RESUMEN
Our society largely relies on inorganic semiconductor devices which are, so far, fabricated using expensive and complex processes requiring ultra-high vacuum equipment. Here we report on the possibility of growing a p-n junction taking advantage of electrochemical processes based on the use of aqueous solutions. The growth of the junction has been carried out using the Electrochemical Atomic Layer Deposition (E-ALD) technique, which allowed to sequentially deposit two different semiconductors, CdS and Cu2S, on an Ag(111) substrate, in a single procedure. The growth process was monitored inâ situ by Surface X-Ray Diffraction (SXRD) and resulted in the fabrication of a thin double-layer structure with a high degree of crystallographic order and a well-defined interface. The high-performance electrical characteristics of the device were analysed ex-situ and show the characteristic feature of a diode.
RESUMEN
Charge transfer (CT) crystals exhibit unique electronic and magnetic properties with interesting applications. We present a rational and easy guide which allows to foresee the effective charge transfer co-crystal production and that is based on the comparison of the frontier molecular orbital (MO) energies of a donor and acceptor couple. For the sake of comparison, theoretical calculations have been carried out by using the cheap and fast PM6 semiempirical Hamiltonian and pure HF/cc-pVTZ level of the theory. The results are then compared with experimental results obtained both by chemical (bromine and iodine were used as the acceptor) and electrochemical doping (exploiting an original experimental set-up by this laboratory: the electrochemical transistor). Infra-red vibrational experimental results and theoretically calculated spectra are compared to assess both the effective donor-acceptor (D/A) charge-transfer and transport mechanism (giant IRAV polaron signature). XPS spectra have been collected (carbon (1â s) and iodine (3d5/2)) signals, yielding further evidence of the effective formation of the CT anthracene:iodine complex.
RESUMEN
This research investigates the difference between products obtained through two hydrothermal carbonization treatments. Our aim is to synthesize metal-free, carbon-based catalysts for the oxygen reduction reaction (ORR) to serve as efficient and cost-effective alternatives to platinum-based catalysts. Catalysts synthesized using the traditional hydrothermal approach exhibit a higher electrocatalytic activity for ORR in alkaline media, despite their more energy-intensive production process. The superior performance is attributed to differences in the particle morphology and the chemical composition of the particle surfaces. The presence of functional groups on the surfaces of catalysts obtained via a traditional approach significantly enhances ORR activity by facilitating deprotonation reactions in an alkaline environment. Our research aims to provide a reference for future investigations, shifting the focus to the fine-tuning of surface chemical compositions and morphologies of metal-free catalysts to enhance ORR activity.
RESUMEN
Enantio-discrimination and spin-dependent electrochemistry (SDE), as a manifestation of the chirality-induced spin selectivity (CISS) effect, are important phenomena that can be probed by "chiral" electrochemistry. Here, we prepared chiralized surfaces of gold and nickel, to serve as working electrodes, through effective chemisorption of enantiopure dimethyl-bis(ethylenedithio)-tetrathiafulvalene (DM-BEDT-TTF) 1, tetramethyl-bis(ethylenedithio)-tetrathiafulvalene (TM-BEDT-TTF) 2, and their capped silver nanoparticle (AgNPs) aggregate by simple incubation of the metallic substrates. The effective chemisorption was checked by means of ultrahigh vacuum x-ray photoelectron spectroscopy (XPS) and by electro-desorption experiments, i.e., cyclic voltammetry (CV) scans showing a first electro-desorption peak at about -1.0 V. The Au|1 and Au|2 chiral electrodes were successfully used in CV experiments exploiting chiral redox probes. Finally, the hybrid interfaces Ni|enantiopure 1 or 2|AgNPs served as working electrodes in SDE experiments. In particular, the hybrid chiral interfaces Ni|(R)-2|AgNPs and Ni|(S)-2|AgNPs exhibited a significant spin-filtering ability, as a manifestation of the CISS effect, with average spin polarization values of 15%.
RESUMEN
The oxygen reduction reaction (ORR) is the key for oxygen-based respiration and the operation of fuel cells. It involves the transmission of two pairs of electrons. We probed what type of interaction between the electrons is required to enable their efficient transfer into the oxygen. We show experimentally that the transfer of the electrons is controlled by the "hidden property" and present a theoretical model suggesting that it is related to coherent phase relations between the two electrons. Using spin polarization electrochemical measurements, with electrodes coated with different thicknesses of chiral coating, we confirm the special relation between the electrons. This relation is destroyed by multiple scattering events that result in the formation of hydrogen peroxide, which indicates a reduction in the ORR efficiency. Another indication for the possible role of coherence is the fluctuations in the reaction efficiency as a function of thickness of the chiral coated electrode.
RESUMEN
A gold surface is functionalized by chemisorption of the enantiopure N,N'-bis-[2,2';5',2â³]tert-thiophene-5-yl methylcyclohexane-1,2-diamine (2T3N), a chiral oligothiophene derivative, via overnight incubation in a 2T3N ethanol solution. The Au|2T3N interface is characterized by x-ray photoelectron circular dichroism and comparing x-ray photoemission spectroscopy and electro-desorption results. Charge transmission at the Au|2T3N| solution interface is characterized by recording the cyclic voltammetry of the Fe(III)/Fe(II) reversible redox couple, finding a charge transfer rate constant, k°, variation from 1 × 10-1 to 3.3 × 10-2 cm s-1, when comparing the bare Au and the Au|2T3N interfaces, respectively. The "anomalous" high value of k° found for the chiral Au|2T3N interface can be rationalized on the basis of the chiral-induced spin selectivity effect, as further proved by magnetic-conductive atomic force microscopy measurements at room temperature. A spin polarization of about 30% is found.
RESUMEN
Over the past two decades, the chirality-induced spin selectivity (CISS) effect was reported in several experiments disclosing a unique connection between chirality and electron spin. Recent theoretical works highlighted time-resolved Electron Paramagnetic Resonance (trEPR) as a powerful tool to directly detect the spin polarization resulting from CISS. Here, we report a first attempt to detect CISS at the molecular level by linking the pyrene electron donor to the fullerene acceptor with chiral peptide bridges of different length and electric dipole moment. The dyads are investigated by an array of techniques, including cyclic voltammetry, steady-state and transient optical spectroscopies, and trEPR. Despite the promising energy alignment of the electronic levels, our multi-technique analysis reveals no evidence of electron transfer (ET), highlighting the challenges of spectroscopic detection of CISS. However, the analysis allows the formulation of guidelines for the design of chiral organic model systems suitable to directly probe CISS-polarized ET.
RESUMEN
This work reports on the electrochemical behaviour of Fe and Zn based metal-organic framework (MOF) compounds, which are "doped" with chiral molecules, namely: cysteine and camphor sulfonic acid. Their electrochemical behaviour was thoroughly investigated via "solid-state" electrochemical measurements, exploiting an "ad hoc" tailored experimental set-up: a paste obtained by carefully mixing the MOF with graphite powder is deposited on a glassy carbon (GC) surface. The latter serves as the working electrode (WE) in cyclic voltammetry (CV) measurements. Infrared (IR), X-ray diffraction (XRD) and absorbance (UV-Vis) techniques are exploited for a further characterization of the MOFs' structural and electronic properties. The experimental results are then compared with DFT based quantum mechanical calculations. The electronic and structural properties of the MOFs synthesized in this study depend mainly on the type of metal center, and to a minor extent on the chemical nature of the dopant.
RESUMEN
A method for the determination of the intermetallic diffusion coefficient in the Cu-Au system is described based on energy dispersive X-ray techniques. XRF and EDS analysis were used to measure the thickness of the electroplated gold coating and the copper diffused through it, respectively. This information was used to obtain the diffusion coefficient through an equation based on Fick's law. Colour measurements and metallographic section analysis of the samples were also performed to evaluate alternative methods for a qualitative determination of diffusion rate. The thickness of the gold layer was chosen in agreement with what is used in decorative and functional applications (<1 µm). The measurements were performed on samples heated in a range of temperatures between 100 °C and 200 °C from 12 to 96 h. The results obtained follow a linear trend between the logarithm of the diffusion coefficient and the inverse of the temperature and are in line with the values found in the literature.
Asunto(s)
Cobre , Oro , Microanálisis por Sonda Electrónica/métodos , Difusión , CalorRESUMEN
Ultrathin films of a stereoisomeric mixture of benzo[1,2-b:4,5-b']dithiophene derivatives were grown by thermal evaporation in vacuum on Au(111), and they were studied in situ by photoelectron spectroscopy. X-ray photons from a non-monochromatic Mg Kα conventional X-ray source and UV photons from a He I discharge lamp equipped with a linear polarizer were used. He I photoemission results were compared with density functional theory (DFT) calculations: density of states (DOS) and 3D molecular orbital density distribution. Au 4f, C 1s, O 1s, and S 2p core-level components suggest a surface rearrangement as a function of film nominal thickness, with the variation of the molecular orientation, from flat-laying at the initial deposition to tilted toward the surface normal at coverages exceeding 2 nm. Eventually, the DFT results were exploited in assigning of the valence band experimental structures. Moreover, polarization-dependent photoemission confirmed the tilted arrangement of the molecules, starting at 2 nm. A variation of the work function of 1.4 eV with respect to the clean substrate was measured, together with a valence band offset of 1.3 eV between the organic layer and gold.
RESUMEN
The oxygen reduction reaction (ORR) is of high importance, among others, because of its role in cellular respiration and in the operation of fuel cells. Recently, a possible relation between respiration and general anesthesia has been found. This work aims to explore whether anesthesia related gases affect the ORR. In ORR, oxygen which is in its triplet ground state is reduced to form products that are all in the singlet state. While this process is "in principle" forbidden because of spin conservation, it is known that if the electrons transferred in the ORR are spin-polarized, the reaction occurs efficiently. Here we show, in electrochemical experiments, that the efficiency of the oxygen reduction is reduced by the presence of general anesthetics in solution. We suggest that a spin-orbit coupling to the anesthetics depolarizes the spins. This causes both a reduction in reaction efficiency and a change in the reaction products. The findings may point to a possible relation between ORR efficiency and anesthetic action.
Asunto(s)
Anestesia , Anestésicos por Inhalación , OxígenoRESUMEN
This paper studies the mechanism of electrochemically induced carbon-bromine dissociation in 1-Br-2-methylnaphalene in the reduction regime. In particular, the bond dissociation of the relevant radical anion is disassembled at a molecular level, exploiting quantum mechanical calculations including steady-state, equilibrium and dissociation dynamics via dynamic reaction coordinate (DRC) calculations. DRC is a molecular-dynamic-based calculation relying on an ab initio potential surface. This is to achieve a detailed picture of the dissociation process in an elementary molecular detail. From a thermodynamic point of view, all the reaction paths examined are energetically feasible. The obtained results suggest that the carbon halogen bond dissociates following the first electron uptake follow a stepwise mechanism. Indeed, the formation of the bromide anion and an organic radical occurs. The latter reacts to form a binaphthalene intrinsically chiral dimer. This paper is respectfully dedicated to Professors Anny Jutand and Christian Amatore for their outstanding contribution in the field of electrochemical catalysis and electrosynthesis.
Asunto(s)
Bromo , Carbono , Aniones , Bromo/química , Carbono/química , Electrones , NaftalenosRESUMEN
The electronic properties of a charge-transfer (donor-acceptor) semiconducting organic co-crystal, Perylene:F4-TCNQ (PE:F4) (the donor, D, is PE and the acceptor, A, is 2,3,5,6-tetrafluoro-7,7,8,8 tetracyanoquinodimethane (F4)) in its 3 : 2 stoichiometry, are experimentally and theoretically studied. This is performed by means of electron paramagnetic resonance (EPR) and solid state electrochemical techniques, such as cyclic voltammetry (CV) measurements on single crystals. In particular, solid state electrochemistry proves to be an effective tool to probe, on a macroscopic scale, the electronic characteristics of the co-crystal. However, EPR highlights the presence of spin ½ radicals localized on F4 molecules, possibly linked to defects. The experimental findings are discussed on the basis of density functional theory (DFT) based calculations, carried out using both the projector augmented wave (PAW), with "periodic boundary conditions" (pbc), method and the localized orbitals, molecular cluster, approach. In particular, a satisfying agreement is found between the experimental, 0.336 eV (electrochemical), and theoretical, 0.303 eV (PAW), band gaps. Differences with the reported optical bandgap are discussed considering excitonic effects.
RESUMEN
Controlled reduction of oxygen is important for developing clean energy technologies, such as fuel cells, and is vital to the existence of aerobic organisms. The process starts with oxygen in a triplet ground state and ends with products that are all in singlet states. Hence, spin constraints in the oxygen reduction must be considered. Here, we show that the electron transfer efficiency from chiral electrodes to oxygen (oxygen reduction reaction) is enhanced over that from achiral electrodes. We demonstrate lower overpotentials and higher current densities for chiral catalysts versus achiral ones. This finding holds even for electrodes composed of heavy metals with large spin-orbit coupling. The effect results from the spin selectivity conferred on the electron current by the chiral assemblies, the chiral-induced spin selectivity effect.
Asunto(s)
Electrones , Oxígeno , Catálisis , Electrodos , Transporte de Electrón , Oxidación-Reducción , Oxígeno/químicaRESUMEN
The ethanol electro-oxidation catalyzed by Pd in an alkaline environment involves several intermediate reaction steps promoted by the hydroxyl radical, OH. In this work, we report on the dynamical paths of the first step of this oxidation reaction, namely the hydrogen atom abstraction CH3CH2OH + OH â CH3CHOH + H2O, occurring at the Pd(111) surface and address the thermodynamic stability of the adsorbed reactants by means of quantum and molecular mechanics calculations, with special focus on the effect of the solvent. We have found that the impact of the solvent is significant for both ethanol and OH, contributing to a decrease in their adsorption free energies by a few dozen kcal mol-1 with respect to the adsorption energy under vacuum. Furthermore, we observe that hydrogen atom abstraction is enhanced for those simulation paths featuring large surface-reactant distances, namely, when the reactants weakly interact with the catalyst. The picture emerging from our study is therefore that of a catalyst whose coverage in an aqueous environment is largely dominated by OH with respect to ethanol. Nevertheless, only a small amount of them, specifically those weakly bound to the catalyst, is really active in the ethanol electro-oxidation reaction. These results open the idea of a rational design of co-catalysts based on the tuning of surface chemical properties to eventually enhance exchange current density.
RESUMEN
Recently, the new updates in legislation about drinking water control and human health have increased the demand for novel electrochemical low-cost sensors, such as potentiometric ones. Nowadays, the determination of chloride ion in aqueous solutions has attracted great attention in several fields, from industrial processes to drinking water control. Indeed, chloride plays a crucial role in corrosion, also influencing the final taste of beverages, especially coffee. The main goal is to obtain devices suitable for continuous and real-time analysis. For these reasons, we investigated the possibility to develop an easy, low-cost potentiometric chloride sensor, able to perform analysis in aqueous mediums for long immersion time and reducing the need of periodic calibration. We realized a chloride ion selective electrode made of Ag/AgCl sintered pellet and we tested its response in model solutions compatible with drinking water. The sensor was able to produce a stable, reproducible, and accurate quantification of chloride in 900 s, without the need for a preliminary calibration test. This opens the route to potential applications of this sensor in continuous, in situ, and real time measurement of chloride ions in industrial processes, with a reduced need for periodic maintenance.
Asunto(s)
Cloruros , Agua Potable , Cloruros/análisis , Agua Potable/análisis , Electrodos , Halógenos/análisis , Humanos , PotenciometríaRESUMEN
The presence of non-hexagonal rings in the honeycomb carbon arrangement of graphene produces rippled graphene layers with valuable chemical and physical properties. In principle, a bottom-up approach to introducing distortion from planarity of a graphene sheet can be achieved by careful insertion of curved polyaromatic hydrocarbons during the growth of the lattice. Corannulene, the archetype of such non-planar polyaromatic hydrocarbons, can act as an ideal wrinkling motif in 2D carbon nanostructures. Herein we report an electrochemical bottom-up method to obtain egg-box shaped nanographene structures through a polycondensation of corannulene that produces a new conducting layered material. Characterization of this new polymeric material by electrochemistry, spectroscopy, electron microscopy (SEM and TEM), scanning probe microscopy, and laser desorption-ionization time of flight mass spectrometry provides strong evidence that the anodic polymerization of corannulene, combined with electrochemically induced oxidative cyclodehydrogenations (Scholl reactions), leads to polycorannulene with a wavy graphene-like structure.
RESUMEN
The Kane-Maguire polymerization mechanism is disassembled at a molecular level by using DFT-based quantum mechanical calculations. Resorcinol electropolymerization is selected as a case study. Stationary points (transition states and intermediate species) leading to the formation of the dimer are found on the potential energy surface (PES), and elementary reactions involved in the dimer formation are characterized. The latter allow to further propagate the polymerization chain reaction, when applied recursively. In this paper, the fundamental role of the sulfate anion (a typical base electrolyte) is addressed. Investigation of the PES in terms of both stationary-state properties and of ab initio molecular dynamics results (dynamic reaction coordinate) allows the appreciation in detail of the critical role of the base electrolyte anion in making the proton dissociation from the initial radical ion, a feasible (downhill in energy) process.
RESUMEN
Results are presented concerning the influence on the water splitting process of enantiopure tartaric acid present in bulk solution. Stainless steel and electrodeposited nickel are used as working electrode (WE) surface. The latter is obtained by electrodeposition on the two poles of a magnet. The influence and role played by the chiral compound in solution has been assessed by comparing the current values, in cyclic voltammetry (CV) experiments, recorded in the potential range at which oxygen evolution reaction (OER) occurs. In the case of tartaric acid and nickel WE a spin polarization of about 4% is found. The use of the chiral environment (bulk solution) and ferromagnetic chiral Ni electrode allows for observing the OER at a more favorable potential: About 50 mV (i.e., a cathodic, less positive, shift of the potential at which the oxygen evolution is observed).
Asunto(s)
Oxígeno/química , Agua/química , Técnicas Electroquímicas , Electrodos , Galvanoplastia , EstereoisomerismoRESUMEN
Essential aspects of the chiral induced spin selectivity (CISS) effect and their implications for spin-controlled chemistry and asymmetric electrochemical reactions are described. The generation of oxygen through electrolysis is discussed as an example in which chirality-based spin-filtering and spin selection rules can be used to improve the reaction's efficiency and selectivity. Next the discussion shifts to illustrate how the spin selectivity of chiral molecules (CISS properties) allows one to use the electron spin as a chiral bias for inducing asymmetric reactions and promoting enantiospecific processes. Two enantioselective electrochemical reactions that have used polarized electron spins as a chiral reagent are described; enantioselective electroreduction to resolve an enantiomer from a racemic mixture and an oxidative electropolymerization to generate a chiral polymer from achiral monomers. A complementary approach that has used spin-polarized, but otherwise achiral, molecular films to enantiospecifically associate with one enantiomer from a racemic mixture is also discussed. Each of these reaction types use magnetized films to generate the spin polarized electrons and the enantiospecificity can be selected by choice of the magnetization direction, North pole versus South pole. Possible paths for future research in this area and its compatibility with existing methods based on chiral electrodes are discussed.