Flexible Magnetoelectric Fiber for Self-Powered Human-Machine Interactive.

Flexible large strain sensors are an ideal choice for monitoring human motion, but the current use of flexible strain gauges is hindered by the need for external power sources and long-term operation requirements. Fiber-based sensors, due to their high flexibility, excellent breathability, and the ease with which they can be embedded into everyday clothing, have the potential to become a novel type of wearable electronic device. This paper proposes a flexible self-powered strain sensing material based on the electromagnetic induction effect, composed of a uniform mixture of Ecoflex and Nd2Fe14B, which has good skin-friendliness and high stretchability of over 100%. The voltage output of the magnetoelectric composite fiber remains stable over 5000 stretch-release cycles, reaching up to 969 µV. Based on this novel sensing material, a remote smart car control scheme for a human-machine interaction system was designed, enabling real-time gesture interaction.

An integrated textile of electrical signal sensing with visual indicators and energy supply for perspiration management.

Recent advances in wearable electronics have enabled the development of sweat sensors providing valuable information for healthcare monitoring. However, the limitations of sweat sensors are excessive dependence on external detection systems, the impossible to real-time visual signal transmission, and inadequate perspiration management. Herein, a single- and double-layer interwoven fabric (SDIF) is designed to achieve indicators of color visualization with an output of electrical signal and energy supply. After absorption of electrolyte, the SDIF can be rapidly activated, connected with the concentration, infiltrated volume, and environmental parameters, and the variational color of SDIF can provide visual indicators. The one tissue cycle of SDIF with three-weft intervals maintains a stable output voltage of ≈1.0 V, conducted by twisting, folding, dynamic bending, and reusing. Moreover, serial tissue cycles can be woven into large fabrics by connecting in series and parallel configurations for energy supply. The developed SDIF with an interweaving structural design using industrial-producible weaving technology provides the functionality of sweat adsorption and transportation, monitoring by recognition of color, and electrical signals to improve perspiration management.

Scalable Asymmetric Fabric Evaporator for Solar Desalination and Thermoelectricity Generation.

The integration of solar interfacial evaporation and power generation offers a sustainable solution to address water and electricity scarcity. Although water-power cogeneration schemes are proposed, the existing schemes lack scalability, flexibility, convenience, and stability. These limitations severely limit their future industrial applications. In this study, we prepared a hybrid fabric composed of basalt fibers and cotton yarns with asymmetric structure using textile weaving technology. The cotton yarn in lower layer of fabric facilitates water transport, while the basalt fibers in upper layer enable thermal localization and water supply balancing. The carbon black is deposited on top layer by flame burning to facilitate photothermal conversion. The fabric exhibits a high evaporation rate of 1.52 kg m-2 h-1, which is 3.6 times that of pure water, and an efficiency of 88.06% under 1 kW m-2 light intensity. After assembly with a thermoelectric module, the hybrid system achieves a maximum output power density of 66.73 mW m-2. By exploiting the scalability of fabric, large-scale desalination and power production can be achieved in outdoor environments. This study demonstrates the seamless integration of fabric-based solar evaporation and waste heat-to-energy technologies, thereby providing new avenues for the development of scalable and stable water-power cogeneration systems.

Construction of a BiOI/ZnO heterojunction on biomass Juncus effusus fiber for photodegradation of organic pollutants.

Semiconductor heterojunction engineering and three-dimensional (3D) architecture construction have been considered highly desirable strategies to enhance photocatalytic performance. Herein, a BiOI/ZnO composite photocatalyst with a 3D flower-like architecture was successfully prepared, which was stably immobilized on three-dimensional porous lignocellulosic biomass Juncus effusus (JE) fiber. The outstanding photocatalytic performance of the BiOI/ZnO-JE fiber was confirmed by the degradation of tetracycline hydrochloride (TC, 90%), ciprofloxacin (CIP, 79%), and norfloxacin (NOR, 81%). The enhanced photocatalytic activities were mainly attributed to the synergistic absorption performance of the lignocellulosic JE and the effective transfer and separation of charges. Moreover, the hydroxyl (·OH) and superoxide radicals (·O2-) are the main reactive species in the photocatalytic process according to the analysis. This work may provide a novel perspective for constructing high-performance lignocellulosic-based photocatalytic materials.

Chemical Profile and Aroma Effects of Major Volatile Compounds in New Mulberry Leaf Fu Brick Tea and Traditional Fu Brick Tea.

This study aimed to investigate the aroma effects of key volatile compounds in a new type of mulberry leaf Fu brick teas (MTs) and traditional Fu brick teas (FTs). Headspace solid-phase microextraction (HS-SPME), gas chromatography-mass spectrometry (GC-MS), sensory evaluation, and chemometrics were used to determine the differences in key flavour qualities between the two. The results showed that a total of 139 volatile components were identified, with aldehydes, ketones, and alcohols dominating. Orthogonal Partial Least Squares Discriminant Analysis (OPLS-DA) combined with the odour activity value (OAV) showed that seven aroma compounds had an OAV > 10, including 2-(4-methylcyclohex-3-en-1-yl) propan-2-ol with floral and fruity aroma and green attributes, 6-methylhept-5-en-2-one, (E)-6,10-dimethyl-5,9-Undecadien-2-one, (3E,5E)-octa-3,5-dien-2-one, Benzaldehyde, and (E)-3,7,11,15-tetramethylhexadec-2-en-1-ol, which were more abundant in MTs than FTs; Cedrol with sweet aroma attributes was more consistent in MTs than FTs, and we suggest that these odour compounds are important aroma contributors to MTs. Taken together, these findings will provide new insights into the mechanism of formation of the characteristic attributes of aroma in MTs.

Color construction of multi-colored carbon fibers using glucose.

Carbon fibers (CFs) have attracted attention in the automotive, aviation, and aerospace industries. However, the coloration of CFs is challenging due to their brittleness, inertness, complexity, and time/energy-intensive processes. Herein, inspired by the naturally grown protrusive nanostructures on the green central surface of peacock back feathers, we report an in-situ self-growing strategy for developing carbon spheres (CSs) on the CFs surface to achieve color tuning. This is achieved via the dynamic growth of CSs using glucose as the feeding material. Combined with the coloration process, the interaction between CSs and CFs promotes stable interfacial forces in integrated molding. This strategy allows the coloring system to continuously vary its color in a designated manner, thereby, endowing it with satisfactory mechanical robustness, acid durability, and light fastness. We anticipate this developed approach can be potentially competitive in the color construction of CFs with multi-colors due to its low-cost manufacturing.

Metal-Organic Frameworks Meet Metallic Oxide on Carbon Fiber: Synergistic Effect for Enhanced Photodegradation of Antibiotic Pollutant.

Photodegradation shows a potential strategy for alleviating the excessive antibiotics crisis. The synergistic effect of various metal compounds immobilized on conductive substrates has been considered for wastewater treatment. However, developing a facile and universal approach for rational design and enhancing photocatalytic properties has endured extreme challenges. Herein, we develop a strategy to facilitate the photocatalytic reactions by designing a composite architecture of ZIF-8 ligand binding to the in-situ synthesis ZnO seed layer on carbon fiber. In this architecture, the dissolution and release of the seed layer in the excessive 2-Methylimidazole methanol solution were used as the binder to enhance the interplay between organic ligand and substrate. As an evaluated system for antibiotic contaminants, the photodegradation of tetracycline hydrochloride was performed with a removal efficiency of 88.47% (TC = 50 mg/L, pH = 4, 0.08 g of photocatalyst, illumination within 100 min). Moreover, the photocatalyst exhibited a steady photocatalytic activity (75.0%) after five cycles. The present work demonstrated a strategy for enhancing the photocatalytic performances of carbon fiber and accordingly provided useful perception into the design of the synergistic structure.

A Flexible and Weavable Lignocellulose-Based Photocatalyst Supported by Natural Three-Dimensional Porous Juncus effusus for Highly Efficient Degradation of Environmental Contaminants.

Lignocellulosic biomass is a potential biotemplate for disposing the burden of the uncontrollable accumulation of environmental contaminants disrupting the hydrophytic ecosystems. Herein, an efficient solar-driven catalyst was prepared using a natural three-dimensional (3D) porous lignocellulose-based Juncus effusus (JE) fiber for wastewater treatment. Owing to the exquisite 3D microstructure and abundant hydroxyl groups, the two-dimensional lamellar graphitic carbon nitride/graphene oxide (g-C3N4/GO) nanocomposites were successfully synthesized and decorated on the carboxymethylated JE fiber via the electrostatic self-assembly method. The as-prepared g-C3N4/GO-JE (CNG-JE) photocatalyst exhibits excellent light absorption efficiency and a superior ability to accelerate photogenerated electron migration. The outstanding adsorption performance toward pollutants also contributes to the photodegradation property of CNG-JE, showing highly efficient degradation of C.I. Reactive Red 120 (99.8%), C.I. Acid Yellow 11 (99.8%), methylene blue (99.4%), Cr(VI) (98.8%), and tetracycline (87.2%). Most importantly, the lignocellulose-based CNG-JE fibers could be fabricated into a photocatalyst textile due to their flexible and weavable properties. In actual application, the CNG-JE textile can be reused for at least five cycles under the sun, demonstrating that the flexible CNG-JE textile is practical and recyclable. This study may provide a platform for constructing efficient, flexible, and weavable biomass-based porous materials for cost-effective and sustainable catalytic applications.