RESUMEN
The single-chamber bio-electrical systems can degrade oily sludge in sediments while generating electricity from the microbial fuel cells (MFCs) and their characteristics in energy and environmental effects have attracted wide international attention in recent years. To explore the influence of the power generation period on the oily sludge bio-electrical system, an oily sludge bio-electrical system was constructed. The output voltage, polarization curve, power density curve, crude oil removal rate and microflora were detected during different power generation periods, respectively. The results of this study showed that under the stable power generation period, the power generation and oily sludge degradation performance of MFC are higher than the voltage rise period and voltage attenuation period. Besides, the oily sludge bio-electrical system during the stable period contained more electricity-producing bacteria than the other two periods. The voltage in the stable period of oily sludge bio-electrical system is about 280 mV, the electromotive force is 493.1 mV and the power density is 134.93 mW·m-3. It lays a foundation for the improvement of degradation of crude oil and power generation performance in oily sludge bio-electrical system.
Asunto(s)
Petróleo , Aguas del Alcantarillado , Electricidad , ClimaRESUMEN
Electricity-generating bacteria as biocatalysts for microbial fuel cells (MFCs), their species, and power generation performance determine the pollution control and power generation performance of MFCs. And there are few studies on the types and performance of electricity-generating bacteria isolated from oily sludge microbial fuel cells. For improving the power generation performance of oily sludge MFCs, an electricity-generating bacterium was isolated from the oily sludge. More importantly, the adaptability of nitrogen to phosphorus ratio, temperature, and pH of the electricity-generating bacteria were adjusted by a controlled variable method. The results of this study showed that the electricity-generating bacterium was identified as Bacillus cereus, with a rod-shaped cell, about 0.5-1.0 µm in length. The optimal nitrogen-phosphorus ratio, temperature, and pH of MFCs were 4.67:1, 25 â, and pH = 7, respectively. Its maximum power density, COD, and oil removal rate was up to 65 mW·m-3, 90.51%, and 87.76%, respectively. The study of this functional bacterium will provide beneficial assistance for the improvement of oil removal and power generation performance of oily sludge MFCs.
Asunto(s)
Fuentes de Energía Bioeléctrica , Fuentes de Energía Bioeléctrica/microbiología , Aguas del Alcantarillado/microbiología , Electrodos , Electricidad , Bacterias , NitrógenoRESUMEN
The anode is considered to be a key factor to improve the single-chamber bioelectrochemical system's efficiency to degrade oily sludge in sediment while generating electricity. There are few studies on the effect of the anode structure on the performance of oily sludge MFCs systematically. In this paper, an oily sludge bioelectrical system was constructed using carbon felt and carbon plate as anode materials, adjusting the anode material arrangement as transverse and longitudinal, and using different anode materials from single to sextuple anodes. The results of this study showed that the rate of degradation of oily sludge was greater with carbon felt (17.04%) than with the carbon plate (13.11%), with transverse (23.61%) than with the longitudinal (19.82%) arrangement of anodes, and with sextuple anodes (33.72%) than with a single anode (25.26%) in the sediment microbial fuel cells (SMFCs). A similar trend was observed when the voltage, power density, and electromotive force (EMF) of SMFCs were estimated between the carbon felt and carbon plate, transverse and longitudinal arrangements, single and sextuple anodes. It is concluded that the proper adjustment of anode arrangements, using carbon felt as an anode material, and increasing the number of anodes to six may accelerate the rate of degradation of oily sludge in oily sludge sediment microbial fuel cells (SMFCs). Furthermore, the electricity generation performance was also improved.
RESUMEN
In order to solve the problem of demulsification difficulties in Liaohe Oilfield, 24 kinds of demulsifiers were screened by using the interface generation energy (IFE) module in the molecular dynamics simulation software Materials Studio to determine the ability of demulsifier molecules to reduce the total energy of the oil-water interface after entering the oil-water interface. Neural network analysis (NNA) and genetic function approximation (GFA) were used as technical means to predict the demulsification effect of the Liaohe crude oil demulsifier. The simulation results show that the SDJ9927 demulsifier with ethylene oxide (EO) and propylene oxide (PO) values of 21 (EO) and 44 (PO) reduced the total energy and interfacial tension of the oil-water interface to the greatest extent, and the interfacial formation energy reached -640.48 Kcal/mol. NNA predicted that the water removal amount of the SDJ9927 demulsifier was 7.21 mL, with an overall error of less than 1.83. GFA predicted that the water removal amount of the SDJ9927 demulsifier was 7.41mL, with an overall error of less than 0.9. The predicted results are consistent with the experimental screening results. SDJ9927 had the highest water removal rate and the best demulsification effect. NNA and GFA had high correlation coefficients, and their R2s were 0.802 and 0.861, respectively. The higher R2 was, the more accurate the prediction accuracy was. Finally, the demulsification mechanism of the interfacial film breaking due to the collision of fluorinated polyether demulsifiers was studied. It was found that the carbon-fluorine chain had high surface activity and high stability, which could protect the carbon-carbon bond in the demulsifier molecules to ensure that there was no re-emulsion due to the stirring external force.
Asunto(s)
Simulación de Dinámica Molecular , Petróleo , Emulsiones/química , Tensión Superficial , Agua/químicaRESUMEN
This paper reported a new oily sludge compound cleaning agent formula, which used a combination of molecular simulation and experimental methods to study its interfacial formation energy (IFE), and exciting results were obtained. From a total of 24 surfactants in five categories, sodium silicate (Na2SiO3), sodium dodecylbenzene sulfonate, and fatty alcohol polyoxyethylene polyoxypropylene ether (JFC-SF) were screened out because of their excellent washing oil effect. Under a reasonable orthogonal system, when the mass ratio of the three surfactants was 3:1:1, the oil desorption effect was the best, the oil residual rate could reach 2.13%, and the oil removal efficiency could reach 93.53%. Verified by the molecular dynamics simulation module, the absolute value of the interface binding energy was the largest at this compound ratio, which was 465.71 kcal/mol. More importantly, we have discussed in depth the mechanism of adsorption and permeation of oily sludge by cleaning agents. Through single-factor influence experiments, the following optimized working condition parameters of the cleaning agent were determined: cleaning conditions with an agent content of 4%, a temperature of 70 °C, a stirring speed of 400 rpm, a cleaning time of 30 min, and a liquid-solid ratio (L/S) of 4:1. The research results laid the foundation for resource utilization, harmlessness, and reduction of oily sludge in the Liaohe oilfield.
RESUMEN
Various flooding technologies were applied in the middle and late stages of the oilfield, which made the heavy oil emulsion receive much concern because of its high stability and separation difficulty. In our paper, alcohol molecules were used as initiators and multibranched block copolymers were synthesized through open-loop polymerization technology. A variety of novel modified block polyether demulsifiers with demulsification activity were finally synthesized through water-soluble modification and oil-soluble modification, which achieved efficient demulsification of heavy oil emulsions. Hydrophile-lipophile balance (HLB) values and surface tension were used to characterize demulsifiers. In addition, their demulsification efficiency was evaluated by measuring the amount of dehydration in the separated heavy oil emulsion experiments. The experimental results showed that within 5 h, the demulsification effect of the water-soluble demulsifier is better than that of the oil-soluble demulsifier. When the HLB value of the demulsifier reaches a certain value, the dehydration rate and the demulsification effect reach the highest point. When the amount of demulsifier is 50 µg/g and the demulsification temperature is 85 °C, the dehydration rate of the water-soluble demulsifier X-6 reached 91%, the water quality was clear, and the demulsification effect reached its peak. This work will provide a novel and efficient demulsifier for demulsification and dehydration of heavy oil emulsions.
RESUMEN
Microbial fuel cell (MFC) technology is a simple way to accelerate the treatment of the oily sludge which is a major problem affecting the quality of oil fields and surrounding environment while generating electricity. To investigate the oil removal and the characteristics of changes in the composition of bacteria, sediment microbial fuel cells (SMFCs) supplemented with oily sludge was constructed. The results showed that the degradation efficiency of total petroleum hydrocarbon (TPH) of SMFC treatment was 10.1 times higher than the common anaerobic degradation. In addition, the degradation rate of n-alkanes followed the order of high carbon number > low carbon number > medium carbon number. The odd-even alkane predominance (OEP) increased, indicating that a high contribution of even alkanes whose degradation predominates. The OUT number, Shannon index, AEC index, and Chao1 index of the sludge treated with SMFC (YN2) are greater than those of the original sludge (YN1), showing that the microbial diversity of sludge increased after SMFC treatment. After SMFC treatment the relative abundance of Chloroflexi, Bacteroidia and Pseudomonadales which are essential for the degradation of the organic matter and electricity production increased significantly in YN2. These results will play a crucial role in improving the performance of oily sludge MFC.
RESUMEN
A one-step method which involves exfoliating graphite materials (GIMs) off into graphene materials (GEMs) in aqueous suspension of CL-20 and forming CL-20/graphene materials (CL-20/GEMs) composites by using ball milling is presented. The conversion of mixtures to composite form was monitored by scanning electron microscopy (SEM) and powder X-ray diffraction (XRD). The impact sensitivities of CL-20/GEM composites were contrastively investigated. It turned out that the energetic nanoscale composites based on CL-20 and GEMs comprising few layers were accomplished. The loading capacity of graphene (reduced graphene oxide, rGO) is significantly less than that of graphene oxide (GO) in CL-20/GEM composites. The formation mechanism was proposed. Via this approach, energetic nanoscale composites based on CL-20 and GO comprised few layers were accomplished. The resulted CL-20/GEM composites displayed spherical structure with nanoscale, ε-form, equal thermal stabilities, and lower sensitivities.