RESUMEN
The Pharmaceutics Editorial Office retracts the article, "Gum Acacia Functionalized Colloidal Gold Nanoparticles of Letrozole as Biocompatible Drug Delivery Carrier for Treatment of Breast Cancer" [...].
RESUMEN
Background: Skin is regarded as an essential first line of defense against harmful pathogens and it hosts an ecosystem of microorganisms that create a widely diverse skin microbiome. In chronic wounds, alterations in the host-microbe interactions occur forming polymicrobial biofilms that hinder the process of wound healing. Ribavirin, an antiviral drug, possesses antimicrobial activity, especially against Pseudomonas aeruginosa and Candida albicans, which are known as the main opportunistic pathogens in chronic wounds. Rationale: In this study, electrospun nanofiber systems loaded with ribavirin were developed as a potential wound dressing for topical application in chronic wounds. Ribavirin was chosen in this study owing to the emerging cases of antimicrobial (antibiotics and antifungal) resistance and the low attempts to discover new antimicrobial agents, which encouraged the repurposing use of current medication as an alternative solution in case of resistance to the available agents. Additionally, the unique mechanism of action of ribavirin, i.e., perturbing the bacterial virulence system without killing or stopping their growth and rendering the pathogens disarmed, might be a promising choice to prevent drug resistance. Cyclodextrin (CD) was utilized to formulate ribavirin as an electrospun nanofibers delivery system to enhance the absorption and accelerate the release of ribavirin for topical use. Results: The results demonstrated a successful ribavirin nanofibers fabrication that lacked beads and pores on the nanofibrous surfaces. Ribavirin underwent a physical transformation from crystalline to amorphous form, as confirmed by X-ray diffraction analysis. This change occurred due to the molecular dispersion after the electrospinning process. Additionally, the CD enhanced the encapsulation efficiency of ribavirin in the nanofibers as observed from the drug-loading results. Polyvinylpyrrolidone (PVP) and CD increased ribavirin released into the solution and the disintegration of fibrous mats which shrank and eventually dissolved into a gel-like substance as the ribavirin-loaded fibers began to break down from their border toward the midpoint. Cytotoxicity of ribavirin and CD was evaluated against human dermal fibroblasts (HFF-1) and the results showed a relatively safe profile of ribavirin upon 24-hour cell exposure, while CD was safe within 24- and 48-hour. Conclusion: This study provides valuable insights into the potential application of our nanofibrous system for treating chronic wounds; however, further antimicrobial and in-vivo studies are required to confirm its safety and effectiveness.
RESUMEN
The journal retracts the article, "Optimized Ellagic Acid-Ca Pectinate Floating Beads for Gastroprotection against Indomethacin-Induced Gastric Injury in Rats" [...].
RESUMEN
Erectile dysfunction (ED) is a growing health condition that needs safe and effective therapy. One of the main common treatments is sildenafil which is used in clinics for managing erectile dysfunction by enhancing the blood supply to the penis. In the current study, sildenafil was formulated as nanofibers and mixed with the root extract of Glycyrrhiza glabra (glycyrrhizin) as a natural sweetener to be administrated in the buccal cavity for enhanced drug bioavailability, rapid drug absorption and improved patient compliance. The formulated dual-loaded nanofibers were evaluated by measuring diameter, disintegration, drug loading efficiency, drug release profile, and in vitro cell viability assessment. The results showed that the sildenafil/glycyrrhizin-loaded fibers had a diameter of 0.719 ± 0.177 µm and lacked any beads and pores formation on their surfaces. The drug loading and encapsulation efficiency for sildenafil were measured as 52 ± 7 µg/mg and 67 ± 9 %, respectively, while they were 290 ± 32 µg/mg and 94 ± 10 %, respectively, for glycyrrhizin. The release rate of sildenafil and glycyrrhizin demonstrated a burst release in the first minute, followed by a gradual increment until a complete release after 120 min. The in vitro cell viability evaluation exhibited that the application of sildenafil and glycyrrhizin is safe upon 24-hour treatment on human skin fibroblast cells at all used concentrations (i.e., ≤ 1,000 and 4,000 µg/mL, respectively). However, the application of sildenafil-glycyrrhizin combination (in a ratio of 1:4) demonstrated more than 80 % cell viability at concentrations of ≤ 250 and 1000 µg/mL, respectively, following 24-hour cell exposure. Therefore, sildenafil/glycyrrhizin dual-loaded PVP nanofibers showed a potential buccal therapeutic approach for erectile dysfunction management.
RESUMEN
Background: Pharmaceutical nanomedicine products are expected to impact the global pharmaceutical market and healthcare system significantly. Since 2000, the Food and Drug Administration (FDA) and European Medicines Agency (EMA) have approved over 80 nanomedicine products for marketing; an additional double that number is currently being tested in clinical trials. The nanomedicine market is expected to reach USD 350.8 billion by 2025 from USD 138.8 billion in 2016. This demonstrates the importance of nanotechnology to the delivery of pharmaceuticals. The main benefits of employing nanotechnology to distribute therapeutic agents include reducing the undesired toxicity from non-specific distribution and increasing patient adherence, which can indirectly minimize the burden on the country's healthcare system. Such products are expected to gain a significant economic impact on Saudi Arabia's pharmaceutical drugs market once they get developed locally. Method: A descriptive and cross-sectional study, including a web-based questionnaire and a complete categorization of pharmaceutical products formed by the national industries in Saudi Arabia, was utilized to investigate the current and future direction of pharmaceutical manufacturing exploiting nanotechnology in the Kingdom. Results: The survey showed an apparent lack of willingness within the national pharmaceutical industries, as the majority (≈ 86%) of the leading Saudi companies cannot enable nanotechnology-based medicines in their manufacturing. However, more than 93% of the national pharmaceutical industries, upon the basis of the responses, agreed that the development of pharmaceutical products with nanotechnology is an important step toward solving various complications associated with conventional forms of the available medicine. Conclusion: National pharmaceutical industries in Saudi Arabia will need to get closer to manufacturing nanomedicines by partnering with international pioneer companies. In addition, empowering the local research and development (R&D) centers in nano delivery systems could facilitate translating their R&D outcomes into novel advanced and commercialized products. This could imitate the direction of the global pharmaceutical market and share its revenue which will positively reflect on the Kingdom's economy.
RESUMEN
BACKGROUND: Antibiotic overuse and misuse have greatly facilitated the development of antimicrobial resistance (AMR). The Kingdom of Saudi Arabia is one of the countries that took a strategic approach, beginning with the prohibition of over-the-counter antibiotic dispensing, followed by the implementation of antimicrobial stewardship programs and various educational and awareness governmental activities and plans. However, the status of antibiotic prescriptions and dispensing in Saudi community pharmacies is still unclear. As a result, this study investigates community pharmacists' antibiotic dispensing practices and their knowledge of their role in fighting AMR, in addition to the status of antibiotic prescribing errors by physicians. METHOD: This is an online-based survey study of 671 participants distributed among community pharmacists of large pharmacy chains throughout the Saudi Arabia. RESULT: A number of 671 community pharmacists were participated in total, with a response rate of 96.57% (648 responses). The majority of community pharmacists (67%) had a long experience (>5 years) in this field. An antibiotic prescribing error was prevalent, with a mean of 3.32 per month in each pharmacy. Dentists (36.7%) and general practitioners (28.7%) were the most prescribers associated with antibiotic prescription errors. Most community pharmacists had a generally good practice of dispensing antibiotics, accounting for 71.5% of daily antibiotic dispensing. However, more than one-third of those pharmacists (35.2%) agreed on dispensing topical antibiotics without a prescription, based on their evaluation of the case presented in the pharmacy, as the majority of community pharmacists demonstrated a significant understanding of AMR. CONCLUSION: The current study demonstrated that there is a good antibiotic dispensing practice in the community pharmacies in Saudi Arabia, in addition to a substantial understanding of the community pharmacist's vital role in fighting AMR. This study could inform decision-makers on antibiotic usage in Saudi community pharmacies to improve the current inappropriate antibiotic use and dispensing situation and, thus, control AMR spread in Saudi Arabia.
Asunto(s)
Antibacterianos , Farmacéuticos , Humanos , Antibacterianos/uso terapéutico , Arabia Saudita , Prescripciones de Medicamentos , Estudios Transversales , Farmacorresistencia BacterianaRESUMEN
The aim of this study was to fabricate and characterize a pharmaceutical emulgel co-loaded with naproxen/eugenol for transdermal delivery to improve the analgesic and anti-inflammatory effects and to eliminate GIT adverse reactions. Emulgel was prepared using a slow emulsification method and evaluated for physical appearance, thermodynamic stability, viscosity, pH, spreadability, extrudability, in-vitro drug release, drug content, ex-vivo permeation, drug retention studies and in-vivo studies. The emulgel exhibited good physical attributes, being thermodynamically stable with no phase separation, having excellent homogeneity, and pH 5.5 to 6.5. Slight changes in viscosity, spreadability and extrudability with respect to high temperature were observed (p > 0.05). The drug content was 96.69 ± 1.18% and 97.24 ± 1.27% for naproxen and eugenol, respectively. The maximum release of naproxen after 12 h was 85.14 ± 1.11%, whereas eugenol was 86.67 ± 1.23% from emulgel following anomalous non-Fickian mechanism. The maximum % permeation of naproxen across skin was 78.5 ± 1.30, whereas maximum % permeation of eugenol was 83.7 ± 1.33 after 12 h. The skin retention of eugenol and naproxen was 8.52 ± 0.22% and 6.98 ± 0.24%, respectively. The optimized emulgel inhibited the carrageenan induced paw edema. The pain reaction times of optimized emulgel and standard marketed product (Voltral®) were 11.16 ± 0.17 and 10.36 ± 0.47, respectively, with no statistically significant difference (p > 0.05). This study concluded that transdermal delivery of naproxen-eugenol emulgel synergized the anti-inflammatory and analgesic effects of naproxen and eugenol.
RESUMEN
Nanocrystals are carrier-free, submicron-sized, colloidal drug delivery systems with particle sizes in the mean nanometer range. Nanocrystals have high bioavailability and fast absorption because of their high dissolution velocity and enhanced adhesiveness to cell membranes. Loxoprofen, a nonsteroidal anti-inflammatory drug belonging to the Biopharmaceutical Classification System (BCS) II drug class, was selected as the model drug. The aim of this study was to formulate nanocrystals of loxoprofen. A total of 12 formulations (F1 to F12) were prepared. An antisolvent technique was used to determine the effects of various stabilizers and processing conditions on the optimization of formulations. The various stabilizers used were hydroxypropyl methylcellulose (0.5%), polyvinylpyrrolidone (0.5%), and sodium lauryl sulfate (0.1%). The various characterizations conducted for this research included stability studies at 25 °C and 4 °C, scanning electron microscopy, transmission electron microscopy (TEM), X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), zeta potentials, polydispersity indexes, and dissolution studies. F10 was the optimized formulation that showed stability at room temperature, as well as at a refrigerated temperature, for 30 days. A high dissolution rate (100% within the first 10 min) was shown by comparative dissolution studies of nano-suspensions with the micro-suspension and raw loxoprofen. F10 formulation had a non-porous and crystalline morphology on evaluation by TEM and XRPD, respectively, and the average particle size was 300 ± 0.3 nm as confirmed by TEM. DSC recorded a reduction in the melting point (180 °C processed and 200 °C unprocessed melting points). The dissolution rate and solubility of the formulated loxoprofen nanocrystals were significantly enhanced. It can be concluded that selecting suitable stabilizers (i.e., polymers and surfactants) can produce stable nanocrystals, and this can potentially lead to a scaling up of the process for commercialization.
RESUMEN
Most vaccines approved by regulatory bodies are administered via intramuscular or subcutaneous injections and have shortcomings, such as the risk of needle-associated blood infections, pain and swelling at the injection site. Orally administered vaccines are of interest, as they elicit both systemic and mucosal immunities, in which mucosal immunity would neutralize the mucosa invading pathogen before the onset of an infection. Hence, oral vaccination can eliminate the injection associated adverse effects and enhance the person's compliance. Conventional approaches to manufacturing oral vaccines, such as coacervation, spray drying, and membrane emulsification, tend to alter the structural proteins in vaccines that result from high temperature, organic and toxic solvents during production. Electrohydrodynamic processes, specifically electrospraying, could solve these challenges, as it also modulates antigen release and has a high loading efficiency. This review will highlight the mucosal immunity and biological basis of the gastrointestinal immune system, different oral vaccine delivery approaches, and the application of electrospraying in vaccines development.
RESUMEN
Non-small cell lung cancer, a molecularly diverse disease, is the most prevalent cause of cancer mortality globally. Increasing understanding of the clinicopathology of the disease and mechanisms of tumor progression has facilitated early detection and multimodal care. Despite the advancements, survival rates are extremely low due to non-targeted therapeutics and correspondingly increased risk of metastasis. At some phases of cancer, patients need to face the ghost of chemotherapy. It is a difficult decision near the end of life. Such treatments have the capability to prolong survival or reduce symptoms, but can cause serious adverse effects, affecting quality of life of the patient. It is evident that many patients do not die from burden of the disease alone, but they die due to the toxic effect of treatment. Thus, increasing the efficacy is one aspect and decreasing the toxicity is another critical aspect of cancer formulation design. Through our current research, we tried to uncover both mentioned potentials of the formulation. Therefore, we designed actively targeted nanoparticles for improved therapeutics considering the overexpression of adenosine (ADN) receptors on non-small cell lung cancer (NSCLC) cells. Docetaxel (DTX), an essential therapeutic as part of combination therapy or as monotherapy for the treatment of NSCLC, was encapsulated in biodegradable poly(lactic-co-glycolic acid) nanoparticles. ADN was conjugated on the surface of nanoparticles using EDC-NHS chemistry. The particles were characterized in vitro for physicochemical properties, cellular uptake, and biocompatibility. The size and zeta potential of DTX nanoparticles (DPLGA) were found to be 138.4 ± 5.45 nm and -16.7 ± 2.3 mV which were found to change after ADN conjugation. The size was increased to 158.2 ± 6.3 nm, whereas zeta potential was decreased to -11.7 ± 1.4 mV for ADN-conjugated DTX nanoparticles (ADN-DPLGA) indicative of surface conjugation. As observed from transmission electron microscopy (TEM), the nanoparticles were spherical and showed no significant change in encapsulation efficiency even after surface conjugation. Careful and systematic optimization leads to ADN-conjugated PLGA nanoparticles having distinctive characteristic features such as particle size, surface potential, encapsulation efficacy, etc., that may play crucial roles in the fate of nanoparticles (NPs). Consequently, higher cellular uptake in the A549 lung cancer cell line was exhibited by ADN-DPLGA compared to DPLGA, illustrating the role of ADN receptors (ARs) in facilitating the uptake of NPs. Further in vivo pharmacokinetics and tissue distribution experiments revealed prolonged circulation in plasma and significantly higher lung tissue distribution than in other organs, dictating the targeting potential of the developed formulation over naïve drug and unconjugated formulations. Further, in vivo acute toxicity was examined using multiple parameters for non-toxic attributes of the developed formulation compared to other non-targeted organs. Further, it also supports the selection of biocompatible polymers in the formulation. The current study presents a proof-of-concept for a multipronged formulation technology strategy that might be used to maximize anticancer therapeutic responses in the lungs in the treatment of NSCLC. An improved therapeutic and safety profile would help achieve maximum efficacy at a reduced dose that would eventually help reduce the toxicity.
RESUMEN
Treatment of posterior eye diseases with intravitreal injections of drugs, while effective, is invasive and associated with side effects such as retinal detachment and endophthalmitis. In this work, we have formulated a model compound, rapamycin (RAP), in nanoparticle-based eye drops and evaluated the delivery of RAP to the posterior eye tissues in a healthy rabbit. We have also studied the formulation in experimental autoimmune uveitis (EAU) mouse model with retinal inflammation. Aqueous RAP eye drops were prepared using N-palmitoyl-N-monomethyl-N,N-dimethyl-N,N,N-trimethyl-6-O-glycolchitosan (Molecular Envelope Technology - MET) containing 0.23 ± 0.001% w/v RAP with viscosity, osmolarity, and pH within the ocular comfort range, and the formulation (MET-RAP) was stable in terms of drug content at both refrigeration and room temperature for one month. The MET-RAP eye drops delivered RAP to the choroid-retina with a Cmax of 145 ± 49 ng/g (tmax = 1 h). The topical application of the MET-RAP eye drops to the EAU mouse model resulted in significant disease suppression compared to controls, with activity similar to dexamethasone eye drops. The MET-RAP eye drops also resulted in a reduction of RORγt and an increase in both Foxp3 expression and IL-10 secretion, indicating a mechanism involving the inhibition of Th17 cells and the up-regulation of T-reg cells. The MET-RAP formulation delivers RAP to the posterior eye segments, and the formulation is active in EAU.
Asunto(s)
Segmento Posterior del Ojo , Uveítis , Animales , Ratones , Soluciones Oftálmicas/farmacología , Conejos , Retina , Sirolimus/farmacología , Uveítis/tratamiento farmacológicoRESUMEN
Geriatric patients are more likely to suffer from multiple chronic diseases that require using several drugs, which are commonly ingested. However, to enhance geriatric patients' convenience, the electrospun nanofiber system was previously proven to be a successful alternative for the existing oral dosage forms, i.e., tablets and capsules. These nanofibers prepared either as single- or multi-layered fibers could hold at least one active compound in each layer. They might also be fabricated as ultra-disintegrated fibrous films for oral cavity administration, i.e., buccal or sublingual, to improve the bioavailability and intake of the administered drugs. Therefore, in this work, a combination of nifedipine and atorvastatin calcium, which are frequently prescribed for hypertension and hyperlipidemia patients, respectively, was prepared in a coaxial electrospinning system for buccal administration. Scanning electron microscopy image showed the successful preparation of smooth, non-beaded, and non-porous surfaces of the drug-loaded nanofibers with an average fiber diameter of 968 ± 198 nm. In contrast, transmission electron microscopy distinguished the inner and outer layers of those nanofibers. The disintegration of the drug-loaded nanofibers was ≤12 s, allowing the rapid release of nifedipine and atorvastatin calcium to 61% and 47%, respectively, after 10 min, while a complete drug release was achieved after 120 min. In vitro, a drug permeation study using Franz diffusion showed that the permeation of both drugs from the core-shell nanofibers was enhanced significantly (p < 0.05) compared to the drugs in a solution form. In conclusion, the development of drug-loaded nanofibers containing nifedipine and atorvastatin calcium can be a potential buccal delivery system.
RESUMEN
Local production of pharmaceuticals plays a vital role in maintaining resilience of national healthcare systems, especially when it comes to facilitating access to needed medicines and decreasing exposure to imports and international supply chains. Pharma is a research-intensive industry and the systemic lack of governance and support to R&D activities in this sector, among other host of related issues such as unsupportive regulatory regimes and human resources capacity limitations, is one of the major impediments to the diversifying of locally produced pharmaceuticals portfolio. In this review, an overview of the current pharmaceutical production system in Saudi Arabia, its major challenges, and proposed remedies to address them will be highlighted.
RESUMEN
Nanotechnology plays a significant role in the field of medicine and in drug delivery, mainly due to the major limitations affecting the conventional pharmaceutical agents, and older formulations and delivery systems. The effect of nanotechnology on healthcare is already being felt, as various nanotechnology applications have been developed, and several nanotechnology-based medicines are now on the market. Across many parts of the world, nanotechnology draws increasing investment from public authorities and the private sector. Most conventional drug-delivery systems (CDDSs) have an immediate, high drug release after administration, leading to increased administration frequency. Thus, many studies have been carried out worldwide focusing on the development of pharmaceutical nanomedicines for translation into products manufactured by local pharmaceutical companies. Pharmaceutical nanomedicine products are projected to play a major role in the global pharmaceutical market and healthcare system. Our objectives were to examine the nanomedicines approved by the Food and Drug Administration (FDA) and the European Medicines Agency (EMA) in the global market, to briefly cover the challenges faced during their development, and to look at future perspectives. Additionally, the importance of nanotechnology in developing pharmaceutical products, the ideal properties of nanocarriers, the reasons behind the failure of some nanomedicines, and the important considerations in the development of nanomedicines will be discussed in brief.
RESUMEN
Urticaria affects all age groups of a population. It is triggered by allergens in foods, insect bites, medications, and environmental conditions. Urticaria is characterized by itching, a burning sensation, wheals and flares, erythema, and localized edema. The aim of this study was to develop a polymeric dosage form of ebastine using Carbopol 940 and mixture of span and tween. The emulsion was prepared, the gelling agent was added and the desired emulgel loaded with active drug was formulated. The formulations were subjected to physical stability, pH, viscosity, spreadability, drug content analysis, thermal analysis, in vitro drug release, and in vivo anti-allergic activity in animal model. The formulated emulgel exhibited good physical stability. The pH of the formulation was in the range of 5.2 ± 0.17 to 5.5 ± 0.20 which is suitable for topical application. Insignificant changes (p > .05) were observed in viscosity and spreadability of stored emulgels. The drug content was in the official limit of Pharmacopeia (i.e. 100 ± 10%). DSC measurements predicted that there is no interaction between the active moiety and excipients in emulgel formulation. The optimized formulation (ES3) released 74.25 ± 1.8% of ebastine after 12 h. The ebastine emulgel showed significant (p < .05; ANOVA) in vivo anti-allergic activity as compared to commercial product Benadryl® in histamine-induced allergy in rabbits. This study concluded that a topical drug delivery of ebastine-loaded emulgel could be well tolerated and safe for the treatment of urticaria/hives.
Asunto(s)
Resinas Acrílicas/química , Butirofenonas/farmacología , Geles/química , Antagonistas de los Receptores Histamínicos H1/farmacología , Piperidinas/farmacología , Urticaria/patología , Administración Cutánea , Animales , Butirofenonas/administración & dosificación , Química Farmacéutica , Modelos Animales de Enfermedad , Portadores de Fármacos/química , Liberación de Fármacos , Estabilidad de Medicamentos , Emulsiones/química , Antagonistas de los Receptores Histamínicos H1/administración & dosificación , Concentración de Iones de Hidrógeno , Masculino , Piperidinas/administración & dosificación , Conejos , Reología , ViscosidadRESUMEN
The most prevalent malignancy among postmenopausal women is breast cancer. It is one of the leading causes of cancer-related mortality among women. Letrozole (LTZ) is a clinically approved inhibitor for breast cancer in postmenopausal women. However, due to poor aqueous solubility, non-specific binding, unwanted toxicity, and poor blood circulation hampered its clinical applications. To maximize the pharmacological effects and minimize the side effects, inorganic nanoparticles are a good alternative. Due to excellent biocompatibility and minimum cytotoxicity, gold nanoparticles (AuNPs) offer distinct benefits over other metal nanoparticles. Emerging as attractive components, AuNPs and Gum acacia (GA) have been extensively studied as biologically safe nanomaterials for the treatment of cancers. This study reports the synthesis and characterization of GA stabilized gold nanoparticles (GA-AuNPs) of LTZ for breast cancer treatment. The observed particle size of optimized LTZ @ GA-AuNPs was 81.81 ± 4.24 nm in size, 0.286 ± 0.143 of polydispersity index (PDI) and -14.6 ± -0.73 mV zeta potential. The biologically synthesized LTZ @ GA-AuNPs also demonstrated dose-dependent cytotoxicity against the human breast cancer cell line MCF-7, with an inhibitory concentration (IC50) of 3.217 ± 0.247. We determined the hemolytic properties of the LTZ @ GA-AuNPs to evaluate the interaction between the nanoparticles and blood components. Results showed that there is no interaction between LTZ @ GA-AuNPs and blood. In conclusion, the findings indicate that LTZ @ GA-AuNPs has significant potential as a promising drug delivery carrier for treating breast cancer in postmenopausal women.
RESUMEN
A peptic ulcer is an alimentary tract injury that leads to a mucosal defect reaching the submucosa. This work aimed to optimize and maximize ellagic acid (EA) loading in Ca pectinate floating beads to maximize the release for 24 h. Three factors were selected: Ca pectinate concentration (X1, 1-3 w/v %), EA concentration (X2, 1-3 w/v %) and the dropping time (X3, 10-30 min). The factorial design proposed eight formulations. The optimized EA-Ca pectinate formulation was evaluated for the gastric ulcer index and the oxidative stress parameter determination of gastric mucosa. The results indicated that the optimum EA-Ca pectinate formula significantly improved the gastric ulcer index in comparison with raw EA. The protective effect of the optimized EA-Ca pectinate formula was further indicated by the histopathological features of the stomach. The results of the study indicate that an EA formulation in the form of Ca pectinate beads would be effective for protection against gastric ulcers because of Nonsteroidal anti-inflammatory drugs (NSAID) administration.
Asunto(s)
Ácido Elágico/administración & dosificación , Indometacina/efectos adversos , Pectinas/química , Úlcera Gástrica/tratamiento farmacológico , Animales , Modelos Animales de Enfermedad , Ácido Elágico/química , Ácido Elágico/farmacología , Masculino , Estrés Oxidativo/efectos de los fármacos , Tamaño de la Partícula , Ratas , Úlcera Gástrica/inducido químicamente , Resultado del TratamientoRESUMEN
We have designed an efficient, synthetic nucleic acid vector, which is relatively non-toxic. [N-(2-ethylamino)-6-O-glycolchitosan - EAGC] polymers were 10-50 fold less toxic than Lipofectamine 2000, able to complex DNA, mRNA and siRNA into positively charged (zeta potential=+40 - 50mV), 50-450nm nanoparticles. The level of tertiary amine N-2-ethylamino substitution (DStert) was inversely proportional to the IC50 of the EAGC polymers in the A431 cell line: IC50=6.18DStert-0.9, r2=0.9991. EAGC polyplexes were stable against a heparin challenge, able to protect the nucleic acids from nuclease degradation and achieve levels of transfection comparable to Lipofectamine 2000 formulations. The relative biocompatibility of the vector allowed 10 fold higher doses of DNA (1µg compared to 0.1µg per well with Lipofectamine 2000) and siRNA (10.7µg per well vs 1.3µg with Lipofectamine 2000) to be applied to cells, when compared to Lipofectamine 2000. Finally intranasal application of EAGC - siRNA complexes resulted in siRNA transfer to the neurons of the olfactory bulb.