RESUMEN
The instrument grading assessment portion of the National Beef Quality Audit (NBQA) - 2016 allows the unique opportunity to evaluate beef carcass traits over the course of a year. One week of instrument grading data was collected each month from 5 beef processing corporations encompassing 18 facilities from January 2016 through December 2016 ( = 4,544,635 carcasses). Mean USDA yield grade (YG) was 3.1 with 1.37 cm fat thickness (FT), 88.9 cm LM area, 393.6 kg HCW, and 2.1% KPH. Frequency distribution of USDA YG was 9.5% YG 1, 34.6% YG 2, 38.8% YG 3, 14.6% YG 4, and 2.5% YG 5. Increases in HCW and FT since the NBQA-2011 were major contributors to differences in mean YG and the (numerically) increased frequency of YG 3, 4, and 5 carcasses found in the current audit. Mean marbling score was Small, and the distribution of USDA quality grades was 4.2% Prime, 71.4% Choice, 21.7% Select, and 2.7% other. Frequency of carcasses grading Prime on Monday (6.43%) was numerically higher than the average frequency of carcasses grading Prime overall (4.2%). Monthly HCW means were 397.6 kg in January, 397.2 kg in February, 396.5 kg in March, 389.3 kg in April, 384.8 kg in May, 385.0 kg in June, 386.1 kg in July, 394.1 kg in August, 399.1 kg in September, 403.9 kg in October, 406.5 kg in November, and 401.9 kg in December. Monthly mean marbling scores were Small in January, Small in February, Small in March, Small in April, Small in May, Small in June, Small in July, Small in August, Small in September, Small in October, Small in November, and Small in December. Both mean HCW and mean marbling score declined in the months of May and June. The month with the greatest numerical frequency of dark cutters was October (0.74%). Comparison of overall data from in-plant carcass and instrument grading assessments revealed close alignment of information, especially for YG (3.1 for in-plant assessment versus 3.1 for instrument grading) and marbling (Small for in-plant assessment versus Small for instrument grading). These findings allow the beef industry access to the greatest volume of beef value-determining characteristics for the U.S. fed steer and heifer population than ever reported, resulting in potentially more precise targeting of future quality and consistency efforts.
Asunto(s)
Bovinos/fisiología , Carne Roja/normas , Animales , Composición Corporal , Bovinos/crecimiento & desarrollo , Femenino , Masculino , Encuestas y Cuestionarios , Estados UnidosRESUMEN
The National Beef Quality Audit (NBQA)-2016 used in-plant cooler assessments to benchmark the current status of the fed steer and heifer beef industry in the United States. In-plant cooler assessments ( = 9,106 carcasses) were conducted at 30 facilities, where approximately 10% of a single day's production were evaluated for USDA quality grade (QG) and yield grade (YG) factors. Frequencies of evaluated traits were 66.5% steer and 33.4% heifer sex classes and 82.9% native, 15.9% dairy-type, and 1.2% estimated breed types. Mean USDA YG factors were 1.42 cm for adjusted fat thickness, 89.5 cm for LM area, 390.3 kg for HCW, and 1.9% for KPH. Mean USDA YG was 3.1, with a frequency distribution of 9.6% YG 1, 36.7% YG 2, 39.2% YG 3, 12.0% YG 4, and 2.5% YG 5. Mean USDA QG traits were Small for marbling score, A for overall maturity, A55 for lean maturity, and A for skeletal maturity. Mean USDA QG was Select with a frequency distribution of QG of 3.8% Prime, 67.3% Choice, 23.2% Select, and 5.6% lower score. Lower score included dark cutter (1.9%), blood splash (0.1%), and hard bone, which are USDA overall maturity scores of C or older (1.8%). Marbling score distributions were 0.85% Slightly Abundant or greater, 7.63% Moderate, 23.54% Modest, 39.63% Small, 23.62% Slight, and 0.83% Traces or less. Carcasses that were Choice or Select and USDA YG 2 or 3 accounted for 70.7% of the carcasses evaluated. Compared with the previous NBQA, we found a numerical increase in mean USDA YG, USDA QG, adjusted fat thickness, HCW, LM area, and marbling score with an increase in dairy-type carcasses and percentage of carcasses grading USDA Prime and Choice as well as frequency of USDA YG 4 and 5. The findings from this study will be used by all segments of the industry to understand and improve the quality of fed steer and heifer beef that is being produced.
Asunto(s)
Bovinos/fisiología , Carne Roja/normas , Animales , Composición Corporal , Cruzamiento , Bovinos/crecimiento & desarrollo , Femenino , Masculino , Encuestas y Cuestionarios , Estados UnidosRESUMEN
The National Beef Quality Audit-2016 (NBQA-2016) was conducted to assess current transportation, mobility, and quality characteristics of U.S. fed steers and heifers. Data were collected at 17 beef processing facilities between March and November 2016. About 8,000 live cattle were evaluated for transportation and mobility, and about 25,000 carcasses were evaluated on the slaughter floor. Cattle were in transit to the slaughter facility for a mean duration of 2.7 h from a mean distance of 218.5 km using trailers with dimensions ranging from 17.84 m2 to 59.09 m2. Area allotted per animal averaged 1.13 m2 and ranged from 0.85 m2 to 2.28 m2. A total of 96.8% of cattle received a mobility score of 1 (walks easily, no apparent lameness). Identification types (35.1% had multiple) were lot visual tags (61.5%), individual tags (55.0%), electronic tags (16.9%), metal-clip tags (9.2%), bar-coded tags (0.05%), wattles (0.01%), and other (2.6%). Cattle were black-hided (57.8%), Holstein (20.4%), red-hided (10.5%), yellow-hided (4.8%), gray-hided (2.9%), brown-hided (1.3%), and white-hided (1.1%). Unbranded hides were observed on 74.3% of cattle; 18.6% had brands located on the butt, 6.3% on the side, and 1.3% on the shoulder (values exceed 100% due to multiple brands). For hide-on carcasses, 37.7% displayed no mud or manure; specific locations for mud or manure were legs (40.8%), belly (33.0%), tail region (15.5%), side (6.8%), and top-line (3.9%). Cattle without horns represented 83.3% of the sample, and cattle that did have horns measured: < 2.54 cm (5.5%), 2.54 to 12.7 cm (8.3%), and > 12.7 cm (2.9%). Carcasses without bruises represented 61.1% of those sampled, whereas 28.2% had 1, 8.2% had 2, 2.1% had 3, and 0.3% had 4 bruises. Of those carcasses with a bruise, the bruise was located on the loin (29.7%), round (27.8%), chuck (16.4%), rib (14.4%), and brisket/plate/flank (11.6%). Frequencies of offal condemnations were livers (30.8%), lungs (18.2%), viscera (16.3%), hearts (11.1%), heads (2.7%), and tongues (2.0%). Compared to NBQA-2011, fewer cattle were identified for traceability, fewer were black-hided, a greater number were Holstein cattle, more with no brand and no horns, fewer without bruises, more liver, lung, and viscera condemnations, and fewer heads and tongues were condemned. The NBQA remains an influential survey for the U.S. beef industry to provide benchmarks and strategic plans for continued improvement of beef quality and consistency.
RESUMEN
The National Beef Quality Audit (NBQA) is conducted every 5 yr and was most recently again conducted in 2016. Face-to-face interviews gauged progress in quality associated with live cattle production using procedures first utilized in NBQA 2011. The 2016 NBQA was the first in which interviews concerning fed steers and heifers were combined with an audit of market cow and bull beef. Face-to-face interviews were designed to illicit definitions for beef quality, estimate willingness to pay (WTP) for quality attributes, establish relative importance rankings for important quality factors, and assess images, strengths, weaknesses, potential threats, and shifting trends in the beef industry since the 2011 audit. Individuals making purchasing decisions in 5 market sectors of the steer/heifer and cow/bull beef supply chain were interviewed, including packers (n = 36), retailers (including large and small supermarket companies and warehouse food sales companies; n = 35), food service operators (including quick-serve, full-service, and institutional establishments; n = 29), further processors (n = 64), and peripherally-related government and trade organizations (GTO; n = 30). Face-to-face interviews were conducted between January and November of 2016 using a designed dynamic routing system. Definitions (as described by interviewees) for 7 pre-determined quality factors, including: (1) How and where the cattle were raised, (2) Lean, fat, and bone, (3) Weight and size, (4) Visual characteristics, (5) Food safety, (6) Eating satisfaction, and (7) Cattle genetics were recorded verbatim and categorized into similar responses for analysis. Compared to NBQA-2011, a higher percentage of companies were willing to pay premiums for guaranteed quality attributes, but overall were willing to pay lower average premiums than the companies interviewed in 2011. Food safety had the highest share of preference among all interviewees, generating a double-digit advantage over any other quality factor. The 2 beef industries have an overall positive image among interviewees, and despite lingering weaknesses, product quality continued to be at the forefront of the strengths category for both steer and heifer beef and market cow and bull beef.
RESUMEN
The National Beef Quality Audit-2016 marks the fourth iteration in a series assessing the quality of live beef and dairy cows and bulls and their carcass counterparts. The objective was to determine the incidence of producer-related defects, and report cattle and carcass traits associated with producer management. Conducted from March through December of 2016, trailers (n = 154), live animals (n = 5,470), hide-on carcasses (n = 5,278), and hide-off hot carcasses (n = 5,510) were surveyed in 18 commercial packing facilities throughout the United States. Cattle were allowed 2.3 m2 of trailer space on average during transit indicating some haulers are adhering to industry handling guidelines for trailer space requirements. Of the mixed gender loads arriving at processing facilities, cows and bulls were not segregated on 64.4% of the trailers surveyed. When assessed for mobility, the greatest majority of cattle surveyed were sound. Since the inception of the quality audit series, beef cows have shown substantial improvements in muscle. Today over 90.0% of dairy cows are too light muscled. The mean body condition score for beef animals was 4.7 and for dairy cows and bulls was 2.6 and 3.3, respectively. Dairy cattle were lighter muscled, yet fatter than the dairy cattle surveyed in 2007. Of cattle surveyed, most did not have horns, nor any visible live animal defects. Unbranded hides were observed on 77.3% of cattle. Carcass bruising was seen on 64.1% of cow carcasses and 42.9% of bull carcasses. However, over half of all bruises were identified to only be minor in severity. Nearly all cattle (98.4%) were free of visible injection-site lesions. Current results suggest improvements have been made in cattle and meat quality in the cow and bull sector. Furthermore, the results provide guidance for continued educational and research efforts for improving market cow and bull beef quality.
RESUMEN
Cancer of the eye in cattle with white faces occurs less frequently in cattle with pigmented eyelids. Corneoscleral pigmentation is related to eyelid pigmentation and occurrence of lesions that may precede cancer. Objectives of this study were to assess 1) variation in the proportion of eyelid and corneoscleral pigmentation in Hereford, Bos taurus, and Bos indicus crossbreds and 2) the occurrence of lesions with the presence of pigmentation in those areas. Hereford and Bos indicus crosses (Brahman or Nellore with Angus and Hereford and straightbred Brafords) and Bos taurus crosses (Angus-Hereford) were included in the study (n = 1,083). Eyelid pigmentation proportions were estimated by pixel quantification and were evaluated as total proportions and for upper and lower eyelids distinctly for each eye. Fixed effects included breed type, age categories, and sex of the animal. Lesion presence (1) or absence (0) was obtained by visual appraisal of image and was assumed to be binomially distributed. Eyelid pigmentation proportions (overall, upper, and lower eyelids) for Hereford ranged from 0.65 ± 0.03 to 0.68 ± 0.03 and were significantly lower than Bos indicus (range from 0.93 ± 0.02 to 0.95 ± 0.02) or Bos taurus (ranged from 0.88 ± 0.02 to 0.92 ± 0.02) crosses. Corneoscleral pigmentation in Hereford cows (0.17 ± 0.06) did not differ (P = 0.91) from Hereford calves and yearlings (0.16 ± 0.07). Bos indicus and Bos taurus crossbred cows had larger corneoscleral pigmentation (0.38 ± 0.05 and 0.48 ± 0.04 for left eyes and 0.37 ± 0.05 and 0.53 ± 0.04 for right eyes, respectively) than all calves (P < 0.001), and their corneoscleral pigmentations were greater than that of Hereford cows (P < 0.003). Bos indicus and Bos taurus cows had greater proportions of left eye corneoscleral pigmentation (0.38 ± 0.05 and 0.48 ± 0.04, respectively) than Hereford cows (0.17 ± 0.06) and all young animal breed types (P < 0.05). Right eye proportions differed for all cow groups (P < 0.05; 0.53 ± 0.04, 0.37 ± 0.05, and 0.17 ± 0.06). Among calves and yearlings, Hereford had a lower right eye corneoscleral pigmentation proportion (0.16 ± 0.07) than Bos taurus (P = 0.02). The lesion proportion for Hereford (0.08 ± 0.03) was significantly greater than that of either Bos indicus (0.01 ± 0.005) or Bos taurus (0.01 ± 0.003). Crossbreeding with Bos taurus or Bos indicus animals appears to increase eye pigmentation, which may help reduce the occurrence of cancer in eyes of cattle with white faces.
Asunto(s)
Córnea/fisiología , Pigmentos Biológicos/metabolismo , Esclerótica/fisiología , Pigmentación de la Piel/fisiología , Animales , Bovinos , Cruzamientos Genéticos , Párpados/fisiología , Femenino , MasculinoRESUMEN
This survey consisted of data collected from 23 beef harvest plants to document transportation procedures, management practices, and health assessments of market beef and dairy cows and bulls (about n â 7,000 animals). Gooseneck/bumper-pulled trailers were used more often to transport dairy cattle than beef cattle to market whereas tractor-trailers were used more often to transport beef cattle than dairy cattle. All loads (n = 103) met the American Meat Institute Foundation guidelines for spacing. Loads where more than 3% of the cattle slipped during unloading were observed in 27.3% of beef loads and 29.0% of the dairy loads. Beef loads had numerically greater usage of electrical prods (32.4%) versus dairy loads (15.4%) during unloading and were more likely to have a variety of driving aids used more aggressively on them. Fewer cattle had horns, brands, and mud/manure contamination on hides than in the previous survey in 1999. The predominant hide color for beef cows was black (44.2%) whereas the predominant color for dairy cows was the Holstein pattern (92.9%). Fewer cattle displayed evidence of bovine ocular neoplasia (2.9%) than in previous surveys in 1994 (8.5%) and 1999 (4.3%). Knots on live cattle were found less in the round (0.5%) and more in the shoulder region (4.6%) than in 1999 (1.4% and 0.4%, respectively). Dairy cows were more frequently lame in 2007 (48.7%) than 1999 (39.2%) whereas beef cows had numerically less lameness (16.3% vs. 26.6%, respectively). Most beef cows (62.3%) and dairy cows (68.9%) received midpoint body condition scores (3, 4, and 5 for beef; 2 and 3 for dairy). Beef cows had higher numerical percentages of no defects present (72.0%) versus dairy cows (63.0%) when evaluated for a variety of reproductive, health, or management conditions. Continued improvements in several key factors related to transportation, management, and health were observed in this survey, which could result in increased value in market beef and dairy cows and bulls.
Asunto(s)
Crianza de Animales Domésticos , Bienestar del Animal , Bovinos/fisiología , Industria Lechera , Transportes/normas , Animales , Femenino , Masculino , Estados UnidosRESUMEN
The National Beef Quality Audit (NBQA)-2011 benchmarked the current status of and assessed progress being made toward quality and consistency of U.S. cattle, carcasses, and beef products after the completion of the first NBQA in 1991. Unlike previous NBQA, objectives of the 2011 Phase I study were to determine how each beef market sector defined 7 quality categories, estimate willingness-to-pay (WTP) for the same quality categories by market sector, and establish a best-worst (B/W) scaling for the quality categories. Structured face-to-face interviews were conducted and responses were recorded using dynamic routing software over an 11-mo period (February to December 2011) with decision makers in each of the following beef market sectors: Feeders (n = 59), Packers (n = 26), Food Service, Distribution, and Further Processors (n = 48), Retailers (n = 30), and Government and Allied Industries (n = 47). All respondents participated in a structured interview consisting of WTP and B/W questions that were tied to 7 quality categories and then were asked to "define" each of the 7 categories in terms of what the category meant to them, resulting in completely unbiased results. The 7 quality categories were a) how and where the cattle were raised, b) lean, fat, and bone, c) weight and size, d) cattle genetics, e) visual characteristics, f) food safety, and g) eating satisfaction. Overall, "food safety" and "eating satisfaction" were the categories of greatest and second most importance, respectively, to all beef market sectors except for Feeders. Feeders ranked "how and where the cattle were raised" and "weight and size" as the most important and second most important, respectively. Overall, "how and where the cattle were raised" had the greatest odds of being considered a nonnegotiable requirement before the raw material for each sector would be considered for purchase and was statistically more important (P < 0.05) as a requirement for purchase than all other categories except "food safety." When all market sectors were considered, "eating satisfaction" was shown to generate the greatest average WTP percentage premium (11.1%), but that WTP premium value only differed statistically (P < 0.05) from "weight and size" (8.8%). Most notably, when a sector said that "food safety" was a nonnegotiable requirement, no sector was willing to purchase the product at a discounted price if the "food safety" of the product could not be assured.
Asunto(s)
Industria para Empaquetado de Carne/normas , Carne/normas , Crianza de Animales Domésticos/economía , Crianza de Animales Domésticos/normas , Animales , Bovinos , Calidad de los Alimentos , Industria de Procesamiento de Alimentos/economía , Industria de Procesamiento de Alimentos/normas , Mercadotecnía/normas , Carne/economía , Industria para Empaquetado de Carne/economía , Estados UnidosRESUMEN
The tenderness and palatability of retail and food service beef steaks from across the United States (12 cities for retail, 5 cities for food service) were evaluated using Warner-Bratzler shear (WBS) and consumer sensory panels. Subprimal postfabrication storage or aging times at retail establishments averaged 20.5 d with a range of 1 to 358 d, whereas postfabrication times at the food service level revealed an average time of 28.1 d with a range of 9 to 67 d. Approximately 64% of retail steaks were labeled with a packer/processor or store brand. For retail, top blade had among the lowest (P < 0.05) WBS values, whereas steaks from the round had the greatest (P < 0.05) values. There were no differences (P > 0.05) in WBS values between moist-heat and dry-heat cookery methods for the top round and bottom round steaks or between enhanced (contained salt or phosphate solution) or nonenhanced steaks. Food service top loin and rib eye steaks had the lowest (P < 0.05) WBS values compared with top sirloin steaks. Retail top blade steaks and food service top loin steaks received among the greatest (P < 0.05) consumer sensory panel ratings compared with the other steaks evaluated. Prime food service rib eye steaks received the greatest ratings (P < 0.05) for overall like, like tenderness, tenderness level, like juiciness, and juiciness level, whereas ungraded rib eye steaks received the lowest ratings (P < 0.05) for like tenderness and tenderness level. The WBS values for food service steaks were greater (P < 0.05) for the Select and ungraded groups compared with the Prime, Top Choice, and Low Choice groups. The WBS values and sensory ratings were comparable to the last survey, signifying that no recent or substantive changes in tenderness have occurred.
Asunto(s)
Culinaria/métodos , Servicios de Alimentación , Carne/normas , Animales , Bovinos , Comportamiento del Consumidor , Servicios de Alimentación/economía , Factores de Tiempo , Estados UnidosRESUMEN
The instrument grading assessments for the 2011 National Beef Quality Audit evaluated seasonal trends of beef carcass quality and yield attributes over the course of the year. One week of instrument grading data, HCW, gender, USDA quality grade (QG), and yield grade (YG) factors, were collected every other month (n = 2,427,074 carcasses) over a 13-mo period (November 2010 through November 2011) from 4 beef processing corporations, encompassing 17 federally inspected beef processing facilities, to create a "snapshot" of carcass quality and yield attributes and trends from carcasses representing approximately 8.5% of the U.S. fed steer and heifer population. Mean yield traits were YG (2.86), HCW (371.3 kg), fat thickness (1.19 cm.), and LM area (88.39 cm(2)). The YG distribution was YG 1, 15.7%; YG 2, 41.0%; YG 3, 33.8%; YG 4, 8.5%; and YG 5, 0.9%. Distribution of HCW was <272.2 kg, 1.6%; 272.2 to 453.6 kg, 95.1%; and ≥453.6 kg, 3.3%. Monthly HCW means were November 2010, 381.3 kg; January 2011, 375.9 kg; March 2011, 366.2 kg; May 2011, 357.9 kg; July 2011, 372.54 kg; September 2011, 376.1 kg; and November 2011, 373.5 kg. The mean fat thickness for each month was November 2010, 1.30 cm; January 2011, 1.22 cm; March 2011, 1.17 cm; May 2011, 1.12 cm; July 2011, 1.19 cm; September 2011, 1.22 cm; and November 2011, 1.22 cm. The overall average marbling score was Small(49). The USDA QG distribution was Prime, 2.7%; Top Choice, 22.9%; Commodity Choice, 38.6%; and Select, 31.5%. Interestingly, from November to May, seasonal decreases (P < 0.001) in HCW and fat thicknesses were accompanied by increases (P < 0.001) in marbling. These data present the opportunity to further investigate the entire array of factors that determine the value of beef. Data sets using the online collection of electronic data will likely be more commonly used when evaluating the U.S. fed steer and heifer population in future studies.
Asunto(s)
Bovinos/fisiología , Industria para Empaquetado de Carne/normas , Carne/normas , Tejido Adiposo/anatomía & histología , Análisis de Varianza , Animales , Composición Corporal , Bovinos/anatomía & histología , Femenino , Análisis de los Mínimos Cuadrados , Masculino , Industria para Empaquetado de Carne/instrumentación , Estaciones del Año , Estados UnidosRESUMEN
The 2011 National Beef Quality Audit (NBQA-2011) assessed the current status of quality and consistency of fed steers and heifers. Beef carcasses (n = 9,802), representing approximately 10% of each production lot in 28 beef processing facilities, were selected randomly for the survey. Carcass evaluation for the cooler assessment of this study revealed the following traits and frequencies: sex classes of steer (63.5%), heifer (36.4%), cow (0.1%), and bullock (0.03%); dark cutters (3.2%); blood splash (0.3%); yellow fat (0.1%); calloused rib eye (0.05%); overall maturities of A (92.8%), B (6.0%), and C or greater (1.2%); estimated breed types of native (88.3%), dairy type (9.9%), and Bos indicus (1.8%); and country of origin of United States (97.7%), Mexico (1.8%), and Canada (0.5%). Certified or marketing program frequencies were age and source verified (10.7%), ≤A(40) (10.0%), Certified Angus Beef (9.3%), Top Choice (4.1%), natural (0.6%), and Non-Hormone-Treated Cattle (0.5%); no organic programs were observed. Mean USDA yield grade (YG) traits were USDA YG (2.9), HCW (374.0 kg), adjusted fat thickness (1.3 cm), LM area (88.8 cm2), and KPH (2.3%). Frequencies of USDA YG distributions were YG 1, 12.4%; YG 2, 41.0%; YG 3, 36.3%; YG 4, 8.6%; and YG 5, 1.6%. Mean USDA quality grade (QG) traits were USDA quality grade (Select(93)), marbling score (Small(40)), overall maturity (A(59)), lean maturity (A(54)), and skeletal maturity (A(62)). Frequencies of USDA QG distributions were Prime, 2.1%; Choice, 58.9%; Select, 32.6%; and Standard or less, 6.3%. Marbling score distribution was Slightly Abundant or greater, 2.3%; Moderate, 5.0%; Modest, 17.3%; Small, 39.7%; Slight, 34.6%; and Traces or less, 1.1%. Carcasses with QG of Select or greater and YG 3 or less represented 85.1% of the sample. This is the fifth benchmark study measuring targeted carcass characteristics, and information from this survey will continue to help drive progress in the beef industry. Results will be used in extension and educational programs as teaching tools to inform beef producers and industry professionals of the current state of the U.S. beef industry.
Asunto(s)
Composición Corporal , Bovinos/fisiología , Mercadotecnía , Industria para Empaquetado de Carne/normas , Carne/normas , Análisis de Varianza , Animales , Bovinos/anatomía & histología , Femenino , Análisis de los Mínimos Cuadrados , Masculino , Estados UnidosRESUMEN
The National Beef Quality Audit-2011 (NBQA-2011) was conducted to assess targeted characteristics on the harvest floor that affect the quality and value of cattle, carcasses, and byproducts. Survey teams evaluated approximately 18,000 cattle/carcasses between May and November 2011 in 8 beef processing facilities. Cattle identification methods were lot visual tags (85.7%), individual visual tags (50.6%), electronic tags (20.1%), metal-clip tags (15.7%), other (5.3%), none (2.5%), and wattles (0.5%). Hide colors or breed types were black (61.1%), red (12.8%), yellow (8.7%), Holstein (5.5%), brown (5.0%), gray (5.0%), white (1.4%), and brindle (1.0%). Brand frequencies were none (55.2%), 1 (40.4%), 2 (4.4%), and 3 or more (0.04%) brands, and brands were located on the butt (35.2%), side (9.0%), and shoulder (2.5%). Hide locations of mud or manure were no mud/manure (49.2%), legs (36.8%), belly (23.7%), side (14.9%), top-line (11.0%), and tail region (13.7%). There were 76.2% of cattle without horns, and the majority of those with horns (71.6%) were between 0 cm and 12.7 cm in length. Permanent incisor numbers were zero (87.3%), 1 (1.4%), 2 (8.0%), 3 (0.9%), 4 (1.9%), 5 (0.3%), 6 (0.2%), 7 (0.1%), and 8 (0.02%). Most carcasses (77.0%) were not bruised, 18.7% had 1 bruise, 3.4% had 2 bruises, 0.6% had 3 bruises, and 0.3% had more than 3 bruises. Bruise locations were loin (50.1%), rib (21.3%), chuck (13.8%), round (7.3%), and brisket/flank/plate (7.5%). Condemnation item and incidence were whole carcass (none recorded), liver (20.9%), lungs (17.3%), tongue (10.0%), viscera (9.3%), and head (7.2%). Compared with the NBQA-2005, the NBQA-2011 had an increased percentage of black-hided cattle (56.3 vs. 61.1%), more cattle with brands (38.7 vs. 44.8%), and more cattle with some form of identification (93.3 vs. 97.5%). In addition, there was a lesser percentage of carcasses with bruising in 2011 (23.0%) than in 2005 (35.2%), as well as a smaller percentage of carcasses with more than 1 bruise (2005 = 9.4% vs. 2011 = 4.2%). Compared with the 2005 audit, a similar percentage of the cattle were deemed 30 mo of age or older using dentition (2005 = 2.7% vs. 2011 = 3.3%). The information from NBQA-2011 helps the beef industry measure progress against previous NBQA assessments and provides a benchmark for future educational and research activities.
Asunto(s)
Composición Corporal , Bovinos/fisiología , Industria para Empaquetado de Carne/normas , Carne/normas , Análisis de Varianza , Sistemas de Identificación Animal , Animales , Bovinos/anatomía & histología , Femenino , Análisis de los Mínimos Cuadrados , Masculino , Estiércol/análisis , Productos de la Carne/normas , Estados UnidosRESUMEN
A market basket survey for beef retail cut composition at the retail level (four stores each from two chains in each city) was conducted in 11 US cities from January to March 2006. Beef cuts (n=17,495) were measured for external fat thickness with cuts from the chuck (0.05cm), round (0.05cm), and miscellaneous (0.04cm) having less (P<0.05) fat than cuts from the loin (0.11cm) and rib (0.11cm). Beef cuts (n=1327) were separated physically into separable components with round cuts having more (P<0.05) separable lean (96.63%) than chuck cuts (86.81%) and miscellaneous cuts (86.18%), which had more (P<0.05) separable lean than loin cuts (84.53%) with rib cuts (69.34%) having the lowest (P<0.05) separable lean. Chemical fat from the separable lean differed (P<0.05) between each cut category: round cuts (3.71%), miscellaneous cuts (4.99%), loin cuts (5.60%), chuck cuts (6.90%), and rib cuts (8.61%). Ground beef samples (n=235), with declared lean/fat percentages ranging from 73/27 to 96/4, had overall chemical fat values of 13.41% and moisture values of 67.42%. This survey documents the current beef retail cut and ground beef composition, which is helpful to those who need this information for various dietary and marketing purposes.
RESUMEN
The National Beef Quality Audit-2005 assessed the current status of quality and consistency of US fed steers and heifers. Hide colors or breed type were black (56.3%), red (18.6%), Holstein (7.9%), gray (6.0%), yellow (4.9%), brown (3.0%), white (2.3%), and brindle (1.0%). Identification method and frequency were lot visual tags (63.2%), individual visual tags (38.7%), metal-clip tags (11.8%), electronic tags (3.5%), bar-coded tags (0.3%), by other means (2.5%), and without identification (9.7%). Brand frequencies were no (61.3%), 1 (35.1%), and 2 or more (3.6%), and brands were located on the butt (26.5%), side (7.4%), and shoulder (1.2%). There were 22.3% of cattle without horns, and the majority of those with horns (52.2%) were between 2.54 and 12.7 cm in length. Percentages of animals with mud or manure on specific body locations were none (25.8%), legs (61.4%), belly (55.9%), side (22.6%), and top-line (10.0%). Permanent incisor number and occurrence were zero (82.2%), 1 (5.2%), 2 (9.9%), 3 (0.4%), 4 (1.2%), 5 (0.1%), 6 (0.3%), 7 (0.0%), and 8 (0.7%). Most carcasses (64.8%) were not bruised, 25.8% had one bruise, and 9.4% had multiple bruises. Bruise location and incidence were round (10.6%), loin (32.6%), rib (19.5%), chuck (27.0%), and brisket, flank, and plate (10.3%). Condemnation item and incidence were liver (24.7%), lungs (11.5%), tripe (11.6%), heads (6.0%), tongues (9.7%), and carcasses (0.0%). Carcass evaluation revealed these traits and frequencies: steer (63.7%), heifer (36.2%), bullock (0.05%), and cow (0.04%) sex classes; dark-cutters (1.9%); A (97.1%), B (1.7%), and C or older (1.2%) overall maturities; and native (90.9%), dairy-type (8.3%), and Bos indicus (0.8%) estimated breed types. Mean USDA yield grade (YG) traits were USDA YG (2.9), HCW (359.9 kg), adjusted fat thickness (1.3 cm), LM area (86.4 cm(2)), and KPH (2.3%). The USDA YG were YG 1 (16.5%), YG 2 (36.3%), YG 3 (33.1%), YG 4 (11.8%), and YG 5 (2.3%). Mean USDA quality grade traits were USDA quality grade (Select(90)), marbling score (Small(32)), overall maturity (A(64)), lean maturity (A(57)), and skeletal maturity (A(68)). Marbling score distribution was Slightly Abundant or greater (2.7%), Moderate (4.3%), Modest (14.4%), Small (34.5%), Slight (41.2%), and Traces or less (2.9%). This information helps the beef industry measure progress and provides a benchmark for future educational and research activities.
Asunto(s)
Composición Corporal , Bovinos/fisiología , Industria para Empaquetado de Carne/normas , Carne/normas , Tejido Adiposo , Sistemas de Identificación Animal , Animales , Cruzamiento , Bovinos/anatomía & histología , Dentición , Femenino , Cuernos , Análisis de los Mínimos Cuadrados , Masculino , Estiércol , Pigmentación , Factores SexualesRESUMEN
Effects of 10% xylitol (a five-carbon sugar alcohol) on adhesion of Escherichia coli O157:H7 and Salmonella Typhimurium to meat surfaces were examined with three approaches. First, beef outside round was inoculated with rifampin-resistant E. coli O157:H7 and Salmonella Typhimurium dispersed in xylitol or peptone solution. Samples were rinsed with water or not rinsed in a 2 x 2 factorial arrangement. No interaction existed between inoculum and rinsing treatments (P > 0.84). Incubation in xylitol had minimal impact on pathogen adhesion (P > 0.76); however, rinsing reduced pathogen cell counts (P < 0.01). Second, meat samples were treated with water, xylitol, or no rinse; inoculated with pathogens dispersed in peptone solution (8.6 log CFU/ml for each pathogen); and then treated with water, xylitol, or no rinse in a 3 x 3 factorial arrangement. No interactions were observed (P > 0.50). Postinoculation rinsing reduced pathogen loads (P < 0.01) without difference between water and xylitol (P > 0.64). Third, carcass surfaces inoculated with pathogens (5.5 log CFU/cm2) were treated with 35 degrees C water wash, 2.5% L-lactic acid spray, 10% xylitol spray, lactic acid plus xylitol, or hot water plus xylitol. Lactic acid treatments reduced Salmonella Typhimurium at 0 h (P < 0.01) and 24 h (P < 0.02). Hot water treatments tended to reduce Salmonella Typhimurium at 0 h (P < 0.07). Xylitol did not reduce pathogens (P > 0.62) or increase effectiveness of other treatments. Xylitol does not influence E. coli O157:H7 and Salmonella Typhimurium adhesion to meat surfaces.
Asunto(s)
Adhesión Bacteriana/fisiología , Bovinos/microbiología , Escherichia coli O157/fisiología , Contaminación de Alimentos/análisis , Salmonella typhimurium/fisiología , Xilitol/farmacología , Animales , Recuento de Colonia Microbiana , Relación Dosis-Respuesta a Droga , Escherichia coli O157/efectos de los fármacos , Manipulación de Alimentos/métodos , Microbiología de Alimentos , Humanos , Salmonella typhimurium/efectos de los fármacos , Saneamiento , Edulcorantes/farmacologíaRESUMEN
Beef from retail and foodservice establishments in 11 US cities was evaluated using Warner-Bratzler shear (WBS) and consumer evaluation panels. Postmortem aging times ranged from 3 to 83d for retail and 7 to 136d for foodservice with mean aging times of 22.6d and 30.1d, respectively. For retail, the three cuts from the round - top round, bottom round, and eye of round - had the highest (P<0.05) WBS values compared to cuts from the chuck, rib, and loin. Top loin steaks had the lowest (P<0.05) WBS value compared to ribeye and top sirloin foodservice steaks. Retail bone-in top loin, top loin, ribeye, T-bone, and porterhouse received the highest (P<0.05) ratings by consumers for overall like and like tenderness. Quality grade had little or no effect on foodservice sensory evaluations. Improvements in round tenderness are needed to increase consumer acceptability.
RESUMEN
Bos indicus crossbred cattle (n=79) were fed vitamin D(3) (0 or 3 million IU/hd/d) for 5d. Afterwards, half of each group was slaughtered immediately, while half was fed, without supplementation, for 7d before processing. Serum calcium concentration was increased (P<0.05) in cattle after supplement removal, but not immediately following supplementation. This also was observed in the M. longissimus lumborum and M. triceps brachii, but not in the M. semitendinosus. Liver biopsy vitamin D(3) concentrations were higher (P<0.05) in supplemented cattle immediately following supplementation, but were not different from controls after supplement removal. Vitamin D(3) did not affect tenderness at supplement removal day 0, but increased the tenderness of the M. longissimus lumborum and M. semitendinosus at supplement removal day 7. Vitamin D(3) supplementation improves muscle tenderness and may be more effective when supplementation is ceased 7d before slaughter, with minimum food safety concerns.
RESUMEN
Three groups of steers (A, B, C) were used to study the effect of temperament (Calm, Intermediate, and Excitable) on meat quality. Temperament was based on exit velocity, pen scores, and chute scores. Temperament traits were consistent across evaluations, and values decreased (P<0.05) in magnitude over time. Increasing excitability was associated with higher (P<0.05) serum cortisol concentrations. Carcasses from cattle with calm temperaments had higher (P<0.05) 0.5h postmortem pH values than those from Intermediate and Excitable cattle (0.1 and 0.2 units, respectively). Group C Excitable steers had higher (P<0.05) WBS values than the calmer Group C steers. This trend was observed in Group A steers, although the values were not statistically different. Correlations were highest between temperament values and tenderness after 21d. Temperament influences tenderness, although the mechanism is not clear.
RESUMEN
Our study examined high and low voltage electrical stimulation and postmortem storage as strategies to improve tenderness and lean color in cabrito carcasses. Boer cross (n=60) kids were assigned to either high (550 V), low (20 V), or no electrical stimulation treatments. No differences in muscle temperature were observed between treatments at any time measured. Muscle pH declined fastest in high voltage treated carcasses. High voltage electrical stimulation slightly increased (P<0.05) b (∗) and a (∗) in the M. gluteus medius and tended to increase L (∗) and b (∗) (P=0.06 and 0.11, respectively) values in the M. longissimus thoracis. Electrical stimulation had no effect on myofibril fragmentation at 1-, 3-, or 14-d postmortem or sarcomere length. High voltage electrical stimulation increased (P<0.05) tenderness at 1- and 3-d postmortem, but not at 14-d postmortem. Aging for 3 d did not affect tenderness regardless of stimulation treatment, but aging time for 14 d improved (P<0.05) tenderness. These data indicate that high voltage electrical stimulation and 14 d aging were effective in improving the tenderness of meat from cabrito carcasses.
RESUMEN
The objective of this research was to evaluate the consumer controlled factors of cooking method and degree of doneness on top loin steaks from different USDA quality grades (Low Choice, High Select or Low Select) and breed-types (English, Continental European Cross or Brahman Cross). In addition, cities within the same region were evaluated for differences in consumer controlled factors and palatability responses. The in-home product test was conducted in Dallas and San Antonio, Texas, USA. Consumers (n=173) evaluated steaks for overall like (OSAT), tenderness (TEND), juiciness (JUIC), and flavor (FLAV) using 23-point hedonic scales. Respondents in Dallas cooked their steaks to higher degrees of doneness than did those in San Antonio. Outdoor grilling was the most frequently used method of cookery for steaks in both cities. Generally, consumers in San Antonio gave higher palatability ratings to Choice steaks and Dallas consumers gave higher ratings to Select steaks. The interactions of city×cooking method, breed-type×cooking method, and degree of doneness×cooking method were significant for all palatability attributes. In addition, the interaction of cooking method×quality grade was significant for TEND, JUIC, and FLAV. Warner-Bratzler shear (WBS) force was determined on a steak from each strip loin. Steaks from Continental European Cross cattle and Low Choice carcasses had the lowest WBS values. Differences in consumer preparation of beef top loin steaks present very unique challenges for the beef industry. Consumer information programs may serve a valuable role in connecting consumer perceptions with the preparation techniques needed to consistently achieve satisfaction.