Pumpkin Leaf Extract Crop Waste as a New Degradable and Environmentally Friendly Corrosion Inhibitor.

The pumpkin leaf was extracted by the decoction method, and it was used as an eco-friendly, nontoxic inhibitor of copper in 0.5 M H2SO4 corrosion media. To evaluate the composition and protective capacity of the pumpkin leaf extract, Fourier infrared spectroscopy, electrochemical testing, XPS, AFM, and SEM were employed. The results showed that the pumpkin leaf extract (PLE) is an effective cathode corrosion inhibitor, exhibiting exceptional protection for copper within a specific temperature range. The corrosion inhibition efficiency of the PLE against copper reached 89.98% when the concentration of the PLE reached 800 mg/L. Furthermore, when the temperature and soaking time increased, the corrosion protection efficiency of 800 mg/L PLE on copper consistently remained above 85%. Analysis of the morphology also indicated that the PLE possesses equally effective protection for copper at different temperatures. Furthermore, XPS analysis reveals that the PLE molecules are indeed adsorbed to form an adsorption film, which is consistent with Langmuir monolayer adsorption. Molecular dynamics simulations and quantum chemical calculations were conducted on the main components of the PLE.

Investigation the Corrosion Inhibition Effect of Itraconazole on Copper in H2SO4 at Different Temperatures: Combining Experimental and Theoretical Studies.

The anti-corrosion inhibition effect of itraconazole on copper (Cu) in 0.5 M H2SO4 is observed with variety of experimental methods, including electrochemical measurement, surface morphology analysis, and theoretical calculations. These experimental results all confirm that itraconazole exhibits excellent anti-corrosion performance in the certain temperatures range (298 K⁻313 K) for copper in sulfuric acid solution. In addition, corresponding adsorption isothermal models were used to fit the adsorption behavior of itraconazole on the copper surface. The results show that the Langmuir adsorption model agrees best with the experimental results. The adsorption of itraconazole on the copper surface belongs to chemical and physical adsorption.

Flexural Progressive Failure of Carbon/Glass Interlayer and Intralayer Hybrid Composites.

The flexural progressive failure modes of carbon fiber and glass fiber (C/G) interlayer and intralayer hybrid composites were investigated in this work. Results showed that the bending failure modes for interlayer hybrid composites are determined by the layup structure. Besides, the bending failure is characterized by the compression failure of the upper layer, when carbon fiber tends to distribute in the upper layer, the interlayer hybrid composite fails early, the failure force is characterized by a multi-stage slightly fluctuating decline and the fracture area exhibits a diamond shape. While carbon fiber distributes in the middle or bottom layer, the failure time starts late, and the failure process exhibits one stage sharp force/stress drop, the fracture zone of glass fiber above the carbon layers presents an inverted trapezoid shape, while the fracture of glass fiber below the carbon layers exhibits an inverted triangular shape. With regards to the intralayer hybrid composites, the C/G hybrid ratio plays a dominating role in the bending failure which could be considered as the mixed failures of four structures. The bending failure of intralayer hybrid composites occurs in advance since carbon fiber are located in each layer; the failure process shows a multi-stage fluctuating decline, and the decline slows down as carbon fiber content increases, and the fracture sound release has the characteristics of a low intensity and high frequency for a long time. By contrast, as glass fiber content increases, the bending failure of intralayer composites is featured with a multi-stage cliff decline with a high amplitude and low frequency for a short-time fracture sound release.

A combination of experiment and theoretical methods to study the novel and low-cost corrosion inhibitor 1-hydroxy-7-azabenzotriazole for mild steel in 1 M sulfuric acid.

1-Hydroxy-7-azabenzotriazole (HOAT) was explored via experimental and theoretical computation methods as a corrosion inhibitor for mild steel in 1 M sulfuric acid. These data indicate that HOAT has good ability to suppress corrosion of the mild steel, with ideal agreement with between experimental and computational results. Besides, the electrochemical experiments show that HOAT is a mixed-type corrosion inhibitor for mild steel in 1 M H2SO4. Furthermore, HOAT adsorption on the surface of steel conforms to the Langmuir isotherm model. Finally, computational simulation was executed to deeply investigate the mechanism to HOAT inhibition corrosion of steel.

Acetylcholinesterase biosensor for carbaryl detection based on interdigitated array microelectrodes.

In this study, an acetylcholinesterase (AChE) biosensor with superior accuracy and sensitivity was successfully developed based on interdigitated array microelectrodes (IAMs). IAMs have a series of parallel microband electrodes with alternating microbands connected together. Chitosan was used as the enzyme immobilization material, and AChE was used as the model enzyme for carbaryl detection to fabricate AChE biosensor. Electrochemical impedance spectroscopy was used in conjunction with the fabricated biosensor to detect pesticide residues. Based on the inhibition of pesticides on the AChE activity, using carbaryl as model compounds, the biosensor exhibited a wide range, low detection limit, and high stability. Moreover, the biosensor can also be used as a new promising tool for pesticide residue analysis.

Acetylcholinesterase biosensor based on chitosan/prussian blue/multiwall carbon nanotubes/hollow gold nanospheres nanocomposite film by one-step electrodeposition.

In this paper, chitosan-prussian blue-multiwall carbon nanotubes-hollow gold nanospheres (Chit-PB-MWNTs-HGNs) film was fabricated onto the gold electrode surface by one-step electrodeposition method; and then acetylcholinesterase (AChE) and Nafion were modified onto the film to prepare an AChE biosensor. Incorporating MWNTs and HGNs into Chit-PB hybrid film promoted electron transfer reaction, enhanced the electrochemical response and improved the microarchitecture of the electrode surface. The morphologies and electrochemistry properties of the composite were investigated by using scanning electron microscopy, transmission electron microscopy, cyclic voltammetry and electrochemical impedance spectroscopy, respectively. Parameters affecting the biosensor response such as pH, enzyme loading and inhibition time were optimized. Based on the inhibition of pesticides on the AChE activity, using malathion, chlorpyrifos, monocrotophos and carbofuran as model compounds, this biosensor showed a wide range, low detection limit, good reproducibility and high stability. Moreover, AChE/Chit-PB-MWNTs-HGNs/Au biosensor can also be used for direct analysis of practical samples, which would be a new promising tool for pesticide analysis.

An amperometric immunosensor based on multi-walled carbon nanotubes-thionine-chitosan nanocomposite film for chlorpyrifos detection.

In this work, a novel amperometric immunosensor based on multi-walled carbon nanotubes-thionine-chitosan (MWCNTs-THI-CHIT) nanocomposite film as electrode modified material was developed for the detection of chlorpyrifos residues. The nanocomposite film was dropped onto a glassy carbon electrode (GCE), and then the anti-chlorpyrifos monoclonal antibody was covalently immobilized onto the surface of MWCNTs-THI-CHIT/GCE using the crosslinking agent glutaraldehyde (GA). The modification procedure was characterized by using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Under the optimized conditions, a linear relationship between the relative change in peak current of different pulse voltammetry (DPV) and the logarithm of chlorpyrifos solution concentration was obtained in the range from 0.1 to 1.0 × 10(5) ng/mL with a detection limit of 0.046 ng/mL. The proposed chlorpyrifos immunosensor exhibited high reproducibility, stability, and good selectivity and regeneration, making it a potential alternative tool for ultrasensitive detection of chlorpyrifos residues in vegetables and fruits.