Pollution characteristics of heavy metals, antibiotic and antibiotic resistance genes in the crested ibis and their habitat across different lifestyle and geography.

Antibacterial resistance in wild animals has been increasingly reported worldwide, even though they are usually not directly exposed to clinically relevant antibiotics. Crested ibis, one of the rarest birds in the world, usually forages in paddy fields and prefer to nest and breed near villages that is greatly influenced by anthropogenic activities. We sampled the feces of crested ibises, as well as their habitat environment samples, to explore the pollution characteristics of heavy metals, antibiotics and antibiotic resistance genes (ARGs). Results showed that the pollution characteristics of heavy metals, antibiotic, ARGs and gut microbiota of crested ibis were more related by host lifestyle and habitats. Captive ibises had higher relative abundances of the total ARGs and tetracycline concentrations compared with feralization and wild ibises, while the heavy metal contents had shown the opposite result. The Characteristics of pollutants in the corresponding environmental samples also exhibited high similarity with the results of fecal samples. The relative abundances of Proteobacteria and Actinobacteria were significantly different between captive and wild individuals, while the abundance of majority bacterial genera was generally higher in wild populations. The concentrations of heavy metals in soil (Cd, Cu and Zn) and water (Cd, Cu, Zn and Cr) were both exceeded the background soil levels or surface water quality standards, suggesting multi-element contamination in the habitat. Ecological risk assessments of soils by Igeo and Er showed that the habitats of wild ibises were heavily and moderately contaminated by Cd, which would possibly pose a threat to the health of ibises. PLS-PM analysis indicated that microbial compositions and residual antibiotics had the most substantial impact on the dynamic changes in ARGs of ibis. Overall, this work provides a comprehensive understanding of the characteristics, risks of those contaminations, and their effects on the ARGs in the habitat of crested ibis.

The heterogeneous distribution of heavy metal(loid)s at a smelting site and its potential implication on groundwater.

The downward migration of soil heavy metal(loid)s (HMs) at smelting sites poses a significant risk to groundwater. Therefore, it is requisite for pollution control to determine the pollution characteristics of soil HMs and their migration risks to groundwater. 198 soil samples collected from a Pb-Zn smelting site were classified into 6 clusters by self-organizing map (SOM) and K-means clustering. Cd, Zn, As, and Pb were identified as the characteristic contaminants of the site. The driving factors for the heterogeneous distribution of HMs have been validated through the implementation of K-means clustering and multiple-hits calculation. Using ultrafiltration extraction and microscopic analysis, the soil colloids were identified as crucial carriers facilitating the migration of HMs. Specifically, the colloidal fractions of Cd, Zn, and As, Pb in deep soil (3-4 m) accounted for 91 %, 78 %, 88 %, and 82 %, respectively, consistently surpassing those found in topsoil (0-0.5 m). It was primarily attributed to the strong affinity of HMs toward soil colloids (franklinite, PbS, and kaolinite) and dissolved organic matter (humic acids and protein). The research findings highlight the potential risk of colloidal HMs to groundwater contamination, providing valuable insights for the development of targeted management and remediation strategies.

Phase tracking using a Kalman filter based on probability density distribution in frequency-scanning interferometry.

Frequency-scanning interferometry (FSI) utilizing external cavity diode lasers (ECDL) stands out as a potent technique for absolute distance measurement. Nevertheless, the inherent scanning nonlinearity of ECDL and phase noise pose a challenge, as it can compromise the accuracy of phase extraction from interference signals, thereby reducing the measurement accuracy of FSI. In this study, we propose a composite algorithm aimed at mitigating non-orthogonal errors by integrating the least-squares and Heydemann correction technique. Furthermore, we employ Kalman filtering for precise phase tracking. We introduce a parameter selection strategy based on the statistical distribution of instantaneous frequency to achieve the fusion estimation of phase observation values and theoretical models, which starts a new perspective for the application of multi-dimensional data fusion in FSI measurement. Through simulation and experimental validation, the efficacy of this approach is confirmed. The experimental results show promising outcomes: with an average phase error of 0.12%, a standard deviation of less than 1.7 µm in absolute distance measurement, and an average positioning accuracy error of 0.29 µm.

Divergent effects of single and combined stress of drought and salinity on the physiological traits and soil properties of Platycladus orientalis saplings.

Drought and salinity are two abiotic stresses that affect plant productivity. We exposed 2-year-old Platycladus orientalis saplings to single and combined stress of drought and salinity. Subsequently, the responses of physiological traits and soil properties were investigated. Biochemical traits such as leaf and root phytohormone content significantly increased under most stress conditions. Single drought stress resulted in significantly decreased nonstructural carbohydrate (NSC) content in stems and roots, while single salt stress and combined stress resulted in diverse response of NSC content. Xylem water potential of P. orientalis decreased significantly under both single drought and single salt stress, as well as the combined stress. Under the combined stress of drought and severe salt, xylem hydraulic conductivity significantly decreased while NSC content was unaffected, demonstrating that the risk of xylem hydraulic failure may be greater than carbon starvation. The tracheid lumen diameter and the tracheid double wall thickness of root and stem xylem was hardly affected by any stress, except for the stem tracheid lumen diameter, which was significantly increased under the combined stress. Soil ammonium nitrogen, nitrate nitrogen and available potassium content was only significantly affected by single salt stress, while soil available phosphorus content was not affected by any stress. Single drought stress had a stronger effect on the alpha diversity of rhizobacteria communities, and single salt stress had a stronger effect on soil nutrient availability, while combined stress showed relatively limited effect on these soil properties. Regarding physiological traits, responses of P. orientalis saplings under single and combined stress of drought and salt were diverse, and effects of combined stress could not be directly extrapolated from any single stress. Compared to single stress, the effect of combined stress on phytohormone content and hydraulic traits was negative to P. orientalis saplings, while the combined stress offset the negative effects of single drought stress on NSC content. Our study provided more comprehensive information on the response of the physiological traits and soil properties of P. orientalis saplings under single and combined stress of drought and salt, which would be helpful to understand the adapting mechanism of woody plants to abiotic stress.

The response of physiological and xylem anatomical traits under cadmium stress in Pinus thunbergii seedlings.

Studying the response of physiological and xylem anatomical traits under cadmium stress is helpful to understand plants' response to heavy metal stress. Here, seedlings of Pinus thunbergii Parl. were treated with 50, 100 and 150 mg kg-1 Cd2+ for 28 days. Cadmium and nonstructural carbohydrate content of leaves, stems and roots, root Cd2+ flux, cadmium distribution pattern in stem xylem and phloem, stem xylem hydraulic traits, cell wall component fractions of stems and roots, phytohormonal content such as abscisic acid, gibberellic acid 3, molecule -indole-3-acetic acid, and jasmonic acid from both leaves and roots, as well as xylem anatomical traits from both stems and roots were measured. Root Cd2+ flux increased from 50 to 100 mmol L-1 Cd2+ stress, however it decreased at 150 mmol L-1 Cd2+. Cellulose and hemicellulose in leaves, stems and roots did not change significantly under cadmium stress, while pectin decreased significantly. The nonstructural carbohydrate content of both leaves and stems showed significant changes under cadmium stress while the root nonstructural carbohydrate content was not affected. In both leaves and roots, the abscisic acid content significantly increased under cadmium stress, while the gibberellic acid 3, indole-3-acetic acid and jasmonic acid methylester content significantly decreased. Both xylem specific hydraulic conductivity and xylem water potential decreased with cadmium stress, however tracheid diameter and double wall thickness of the stems and roots were not affected. High cadmium intensity was found in both the stem xylem and phloem in all cadmium stressed treatments. Our study highlighted the in situ observation of cadmium distribution in both the xylem and phloem, and demonstrated the instant response of physiological traits such as xylem water potential, xylem specific hydraulic conductivity, root Cd2+ flux, nonstructural carbohydrate content, as well as phytohormonal content under cadmium stress, and the less affected traits such as xylem anatomical traits, cellulose and hemicellulose.

Synchronous filtering method for improving the optical signal-to-noise ratio of a tunable laser based on the Fabry-Pérot interferometer.

Optical measurements are closely related to the optical signal-to-noise ratio (OSNR) of the laser, which can be improved using a tunable optical filter (TOF) to suppress frequency noise. For an external-cavity tunable laser with a tuning range larger than the TOF bandwidth, the wavelength at the center of the TOF passband must be varied based on the laser tuning. This study proposes a tunable-laser OSNR-enhancement method based on the Fabry-Pérot (FP) interferometer. The FP signal contains the wavelength information of the swept laser, which can be used to determine the real-time driving voltage of the TOF. Notably, the laser needs to be continuously tunable without mode hopping, and the free spectral range of the FP interferometer must be smaller than the TOF bandwidth.

MXene/Cellulose Hydrogel Composites: Preparation and Adsorption Properties of Pb2.

In this work, acrylic cellulose hydrogel, a typical natural polymer adsorbent, was modified using MXene through in situ polymerization to create a synthetic inorganic-polymer composite known as MXene/cellulose hydrogel. FTIR, XRD, SEM, and thermogravimetric analyses were applied to characterize the chemical structure and micromorphology. The MXene/cellulose hydrogel was utilized for the removal of Pb2+ from wastewater. Under optimal experimental conditions (initial Pb2+ concentration of 0.04 mol/L, adsorption time of 150 min, pH = 5.5, and MXene doping content of 50% at 30 °C), a maximum adsorption capacity of 410.57 mg/g was achieved. The MXene/cellulose hydrogel corresponded with the pseudo-second-order kinetic equation model and exhibited a better fit with the Freundlich isotherm model.

Soil health improvement by inoculation of indigenous microalgae in saline soil.

Using biological methods to improve saline soils is recognized as an eco-friendly and sustainable way. In this study, two indigenous algae YJ-1 and YJ-2 screened from salinized farmland were inoculated into saline soils with different salinization levels to investigate their potential in enhancing soil health by laboratory microcosm experiment. The results showed that individual inoculation of the two algae quickly resulted in the formation of algal crusts, and the chlorophyll content in the saline soils gradually increased with the incubation time. The soil pH decreased significantly from the initial 8.15-9.45 to 6.97-7.56 after 60-day incubation. The exopolysaccharides secretion and the activities of catalase, sucrase, and urease in saline soils also increased. Microalgal inoculation increased soil organic matter storage, while decreasing the available nutrient contents possibly due to the depletion of microalgal growth. PCA and PCC results identified that microalgal biomass as the predominant variable affecting soil quality. Overall, these data revealed the great potential of microalgae in the amelioration of saline soils, especially in pH reduction and enzyme activity enhancement. This study will provide the theoretical foundation for improving saline soils via algalization.

Microbial weathering of montmorillonite and its implication for Cd(II) immobilization.

Interactions between silicate bacteria and silicates are very common in nature and hold great potential in altering their mutual physicochemical properties. But their interactions in regulating contaminants remediation involving performance and mechanisms are often overlooked. Here, we focused on the interactions between silicate bacteria (Paenibacillus polymyxa, PP; Bacillus circulans, BC) and a soil silicate montmorillonite (Mt), and their impact on Cd(II) immobilization. The obtained results showed that Mt greatly promoted the growth of the bacteria, resulting in a maximum 10.31 times increase in biomass production. In return, the bacteria strongly enhanced the Cd(II) adsorption on Mt, with adsorption capacities increased by 80.61%-104.45% in comparison to the raw Mt. Additionally, the bacteria-Mt interaction changed Cd(II) to a more stabilized state with a maximum reduction of 38.90%/g Mt in bioavailability. The enhancement of Cd(II) adsorption and immobilization on the bacterial modified Mt was caused by the following aspects: (1) the bacteria activities altered the aggregation state of Mt and made it better dispersed, thus more active sites were exposed; (2) the microbial activities brought about more rough and crumpled surface, as well as smaller Mt fragments; (3) a variety of microbial-derived functional groups were introduced onto the Mt surface, increasing its affinity for heavy metals; (4) the main Cd(II) immobilization mechanism was changed from ion exchange to the combination of ion exchange and functional groups induced adsorption. This work elucidates the potential ecological and evolutionary processes of silicate bacteria-soil clay mineral interactions, and bears direct implications for the clay-mediated bioremediation of heavy metals in natural environments.

Enhance antimony adsorption from aquatic environment by microwave-assisted prepared Fe3O4 nanospherolites.

A novel hierarchically nanostructured magnetite (Fe3O4) was manufactured using microwave-assisted reflux method without surfactants. The nanostructured Fe3O4 is formed via the co-precipitation of Fe(III) and Fe(II), followed by a nanocrystal aggregation-based mechanism. Moreover, the effects of solution pH, contact time, initial Sb concentration, coexisting anions, and recycle numbers on the adsorption of nanostructured Fe3O4 toward Sb were extensively examined in the batch adsorption tests. The results demonstrated that the obtained Fe3O4 exhibited excellent adsorption ability toward Sb with the maximum adsorption capacities of 154.2 and 161.1 mg.g-1 for Sb(III) and Sb(V), respectively. The prepared Fe3O4 could be easily regenerated and reused for adsorption/desorption studies multiple times without compromising the Sb adsorption ability. Further exploration indicated that the oxidation or reduction reactions infrequently occurred during Sb adsorption processes. The proposed hierarchically nanostructured Fe3O4 thus could be potentially used for sustainable and efficient antimony removal.

High-precision phase retrieval method for speckle suppression based on optimized modulation masks.

Traditional methods of coherent diffraction imaging using random masks result in an insufficient difference between the diffraction patterns, making it challenging to form a strong amplitude constraint, causing significant speckle noise in the measurement results. Hence, this study proposes an optimized mask design method combining random and Fresnel masks. Increasing the difference between diffraction intensity patterns enhances the amplitude constraint, suppresses the speckle noise effectively, and improves the phase recovery accuracy. The numerical distribution of the modulation masks is optimized by adjusting the combination ratio of the two mask modes. The simulation and physical experiments show that the reconstruction results of PSNR and SSIM using the proposed method are higher than those using random masks, and the speckle noises are effectively reduced.

Performance of heavy metal-immobilizing bacteria combined with biochar on remediation of cadmium and lead co-contaminated soil.

Heavy metal pollution of soil has become a public concern worldwide since it threats food safety and human health. Sustainable and environmental-friendly remediation technology is urgently needed. Therefore, we investigated the properties and heavy metal removal ability of Enterobacter asburiae G3 (G3), Enterobacter tabaci I12 (I12), and explored the feasibility of remediation Cd, Pb co-contaminated soil by the combination of G3/I12 and biochar. Our results indicated that both strains are highly resistant to Cd, Pb and maintain plant growth-promoting properties. The removal efficiency of G3 for Cd and Pb were 76.79-99.43%, respectively, while the removal efficiency of I12 for Cd and Pb were 62.57-99.55%, respectively. SEM-EDS and XRD analysis revealed that the morphological and structural changes occurred upon heavy metal exposure, metal precipitates were also detected on cell surface. FTIR analysis indicated that functional groups (-OH, -N-H, -C = O, -C-N, -PO4) were involved in Cd/Pb immobilization. Application of the bacteria, biochar, or their combination decreased the acid-extractable Cd, Pb in soil while increased the residual fractions, meanwhile, the bioavailability of both metal elements declined. Besides, these treatments increased soil enzyme (sucrase, catalase and urease) activity and accelerated pakchoi growth, heavy metal accumulation in pakchoi was depressed upon bacteria and/or biochar application, and a synergistic effect was detected when applying bacteria and biochar together. In BC + G3 and BC + I12 treated plants, the Cd and Pb accumulation decreased by 24.42% and 52.19%, 17.55% and 47.36%, respectively. Overall, our study provides an eco-friendly and promising in situ technology that could be applied in heavy metal remediation.

Capturing effects of filamentous fungi Aspergillus flavus ZJ-1 on microalgae Chlorella vulgaris WZ-1 and the application of their co-integrated fungi-algae pellets for Cu(II) adsorption.

Using filamentous fungi to capture unicellular microalgae is an effective way for microalgae recovery in water treatment. Here, fungi Aspergillus flavus ZJ-1 and microalgae Chlorella vulgaris WZ-1 isolated from a copper tailings pond were used to study the capture effect of ZJ-1 on WZ-1. The highest capture efficiency (97.85%) was obtained within 6 h under the optimized conditions of 30 °C, 150 rpm, fungi-algae biomass ratio of 2.24:1, and initial pH of 9.24 in microalgae medium. The formed fungi-algae pellets (FAPs) were further used to remove Cu(II) from aqueous solution. Results showed that the FAPs formed at different capture times all adsorbed Cu(II) well, and the PAFs formed within 2 h (PAFs2 h) exhibited the highest Cu(II) adsorption capacity (80.42 mg·g-1). SEM images showed that Cu(II) caused a change in the internal structure of PAFs2 h from loose to compact, the mycelium shrunk, and the microalgal cells were concave. Cu(II) adsorption by PAFs2 h was well conformed to the pseudo-second-order kinetics and the Langmuir isotherm (123.61 mg·g-1 of theoretically maximum adsorption capacity). This work opens a way for applying FAPs in the remediation of heavy metal-contaminated wastewater, and the metal adsorption effect was determined by the capture amount of microalgae.

Effect of organic acids and soil particle size on heavy metal removal from bulk soil with washing.

To evaluate the effect of soil particle size on heavy metals removal by washing, two soil samples were collected around a lead-zinc mining area (SM) and lead-zinc smelter (SS). The total content of Cd, Pb and Zn in SM and SS were determined. And the effect of soil particle size on Cd removal by low molecular organic acids was studied. The results showed that Cd was the main pollutant and the total content of Cd in SS can reach to 24.8 mg Kg-1. 68.4% of the total Cd in SM existed in the form of residual state, while 54.7% of the total Cd in SS was in weak acid extractable state. About 50.0% of the Cd distributed in < 2 µm soil size fraction. The washing results indicated that citric acid was a highly efficient eluent among the five low molecular weight organic acids (citric acid, malic acid, tartaric acid, oxalic acid and acetic acid). After washing, 40% and 69.6% of the total Cd in SS and SM can be removed by citric acid, respectively. While only 18.7-40.2% and 32.6-68.7% of Cd was removed from different size fractions of SM and SS, respectively. The species of Cd in soil size fractions affected the removal effect of citric acid. The citric acid can easily remove the weak acid extractable and reducible form of Cd in soil. After eluted by citric acid, the bioavailability of Cd in soil decreased markedly, and the highest decreasing rate reached 93%.

Amino-modified chitosan/gold tailings composite for selective and highly efficient removal of lead and cadmium from wastewater.

In this work, a novel amino-modified chitosan/tailings composite (CS-PEI-nGT) was successfully synthesized from gold tailings particle treated by ball milling (nGT), chitosan (CS) and polyethyleneimine (PEI) as raw materials, for Lead (Pb(Ⅱ)) and Cadmium (Cd(Ⅱ)) removal from aqueous solutions. The CS-PEI-nGT was characterized by using FTIR, XRD, SEM, BET, TGA and XPS techniques. The results showed that CS-PEI-nGT had maximum adsorption capacity of 192.78 mg·g-1 and 99.46 mg·g-1 for Pb(Ⅱ) and Cd(Ⅱ) respectively at pH 5. The adsorption kinetics was described well by pseudo-second-order kinetic adsorption model, and suggested that chemisorption as the rate-controlling step for adsorption of Pb(Ⅱ) and Cd(Ⅱ). The isotherm data was accurately explained by Langmuir model with higher correlation coefficient (R2) of 0.9911 and 0.9642 for Pb(Ⅱ) and Cd(Ⅱ) respectively. In addition, CS-PEI-nGT retained its selective adsorption capacity for Pb(Ⅱ) and Cd(Ⅱ), compared to other metals such as Zn(Ⅱ), Mn(Ⅱ), Mg(Ⅱ) and Al(Ⅲ). The mechanism of the adsorption was investigated and the results revealed that amino (-NH2), silicon oxide groups (Si-O) and hydroxyl (-OH) functional groups on composite surface were accountable for metals adsorption, suggesting surface complexation, electrostatic interactions and ion exchange. Our work presents a promising strategy for tailings recycling and highly efficient removal of toxic metals ions from wastewater.

Marked changes in biochar's ability to directly immobilize Cd in soil with aging: implication for biochar remediation of Cd-contaminated soil.

To investigate the change in biochar's ability to directly immobilize Cd in soil, a successive wheat cultivation experiment was conducted. Three biochars with different Cd adsorption mechanisms were added to the soils, and a mesh bag was used to separate the soil particles (> 1 µm) from the biochar. The results showed that the ash contents and anionic contents (CO32- and PO43-) of the biochar decreased with the cultivation time, while the oxygen-containing functional group content and CEC of the biochar increased. As a result, the Cd concentration on biochar decreased, by 68.9% for WBC300, while unstable Cd species (acid soluble and reducible fraction of Cd) on biochar increased with successive cultivation, increasing from 3 to 17% for WBC300 in FS. Correspondingly, the ability of biochar to inhibit Cd accumulation in wheat decreased. The results of this study illustrated that the ability of biochar to directly immobilize Cd in soil is not permanent; it gradually decreases with aging in soil. The adsorption mechanism of Cd on biochar changed from precipitation to complexation, and ion exchange processes could be the main reason.

The potential effectiveness of mixed bacteria-loaded biochar/activated carbon to remediate Cd, Pb co-contaminated soil and improve the performance of pakchoi plants.

Cadmium (Cd) and lead (Pb) are toxic heavy metals that cause severe soil pollution and pose health risks to humans. It is urgent to develop feasible strategies for Pb and Cd remediation. In this study, a bacteria consortium (Enterobacter asburiae G3, Enterobacter tabaci I12 and Klebsiella variicola J2 in a 1:3:3 proportion) with optimal Cd, Pb adsorption ability was constructed and immobilized on biochar (BC)/activated carbon (AC) via physisorption and sodium alginate encapsulation. The effects of mixed bacteria-loaded BC/AC on Cd and Pb remediation were investigated. The results indicated that their application reduced the DTPA-extractable Cd, Pb in soil by 22.05%-55.84% and 31.64%-48.13%, respectively. The residual Pb, Cd were increased while the exchangeable fractions were decreased. Soil urease, catalase and phosphatase activities were enhanced and soil bacterial community was improved, indicating a soil quality improvement. Consequently, the biomass of pakchoi plants was significantly increased. Cd and Pb in the shoots of pakchoi plants were decreased by 28.68%-51.01% and 24.18%-52.87%, respectively. Collectively, the bacteria-loaded BC/AC showed superior performance than free bacteria, BC and AC alone. Our study may provide a better understanding of the development of green and sustainable materials for remediation of heavy metal by the combination of BC/AC and functional bacteria.

Polypyrrole-Bentonite composite as a highly efficient and low cost anionic adsorbent for removing hexavalent molybdenum from wastewater.

The aim of current study was to develop a new material for the fast and efficient removal of hexavalent molybdenum (Mo(VI)) from contaminated water. In this work, a novel adsorbent was synthesized through the polypyrrole intercalation modification of bentonite (PPy-BT) via in-situ chemical polymerization method for effectively removal of Mo(VI) from aqueous solution. The surface morphology and chemical composition of PPy-BT composites were investigated by X-ray diffraction, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectrometer, scanning electron microscopy techniques and X-ray photoelectron spectroscopy. PPy and BT could well resist the aggregation of each other, and therefore resulted in a loose-packed structure and good exposure of active sites. Using materials for the adsorption of Mo(VI) revealed has a maximum adsorption capacity of 100.17 mg/g at 25 °C and pH 4.0 by the Langmuir model. The adsorption kinetics and isotherm data are found to be well elucidated through pseudo-second-order and Langmuir models. Moreover, high regeneration ability (>89.3%) of PPy-BT was noted for five consecutive adsorption-desorption cycles. These findings highlight the potential of PPy-BT for practical water treatment applications. The intercalation material of PPy-BT could provide a new strategy to develop cost-effective clay-based nanomaterials for wastewater treatment.

Cd diminution through microbial mediated degraded lignocellulose maize straw: Batch adsorption and bioavailability trails.

Lignocellulose degraded maize straw (LMS) was prepared with the interaction of soil-indigenous microorganisms and further deployed to attenuate the Cd contamination in polluted soil. The Lignocellulose degrading ratio was determined and results revealed the significant degradation of cellulose, hemicellulose and lignin by 33.03, 26.7 and 15.97% respectively as compared to pristine maize straw (PS). Moreover, LMS was also categorized through FE-SEM, FTIR, BET analysis, elemental analysis and XPS technique and the analytical results indicated that lignocellulose structure in maize straw was successfully degraded and was involved in metal-ion complexation. Batch sorption trials revealed that Cd2+ sorption onto LMS was explained well by Langmuir isotherm and pseudo-second-order kinetic model. The LMS showed maximum adsorption capacities (9.84 mg g-1) for Cd2+ as compared to PS (3.30 mg g-1). Moreover, the soil incubation trials (60 days) depicted the availability of Cd decreased by 11.03 and 34.7% with PS and LMS application respectively. The addition of LMS significantly decreased the exchangeable fractions of Cd and ensued an increase in organic matter and Fe-Mn oxides bound fractions. This work clarified the LMS as a promising amendment for effective remediation of Cd-contaminated matrices.

Incorporating in vitro bioaccessibility into human health risk assessment of heavy metals and metalloid (As) in soil and pak choi (Brassica chinensis L.) from greenhouse vegetable production fields in a megacity in Northwest China.

The rapid development of greenhouse vegetable production (GVP) in densely populated areas may cause the heavy metal/metalloid accumulation in soil and pose a threat to human health. In this study, 180 pairs of topsoil and pak choi (Brassica chinensis L.) samples were collected from GVP fields in Xi'an city in Northwest China to analyze health risks of Cd, Cr, Pb, and As in soil and pak choi combining in vitro bioaccessibility investigation. The results showed that Cd and Cr were common pollutants in both soil and pak choi. In the soil-pak choi system, the indexes of non-carcinogenic and carcinogenic risk for adults and children were 1.53, 2.68, and 1.37 × 10-4, 8.14 × 10-5, respectively, thereby indicating the presence of heavy metal/metalloid health risks for both groups. Based on the results, procedures to mitigate heavy metal/metalloid contamination risks should be discussed more during the development of GVP in the largest city in Northwest China.