[Distribution of Typical Resistant Bacteria and Resistance Genes in Source Water of the Middle and Lower Reaches of the Yellow River].

The Yellow River water of an urban area located in the middle and lower reaches of the Yellow River was taken as the research object， in which the seasonal and along-range distribution of total culturable bacteria， typical antibiotic resistant bacteria （amoxicillin resistant bacteria and sulfamethoxazole-resistant bacteria）， and their corresponding typical resistance genes ï¼»ß-lactam resistance gene （blaCTX-M） and sulfamamide resistance genes （sulI and sulⅡ）， as well as intⅠ1 were investigated. The results showed that the total culturable bacteria， ß-lactam-resistant bacteria and sulfonamide-resistant bacteria in the Yellow River Basin were significantly affected by temperature and human activities. The composition and quantity of their genera had obvious spatiotemporal distribution characteristics， in which Bacillus and Pseudomonas were dominant in the composition and number of bacteria. The abundance of resistance genes decreased with the decrease in temperature. The proportion of ß-lactam resistance genes in the total genes was higher than that of sulfanilamide genes， and sulI was the dominant gene in sulfanilamide genes. Correlation analysis showed that class Ⅰ integron played an important role in accelerating the spread of resistance genes. This study offers insight into the status quo of water resistance pollution in the Yellow River and provides theoretical support for the risk assessment of resistance genes in the middle and lower reaches of the Yellow River Basin.

Degradation of tetracyclines via calcium peroxide activation by ultrasonic: Roles of reactive species, oxidation mechanism and toxicity evaluation.

Tetracyclines (TC) frequently detected in the aqueous environment pose threats to humans and ecosystems. The synergistic technology coupling ultrasound (US) and calcium peroxide (CaO2) has a great potential to abate TC in wastewater. However, the degradation efficiency and detailed mechanism of TC removal in the US/CaO2 system is unclear. This work was carried out to assess the performance and mechanism of TC removal in the US/CaO2 system. The results demonstrated that 99.2% of TC was degraded by the combination of 15 mM CaO2 with ultrasonic power of 400 W (20 kHz), but only about 30% and 4.5% of TC was removed by CaO2 (15 mM) or US (400 W) alone process, respectively. Experiments using specific quenchers and electron paramagnetic resonance (EPR) analysis indicated that the generation of hydroxyl radicals (•OH), superoxide radicals (O2-•), and single oxygen (1O2) in the process, whereas •OH and 1O2 were mainly responsible for the degradation of TC. The removal of TC in the US/CaO2 system has a close relationship with the ultrasonic power, the dosage of CaO2 and TC, and the initial pH. The degradation pathway of TC in the US/CaO2 process was proposed based on the detected oxidation products, and it mainly included N,N-dedimethylation, hydroxylation, and ring-opening reactions. The presence of 10 mM common inorganic anions including chloridion (Cl-), nitrate ion (NO3-), sulfate ion (SO42-), and bicarbonate ion (HCO3-) showed negligible influences on the removal of TC in the US/CaO2 system. The US/CaO2 process could efficiently remove TC in real wastewater. Overall, this work firstly demonstrated that •OH and 1O2 mainly contributed to the removal of pollutants in the US/CaO2 system, which was remarkable for understanding the mechanisms of CaO2-based oxidation process and its future application.

Phosphorus removal from municipal wastewater through a novel Trichosporon asahii BZ: Performance and mechanism.

A yeast BZ was screened from a laboratory-scale anaerobic/aerobic reactor and designated as Trichosporon asahii through 26S rDNA gene sequence analysis. The screened BZ abated over 70% of phosphorus in municipal sewage with 2-10 mg/L phosphorus in the appropriate conditions. The yeast BZ had strong adaptability to pH and the dissolved oxygen, but the cultivation temperature, carbon source, the ratio of C/P and the ratio of N/P had a critical influence on the phosphorus abatement performance of yeast BZ. The analysis of phosphorus concentration in the wastewater, cells, and extracellular polymeric substances (EPS) suggested that about 55%-66% of the removed phosphorus was in the yeast cells and 34%-45% in the EPS. The proposed probable metabolic mechanism of phosphorus in yeast BZ showed that EPS acted as a dynamic phosphorous transfer station, and most of phosphorus was transferred into yeast cells through EPS transfer station. These findings have crucial implications for the development of a promising stable and easy-operation biological phosphorus abatement process for municipal wastewater treatment.

Adsorption-Enhanced Ceramic Membrane Filtration Using Fenton Oxidation for Advanced Treatment of Refinery Wastewater: Treatment Efficiency and Membrane-Fouling Control.

With the development of the refining industry, the treatment of refinery wastewater has become an urgent problem. In this study, a ceramic membrane (CM) was combined with Fenton-activated carbon (AC) adsorption to dispose of refinery wastewater. The effect of the combined process was analyzed using excitation-emission matrix (EEM), ultraviolet-visible (UV-vis) and Fourier transform infrared spectroscopies (FTIR). Compared with direct filtration, the combined process could significantly improve the removal of organic pollution, where the removal rate of the COD and TOC could be 70% and the turbidity removal rate was above 97%. It was found that the effluent could meet the local standards. In this study, the membrane fouling was analyzed for the impact of the pretreatment on the membrane direction. The results showed that Fenton-AC absorption could effectively alleviate membrane fouling. The optimal critical flux of the combined process was increased from 60 to 82 L/(m2·h) compared with direct filtration. After running for about 20 d, the flux remained at about 55 L/(m2·h) and the membrane-fouling resistance was only 1.2 × 1012 m-1. The Hermia model revealed that cake filtration was present in the early stages of the combined process. These results could be of great use in improving the treatment efficiency and operation cycle of refinery wastewater.

Removal of phosphorus from wastewater by Diutina rugosa BL3: Efficiency and pathway.

A novel phosphorus removal yeast BL3 was isolated from an alternating anaerobic/aerobic biofilter and identified as Diutina rugosa by 26S rDNA gene sequence analysis. Yeast BL3 could effectively remove phosphorus from synthetic wastewater containing 2-20 mg/L phosphorus under optimal environmental conditions. The highest phosphorus removal efficiency was above 70% under the conditions of DO 6.86 mg/L, C/P ratios of 60, N/P ratios of 3.3, pH 6.0-9.0, and at 25.0-35.0 °C. The phosphorus distribution in the aqueous solution and different components of yeast BL3 analysis indicated that around 55%-70% and 20%-40% of removed phosphorus were transferred into extracellular polymeric substances (EPS) and yeast cells, respectively. The plausible phosphorus transfer pathway was proposed based on the phosphorus distribution and species analysis, suggesting the important role of EPS as a phosphorus reservoir. These results indicate that yeast BL3 can efficiently remove phosphorus under aerobic conditions without alternating anaerobic/aerobic cycling, and thus has significant potential for practical application in wastewater phosphorus removal.

Phosphate removal via biological process coupling with hydroxyapatite crystallization in alternating anaerobic/aerobic biofilter reactor.

In this work, a laboratory-scale alternating anaerobic/aerobic biofilter (A/O BF) filled with self-made steel slag media was constructed, where the integrated biological and crystalline phosphorus removal process was realized to remove phosphorus and achieve phosphorus recovery from wastewater. Phosphorus accumulating organisms (PAOs) were successfully enriched within 30 days operation, the maximum phosphate removal efficiency was close to 80% under the optimal conditions with the anaerobic time of 34 h, HRT of 4 h and influent COD of 300 mg/L. The analysis of SEM-EDS and XRD indicated that hydroxyapatite (HAP) crystals were formed inside biofilms without addition of chemical reagents. The high phosphate environment created by PAOs and the release of Ca2+ from the steel slag media might be responsible for the generation of HAP. These findings have crucial implications for the application BF technology to remove and recover phosphorus from wastewater.