The difference analysis of physicochemical indexes and volatile flavor compounds of chili oil prepared from different varieties of chili pepper.

Because of its peculiar flavor, chili oil is widely used in all kinds of food and is welcomed by people. Chili pepper is an important raw material affecting its quality, and commercial chili oil needs to meet various production needs, so it needs to be made with different chili peppers. However, the current compounding method mainly relies on the experience of professionals and lacks the basis of objective numerical analysis. In this study, the chroma and capsaicinoids of different chili oils were analyzed, and then the volatile components were determined by gas chromatography-mass spectrometry (GC-MS) and gas chromatography-ion migration spectrometer (GC-IMS) and electronic nose (E-nose). The results showed that Zidantou chili oil had the highest L*, b*, and color intensity (ΔE) (52.76 ± 0.52, 88.72 ± 0.89, and 118.84 ± 1.14), but the color was tended to be greenyellow. Xinyidai chili oil had the highest a* (65.04 ± 0.2). But its b* and L* were relatively low (76.17 ± 0.29 and 45.41 ± 0.16), and the oil was dark red. For capsaicinoids, Xiaomila chili oil had the highest content of capsaicinoids was 2.68 ± 0.07 g/kg, Tianjiao chili oil had the lowest content of capsaicinoids was 0.0044 ± 0.0044 g/kg. Besides, 96 and 54 volatile flavor substances were identified by GC-MS and GC-IMS respectively. And the main volatile flavor substances of chili oil were aldehydes, alcohols, ketones, and esters. A total of 11 key flavor compounds were screened by the relative odor activity value (ROAV). Moguijiao chili oil and Zidantou chili oil had a prominent grass aroma because of hexanal, while Shizhuhong chili oil, Denglongjiao chili oil, Erjingtiao chili oil, and Zhoujiao chili oil had a prominent floral aroma because of 2, 3-butanediol. Chili oils could be well divided into 3 groups by the partial least squares discriminant analysis (PLS-DA). According to the above results, the 10 kinds of chili oil had their own characteristics in color, capsaicinoids and flavor. Based on quantitative physicochemical indicators and flavor substances, the theoretical basis for the compounding of chili oil could be provided to meet the production demand more scientifically and accurately.

A highly-sensitive electrochemical sensor based on Ni nanoparticles modified carbon nanotubes/sulfonated reduced graphene oxide for the detection of capsaicinoids in leisure sauced meat products.

Unclear labeling of spiciness degrees on leisure sauced meat products is prone to resulting in customer complaints and commercial disputes. The content of capsaicinoids is the basis for evaluating the spiciness of food. In this work, an electrochemical sensor based on nickel nanoparticles modified carbon nanotubes (Ni-CNTs) and sulfonated reduced graphene oxide (S-rGO) was developed for the rapid detection of capsaicinoids content in leisure sauced meat products. The linear ranges of capsaicins are 0.01-100 µmol/L with ultra-low detection limits of 1 nmol/L. The outstanding performances are primarily due to the synergistic effect between Ni-CNTs and S-rGO. This effect not only created a three-dimensional stacked structure that improved the electrochemically active surface area, but also generated an internal electric field that improved the charge transfer rate. This work provides a basis for standardized evaluation of spiciness.

Inhibition mechanism of fusarium graminearum growth by g-C3N4 homojunction and its application in barley malting.

The increase of deoxynivalenol (DON) caused by Fusarium graminearum (F. graminearum) during the malting process is a serious safety problem. In our work, the inhibition mechanism of F. graminearum growth by g-C3N4 homojunction and its application in barley malting were studied. The reason why the growth activity of F. graminearum decreased after photocatalysis by g-C3N4 homojunction was that under visible light irradiation, a large amount of •O2- elicited by g-C3N4 homojunction destroyed the cell structure of F. graminearum, leading to the deficiency of cell membrane selective permeability and serious disorder of intracellular metabolism. The application of photocatalysis technology in malting can effectively inhibit the growth of F. graminearum and the accumulation of ergosterol was reduced by 30.55 %, thus reducing the DON content in finished malt by 31.82 %. Meanwhile, the physicochemical indexes of barley malt after photocatalytic treatment still met the requirements of second class barley malt in Chinese light industry standard QB/T 1686-2008. Our work provides a new idea for the control of fungal contamination in barley malt.

A highly sensitive electrochemical sensor for detecting the content of capsaicinoids based on the synergistic catalysis of rGO/PEI-CNTs/ß-CD.

Rapid quantification of the content of capsaicinoids helps in classifying the degree of spiciness, standardized production, and quality control of leisure meat products. To rapidly quantify the content of capsaicinoids in soy sauce and pot-roast meat products, we developed an electrochemical sensor based on reduced graphene oxide (rGO)/polyethylene imine (PEI) - carbon nanotubes (CNTs)/ß-cyclodextrin (ß-CD) to detect the content of capsaicinoids in leisure meat products. Our findings showed that the electrochemical sensor presented highly sensitive performance toward capsaicinoids with a relatively wide linear range (0.01-100 µmol/L), a lower limit of detection (0.01 µmol/L), and an acceptable recovery rate (94.80-112.20%). The sensor performed well and was effective mainly because of the three-dimensional stacking structure and synergistic catalysis of rGO with cCNTs and also due to the improved dispersion of the composite material by ß-CD. The sensor detected trace contents of capsaicinoids in leisure meat products, and thus, it might be considered for practical applications.

Walnut Protein Isolate-κ-Carrageenan Composite Gels Improved with Synergetic Ultrasound-Transglutaminase: Gelation Properties and Structure.

Walnut protein is a kind of natural, high-quality plant protein resource. However, its high content of gluten, strong hydrophobicity and poor gelation ability have greatly limited its development and utilization in gel products. It was found in this experiment that ultrasonic power combined with transglutaminase (TGase) had a significant effect on the gel properties of the walnut protein isolate (WNPI)-κ-carrageenan (KC) complex. The results showed that the gel strength of the WNPI-KC complex first increased and then decreased with the increase in ultrasonic power (0-400 W). WNPI-KC composite gel had the best texture properties, rheological properties, water-holding capacity (99.41 ± 0.76%), swelling ratio (2.31 ± 0.29%) and thermal stability (83.22 °C) following 200 W ultrasonic pretreatment. At this time, the gel network was more uniform and much denser, and the water molecules were more tightly bound. Further, 200 W ultrasonic pretreatment could promote the transformation of α-helices to ß-folds in protein molecules, improve the fluorescence intensity, increase the content of free sulfhydryl groups and enhance the intermolecular forces. The experimental results could provide technical support for the development of walnut protein gel food.

Evaluation of the digestibility and antioxidant activity of protein and lipid after mixing nuts based on in vitro and in vivo models.

This study aimed to evaluate the change of digestibility and antioxidant activity of protein and lipid after mixing walnuts, cashews, and pistachios using in vitro and in vivo models. The results showed that mixed nuts significantly reduced the digested particle size and the degree of hydrolysis of protein and triacylglycerol compared to single nuts in vitro. As a consequence of co-digestion, bioaccessibility and antioxidant activity for amino acids and fatty acids were increased by 1.12-1.87 fold and 1.62-3.81 fold, respectively. In vivo studies, the mixed nuts diet increased the concentration of amino acids and fatty acids in the small intestine by 27.69%-158.26% and 18.13%-152.09%, respectively, and enhanced levels of antioxidant enzymes in the liver and serum, all without causing weight gain. These findings highlight the positive interaction between single and mixed nuts, where mixed nuts enhanced the digestibility and antioxidant activity of single nuts both in vitro and in vivo.

A highly-sensitive sensor based on carbon nanohorns@reduced graphene oxide coated by gold platinum core-shell nanoparticles for electrochemical detection of carbendazim in fruit and vegetable juice.

Carbendazim (CBZ) is beneficial to fruit and vegetable cultivation, but its residue will cause fruit and vegetable juice pollution. In this work, an electrochemical sensor based on carbon nanohorns@reduced graphene oxide coated by gold platinum core-shell nanoparticles (Au@Pt/CNHs@RGO/GCE) was prepared for CBZ detection. The results showed that the assembly of CNHs and RGO assisted by ultrasound improved the electron transfer ability and electrochemical active surface area of CNHs@RGO. Moreover, the coating of Au@Pt nanoparticles further enhanced the sensitivity of the sensor. With the synergistic effect of the three materials, the sensor had a wider linear range (0.05 µmol/L-50 µmol/L), a lower limit of detection (1.64 nmol/L), and satisfactory recovery rates (90.60 % ∼ 97.60 %, carrot juice; 94.00-114.43 %, orange juice). Additionally, the sensor presented good anti-interference and repeatability. This work provides a simple, rapid, economical, sensitive, and accurate sensor for CBZ quantification in fruit and vegetable juice.

Inhibition of Fusarium graminearum growth and deoxynivalenol accumulation in barley malt by protonated g-C3N4/oxygen-doped g-C3N4 homojunction.

Barley malt, the main raw material for beer production, is at risk of Fusarium graminearum (F. graminearum) infection, leading to the possible production of large amounts of deoxynivalenol (DON) in malt. DON in malt can migrate into the final beer product, posing a food safety risk to consumers. In our work, a protonated g-C3N4/oxygen-doped g-C3N4 (CNH/OCN) composite was prepared and used for the inhibition of F. graminearum growth and DON accumulation in barley malt under visible light irradiation. The results showed that the inhibition rate of F. graminearum reached 100 % after 2.5 h of visible light irradiation, and the inhibition effect was still stable after 3 rounds of reuse. The possible pathway of inhibiting F. graminearum spores was that the photogenerated carriers in the CNH/OCN composite transferred in the form of a type II homojunction under visible light and stimulated O2 in the catalytic system to produce a large amount of O2- to kill spores. Compared with the untreated malt, the photocatalytic inhibition rates of the CNH/OCN composite material for ergosterol and DON in malt reached 73.33 % and 67.25 %, respectively. Although photocatalysis had a certain effect on the physicochemical indices of malt, the malt after photocatalysis still met the first-grade standard of Chinese industry standard QB/T 1686-2008.

Highly sensitive electrochemical detection of carbendazim residues in water by synergistic enhancement of nitrogen-doped carbon nanohorns and polyethyleneimine modified carbon nanotubes.

Carbendazim (CBZ) can protect crops from pathogens, but it is also easy to cause pesticide residues, threatening human health. In our work, an electrochemical sensor based on nitrogen-doped carbon nanohorns (N-CNHs) and polyethyleneimine-modified carbon nanotubes (PEI-CNTs) was developed for the detection of CBZ content in water. The results showed that N-doping provided the CN bonds for CNHs and improved the electrochemical reaction performance of N-CNHs surface. With the participation of PEI, the surface of CNTs was positively charged and contained a large number of NH bonds, which not only promoted the electrostatic assembly of N-CNHs and PEI-CNTs but also was beneficial to further enriching CBZ. After further ultrasound-assisted assembly of N-CNHs and PEI-CNTs, the electron transfer capacity, electrochemical active surface area, and catalytic activity of N-CNHs/PEI-CNTs were significantly improved. The sensor performed a wider linear range (15 nmol/L ~ 70 µmol/L), low detection limit (4 nmol/L) and satisfactory recovery (87.33 % ~ 117.67 %) under the optimal conditions. In addition, the sensor had good anti-interference, reproducibility, and stability. Our work provided a new strategy for quantification of CBZ in environment.

Electrochemical Determination of Capsaicinoids Content in Soy Sauce and Pot-Roast Meat Products Based on Glassy Carbon Electrode Modified with Β-Cyclodextrin/Carboxylated Multi-Wall Carbon Nanotubes.

The rapid quantification of capsaicinoids content is very important for the standardization of pungent taste degree and flavor control of soy sauce and pot-roast meat products. To rapidly quantify the capsaicinoids content in soy sauce and pot-roast meat products, an electrochemical sensor based on ß-cyclodextrin/carboxylated multi-wall carbon nanotubes was constructed and the adsorptive stripping voltammetry method was used to enrich samples in this study. The results showed that the excellent performance of the established electrochemical sensor was mostly because ß-cyclodextrin caused the relative dispersion of carboxylated multi-wall carbon nanotubes on the glassy carbon electrode surface. Capsaicin and dihydrocapsaicin had similar electrochemical behavior, so the proposed method could determine the total content of capsaicinoids. The linearity of capsaicinoids content was from 0.5 to 100 µmol/L and the detection limit was 0.27 µmol/L. The recovery rates of different capsaicinoids content were between 83.20% and 136.26%, indicating the proposed sensor could realize trace detection of capsaicinoids content in sauce and pot-roast meat products. This work provides a research basis for pungent taste degree standardization and flavor control in the food industry.

Expression and Prognostic Significance of PD-L2 in Diffuse Large B-Cell Lymphoma.

Recent studies suggest that programmed death ligand-2 (PD-L2) constitutes an important antitumor immune response. Here, we investigated the relationship between PD-L2 expression and clinicopathological features in diffuse large B-cell lymphoma (DLBCL). Immunohistochemistry showed that positive expression of PD-L2 was observed in 45 of 181 newly diagnosed patients, including 14 cases with expression exclusively on tumor cells (TCs) and 31 cases with the expression on both TCs and immune cells (ICs) in the tumor microenvironment (TME). In 21 recurrent patients, positive expression of PD-L2 was present in six cases, including two cases with expression exclusively on TCs, and four cases with the expression on both TCs and ICs in the TME. Patients with PD-L2 tumor proportion score (TPS) ≥1% exhibited a better ECOG performance status (PS) (ECOG PS score <2, P = 0.041), lower international prognostic index (IPI) score (P < 0.001), and early Ann Arbor stage (Ann Arbor stage I or II, P = 0.010). Similarly, patients with PD-L2 immune proportion score (IPS) ≥1% also exhibited a better ECOG PS (ECOG PS score < 2, P = 0.006) and lower IPI score (P = 0.001). Survival analysis showed that patients with PD-L2 TPS ≥1% exhibited prolonged overall survival (OS) and progression-free survival (PFS). However, survival analysis showed no prognostic significance based on expression of PD-L2 on ICs in the TME. TC PD-L2 expression was significantly associated with OS (P = 0.041) and PFS (P = 0.001). In the multivariate analysis, TC PD-L2 expression was an independent prognostic risk factor for PFS (P = 0.013), but not for OS (P = 0.249). Furthermore, we found that higher TC and IC PD-L2 expression was associated with higher objective response rate (ORR). Moreover, we demonstrated that the expression level of PD-L2 was positively correlated with the expression status of M1 macrophage markers CD86. Our findings highlight PD-L2 as a promising therapeutic target in DLBCL.

Label free structure-switching fluorescence polarization detection of chloramphenicol with truncated aptamer.

In this study, the original chloramphenicol aptamer containing 80 bases was truncated to 30 bases with high affinity by the SYBR Green I assay. It was found that the ionic strength and type affect the recognition of aptamers, especially magnesium ion played a vital role in the binding process. Furthermore, the binding performance of aptamer, including binding mode, key binding sites and conformational changes were further investigated by circular dichroism spectroscopy, UV-vis absorption spectrum and molecular docking. Based on these research data, we inferred that chloramphenicol bound to the minor groove region in the aptamer double helix. Finally, the optimized aptamer LLR10 was used to develop a novel label free fluorescence polarization assay to detect chloramphenicol within SYBR Green I as the source of fluorescence polarization signal. Under optimal conditions, the designed method showed a linear detection range of 0.1-10 nM with a detection limit of 0.06 nM. Additionally, the aptasensor exhibited a high accuracy to the detection of chloramphenicol in milk samples with a recovery rate from 93.7% to 98.4%. Therefore, the developed label free fluorescence polarization aptasensor provides a new idea for the rapid, reliable and sensitive detection of chloramphenicol, which can be applied to food safety control.

Structure-switching fluorescence aptasensor for sensitive detection of chloramphenicol.

The performance of chloramphenicol aptamer, including binding thermodynamics, structure switching, and binding domain, was investigated by isothermal titration calorimetry, circular dichroism, and molecular docking. Then, a new fluorescence aptasensor was developed with signal amplification mediated by exonuclease I-catalyzed reaction and hybridization chain reaction (HCR) for chloramphenicol detection. In this system, the aptamer-binding domain is blocked by the initiator of HCR, the aptamer undergoes structure switching in the presence of chloramphenicol, and DNA dissociation occurs. The released aptamer is subsequently recognized and cleaved by Exo I to set free chloramphenicol. With the Exo I-assisted chloramphenicol recycling, an increasing number of initiators were exposed from the digestion of the initiator-aptamer complex. Then, the chain-like assembly of FAM labeled H1 and H2 through HCR was triggered by the initiator, generating a long DNA polymer. Under optimum conditions, the aptasensor exhibited a log-linear range from 0.001 to 100 nM of chloramphenicol and a detection limit of 0.3 pM. Additionally, the designed biosensing platform was applied to determine chloramphenicol in milk and lake water with high accuracy. The current approach provides a new avenue to develop sensitive aptasensors with the assistance of binding mechanism between aptamer and target compounds. Graphical abstract.