Laser Patterning of Porous Support Membranes to Enhance the Effective Surface Area of Thin-Film Composite-Facilitated Transport Membranes for CO2 Separation.

Although thin-film composite membranes have achieved great success in CO2 separation, further improvements in the CO2 permeance are required to reduce the size and cost of the CO2 separation process. Herein, we report the fabrication of composite membranes with high CO2 permeability using a laser-patterned porous membrane as the support membrane. High-aspect-ratio micropatterns with well-defined micropores on their surface were carved on microporous polymer supports by a direct laser writing process using a short-pulsed laser. By using a Galvano scanner and optimizing the laser conditions and target materials, in-plane micropatterns, such as microhole arrays, microline grating, microlattices, and out-of-plane hierarchical micropatterns, were created on porous membranes. An aqueous suspension of hydrogel microparticles doped with an amine-based mobile carrier was sprayed onto the patterned surface to form a defect-free thin separation layer. The surface area of the separation layer on the patterned support is up to 80% larger than that of flat pristine membranes, resulting in a 52% higher CO2 permeance (1106 GPU) with a CO2/N2 selectivity of 172. The laser-patterned porous membranes allow the development of inexpensive and high-performance functional membranes not only for CO2 separation but also for other applications, such as water treatment, cell culture, micro-TAS, and membrane reactors.

Imidazole tailored deep eutectic solvents for CO2 capture enhanced by hydrogen bonds.

Deep eutectic solvents (DESs) have emerged as promising alternative candidates for CO2 capture in recent years. In this work, several novel DESs were firstly prepared to enhance CO2 absorption. Structural and physical properties of DESs were investigated, as well as their absorption performance of CO2. A distinct depression in the melting point up to 80 K of DESs was observed compared with that of BMIMCl. The observed red shifts of the C2H group in an imidazolium ring and its chemical shifts downfield in NMR spectra are indicative of a hydrogen bond interaction between BMIMCl and MEA. In particular, CO2 uptake in MEA : ILs (4 : 1) at room temperature and atmospheric pressure is up to 21.4 wt%, which is higher than that of 30 wt% MEA (13%). A hydrogen bond related mechanism was proposed in which ILs act as a medium to improve CO2 uptake through hydrogen bonds. Finally, the firstly reported overall heat of CO2 absorption is slightly higher than that of 30 wt% MEA, implying that the hydrogen bonds of DESs contribute to the overall heat of CO2 absorption. This study reveals that the heat of CO2 absorption can be tailored by the proper molar ratio of MEA and ILs.