RESUMEN
Graphitic carbon nitride (g-C3N4), an organic photocatalyst was reported to have beneficial properties to be used in wastewater treatment applications. However, g-C3N4, in its bulk form was found to have poor photocatalytic degradation efficiency due to its inherent limitations such as poor specific surface area and fast electron-hole pair recombination rate. In this study, we have tuned the physiochemical properties of bulk g-C3N4 by direct thermal exfoliation (TE-g-C3N4) and examined their photocatalytic degradation efficiency against abundant textile dyes such as methylene blue (MB), methyl orange (MO), and rhodamine B (RhB). The degradation efficiencies for MB, MO, and RhB dyes are 92 ± 0.18%, 93 ± 0.31%, and 95 ± 0.4% respectively in 60 min of UV light irradiation. The degradation efficiency increased with an increase in the exfoliation temperature. The prepared catalysts were characterized using FTIR, XRD, FE-SEM, EDAX, BET, and UV-DRS. In BET analysis, TE-g-C3N4 samples showed improved surface area (48.20 m2/g) when compared to the bulk g-C3N4 (5.03 m2/g). Further, the TE-g-C3N4 had 2.98 times higher adsorption efficiency than the bulk ones. The free radicals scavenging studies revealed that the superoxide radicals played an important role in the photodegradation for dyes, when compared to the hydroxyl radical (.OH) and the photo-induced holes (h+), Photoluminescence (PL) emission and electrochemical impedance spectroscopy (EIS) spectra of TE-g-C3N4 indicated a lowered electron-hole pairs' recombination rate and an increased photo-induced charge transfer respectively. Further, the TE-g-C3N4 were found to have excellent stability for up to 5 cycles with only a minor decrease in the activity from 92% to 86.2%. These findings proved that TE-g-C3N4 was an excellent photocatalyst for the removal and degradation of textile dyes from wastewater.
RESUMEN
Molecularly imprinted polymers (MIPs), a biomimetic artificial receptor system inspired by the human body's antibody-antigen reactions, have gained significant attraction in the area of sensor development applications, especially in the areas of medical, pharmaceutical, food quality control, and the environment. MIPs are found to enhance the sensitivity and specificity of typical optical and electrochemical sensors severalfold with their precise binding to the analytes of choice. In this review, different polymerization chemistries, strategies used in the synthesis of MIPs, and various factors influencing the imprinting parameters to achieve high-performing MIPs are explained in depth. This review also highlights the recent developments in the field, such as MIP-based nanocomposites through nanoscale imprinting, MIP-based thin layers through surface imprinting, and other latest advancements in the sensor field. Furthermore, the role of MIPs in enhancing the sensitivity and specificity of sensors, especially optical and electrochemical sensors, is elaborated. In the later part of the review, applications of MIP-based optical and electrochemical sensors for the detection of biomarkers, enzymes, bacteria, viruses, and various emerging micropollutants like pharmaceutical drugs, pesticides, and heavy metal ions are discussed in detail. Finally, MIP's role in bioimaging applications is elucidated with a critical assessment of the future research directions for MIP-based biomimetic systems.
RESUMEN
Sweat, a biofluid secreted naturally from the eccrine glands of the human body, is rich in several electrolytes, metabolites, biomolecules, and even xenobiotics that enter the body through other means. Recent studies indicate a high correlation between the analytes' concentrations in the sweat and the blood, opening up sweat as a medium for disease diagnosis and other general health monitoring applications. However, low concentration of analytes in sweat is a significant limitation, requiring high-performing sensors for this application. Electrochemical sensors, due to their high sensitivity, low cost, and miniaturization, play a crucial role in realizing the potential of sweat as a key sensing medium. MXenes, recently developed anisotropic two-dimensional atomic-layered nanomaterials composed of early transition metal carbides or nitrides, are currently being explored as a material of choice for electrochemical sensors. Their large surface area, tunable electrical properties, excellent mechanical strength, good dispersibility, and biocompatibility make them attractive for bio-electrochemical sensing platforms. This review presents the recent progress made in MXene-based bio-electrochemical sensors such as wearable, implantable, and microfluidic sensors and their applications in disease diagnosis and developing point-of-care sensing platforms. Finally, the paper discusses the challenges and limitations of MXenes as a material of choice in bio-electrochemical sensors and future perspectives on this exciting material for sweat-sensing applications.