April 2018 till 30 October 2018 was collected as the conventional orthopaedic care model (pre-orthogeriatric care model) to compare with data from the orthogeriatric co-management model, 1 Feb 2019 till 31 August 2019. Clinical outcomes were analyzed between the groups, with the efficiency of the programme reflected in the total length of stay in acute and convalescent hospitals. Results: 194 patients were recruited to the conventional group and 207 were recruited to the orthogeriatric group, 290 patients (72.3%) were female. The mean (SD) patient age was 84.2 (7.9) years. The median length of stay in the acute and rehabilitation hospitals decreased by 1 day and 2 days, respectively (P=.001). The orthogeriatric group was associated with a higher Modified Barthel Index score on discharge from the rehabilitation hospital and more patients in the orthogeriatric collaboration group received osteoporosis medication prescription within one year after the index fracture. There was no difference in the 28-days unplanned readmission rate, complication rate, mortality rate or Elderly Mobility Scale scores on discharge from the rehabilitation hospital between the two groups. Conclusion: Orthogeriatric collaboration has been proven to be effective in terms of a decreased length of stay in both the acute and the rehabilitation hospitals.

Operative management of midshaft clavicle fractures demonstrates better long-term outcomes: A systematic review and meta-analysis of randomised controlled trials.

INTRODUCTION: Midshaft clavicular fractures are common amongst young adults. Conservative or surgical treatment for definitive fracture management has been widely debate, both with their pros and cons. Previous meta-analyses compared the clinical outcomes between conservative and surgical treatment options of midshaft clavicular fractures but failed to elucidate any difference in functional improvement. We postulate that functional improvement after fracture union plateaus and the clinical outcome after treatment varies at different time points. This meta-analysis will focus on the synthesis comparison of outcomes at early, short-term results (3 months), intermediate-term (6 to 12 months) and long-term (>24 months) clinical outcomes. METHODS: A systematic search was done on databases (Pubmed, Embase, Medline, Cochrane) in June 2021. Search keywords were: midshaft clavicular fractures and clinical trials. Clinical trials fulfilling the inclusion criteria were selected for comparison and the clinical outcomes of midshaft clavicular fractures using surgical and non-surgical interventions in terms of improvement in the Disabilities of the Arm, Shoulder and Hand (DASH) score, Constant-Murley Score (CMS), time to union and risk ratio of treatment related complications were analysed in correlation with post-treatment timeframe. RESULTS: Of the 3094 patients of mean age 36.7 years in the 31 selected studies, surgical intervention was associated with improved DASH score (standard-mean difference SMD -0.22, 95% CI -0.36 to -0.07, p = 0.003; mean difference MD -1.72, 95% CI -2.93 to -0.51, p = 0.005), CMS (SMD 0.44, 95% CI 0.17-0.72, p = 0.001; MD 3.64, 95% CI 1.09 to 6.19, p = 0.005), time to union (non-adjusted SMD -2.83, 95% CI -4.59 to -1.07, p = 0.002; adjusted SMD -0.69, 95% CI -0.97 to -0.41, p<0.001) and risk ratio of bone-related complications including bone non-union, malunion and implant failure (0.21, 95% CI 0.1 to 0.42; p<0.001). Subgroup analysis based on time period after treatment showed that surgical intervention was far superior in terms of improved DASH score at the intermediate-term results (6-12 months later, SMD -0.16, 95% CI -0.30 to -0.02, p = 0.02; and long term results (>24 months SMD -4.24, 95% CI -7.03 to -1.45, p = 0.003) and CMS (>24 months, SMD 1.03, 95% CI 0.39 to 1.68, p = 0.002; MD 5.77, 95% CI 1.63 to 9.91, p = 0.006). Surgical outcome is independent of fixation with plates or intra-medullary nails. CONCLUSION: Surgical intervention was associated with better clinical outcomes compared with non-surgical approach for midshaft clavicular fractures in terms of improvement in functional scores DASH, CMS, time to union and fracture related complications, although not to the minimal clinically significant difference. Benefits in the long-term functional improvements are more pronounced.

Corrigendum: The Development of a Magnesium-Releasing and Long-Term Mechanically Stable Calcium Phosphate Bone Cement Possessing Osteogenic and Immunomodulation Effects for Promoting Bone Fracture Regeneration.

[This corrects the article DOI: 10.3389/fbioe.2021.803723.].

Patient-specific 3D-printed helmet for post-craniectomy defect - a case report.

BACKGROUND: Patients who undergo decompressive craniectomy (DC) are often fitted with a helmet that protects the craniectomy site from injury during rehabilitation. However, conventional "one-size-fits-all" helmets may not be feasible for certain craniectomy defects. We describe the production and use of a custom 3D-printed helmet for a DC patient where a conventional helmet was not feasible due to the craniectomy defect configuration. CASE PRESENTATION: A 65-year-old male with ethmoid sinonasal carcinoma underwent cranionasal resection and DC with free vastus lateralis flap reconstruction to treat cerebrospinal fluid leakage. He required an external helmet to protect the craniectomy site, however, the rim of a conventional helmet compressed the craniectomy site, and the straps compressed the vascular pedicle of the muscle flap. Computed topography (CT) scans of the patient's cranium were imported into 3D modelling software and used to fabricate a patient-specific, strapless helmet using fused deposition modelling (FDM). The final helmet fit the patient perfectly and circumvented the compression issues, while also providing better cosmesis than the conventional helmet. Four months postoperatively, the helmet remains intact and in use. CONCLUSIONS: 3D printing can be used to produce low-volume, patient-specific external devices for rehabilitation where standardized adjuncts are not optimal. Once initial start-up costs and training are overcome, these devices can be produced by surgeons themselves to meet a wide range of clinical needs.

Topical administration of tranexamic acid in elderly patients undergoing short femoral nailing for intertrochanteric fracture: A randomised controlled trial.

INTRODUCTION: Topical application of tranexamic acid (TXA) has been proposed as an alternative to intravenous administration to reduce perioperative bleeding in orthopaedic surgery. The purpose of this randomised controlled trial was to evaluate the efficacy and safety of 1 g topically applied TXA in patients undergoing fixation of intertrochanteric hip fractures by short femoral nailing. METHODS: A total of 121 patients were enrolled between May 2018 and January 2020. Patients were randomly allocated (1:1) to receive either 10 mL (1 g) of TXA or 10 mL of normal saline (NS) injected through the subfascial drain following wound closure. Total blood loss, total drain output and blood transfusion requirements up to postoperative day 3 were recorded. Rates of thromboembolic complications and mortality up to 90 days postoperatively were also compared. RESULTS: There was no statistically significant difference in total blood loss, total drain output or proportion of patients requiring transfusions. Median total blood loss was 1.088 L (IQR: 0.760-1.795) in the TXA group and 1.078 L (IQR: 0.797-1.722) in the NS group (P = .703). Median total drain output was 60 mL (IQR: 40-140) in the TXA group and 70 mL (IQR: 30-168) in the NS group (P = .696). Blood transfusions were administered in 29 patients (47.5%) in the TXA group and 27 patients (45.0%) in the NS group (P = .782). There was also no difference in frequency of thrombotic complications or mortality within 90 days. There were five thrombotic events in the TXA group and four in the NS group (P = .751). The 90-day mortality rate was 6.6% (4 patients) in the TXA group and 3.3% (2 patients) in the NS group (P = .680). CONCLUSION: A 1 g dose of topically administered TXA did not produce any difference in blood loss, transfusion requirements, thromboembolic complications, or 90-day mortality. Future trials may consider the effect of larger doses in patients undergoing hip fracture fixation surgery.