Effect of Selol on Tumor Morphology and Biochemical Parameters Associated with Oxidative Stress in a Prostate Tumor-Bearing Mice Model.

Prostate cancer is the leading cause of cancer death in men. Some studies suggest that selenium Se (+4) may help prevent prostate cancer. Certain forms of Se (+4), such as Selol, have shown anticancer activity with demonstrated pro-oxidative effects, which can lead to cellular damage and cell death, making them potential candidates for cancer therapy. Our recent study in healthy mice found that Selol changes the oxidative-antioxidative status in blood and tissue. However, there are no data on the effect of Selol in mice with tumors, considering that the tumor itself influences this balance. This research investigated the impact of Selol on tumor morphology and oxidative-antioxidative status in blood and tumors, which may be crucial for the formulation's effectiveness. Our study was conducted on healthy and tumor-bearing animal models, which were either administered Selol or not. We determined antioxidant enzyme activities (Se-GPx, GPx, GST, and TrxR) spectrophotometrically in blood and the tumor. Furthermore, we measured plasma prostate-specific antigen (PSA) levels, plasma and tumor malondialdehyde (MDA) concentration as a biomarker of oxidative stress, selenium (Se) concentrations and the tumor ORAC value. Additionally, we assessed the impact of Selol on tumor morphology and the expression of p53, BCL2, and Ki-67. The results indicate that treatment with Selol influences the morphology of tumor cells, indicating a potential role in inducing cell death through necrosis. Long-term supplementation with Selol increased antioxidant enzyme activity in healthy animals and triggered oxidative stress in cancer cells, activating their antioxidant defense mechanisms. This research pathway shows promise in understanding the anticancer effects of Selol. Selol appears to increase the breakdown of cancer cells more effectively in small tumors than in larger ones. In advanced tumors, it may accelerate tumor growth if used as monotherapy. Therefore, further studies are necessary to evaluate its efficacy either in combination therapy or for the prevention of recurrence.

The Impact of Organic Selenium (IV) on Hypericum perforatum L. under Cadmium Stress and Non-Stress Conditions.

The issue of soil contamination by heavy metals is widely acknowledged. Some plants, including medicinal species like St. John's wort (Hypericum perforatum L.), exhibit accumulation traits, allowing them to accumulate elevated levels of metals, e.g., cadmium (Cd), within their cells. Selenium (Se) may increase the tolerance of plants to abiotic stress caused by the presence of heavy metal in the environment. Depending on its form (oxidation state, organic/inorganic), Se influences plant growth, secondary metabolite content, and biotic stress, as well as incorporates into shoots, providing economic and health benefits for consumers. So far, there are no data on the influence of organic Se(IV) on plants. Our study aimed to determine the effect of organic Se(IV) on the growth, active compound levels (anthranoids, polyphenols), and ultrastructure of St. John's wort without and under cadmium stress. The phytochemical analysis and microscopic examination was performed on shoots from different days of St. John's wort in vitro culture on a few variants of Murashige and Skoog medium with Cd (25 and 400 µM) and/or organic Se (IV). Exposure to Se(IV) did not affect hypericins but increased the polyphenol content in the shoots and the biomass. Se(IV) caused an increase in starch grain number in chloroplasts, whereas Cd exposure resulted in the degradation of the chloroplast structure, increased cell vacuolation, as well as swollen mitochondrial cristae. The addition of Se(IV) to these combinations reduced the degree of degradation and growth inhibition and a high content of Se(IV) in plants was observed. Se(IV) had no impact on Cd content at environmental Cd concentrations, but showed an effect at extremely high Cd concentrations. Thus, organic Se(IV) has a beneficial effect on St. John's wort growth, polyphenol content, and incorporation in shoots and prevents Cd toxicity. Media enriched with organic Se(IV) have both economic advantages and health benefits due to a higher plant growth rate and increased concentrations of polyphenols with strong antioxidant properties, relatively enriched with Se. However, organic Se(IV) should be used with caution in polluted areas. In perspective, speciation analysis and molecular study are crucial to understand the fate and effect of Se (IV) on plants.

Screening the quality of legal and illegal dietary supplements by LC-MS/MS.

Dietary supplements are widely consumed. However, the lack of mandatory testing results in limited data on their quality, particularly in Eastern Europe. In this study, 21 legally registered and 9 illegal supplements, seized from an underground facility by the Polish Police, were examined. Contaminants were screened by utilising high-performance liquid chromatography coupled with untargeted mass spectrometry. The analysis identified 32 contaminants in the 30 dietary supplements examined. Untargeted analysis revealed a concerning issue: the intentional adulteration of both legal and illegal supplements with pharmacologically active substances that are prohibited in this category of products. This study indicated that many dietary supplements are of low quality due to deliberate adulteration or inadequate manufacturing conditions. The presence of unregistered or unapproved substances in these supplements poses serious health risks. Strong legal regulations are essential to address this issue effectively.

Impact of Physical Exercise on Levodopa Therapy Across Parkinson's Disease Stages.

Background: Levodopa is the gold standard of treatment in Parkinson's disease (PD). Its clinical effect changes as the disease progresses. Wearing off is a frequent first manifestation of motor fluctuations. Some patients with advanced PD report faster wearing off after physical exercise. Objective: The aim was to assess if pharmacokinetics of levodopa is influenced by physical exercise in patients with different disease advancement. Methods: 22 patients with PD (12 untreated with levodopa and 10 with motor fluctuations) and 7 healthy controls (HC) were included. Plasma samples were collected at 9 fixed timepoints following administration of levodopa/benserazide 200/50 mg for two days: rest day and standardized physical exercise day. Clinical assessment with Unified Parkinson Disease Rating Scale part III (UPDRS III) was performed in fixed timepoints. Liquid chromatography-tandem mass spectrometry was used to measure levodopa concentrations. Results: No differences between the HC, levodopa naïve and advanced PD groups were observed regarding selected pharmacokinetic parameters. In advanced PD and HC no differences in pharmacokinetic parameters of levodopa with and without effort were observed. In levodopa naïve PD group higher mean residence time after rest than after exercise (168.9±48.3 min vs. 145.5±50.8 min; p = 0.026) was observed. In advanced PD group higher UPDRS III score (14.45±5.5 versus 20.9±6.1 points, p = 0.04) was observed after exercise. Conclusions: The deterioration of motor status of advanced PD patients after physical effort is not reflected by changes in pharmacokinetics but rather mediated by central mechanisms.

Metabolomic study on ostracods exposed to environmentally relevant concentrations of five pharmaceuticals selected via a novel approach.

Pharmaceuticals (PhACs) are increasingly detected in aquatic ecosystems, yet their effects on biota remain largely unknown. The environmentally relevant concentrations of many PhACs may not result in individual-level responses, like mortality or growth inhibition, traditional toxicity endpoints. However, this doesn't imply the absence of negative effects on biota. Metabolomics offers a more sensitive approach, detecting responses at molecular and cellular levels and providing mechanistic understanding of adverse effects. We evaluated bioaccumulation and metabolic alterations in a benthic ostracod, Heterocypris incongruens, exposed to a mixture of five PhACs (carbamazepine, tiapride, tolperisone, propranolol and amlodipine) at environmentally relevant concentrations for 7 days using liquid chromatography coupled with mass spectrometry. The selection of PhACs was based, among other factors, on risk quotient values determined using toxicological data available in the literature and concentrations of PhACs quantified in our previous research in the sediments of the Odra River estuary. This represents a novel approach to PhACs selection for metabolomic studies that considers strictly quantitative data. Amlodipine and tolperisone exhibited the highest bioaccumulation. Significant impacts were observed in Alanine, aspartate and glutamate metabolism, Starch and sucrose metabolism, Arginine biosynthesis, Histidine metabolism, Tryptophan metabolism, Glycerophospholipid metabolism, and Glutathione metabolism pathways. Most of the below-individual-level responses were likely nonspecific and related to dysregulation in energy metabolism and oxidative stress response. Additionally, some pharmaceutical-specific responses were also observed. Therefore, untargeted metabolomics can be used to detect metabolic changes resulting from environmentally relevant concentrations of PhACs in aquatic ecosystems and to understand their underlying mechanism.

Molecularly Imprinted Drug Carrier for Lamotrigine-Design, Synthesis, and Characterization of Physicochemical Parameters.

This study presents the initial attempt at introducing a magnetic molecularly imprinted polymer (MIP) designed specifically for lamotrigine with the purpose of functioning as a drug carrier. First, the composition of the magnetic polymer underwent optimization based on bulk polymer adsorption studies and theoretical analyses. The magnetic MIP was synthesized from itaconic acid and ethylene glycol dimethacrylate exhibiting a drug loading capacity of 3.4 ± 0.9 µg g-1. Structural characterization was performed using powder X-ray diffraction analysis, vibrating sample magnetometry, and Fourier transform infrared spectroscopy. The resulting MIP demonstrated controlled drug released characteristics without a burst effect in the phospahe buffer saline at pH 5 and 8. These findings hold promise for the potential nasal administration of lamotrigine in future applications.

An extension of biorelevant fed-state dissolution tests to clinical pharmacokinetics - A study on gastrointestinal factors influencing rivaroxaban exposure and efficacy in atrial fibrillation patients.

A direct oral anticoagulant rivaroxaban fails to prevent stroke and systemic embolism in one-to-several percent of patients with nonvalvular atrial fibrillation (NVAF), but the reasons are unknown. The study used semi-mechanistic in vitro-in vivo prediction (IVIVP) modeling to explore the reasons for ineffective thrombosis prevention in NVAF patients. Steady-state drug concentrations in plasma were measured at 0 h (Ctrough), 3 h (C3h), and 12 h post-dosing in thirty-four patients treated with 20 mg rivaroxaban daily. The clinical data were compared against "virtual twins" generated with a novel IVIVP model that combined drug dissolution modeling, mechanistic description of gastric drug transit, and population pharmacokinetics defining the variability of drug disposition. The nonresponders had significantly lower C3h and Ctrough than the responders (p < 0.001) and the covariates included in the population pharmacokinetic submodel did not fully explain this difference. Simulations involving varied gastrointestinal parameters in the "virtual twins" revealed that lower small intestinal effective permeability (Peff), rather than a slower stomach emptying rate, could explain low rivaroxaban exposure in the nonresponders. IVIVP modeling was effectively used for exploring pharmacotherapy failure. Low Peff, found as a major determinant of ineffective rivaroxaban treatment, encourages further research to find (pato)physiological factors influencing suboptimal absorption.

The occurrence of heavy metals and antimicrobials in sewage sludge and their predicted risk to soil - Is there anything to fear?

The study assessed the occurrence of legally-monitored heavy metals and unmonitored antimicrobials in sludge from small, medium, large and very large municipal wastewater treatment plants (WWTPs), and the predicted environmental risk and risk of resistance selection associated with sludge administration to soil. The temporal variations of the studied compounds in sludge and associated risks to soil were determined by sampling over a year. Although the highest concentrations of heavy metals were noted in sludge from the largest WWTP, i.e. from 1.50 mg/kg (mean 1.61 mg/kg) for Cd to 2188 mg/kg (mean 1332 mg/kg) for Zn, the obtained values only reached a few percent of the legal limits. The same WWTP also demonstrated lower concentrations of antimicrobials compared to the smaller ones. The highest concentrations of antimicrobials, ranging from 24.04 µg/kg for trimethoprim to 900.24 µg/kg for tetracycline, were found in the small and medium WWTPs. However, due to lack of regulations at the national and EU levels, the results cannot be compared with legal limits. Principal Component Analysis (PCA), cluster and heatmap analysis separated samples according to WWTP size. Small WWTP demonstrated correlation with antimicrobials (tetracycline, trimethoprim, clindamycin, ciprofloxacin and ofloxacin), while the large and very large WWTP revealed correlations with heavy metals (Cu and Cr). The obtained environmental risk quotients confirmed that the heavy metals did not present a threat, measured either as individual risk quotients (RQenv), cumulative risk (RQcumulative) or risk of mixture of heavy metals (RQmix-metals). In the case of antimicrobials, only tetracycline demonstrated moderate RQenv, RQcumulative and RQmix-antimicrobials in the small WWTP sludge, with values of 0.1 to 1. Our findings highlight the importance of monitoring sewage sludge before soil application, especially from small WWTPs, to reduce the potential environmental impact of antimicrobials. They also confirm our previous data regarding the environmental risk associated with various toxic compounds, including emerging contaminants, in the sludge from small WWTPs.

Investigation of the Impact of L-Phenylalanine and L-Tyrosine Pre-Treatment on the Uptake of 4-Borono-L-Phenylalanine in Cancerous and Normal Cells Using an Analytical Approach Based on SC-ICP-MS.

Boron has gained significant attention in medical research due to its B-10 isotope's high cross section for the reaction with thermal neutrons, generating ionizing particles that can eliminate cancer cells, propelling the development of boron neutron capture therapy (BNCT) for cancer treatment. The compound 4-borono-L-phenylalanine (BPA) has exhibited potential in BNCT clinical trials. Enhancing BPA uptake in cells involves proposing L-amino acid preloading. This study introduces a novel analytical strategy utilizing ICP-MS and single cell ICP-MS (SC-ICP-MS) to assess the effectiveness of L-tyrosine and L-phenylalanine preloading on human non-small cell lung carcinoma (A549) and normal Chinese hamster lung fibroblast (V79-4) models, an unexplored context. ICP-MS outcomes indicated that L-tyrosine and L-phenylalanine pre-treatment increased BPA uptake in V79-4 cells by 2.04 ± 0.74-fold (p = 0.000066) and 1.46 ± 0.06-fold (p = 0.000016), respectively. Conversely, A549 cells manifested heightened BPA uptake solely with L-tyrosine preloading, with a factor of 1.24 ± 0.47 (p = 0.028). BPA uptake remained higher in A549 compared to V79-4 regardless of preloading. SC-ICP-MS measurements showcased noteworthy boron content heterogeneity within A549 cells, signifying diverse responses to BPA exposure, including a subset with notably high BPA uptake. This study underscores SC-ICP-MS's utility in precise cellular boron quantification, validating cellular BPA uptake's heterogeneity.

How does the order of sample analysis influence the matrix effect during LC-MS bioanalysis?

Mass spectrometry coupled with liquid chromatography is a valuable tool for drug development and personalised drug therapy. The matrix effect is caused by enhancing or suppressing the analyte signal intensity by the interfering compounds of biological fluids. The matrix effect may influence the reliability of the quantitative results. Thus, its evaluation is a critical part of bioanalytical method validation. Identified factors affecting the matrix effect are the physicochemical properties of the analyte, type of biological material, analytical conditions, the ion source construction and calculation method. The order of analysis of test samples (pure solutions and post-extraction spiked samples) is another factor possibly affecting quantifying the matrix effect variability between sources. Our primary goal was to find which experimental design - interleaved or set of blocks - is more sensitive to detect matrix effect variability. Additionally, to better understand the reason of variability, we evaluated the influence of chromatographic elution and the type of plasma (normal, lipemic or hemolyzed), co-elution, and carry-over of phospholipids. We used chemometric methods: Principal Component Analysis and Partial Least-Squares Discriminant Analysis. Although a comparable (but statistically different) matrix effect (%RSDMF) is observed using the interleaved and block schemes, for some compounds, the order of the samples strongly influences the results. The interleaved scheme was generally more sensitive in detecting the matrix effect than the block scheme. Thus, reporting the order of samples is needed to ensure the repeatability of experiments. Chemometrics suggests that lipemic samples analyzed in isocratic conditions are most prone to the matrix effect. Different compositions of matrix lots of the same type - especially lipemic - may influence method reliability. Thus, evaluating more than one source of lipemic and hemolyzed plasma is recommended.

Molecularly Imprinted Polymers Specific towards 4-Borono-L-phenylalanine-Synthesis Optimization, Theoretical Analysis, Morphology Investigation, Cytotoxicity, and Release Studies.

The aim of this study was to create molecularly imprinted polymers (MIPs) that are specific towards 4-borono-L-phenylalanine (BPA) to serve as boron compound carriers. The honeycomb-like MIPs were characterized in the matter of adsorption properties, morphology, structure, and cytotoxicity towards A549 and V79-4 cell lines. The honeycomb-like MIP composed from methacrylic acid and ethylene glycol dimethacrylate was characterized by a binding capacity of 330.4 ± 4.6 ng g-1 and an imprinting factor of 2.04, and its ordered, porous morphology was confirmed with scanning electron microscopy. The theoretical analysis revealed that the coexistence of different anionic forms of the analyte in basic solution might lower the binding capacity of the MIP towards BPA. The release profiles from the model phosphate buffer saline showed that only 0 to 4.81% of BPA was released from the MIP within the time frame of two hours, furthermore, the obtained material was considered non-cytotoxic towards tested cell lines. The results prove that MIPs can be considered as effective BPA delivery systems for biomedical applications and should be investigated in further studies.

Development of a novel method for the simultaneous detection of trimethylamine N-oxide and creatinine in the saliva of patients with chronic kidney disease - Its utility in saliva as an alternative to blood.

Chronic kidney disease (CKD) is associated with increased levels of creatinine and other uremic toxins (UTs), which impaired kidneys cannot filtrate. Typically, CKD is diagnosed by calculating the estimated glomerular filtration rate using serum creatinine or cystatin C levels. In pursuit of more sensitive and reliable biomarkers of kidney dysfunction, scientific attention has turned towards other UTs, such as trimethylamine N-oxide (TMAO), successfully quantified in standard matrices, blood and urine. However, less invasive monitoring of kidney function can be performed using an alternative diagnostic biofluid, saliva, which has been shown to contain clinically relevant concentrations of renal function markers. Accurate quantitative estimation of serum biomarkers using saliva measurements can only be achieved provided that there is a tight saliva-serum correlation for the analyte of interest. Therefore, we aimed to verify the correlation between saliva and serum levels of TMAO in CKD patients using newly developed and validated quantitative liquid chromatography coupled to mass spectrometry (LC-MS) method for simultaneous detection of TMAO, and creatinine - the conventional marker of renal impairment. Secondly, we applied this method to quantify TMAO and creatinine levels in the resting saliva of CKD patients collected with a standardised method involving swab-based collectors. A good linear correlation was obtained between the concentration of creatinine in serum and resting saliva of CKD patients (r = 0.72, p = 0.029) and even better in the case of TMAO (r = 0.81, p = 0.008). The analysed validation criteria were fulfilled. No significant influence of the type of swab in the Salivette® device on creatinine and TMAO concentrations in saliva was detected. Our study indicates that saliva can be successfully used in the non-invasive monitoring of renal failure in CKD by measuring salivary TMAO concentrations.

Towards point-of-care manufacturing and analysis of immediate-release 3D printed hydrocortisone tablets for the treatment of congenital adrenal hyperplasia.

Hydrocortisone (HC) is the preferred drug in children with congenital adrenal hyperplasia due to its lower potency as well as fewer reports of side effects. Fused deposition modelling (FDM) 3D printing holds the potential to produce low-cost personalised doses for children at the point of care. However, the compatibility of the thermal process to produce immediate-release bespoke tablets for this thermally labile active is yet to be established. This work aims to develop immediate-release HC tablets using FDM 3D printing and assess drug contents as a critical quality attribute (CQA) using a compact, low-cost near-infrared (NIR) spectroscopy as a process analytical technology (PAT). The FDM 3D printing temperature (140 °C) and drug concentration in the filament (10%-15% w/w) were critical parameters to meet the compendial criteria for drug contents and impurities. Using a compact low-cost NIR spectral device over a wavelength of 900-1700 nm, the drug contents of 3D printed tablets were assessed. Partial least squares (PLS) regression was used to develop individual calibration models to detect HC content in 3D printed tablets of lower drug contents, small caplet design, and relatively complex formula. The models demonstrated the ability to predict HC concentrations over a wide concentration range (0-15% w/w), which was confirmed by HPLC as a reference method. Ultimately, the capability of the NIR model had preceding dose verification performance on HC tablets, with linearity (R2 = 0.981) and accuracy (RMSECV = 0.46%). In the future, the integration of 3DP technology with non-destructive PAT techniques will accelerate the adoption of on-demand, individualised dosing in a clinical setting.

The use of near-infrared as process analytical technology (PAT) during 3D printing tablets at the point-of-care.

Fused deposition modelling (FDM) is one of the most researched 3D printing technologies that holds great potential for low-cost manufacturing of personalised medicine. To achieve real-time release, timely quality control is a major challenge for applying 3D printing technologies as a point-of-care (PoC) manufacturing approach. This work proposes the use of a low-cost and compact near-infrared (NIR) spectroscopy modality as a process analytical technology (PAT) to monitor a critical quality attribute (drug content) during and after FDM 3D printing process. 3D printed caffeine tablets were used to manifest the feasibility of the NIR model as a quantitative analytical procedure and dose verification method. Caffeine tablets (0-40 % w/w) were fabricated using polyvinyl alcohol and FDM 3D printing. The predictive performance of the NIR model was demonstrated in linearity (correlation coefficient, R2) and accuracy (root mean square error of prediction, RMSEP). The actual drug content values were determined using the reference high-performance liquid chromatography (HPLC) method. The model of full-completion caffeine tablets demonstrated linearity (R2 = 0.985) and accuracy (RMSEP = 1.4 %), indicated to be an alternative dose quantitation method for 3D printed products. The ability of the models to assess caffeine contents during the 3D printing process could not be accurately achieved using the model built with complete tablets. Instead, by building a predictive model for each completion stage of 20 %, 40 %, 60 % and 80 %, the model of different completion caffeine tablets displayed linearity (R2 of 0.991, 0.99, 0.987, and 0.983) and accuracy (RMSEP of 2.22 %, 1.65 %, 1.41 %, 0.83 %), respectively. Overall, this study demonstrated the feasibility of a low-cost NIR model as a non-destructive, compact, and rapid analysis dose verification method enabling the real-time release to facilitate 3D printing medicine production in the clinic.

The Gut Microbial Metabolite Trimethylamine N-Oxide is Linked to Specific Complications of Systemic Sclerosis.

Background: Systemic sclerosis (SSc) is a rare immune-mediated connective tissue disease characterized by fibrosis of the skin and internal organs, whose pathogenesis is not fully understood. Recent studies have revealed dysbiosis in patients with systemic sclerosis and have indicated the possible role of the microbiota and its metabolites in the pathogenesis of the disease. Trimethylamine N-oxide (TMAO) is a compound produced by dysbiotic microbiota observed at higher concentrations in several autoimmune diseases. Objective: To determine concentrations of the bacteria-derived metabolite TMAO in patients with systemic sclerosis and to assess possible correlation between TMAO and a specific manifestation of the disease. Patients and Methods: The study included 63 patients with SSc and 47 matched control subjects. The concentration of TMAO was measured with high-performance liquid chromatography. Results: Plasma TMAO level was significantly increased in patients with SSc (283.0 [188.5-367.5] ng/mL versus 205.5 [101.0-318.0] ng/mL; p < 0.01). An increased concentration of TMAO was observed in patients with concomitant interstitial lung disease (ILD) (302.0 ng/mL [212.0-385.5] ng/mL versus 204.0 [135.5-292.0] ng/mL; p < 0.01) and esophageal dysmotility (289.75 [213.75-387.5] ng/mL versus 209.5 ng/mL [141.5-315.0] ng/mL; p < 0.05) compared to patients without these complications. Furthermore, TMAO concentration exhibited significant correlation with markers of heart involvement (left ventricle ejection fraction, NT-proBNP), marker of ILD severity and Scleroderma Clinical Trials Consortium Damage Index. Conclusion: The concentration of TMAO, gut microbiota-associated metabolite, is increased in systemic sclerosis, particularly in patients with advanced organ involvement. This is the first study evaluating plasma TMAO in systemic sclerosis. Bacterial metabolites may be a link between dysbiosis and organ involvement in the course of the disease. Modulation of gut bacterial-derived metabolites may represent a new therapeutic approach in the management of systemic sclerosis.

Effect of different amino acid solutions on the oxidative stability of three different lipid emulsions in all-in-one admixtures.

BACKGROUND AND AIM: Lipid peroxidation in parenteral nutrition mixtures is still a challenge. We aimed to evaluate the effect of two different amino acid solutions used in different clinical situations on lipid peroxidation of three different lipid emulsions (Intralipid, ClinOleic, and SMOFlipid) in all-in-one admixtures during 24 h of simulated infusion. The selected amino acid solutions included one used in stable patients and one used in renal insufficiency (Aminomel10E and Nephrotect, respectively). METHODS: Eighteen all-in-one admixtures were prepared. The simulated infusion with light protection was conducted straight after the preparation for 24 h at room temperature. The lipid peroxidation process was evaluated in all-in-one admixtures and the original lipid emulsion by determining the malondialdehyde levels (high-performance liquid chromatography) and conjugated dienes and trienes (ultraviolet-visible spectrophotometry). RESULTS: Malondialdehyde in the original packaging was lower in SMOFlipid (9 µM) compared with Intralipid (27 µM, P = 0.0003) and ClinOleic (25 µM, P = 0.0001). During simulated infusion, ClinOleic showed a significantly lower rate of lipid peroxidation (26% decrease in aldehyde levels) in comparison with Intralipid and SMOFlipid (up to 39% and 31% increase in aldehyde levels, respectively) when the admixture was based on Aminomel10E. In admixtures based on Nephrotect, ClinOleic, and SMOFlipid showed better oxidative stability in comparison with Intralipid. Admixtures based on Nephrotect and Intralipid had higher levels of primary lipid peroxidation products than those based on ClinOleic (P = 0.030) or SMOFlipid (P = 0.071, not significant). CONCLUSIONS: Amino acid solutions influence the rate of lipid peroxidation. The observation should be confirmed in larger studies with different amino acid solutions.

Determination of modified nucleosides in the urine of children with autism spectrum disorder.

Metabolic disorders and nutritional deficiencies in ASD children may be identified by the determination of urinary-modified compounds. In this study, levels of selected seven modified compounds: O-methylguanosine, 7-methylguanosine, 1-methyladenosine, 1-methylguanine, 7-methylguanine, 3-methyladenine, and 8-hydroxy-2`-deoxyguanosine in the group of 143 ASD children and 68 neurotypical controls were analyzed. An ancillary aim was to verify if the reported levels differed depending on the pathogenetic scoring of ASD (mild deficit, moderate deficit, severe deficit). Elevated O-methylguanosine and 7-methylguanosine levels and significantly lower levels of 3-methyladenine, 1-methylguanine, 1-methyladenosine, 7-methylguanine, and 8-hydroxy-'2'-deoxyguanosine were observed in ASD children compared to controls. O-methylguanosine levels were elevated in the mild and moderate groups, while the levels of 1-methylguanine, 1-methyladenosine, 7-methylguanine, and 8-hydroxy-'2'-deoxyguanosine in the same groups were lower than in neurotypical controls. The reported evidence shows that modified nucleosides/bases can play a potential role in the pathophysiology of ASD and that each nucleoside/base shows a unique pattern depending on the degree of the deficit.

Relationship between Excreted Uremic Toxins and Degree of Disorder of Children with ASD.

Autism spectrum disorder (ASD) is a complex developmental disorder in which communication and behavior are affected. A number of studies have investigated potential biomarkers, including uremic toxins. The aim of our study was to determine uremic toxins in the urine of children with ASD (143) and compare the results with healthy children (48). Uremic toxins were determined with a validated high-performance liquid chromatography coupled to mass spectrometry (LC-MS/MS) method. We observed higher levels of p-cresyl sulphate (pCS) and indoxyl sulphate (IS) in the ASD group compared to the controls. Moreover, the toxin levels of trimethylamine N-oxide (TMAO), symmetric dimethylarginine (SDMA), and asymmetric dimethylarginine (ADMA) were lower in ASD patients. Similarly, for pCS and IS in children classified, according to the intensity of their symptoms, into mild, moderate, and severe, elevated levels of these compounds were observed. For mild severity of the disorder, elevated levels of TMAO and comparable levels of SDMA and ADMA for ASD children as compared to the controls were observed in the urine. For moderate severity of ASD, significantly elevated levels of TMAO but reduced levels of SDMA and ADMA were observed in the urine of ASD children as compared to the controls. When the results obtained for severe ASD severity were considered, reduced levels of TMAO and comparable levels of SDMA and ADMA were observed in ASD children.

Dietary Supplements with Proline-A Comprehensive Assessment of Their Quality.

Dietary supplements are food products commonly used worldwide to obtain nutritional and physiological effects. They can contain a wide variety of active substances and can be administered for health and disease. Their use can be beneficial if justified, and their quality is adequate. Unfortunately, data on the quality of supplements is scarce. As part of this work, we assess the quality of seven dietary supplements containing proline. The preparations were produced in the EU and the USA. The quality assessment consisted of the detection of potential impurities, the determination of the content of the main ingredient, and the release of proline. The technique used to analyse impurities and proline (Pro) content was liquid chromatography coupled with tandem mass spectrometry. We detected five contaminants. The main ingredient content was in the range of 73-121% in capsules and 103-156% in tablets. Five of the seven analysed dietary supplements released below 80% Pro (for each tablet/capsule at pH 1.2). One of the supplements may be inactive because a very low release of Pro was reported. The results, we hope, will increase consumer awareness of the quality of these preparations and result in a change in the regulations governing the marketing of these preparations, at least by making release testing mandatory.

Effect of Polyphenols and Zinc Co-Supplementation on the Development of Neoplasms in Rats with Breast Cancer.

The aim of the study was to evaluate the effect of selected polyphenolic compounds: epicatechin, apigenin, and naringenin, administered separately or in combination with zinc (Zn), on the growth and development of the neoplastic process induced by 7,12-dimethylbenz[a]anthracene (DMBA) in rats. The impact of supplementation with the above-mentioned compounds on the content of modified derivatives: 1-methyladenosine, N6-methyl-2'-deoxyadenosine, O-methylguanosine, 7-methylguanine, 3-methyladenine, 1-methylguanine, 2-amino-6,8-dihydroxypurine, and 8-hydroxy-2'-deoxyguanosine in the urine of rats with mammary cancer was also assessed. Female Sprague-Dawley rats divided into 7 groups were used in the study: animals without supplementation and animals supplemented with apigenin, epicatechin, and naringenin separately or in combination with zinc. To induce mammary cancer, rats were treated with DMBA. Modified derivatives were determined by a validated high-performance liquid chromatography coupled to mass spectrometry method. Based on the obtained results, it can be said that supplementation of the animals with naringenin inhibits the development and progression of the neoplastic process in rats treated with 7,12-dimethylbenzanthracene. Neoplastic tumors were found in only 2 of 8 rats (incidence: 25%) and were considered to be at most grade 1 malignancy. The first palpable tumors in the group of animals receiving naringenin appeared two-three weeks later when compared to other groups. The combination of zinc with flavonoids (apigenin, epicatechin, and naringenin) seems to stimulate the process of carcinogenesis. The level of N6-methyl-2'-deoxyadenosine and 3-methyladenine in the urine of rats was statistically significantly higher in the groups supplemented with apigenin, epicatechin, and naringenin administered in combination with Zn than in the groups receiving only polyphenolic compounds. In conclusion, supplementation of rats with selected flavonoids administered separately or in combination with Zn has an impact on the development of neoplasms and the level of modified nucleosides in the urine of rats with breast cancer. Our results raise the question of whether simultaneous diet supplementation with more than one anti-cancer agent may reduce/stimulate the risk of carcinogenesis.