RESUMEN
To address the potential hazards of organophosphorus pesticides (OPs) residues in tea, an electrochemiluminescence (ECL) aptasensor based on functionalized nanomaterials was constructed in this work. Firstly, gold nanoparticles (AuNPs) were attached on the surface of multi-walled carbon nanotubes (MWCNTs) by the constant potential electrodeposition to form a compound, and it was utilized to provide excellent immobilization sites for complementary DNA (cDNA). Subsequently, composite nanomaterials were synthesized by a one-pot method with aminated Luminol/silver nanoparticles@silica nanospheres (NH2-Luminol/Ag@SiO2NSs). Finally, NH2-Luminol/Ag@SiO2NSs was combined with a malathion aptamer (Apt) to obtain signal probes (SPs) for the construction of an aptasensor. The aptasensor had a wide linear range (1×10-3-1×103 ng/mL) and a low limit of detection (LOD) (0.3×10-3 ng/mL). It had the virtues of high sensitivity, wonderful stability and excellent specificity, which could be used for the detection of malathion residue in tea. The work provides a proven way for the construction of a rapid and ultrasensitive aptasensor with low-cost.
Asunto(s)
Aptámeros de Nucleótidos , Técnicas Electroquímicas , Oro , Límite de Detección , Mediciones Luminiscentes , Luminol , Malatión , Nanopartículas del Metal , Dióxido de Silicio , Plata , Té , Malatión/análisis , Malatión/química , Té/química , Nanopartículas del Metal/química , Luminol/química , Plata/química , Técnicas Electroquímicas/métodos , Mediciones Luminiscentes/métodos , Dióxido de Silicio/química , Oro/química , Aptámeros de Nucleótidos/química , Residuos de Plaguicidas/análisis , Nanotubos de Carbono/química , Contaminación de Alimentos/análisis , Técnicas Biosensibles/métodosRESUMEN
In this study, a multi-scale attention transformer (MSAT) was coupled with hyperspectral imaging for classifying peanut kernels contaminated with diverse Aspergillus flavus fungi. The results underscored that the MSAT significantly outperformed classic deep learning models, due to its sophisticated multi-scale attention mechanism which enhanced its classification capabilities. The multi-scale attention mechanism was utilized by employing several multi-head attention layers to focus on both fine-scale and broad-scale features. It also integrated a series of scale processing layers to capture features at different resolutions and incorporated a self-attention mechanism to integrate information across different levels. The MSAT model achieved outstanding performance in different classification tasks, particularly in distinguishing healthy peanut kernels from those contaminated with aflatoxigenic fungi, with test accuracy achieving 98.42±0.22%. However, it faced challenges in differentiating peanut kernels contaminated with aflatoxigenic fungi from those with non-aflatoxigenic contamination. Visualization of attention weights explicitly revealed that the MSAT model's multi-scale attention mechanism progressively refined its focus from broad spatial-spectral features to more specialized signatures. Overall, the MSAT model's advanced processing capabilities marked a notable advancement in the field of food quality safety, offering a robust and reliable tool for the rapid and accurate detection of Aspergillus flavus contaminations in food.
Asunto(s)
Arachis , Aspergillus flavus , Contaminación de Alimentos , Microbiología de Alimentos , Aspergillus flavus/aislamiento & purificación , Arachis/microbiología , Contaminación de Alimentos/análisis , Inocuidad de los Alimentos , Aflatoxinas/análisis , Imágenes Hiperespectrales/métodosRESUMEN
A lateral flow immunoassay strip (LFIAS) is one of the most frequently rapid test technologies for carbofuran (CAR). Nevertheless, the LFIAS has a poor quantitative capability and low sensitivity. And, it also requires often complex sample handling steps, making testing time longer. In this study, Fe3O4 nanoparticles were successively modified with MIL-100(Fe)-based metal-organic framework (MOF) and chloroplatinic acid hexahydrate to obtain a core-shell complex of Fe3O4-MOF-Pt. The complex had a peroxidase-mimicking activity catalytic function that enabled signal amplification and sensitivity enhancement. Upon coupling with carbofuran monoclonal antibody (CAR-mAb), the magnetic separation properties of the probe enabled target-specific enrichment. The LFIAS based on Fe3O4-MOF-Pt nanocomposites could detect CAR in the range of 0.25-50 ng mL-1 with a limit of detection (LOD) of 0.15 ng mL-1, enabling colorimetric and catalytic analysis. In addition, the method showed high specificity and stability for detecting CAR in various vegetables, and recovery rates of the spiked samples were 91.40%-102.40%. In conclusion, this study provided one-stop detection of "target enrichment-visual inspection". While lowering the LOD, it reduced the detection time and improved the detection efficiency. The multifunctional Fe3O4-MOF-Pt nanocomposite provides an idea for the construction of novel multifunctional probes to improve the detection performance of conventional LFIAS.
Asunto(s)
Carbofurano , Límite de Detección , Verduras , Carbofurano/análisis , Verduras/química , Inmunoensayo/métodos , Contaminación de Alimentos/análisis , Estructuras Metalorgánicas/química , Platino (Metal)/química , Anticuerpos Monoclonales/química , Anticuerpos Monoclonales/inmunología , Insecticidas/análisis , Nanocompuestos/química , Nanopartículas de Magnetita/químicaRESUMEN
Food safety is an important cornerstone of protecting human health and life. Therefore, it is of great significance to detect possible pollutants in food sensitively and efficiently. Molecularly imprinted polymers (MIPs) and metal-organic frameworks (MOFs) have been widely used in the adsorption and detection of food pollutants. However, traditional MIPs have problems such as uneven loading of the imprinted cavity and slow mass transfer efficiency. While the adsorption of MOFs has low specificity and cannot accurately identify target molecules. Therefore, some researchers have taken advantage of the high specific recognition abilities of MIPs and the large specific surface areas, high porosity and easy functionalization of MOFs to combine MOFs with MIPs, and have achieved a series of important results in the field of food safety detection. This paper reviews the research progress of the application of MOFs-MIPs in the field of food safety detection from 2019 to 2024. It furnishes researchers interested in this domain with a rapid and comprehensive grasp of the latest research status, it also offers them a chance to anticipate future development trends, thereby supporting the continuous advances of MOFs-MIPs in food safety detection.
Asunto(s)
Contaminación de Alimentos , Inocuidad de los Alimentos , Estructuras Metalorgánicas , Polímeros Impresos Molecularmente , Estructuras Metalorgánicas/química , Polímeros Impresos Molecularmente/química , Contaminación de Alimentos/análisis , Adsorción , Impresión Molecular , Humanos , Polímeros/químicaRESUMEN
BACKGROUND: Due to its wide application, procymidone has become one of the pesticides with high detection rates in supervision and sampling. Therefore, it is necessary to establish a rapid and efficient method for the detection of procymidone. However, an important bottleneck restricting the development of rapid detection methods of procymidone is that its specific recognition elements are rarely reported. In this work, Capture-SELEX and post-SELEX were used in aptamer screening, and the obtained aptamers were used to construct an aptamer-based lateral flow assay (LFA). RESULTS: Firstly, a specific aptamer Seq15 was obtained for procymidone by Capture-SELEX, and its dissociation constant (Kd) was 24.22 nM. Secondly, post-SELEX was used to analyze and modify Seq15 to improve its performance, and the Kd of the truncated sequence Seq15-2 was 21.28 nM. In addition to this, the broad-specificity aptamer Seq17-1 was obtained via post-SELEX. Seq17-1 could broadly recognize dicarboximide fungicides (procymidone, iprodione, chlozolinate, dimethachlon and vinclozolin) and their metabolic derivative (3,5-dichloroaniline). Finally, the specific aptamer-based LFA of procymidone was constructed, and the limit of detection (LOD) was 0.79 ng/mL. Meanwhile, the LODs of dicarboximide fungicides and their metabolic derivative were 0.62, 0.64, 0.71, 0.69, 0.64 and 0.66 ng/mL, respectively. The above LFAs were highly specific and stable, and had been successfully used for the detection of vegetable samples. SIGNIFICANCE: Under the combination of Capture-SELEX and Post-SELEX, this study not only provides specific recognition elements for rapid detection of procymidone, but also provides new ideas for the discovery of broad-specificity aptamers. Combining broad-specificity primary detection and single-specificity quantification, a composite aptamer-based LFA detection platform has been developed, which significantly improves detection efficiency.
Asunto(s)
Aptámeros de Nucleótidos , Técnica SELEX de Producción de Aptámeros , Aptámeros de Nucleótidos/química , Técnica SELEX de Producción de Aptámeros/métodos , Fungicidas Industriales/análisis , Límite de DetecciónRESUMEN
A novel dual-mode aptasensor was constructed for aminoglycoside antibiotics (AAs) detection by using a broad-spectrum aptamer as a biorecognition element, and Au-Pd@Fc functionalized by signal DNA as nanoprobes. In electrochemical mode, the target-induced cyclic amplification reaction run under the action of exonuclease-III, which increased the number of nanoprobes on the electrode surface. AAs could be quantitatively detected with LOD of 0.0355 ± 0.00613 nM. In colorimetric mode, the Au-Pd@Fc nanozyme catalyzed the color reaction of 3,3',5,5'-tetramethylbenzidine. The blue-shifted absorbance will be observed with the change of AAs concentration, and the LOD was 0.0458 ± 0.00572 nM. Furthermore, a magnetic molecular-imprinted material capable of specific adsorption of AAs was prepared on milk sample pretreatment. The aptasensor was used to detect 10 kinds of AAs in milk and the recoveries were 97.19 ± 4.41% â¼ 98.70 ± 4.45% and 96.38 ± 3.53%-97.54 ± 4.13% in electrochemical and colorimetric methods. This work provided a theoretical basis for the application of aptamers in simultaneous detection of antibiotics.
RESUMEN
In light of the significant risks that mycotoxins posed to public health and environmental safety, this research developed an adsorbent MIPs/Apt/AuNPs@ZIF-67 (MA-AZ) utilizing a dual-recognition approach combining molecularly imprinted polymers (MIPs) and aptamer (Apt). This innovative method enabled the effective and highly selective recognition and enrichment of ochratoxin A (OTA). ZIF-67 was utilized as a carrier with a substantial specific surface area, and gold nanoparticles (AuNPs) were loaded on its surface to fix the thiol-modified Apt on the surface of the carrier. Then, an initiator was used to initiate a polymerization reaction, and the generated MIPs coated Apt/AuNPs@ZIF-67, thereby synthesizing the MA-AZ with a "synergistic recognition" effect. The Apt significantly increased the number of recognition sites within the imprinted cavities, and MIPs played roles in identifying targets, fixing and protecting Apt. The combination of the both produced the effect of "1+1>2". The study on the adsorption performance of MA-AZ found that the adsorption capacity of MA-AZ could reach 65.1 mg/g, and the imprinted factor was 5.48. In addition, MA-AZ exhibited excellent stability, specificity, reusability and recovery rate. Thus, this study offers valuable insights for the recognition and enrichment of hazardous substances, and helps to promote the rapid development of safety detection.
Asunto(s)
Aptámeros de Nucleótidos , Oro , Nanopartículas del Metal , Polímeros Impresos Molecularmente , Ocratoxinas , Ocratoxinas/química , Ocratoxinas/análisis , Aptámeros de Nucleótidos/química , Adsorción , Polímeros Impresos Molecularmente/química , Nanopartículas del Metal/química , Oro/química , Impresión Molecular , Límite de Detección , Extracción en Fase Sólida/métodosRESUMEN
Stable detection of diazinon (DZN) residues in vegetables is important for food safety. In this work, an electrochemiluminescence (ECL) aptasensor with dual-catalytic glucose in-situ production of H2O2 was constructed for the stable detection of DZN in vegetables. Firstly, MWCNTs@MB was prepared using π-π stacking interactions between methylene blue (MB) and multi-walled carbon nanotubes (MWCNTs) to enhance the loading of MB on an electrode and thus catalyze the generation of H2O2 from glucose. Secondly, Cu2O@AuNPs was formed by loading AuNPs on the surface of Cu2O through spontaneous reduction reaction, which improved the interfacial charge transfer, Cu2O nano-enzyme had glucose oxidase mimicking activity and could further catalyze the production of more H2O2 from glucose. MWCNTs@MB and Cu2O@AuNPs played a key role in the in-situ generation of co-reacting reagent H2O2, which solved the problem of unstable detection caused by the easy decomposition of the H2O2 solution added to the luminescence system. In addition, the aptamer was immobilized on the electrode surface by forming Au-S bonds with Cu2O@AuNPs. As a result, the ECL aptasensor performed good linearity in 1.00 pg mL-1-1.00 µg mL-1 and a low limit of detection (LOD) to 0.39 pg mL-1 (S/N = 3). This work provided an effective method for the accurate and stable detection of DZN residues in vegetables, which was of great significance in ensuring food safety and assessing the environmental risk of DZN.
Asunto(s)
Aptámeros de Nucleótidos , Técnicas Biosensibles , Diazinón , Técnicas Electroquímicas , Glucosa , Oro , Peróxido de Hidrógeno , Mediciones Luminiscentes , Nanotubos de Carbono , Verduras , Peróxido de Hidrógeno/química , Verduras/química , Glucosa/análisis , Glucosa/química , Técnicas Electroquímicas/métodos , Aptámeros de Nucleótidos/química , Técnicas Biosensibles/métodos , Mediciones Luminiscentes/métodos , Oro/química , Nanotubos de Carbono/química , Diazinón/análisis , Diazinón/química , Nanopartículas del Metal/química , Cobre/química , Catálisis , Electrodos , Glucosa Oxidasa/química , Glucosa Oxidasa/metabolismo , Residuos de Plaguicidas/análisis , Residuos de Plaguicidas/química , Límite de Detección , Contaminación de Alimentos/análisis , Azul de Metileno/químicaRESUMEN
Time-resolved fluorescent lateral immunoassay strip (TRFLIS) is a reliable and rapid method for detecting acetamiprid. However, its sensitivity is often affected by the structural patterns and stability of the fluorescent probe. Researchers have shown significant interests in using goat anti-mouse IgG (GaMIgG) which is indirectly bound to time-resolved fluorescent microsphere (TRFM) and antibody. This allowed for oriented modification of the antibody. However, the stability of fluorescent probe in this binding mode remained unexplored. Herein, 1-ethyl-(3-dimethylaminopropyl) carbodiimide hydrochloride was innovatively used as a cross-linking agent to enhance the binding of antibody to GaMIgG, which improved the stability of the fluorescent probe. Under optimal working conditions, this strategy exhibited a wide linear response range of 5-700 ng/mL. Its limit of detection (LOD) was 0.62 ng/mL, the visual LOD was 5 ng/mL, and the limit of quantification (LOQ) of 2.06 ng/mL. Additionally, under tomato matrix, leek matrix and Chinese cabbage matrix, the linear response ranges were 5-400, 5-300, and 5-700 ng/mL, with LODs of 0.16, 0.60, and 0.41 ng/mL, with LOQs of 0.53, 2.01 and 1.37 ng/mL, respectively. In conclusion, this strategy effectively reduced the dosage of acetamiprid antibody compared with TRFM directly linking acetamiprid antibody, and greatly increased the sensitivity of TRFLIS. Meanwhile, it demonstrated outstanding specificity and accuracy in acetamiprid detection and had been successfully applied to vegetable samples. This method enables rapid and accurate detection of large-volume samples by combining qualitative and quantitative methods. As such, it has great potential in the development of low-cost and high-performance immunochromatographic platforms.
Asunto(s)
Colorantes Fluorescentes , Límite de Detección , Neonicotinoides , Neonicotinoides/análisis , Colorantes Fluorescentes/química , Inmunoensayo/métodos , Animales , Reactivos de Enlaces Cruzados/química , Contaminación de Alimentos/análisis , Insecticidas/análisis , Anticuerpos/química , Anticuerpos/inmunología , Brassica/química , Ratones , Solanum lycopersicum/químicaRESUMEN
To effectively monitor multi-residues of penicillin antibiotics (PENs) in milk, we developed a novel ratiometric electrochemical aptasensor enabling simultaneous detection of PENs. The aptasensor employed a broad-spectrum aptamer as a recognition element, niobium carbide functionalized with methylene blue (Nb2C-MB) as a reference signal generator, and a ferrocene-labeled aptamer (Fc-Apt) as an output signal. Electrodes were modified with Fe-N-C doped carbon nanotubes (Fe-N-C-CNTs) to amplify detection signals further. During detection, Fc-Apt binding to PENs decreased Fc current intensity (IFc) and increased MB current intensity (IMB). The simultaneous detection of PENs was achieved using IMB/IFc as a quantitative signal. Under optimal conditions, a good linear relationship between IMB/IFc and antibiotic concentration was observed, indicating the aptasensor had a robustness. The limits of detection of aptasensor for four penicillin antibiotics and their mixed targets were 0.093-0.191 nM. This work provides a new approach to multi-residue detection of the same class of antibiotics.
Asunto(s)
Antibacterianos , Aptámeros de Nucleótidos , Técnicas Biosensibles , Técnicas Electroquímicas , Contaminación de Alimentos , Leche , Penicilinas , Leche/química , Aptámeros de Nucleótidos/química , Animales , Antibacterianos/análisis , Antibacterianos/química , Penicilinas/análisis , Penicilinas/química , Contaminación de Alimentos/análisis , Límite de Detección , Residuos de Medicamentos/análisis , Residuos de Medicamentos/química , BovinosRESUMEN
To address the growing challenge of counterfeit prevention, this study developed a novel anti-counterfeiting ink system based on bacterial cellulose nanocrystals (BCNC) and lanthanide (Er, Yb)nitrogen (N) co-dropped graphene quantum dots (GQDs), which exhibited both photoluminescence (PL) and upconversion photoluminescence (UCPL) fluorescent properties as well as excellent rheological characteristics. The Er/Yb/N-GQDs with positive charges were synthesized by a one-step hydrothermal method and subsequently assembled with negatively charged BCNC through electrostatic self-assembly to fabricate a novel nanohybrid, Er/Yb/N-GQDs-BCNC. Raman spectroscopy results indicated an enhancement in the graphitization of GQDs due to lanthanide modification. The TEM results demonstrated a homogeneous distribution of Er/Yb/N-GQDs on BCNC, while XRD, FTIR, and XPS analyses confirmed their physical binding, thus validating the successful synthesis of novel nanohybrids. Then, Er/Yb/N-GQDs-BCNC was introduced into PVA waterborne ink and exhibited dual anti-counterfeiting properties by emitting blue fluorescence at Em 440 nm under Ex 370 nm and green fluorescence at Em 550 nm under Ex 980 nm. Furthermore, the incorporation of BCNC significantly enhanced the thixotropic behavior and yield stress of the PVA waterborne ink. This enhancement made the dual anti-counterfeiting fluorescent ink more suitable for diversified applications on different devices and various substrates, thus providing a novel approach for convenient and rapid information encryption and high security anti-counterfeiting.
Asunto(s)
Celulosa , Grafito , Tinta , Elementos de la Serie de los Lantanoides , Nanopartículas , Nitrógeno , Puntos Cuánticos , Celulosa/química , Nanopartículas/química , Puntos Cuánticos/química , Nitrógeno/química , Grafito/química , Elementos de la Serie de los Lantanoides/química , Agua/química , Luminiscencia , BacteriasRESUMEN
The work was based on N-(4-Aminobutyl)-N-ethylisoluminol (ABEI)-functionalized Fe-MIL-101 and gold nanoparticles (AuNPs) as sensing materials, and an electrochemiluminescence (ECL) aptasensor was constructed for detecting acetamiprid. As a metal-organic framework (MOF) material, Fe-MIL-101, was renowned for its unique three-dimensional network structure and efficient catalytic capability. ABEI, a common ECL reagent, was widely applied. ABEI was introduced into the Fe-MIL-101 structure as a luminescence functionalization reagent to form Fe-MIL-101@ABEI. This approach avoided limitations on the loading capacity of luminescent reagents imposed by modification and encapsulation methods. With character of excellent catalytic activity and ease of bioconjugation, AuNPs offered significant advantages in biosensing. Leveraging the reductive properties of ABEI, AuNPs were reduced around Fe-MIL-101@ABEI, resulting in the modified luminescent functionalized material denoted as Fe-MIL-101@ABEI@AuNPs. An aptamer was employed as a recognition element and was modified accordingly. The aptamer was immobilized on Fe-MIL-101@ABEI@AuNPs through gold-sulfur (Au-S) bonds. After capturing acetamiprid, the aptamer induced a decrease in the ECL signal intensity within the ABEI-hydrogen peroxide (H2O2) system, enabling the quantitative detection of acetamiprid. The aptasensor displayed remarkable stability and repeatability, featured a detection range of 1×10-3-1×102 nM, and had a limit of detection (LOD) of 0.3 pM (S/N=3), which underscored its substantial practical application potential.
Asunto(s)
Aptámeros de Nucleótidos , Técnicas Biosensibles , Técnicas Electroquímicas , Oro , Límite de Detección , Mediciones Luminiscentes , Nanopartículas del Metal , Estructuras Metalorgánicas , Neonicotinoides , Neonicotinoides/análisis , Neonicotinoides/química , Estructuras Metalorgánicas/química , Técnicas Biosensibles/métodos , Nanopartículas del Metal/química , Oro/química , Aptámeros de Nucleótidos/química , Mediciones Luminiscentes/métodos , Técnicas Electroquímicas/métodos , Verduras/química , Luminol/química , Luminol/análogos & derivados , Residuos de Plaguicidas/análisis , Residuos de Plaguicidas/aislamiento & purificación , Contaminación de Alimentos/análisisRESUMEN
Aptamers have superior structural properties and have been widely used in bacterial detection methods. However, the problem of low affinity still exists in complex sample detection. In contrast, hybridization chain reaction (HCR)-based model I and rolling circle amplification (RCA)-based model II multivalent activatable aptamers (multi-Apts) can fulfill the need for low-cost, rapid, highly sensitive and high affinity detection of S. typhimurium. In our research, two models of multi-Apts were designed. First, a monovalent activatable aptamer (mono-Apt) was constructed by fluorescence resonance energy transfer (FRET) with an S. typhimurium aptamer and its complementary chain of BHQ1. Next, the DNA scaffold was obtained by HCR and RCA, and the multi-Apts were obtained by self-assembly of the mono-Apt with a DNA scaffold. In model I, when target was presented, the complementary chain BHQ1 was released due to the binding of multi-Apts to the target and was subsequently adsorbed by UIO66. Finally, a FRET-based fluorescence detection signal was obtained. In mode II, the multi-Apts bound to the target, and the complementary chain BHQ1 was released to become the trigger chain for the next round of amplification of HCR with a fluorescence detection signal. HCR and RCA based multi-Apts were able to detect S. typhimurium as low as 2 CFU mL-1 and 1 CFU mL-1 respectively. Multi-Apts amplification strategy provides a new method for early diagnosis of pathogenic microorganisms in foods.
Asunto(s)
Aptámeros de Nucleótidos , Transferencia Resonante de Energía de Fluorescencia , Técnicas de Amplificación de Ácido Nucleico , Salmonella typhimurium , Salmonella typhimurium/aislamiento & purificación , Salmonella typhimurium/genética , Aptámeros de Nucleótidos/química , Transferencia Resonante de Energía de Fluorescencia/métodos , Técnicas de Amplificación de Ácido Nucleico/métodos , Hibridación de Ácido Nucleico , Técnicas Biosensibles/métodos , Límite de DetecciónRESUMEN
Successful construction of a detection method for Salmonella typhimurium (S. typhimurium) based on the synergy of hybridization chain reaction (HCR) and fluorescence was realized in this paper. First, the aptamer modified with the quenching group Black Hole Quencher-1 acid (BHQ1) was immobilized on the magnetic beads in combination with the complementary chain of the aptamer modified with 6-carboxyfluorescein (6-FAM). Second, S. typhimurium and cDNA-6-FAM immobilized on magnetic beads competitively bound to the aptamer. Finally, the cDNA-6-FAM was released after magnetic separation acted as a promoter to trigger HCR amplification when the target presented. The fluorescence signal could be significantly improved by the combination of green SYBR Green I (SGI) and HCR long double-stranded DNA and the fluorescent synergy of 6-FAM and SGI. Because of the separation of target and its aptamer, the trigger strand was abstracted by magnetic separation. There was no HCR to generate long double-stranded DNA, and the fluorescence of excess hairpin/SGI could be adsorbed through UIO66 so that only a very low background signal was detected. This fluorescent sensor was capable of monitoring S. typhimurium in the range of 10-3.2 × 107 CFU mL-1 with a limit of detection as low as 1.5 CFU mL-1. Because of the excellent properties of the aptasensor and the validity of SGI fluorescence synergy, this HCR enzyme-free amplification strategy could be generalized to other areas.
Asunto(s)
Aptámeros de Nucleótidos , Salmonella typhimurium , Salmonella typhimurium/aislamiento & purificación , Aptámeros de Nucleótidos/química , Fluorescencia , Límite de Detección , Colorantes Fluorescentes/química , Técnicas Biosensibles/métodos , Espectrometría de Fluorescencia/métodos , Hibridación de Ácido Nucleico , Fluoresceínas/química , Estructuras Metalorgánicas/químicaRESUMEN
In this work, a simple synthesis of low-toxicity transition metal material of WO3-x dots was used as a co-reactant with Au@SiO2 as a core-shell material and a signal amplification factor to collaboratively promote Ru(bpy)32+ electrochemiluminescence (ECL) for the construction of a highly sensitive aptasensor for the detection of diazinon (DZN) in vegetables. Electrodes modified with multi-walled carbon nanotubes-chitosan composite membranes (MWCNTs-CS) were used to load and immobilize more Ru(bpy)32+.can load more Ru(bpy)32+. WO3-x dots synthesized by a simple method showed excellent ECL efficiency as a novel co-reactant for Ru(bpy)32+. Under optimized conditions, this aptasensor for DZN has a wide detection range (10 pg mL-1 - 1 µg mL-1.) and a low detection limit (0.0197 ng L-1). The aptasensor has shown good results in the analysis of real samples in the experiment. This work provides a new approach to the construction of a novel electrochemiluminescence sensor for the detection of pesticides.
Asunto(s)
Técnicas Biosensibles , Nanopartículas del Metal , Nanocápsulas , Nanotubos de Carbono , Diazinón , Dióxido de Silicio , Verduras , Mediciones Luminiscentes/métodos , Oro , Técnicas Biosensibles/métodos , Técnicas Electroquímicas/métodosRESUMEN
In this work, a novel ternary nanocomposite of PEI/RuSi-MWCNTs was designed and synthesized for the first time, which an ultrasensitive and self-enhanced electrochemiluminescent (ECL) aptasensor was developed for the detection of profenofos residues in vegetables. The self-enhanced complex PEI-Ru (II) enhanced the emission and stability of ECL, and the multi-walled carbon nanotubes (MWCNTs) acted as an excellent carrier and signal amplification. The PEI/RuSi-MWCNTs were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM) and energy dispersive spectrometer (EDS). The incorporation of gold nanoparticles (AuNPs) improved the performance of the sensor and provided a platform for the immobilization of the aptamer. The results of the experiment showed that the presence of profenofos significantly suppressed the electrochemiluminescence intensity of the sensor. The detection sensitivity of the aptamer sensor was in the range of 1 × 10-2 to 1 × 103 ng/mL. Under optimal conditions, the limit of detection (LOD) of the sensor for profenofos was 1.482 × 10-3 ng/mL. The sensor had excellent stability, reproducibility and specificity. The recoveries of the sensor ranged from 92.29 % to 106.47 % in real sample tests.
RESUMEN
Trimethylamine (TMA), Dimethylamine (DMA), Ammonia (NH3) and formaldehyde (HCHO) are typical volatile gases and able to cause great damage to the environment and the human body, and they may appear along in some particular cases such as marine meat spoilage. However, gas sensors can detect all the 4 hazardous gases simultaneously have rarely been reported. In this study, a quartz crystal microbalance (QCM) gas sensor modified with La-Ce-MOF was employed for the detection of 4 target gases (TMA, DMA, NH3 and HCHO). The sensor exhibited excellent stability (63 days), selectivity (3.51 Hz/(µmoL/L) for TMA, 4.19 Hz/(µmoL/L) for DMA, 3.14·Hz/(µmoL/L) for NH3 and 3.08·Hz/(µmoL/L) for HCHO), robustness and sensitivity towards target gases detection. Vienna Ab-initio Simulation Package calculations showed that this superior sensing performance was attributed to the preferential adsorption of target gas molecules onto the nanomicrospheres via hydrogen bond. The adsorption energy was - 0.4329 eV for TMA, - 0.5204 eV for DMA, - 0.6823 eV for NH3 and - 0.7576 eV for HCHO, all of which are physically adsorbed. In the detection of hazardous gases, sensor surface active sites were often susceptible to environmental factors and interfering substances, leading to a decrease in the sensitivity of the gas sensor, which in turn affects the signal accuracy in practical applications. This issue has been effectively addressed and the sensor has been implemented for the assessment of the salmon meat freshness, which may contribute to further advancements in the development of QCM gas sensors for monitoring food quality, human beings health and environment safety.
RESUMEN
The excessive content of lead (Pb(II)) and Staphylococcus aureus (S.aureus) seriously harms the quality of aquatic products. In this paper, a highly sensitive electrochemiluminescence (ECL) biosensor was constructed using the synergistic effect of Au NPs@Nickel-Cobalt-Metal-organic frameworks (Au@Ni-Co-MOFs) and double potential resolution function of urchin-like Au@luminol and Cadmium sulfide quantum dots (CdS QDs) for synchronous detection of Pb(II) and S.aureus in aquatic products. Au@Ni-Co-MOFs as the base material, its cube structure can improve the surface active area and sensitivity of the sensor, providing more catalytic active sites for the two functional probes. Urchin-like Au@luminol binding aptamer DNA2 specifically recognizes Pb(II), CdS QDs binding aptamer DNA3 specifically recognizes S.aureus, which collaboratively catalyzed hydrogen peroxide reduction to produce two electrochemiluminescence signals. The shared hairpin structure DNA1 binds stably to Au@Ni-Co-MOFs via the Au-S bond, and the two functional probes are complementary paired with the DNA1 respectively to ensure the specificity of the aptamer. According to the ECL intensity changes of different potentials signal sources, the synchronous detection of Pb(II) and S.aureus with different concentrations is realized. The sensor realizes the detection of two targets in aquatic products and provides a new strategy for the simultaneous detection of multiple targets.
Asunto(s)
Técnicas Biosensibles , Compuestos de Cadmio , Nanopartículas del Metal , Estructuras Metalorgánicas , Puntos Cuánticos , Sulfuros , Estructuras Metalorgánicas/química , Luminol/química , Plomo , Staphylococcus aureus , Límite de Detección , Nanopartículas del Metal/química , Oro/química , Mediciones Luminiscentes , Puntos Cuánticos/química , Oligonucleótidos , Técnicas ElectroquímicasRESUMEN
Pathogenic bacteria are primarily kinds of food hazards that provoke serious harm to human health via contaminated or spoiled food. Given that pathogenic bacteria continue to reproduce and expand once they contaminate food, pathogenic bacteria of high concentration triggers more serious losses and detriments. Hence, it is essential to detect low-dose pollution at an early stage with high sensitivity. Aptamers, also known as "chemical antibodies", are oligonucleotide sequences that have attracted much attention owing to their merits of non-toxicity, small size, variable structure as well as easy modification of functional group. Aptamer-based bioanalysis has occupied a critical position in the field of rapid detection of pathogenic bacteria. This is attributed to the unique advantage of using aptamers as recognition elements in signal amplification strategies. The signal amplification strategy is an effective means to improve the detection sensitivity. Some diverse signal amplification strategies emphasize the synthesis and assembly of nanomaterials with signal amplification capabilities, while others introduce various nucleic acid amplification techniques into the detection system. This review focuses on a variety of signal amplification strategies employed in aptamer-based detection approaches to pathogenic bacteria. Meanwhile, we provided a detailed introduction to the design principles and characteristics of signal amplification strategies, as well as the improvement of sensor sensitivity. Ultimately, the existing issues and development trends of applying signal amplification strategies in apta-sensing analysis of pathogenic bacteria are critically proposed and prospected. Overall, this review discusses from a new perspective and is expected to contribute to the further development of this field.
Asunto(s)
Anticuerpos , Nanoestructuras , Humanos , Bacterias/genética , Contaminación Ambiental , Técnicas de Amplificación de Ácido Nucleico , OligonucleótidosRESUMEN
Acetamiprid (ACE) is a highly effective broad-spectrum insecticide, and its widespread use is potentially harmful to human health and environmental safety. In this study, magnetic Fe3O4/carbon (Fe3O4/C), a derivative of metal-organic framework MIL-101 (Fe), was synthesized by a two-step calcination method. And a fluorescent sensing strategy was developed for the efficient and sensitive detection of ACE using Fe3O4/C and multiple complementary single-stranded DNA (ssDNA). By using aptamer with multiple complementary ssDNA, the immunity of interference of the aptasensor was improved, and the aptasensor showed high selectivity and sensitivity. When ACE was present, the aptamer (Apt) combined with ACE. The complementary strand of Apt (Cs1) combined with two short complementary strands of Cs1, fluorophore 6-carboxyfluorescein-labeled complementary strand (Cs2-FAM) and the other strand Cs3. The three strands formed a double-stranded structure, and fluorescence would not be quenched by Fe3O4/C. In the absence of ACE, Cs2-FAM would be in a single-chain state and would be adsorbed by Fe3O4/C, and the fluorescence of FAM would be quenched by Fe3O4/C via photoelectron transfer. This aptasensor sensitively detected ACE over a linear concentration range of 10-1000 nM with a limit of detection of 3.41 nM. The recoveries of ACE spiked in cabbage and celery samples ranged from 89.49% to 110.76% with high accuracy.