Resistive Memristors Using Robust Electropolymerized Porous Organic Polymer Films as Switchable Materials.

Porous organic polymers (POPs) with inherent porosity, tunable pore environment, and semiconductive property are ideally suitable for application in various advanced semiconductor-related devices. However, owing to the lack of processability, POPs are usually prepared in powder forms, which limits their application in advanced devices. Herein, we demonstrate an example of information storage application of POPs with film form prepared by an electrochemical method. The growth process of the electropolymerized films in accordance with the Volmer-Weber model was proposed by observation of atomic force microscopy. Given the mechanism of the electron transfer system, we verified and mainly emphasized the importance of porosity and interfacial properties of porous polymer films for memristor. As expected, the as-fabricated memristors exhibit good performance on low turn-on voltage (0.65 ± 0.10 V), reliable data storage, and high on/off current ratio (104). This work offers inspiration for applying POPs in the form of electropolymerized films in various advanced semiconductor-related devices.

Construction synergetic adsorption and activation surface via confined Cu/Cu2O and Ag nanoparticles on TiO2 for effective conversion of CO2 to CH4.

High-performance photocatalysts for catalytic reduction of CO2 are largely impeded by inefficient charge separation and surface activity. Reasonable design and efficient collaboration of multiple active sites are important for attaining high reactivity and product selectivity. Herein, Cu-Cu2O and Ag nanoparticles are confined as dual sites for assisting CO2 photoreduction to CH4 on TiO2. The introduction of Cu-Cu2O leads to an all-solid-state Z-scheme heterostructure on the TiO2 surface, which achieves efficient electron transfer to Cu2O and adsorption and activation of CO2. The confined nanometallic Ag further enhances the carrier's separation efficiency, promoting the conversion of activated CO2 molecules to •COOH and further conversion to CH4. Particularly, this strategy is highlighted on the TiO2 system for a photocatalytic reduction reaction of CO2 and H2O with a CH4 generation rate of 62.5 µmol∙g-1∙h-1 and an impressive selectivity of 97.49 %. This work provides new insights into developing robust catalysts through the artful design of synergistic catalytic sites for efficient photocatalytic CO2 conversion.

Modulating Skeletons of Covalent Organic Framework for High-Efficiency Gold Recovery.

Covalent organic frameworks (COFs) have attracted considerable attention as adsorbents for capturing and separating gold from electronic wastes. To enhance the binding capture efficiency, constructing hydrogen-bond nanotraps along the pore walls was one of the most widely adopted approaches. However, the development of absorbing skeletons was ignored due to the weak binding ability of the gold salts (Au). Herein, we demonstrated skeleton engineering to construct highly efficiently absorbs for Au capture. The strong electronic donating feature of diarylamine units enhanced the electronic density of binding sites (imine-linkage) and thus resulted in high capacities over 1750 mg g-1 for all three COFs. Moreover, the absorbing performance was further improved via the ionization of diarylamine units. The ionic COF achieved 90 % of the maximal adsorption capacity, 1.63 times of that from the charge-neutral COF within ten minutes, and showed remarkable uptakes of 1834 mg g-1 , exceptional selectivity (97.45 %) and cycling stability. The theoretical calculation revealed the binding sites altering from imine bonds to ionic amine sites after ionization of the frameworks, which enabled to bind the AuCl4 - via coulomb force and contributed to enhanced absorbing kinetics. This work inspires us to design molecular/ionic capture based on COFs.

Synthesis of a covalent organic framework with hetero-environmental pores and its medicine co-delivery application.

The topology type and the functionalization of pores play an important role in regulating the performance of covalent organic frameworks. Herein, we designed and synthesized the covalent organic framework with hetero-environmental pores using predesigned asymmetrical dialdehyde monomer. According to the results of structural characterization, crystallinity investigation, and theoretical calculation, the hetero-environmental pores of the obtained framework are regarded as the alternant arrangement. The distinctive hetero pore structure leads the designed material to show more advantages as compared with control materials in loading both hydrophobic and hydrophilic antibiotics for wound healing. This dual-antibiotic strategy can expand the antibacterial range as compared with the single antibiotic one, and reduce the generation of drug resistance. In summary, this strategy for designing covalent organic frameworks with hetero-environmental pores can extend the structural variety and provide a pathway for improving the practical application performance of these materials.

Linkages Make a Difference in the Photoluminescence of Covalent Organic Frameworks.

Covalent organic frameworks (COFs) with structural designability and tunability of photophysical properties enable them to be a promising class of organic luminescent materials by incorporating well-designed fluorescent units directly into the periodic skeletons. The photophysical properties of COFs are mainly affected by the structural features, which determine the conjugation degree, charge delocalization ability, and exciton dynamics of COFs. To understand the relationship between COF structures and their photophysical properties, two COFs with the same pyrene chromophore units but different linkages (imine or vinylene) were designed and synthesized. Interestingly, different linkages endow COFs with huge differences in solid-state photoluminescence quantum yield (PLQY) for imine- and vinylene-linked pyrene-based COFs, which possess PLQY values of 0.34 % and 15.43 %, respectively. The femtosecond-transient absorption spectra and time-dependent density functional theory reveal the different charge-transfer pathways in imine- and vinylene-linked COFs, which influence the exciton relaxation way and fluorescence intensity. In addition, an effective white-light device was obtained by coating the vinylene-linked COF on a light-emitting diode strip.

A Fully Conjugated Covalent Organic Framework with Oxidative and Reductive Sites for Photocatalytic Carbon Dioxide Reduction with Water.

Constructing a powerful photocatalytic system that can achieve the carbon dioxide (CO2 ) reduction half-reaction and the water (H2 O) oxidation half-reaction simultaneously is a very challenging but meaningful task. Herein, a porous material with a crystalline topological network, named viCOF-bpy-Re, was rationally synthesized by incorporating rhenium complexes as reductive sites and triazine ring structures as oxidative sites via robust -C=C- bond linkages. The charge-separation ability of viCOF-bpy-Re is promoted by low polarized π-bridges between rhenium complexes and triazine ring units, and the efficient charge-separation enables the photogenerated electron-hole pairs, followed by an intramolecular charge-transfer process, to form photogenerated electrons involved in CO2 reduction and photogenerated holes that participate in H2 O oxidation simultaneously. The viCOF-bpy-Re shows the highest catalytic photocatalytic carbon monoxide (CO) production rate (190.6 µmol g-1 h-1 with about 100 % selectivity) and oxygen (O2 ) evolution (90.2 µmol g-1 h-1 ) among all the porous catalysts in CO2 reduction with H2 O as sacrificial agents. Therefore, a powerful photocatalytic system was successfully achieved, and this catalytic system exhibited excellent stability in the catalysis process for 50 hours. The structure-function relationship was confirmed by femtosecond transient absorption spectroscopy and density functional theory calculations.

Holey Ti3C2 MXene-Derived Anode Enables Boosted Kinetics in Lithium-Ion Capacitors.

Lithium-ion capacitors (LICs) attract enormous attention because of the urgent demands for high power and energy density devices. However, the intrinsic imbalance between anodes and cathodes with different charge-storage mechanisms blocks the further improvement in energy and power density. MXenes, novel two-dimensional materials with metallic conductivity, accordion-like structure, and regulable interlayer spacing, are widely employed in electrochemical energy storage devices. Herein, we propose a holey Ti3C2 MXene-derived composite (pTi3C2/C) with enhanced kinetics for LICs. This strategy effectively decreases the surface groups (-F and -O) and generates expanded interplanar spacing. The in-plane pores of Ti3C2Tx lead to increased active sites and accelerated lithium-ion diffusion kinetics. Benefiting from the expanded interplanar spacing and accelerated lithium-ion diffusion, the pTi3C2/C as an anode implements excellent electrochemical property (capacity retention about 80% after 2000 cycles). Furthermore, the LIC fabricated with a pTi3C2/C anode and an activated carbon cathode displays a maximum energy density of 110 Wh kg-1 and a considerable energy density of 71 Wh kg-1 at 4673 W kg-1. This work provides an effective strategy to achieve high antioxidant capability and boosted electrochemical properties, which represents a new exploration of structural design and tuneable surface chemistry for MXene in LICs.

Fluorine-Containing Covalent Organic Frameworks: Synthesis and Application.

Covalent organic frameworks (COFs) are a type of crystalline porous polymers that possess ordered structures and eternal pores. Because of their unique structural characteristics and diverse functional groups, COFs have been used in various application fields, such as adsorption, catalysis, separation, ion conduction, and energy storage. Among COFs, the fluorine-containing COFs (fCOFs) have been developed for special applications by virtue of special physical and chemical properties resulting from fluorine element, which is a nonmetallic halogen element and possesses strong electronegativity. In the organic chemistry field, introducing fluorine into chemicals enables those chemicals to exhibit many interesting properties, and fluorine chemistry increasingly plays an important role in the history of chemical development. The introduction of fluorine in COFs can enhance the crystallinity, porosity, and stability of COFs, making COFs having superior performances and some new applications. In this review, the synthesis and application of fCOFs are systematically summarized. The application involves photocatalytic production of hydrogen peroxide, photocatalytic water splitting, electrocatalytic CO2 reduction, adsorption for different substances (H2 , pesticides, per-/polyfluoroalkyl substances, polybrominated diphenyl ethers, bisphenols, and positively charged organic dye molecules), oil-water separation, energy storage (e.g., zinc-ion batteries, lithium-sulfur batteries), and proton conduction. Perspectives of remaining challenges and possible directions for fCOFs are also discussed.

Electrochemical Preparation of Porous Organic Polymer Films for High-Performance Memristors.

Porous organic polymer films (PFs) with intrinsical porosity and tuneable pore environment are ideally suited for application in electronic devices. However, the huge challenges still exist for construction of electronic devices based on PFs owing to lack of robustness, processability, and controllable preparation. Herein, we report the electrochemical preparation of carbazole-based porous organic polymer films (eCPFs) as switchable materials for the memristors. These eCPFs possess the characteristics of controllable thickness/size, high stability, and excellent porosity. Carbazole and cyano groups are introduced into the eCPFs to constructing electron transfer systems. Thus, the memristors constructed based on these eCPFs exhibit excellent switching performance, reliability, and reproducibility. The electrochemically controllable preparation method of porous organic polymer membranes proposed in this paper provides a feasible idea for the developments of electronic devices.

Porous organic polymers for electrocatalysis.

Porous organic polymers (POPs) composed of organic building units linked via covalent bonds are a class of lightweight porous network materials with high surface areas, tuneable pores, and designable components and structures. Owing to their well-preserved characteristics in terms of structure and composition, POPs applied as electrocatalysts have shown promising activity and achieved considerable advances in numerous electrocatalytic reactions, including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, CO2 reduction reaction, N2 reduction reaction, nitrate/nitrite reduction reaction, nitrobenzene reduction reaction, hydrogen oxidation reaction, and benzyl alcohol oxidation reaction. Herein, we present a systematic overview of recent advances in the applications of POPs in these electrocatalytic reactions. The synthesis strategies, specific active sites, and catalytic mechanisms of POPs are summarized in this review. The fundamental principles of some electrocatalytic reactions are also concluded. We further discuss the current challenges of and perspectives on POPs for electrocatalytic applications. Meanwhile, the possible future directions are highlighted to afford guidelines for the development of efficient POP electrocatalysts.

In-situelectrochemical polymerization of aniline on flexible conductive substrates for supercapacitors and non-enzymatic ascorbic acid sensors.

Polyaniline, as a kind of conductive polymer with commercial application prospects, is still under researches in its synthesis and applications. In this work, polyaniline was fabricated on flexible substrates including carbon cloths and polyethylene naphthalate byin situelectropolymerization method. The synthesized flexible electrodes were characterized by scanning electron microscopy, High resolution transmission electron microscope, atomic force microscope, Fourier transform infrared, x-ray diffraction, and x-ray photoelectron spectroscopy. Owing to the conductivity and the reversible redox property, the polyaniline/carbon cloth electrodes show excellent properties such as decent supercapacitor performance and good detection capability toward ascorbic acid. As supercapacitors, the electrodes exhibit a specific capacitance as high as 776 F g-1at a current density of 1 A g-1and a long cycle life of 20 000 times in the three-electrode system. As ascorbic acid sensors, the flexible electrodes demonstrate stable response to ascorbic acid in the range of 1-3000µM with an outstanding sensitivity (4228µA mM-1cm-2), low detection limit (1µM), and a fast response time. This work holds promise for high-performance and low-cost flexible electrodes for both supercapacitors and non-enzymatic ascorbic acid sensors, and may inspire inventions of self-powered electrochemical sensor.

Synergistic Catalysis of Ionic Liquid-Decorated Covalent Organic Frameworks with Polyoxometalates for CO2 Cycloaddition Reaction under Mild Conditions.

The cycloaddition of carbon dioxide (CO2) with epoxides to yield highly value-added cyclic carbonates is an effective way to chemically utilize and convert CO2. Here, a heterogeneous catalyst of imidazole ionic liquid-decorated covalent organic framework with polyoxometalates (POM@ImTD-COF) was constructed by the covalent modification of ionic liquids to COFs and the electrostatic interaction between POMs and ionic liquids. The obtained POM@ImTD-COF shows high catalytic activity for CO2 cycloaddition reaction under mild conditions (1 atm and 80 °C) in the presence of a co-catalyst, and the catalytic activity of POM@ImTD-COF has no obvious decrease during reusing five times. The excellent catalytic performance is mainly attributed to the synergistic effect of ionic liquids, POMs, and COFs. In the cycloaddition process, ionic liquids and the co-catalyst weaken the C-O bond of epoxides and promote the ring opening of epoxides. POMs as the Lewis acids facilitate the insertion of CO2 to form reaction intermediates. The multiple activation effect of ionic liquids and POMs together with the CO2 adsorption effect and well-dispersed active sites in COFs contribute to the remarkable catalytic performance.

Guiding Uniformly Distributed Li-Ion Flux by Lithiophilic Covalent Organic Framework Interlayers for High-Performance Lithium Metal Anodes.

Lithium (Li) metal anodes are regarded as prospective anode materials in next-generation secondary lithium batteries due to their ultrahigh theoretical capacities and ultralow potentials. However, inhomogeneous lithium deposition and uncontrollable growth of lithium dendrites always give rise to the low lithium utilization, rapid capacity fading, and poor cycling performance. Herein, we design the lithiophilic covalent organic frameworks (COFs) containing preorganized triazine rings and carbonyl groups as the multifunctional interlayer in lithium metal batteries (LMBs). Triazine rings rich in lone pair electrons can act as the donor attracting Li ions, and carbonyl groups serve as Li-anchoring sites effectively coordinating Li ions. These periodic arranged subunits significantly guide uniform Li ion flux distribution, guarantee smooth Li deposition and less lithium dendrite formation. Consequently, the symmetric batteries with COF interlayers exhibit an extraordinary cycling stability for more than 2450 and 1000 h with ultralow polarization voltage of about 12 and 14 mV at 0.5 and 1.0 mA cm-1. Coupling with sulfur (S) cathodes and LiFePO4 (LFP) cathodes, the full cells also demonstrate superb energy density achievement and rate performance. With introducing lithiophilic COFs interlayers, the Li-LFP batteries exhibit high capacity of 150 mAh g-1 and 86% capacity retention after 450 cycles at 0.5 C.

FeCoP2 Nanoparticles Embedded in N and P Co-doped Hierarchically Porous Carbon for Efficient Electrocatalytic Water Splitting.

The design and synthesis of low-cost and efficient bifunctional electrocatalysts for water splitting are critical and challenging. Hereby, a bimetallic phosphide embedded in a N and P co-doped porous carbon (FeCoP2@NPPC) material was synthesized by using sustainable biomass-derived N- and P-containing carbohydrates and non-noble metal salts as precursors. The obtained material exhibits good catalytic activities in hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting. The bimetallic alloy phosphide (FeCoP2) is the active site for electrocatalysis. Theoretical calculation indicates that the sub-layer Fe atoms and top-layer Co atoms in FeCoP2 exhibit a synergistic effect for enhanced electrocatalytic performance. The carbon matrix around the FeCoP2 can prevent the corrosion during the catalytic reactions. The hierarchically porous structure of the FeCoP2@NPPC material can promote the transfer of electrons and electrolyte, and increase the contact area of the active sites and electrolytes. N- and P-containing functionalities improve the wetting and conductivity properties of the porous carbon. Due to the synergistic effects, FeCoP2@NPPC requires a low overpotential of 114 and 150 mV at the current density of 10 mA cm-2 for HER in 0.5 M H2SO4 and 1.0 M KOH, and an overpotential of 236 mV for OER in 1.0 M KOH solution, which are much lower than those of FeP@NPPC and CoP@NPPC. Based on the density functional theory calculation, FeCoP2 yields the smallest Gibbs free energy change of rate-determining step among the samples, which leads to better electrochemical performances. In addition, when FeCoP2@NPPC was used as a bifunctional catalyst in water splitting, the electrolyzer needed a low voltage of 1.60 V to deliver the current density of 10 mA cm-2. Furthermore, this work provides a strategy for preparing sustainable, stable, and highly active electrocatalysts for water splitting.

N-doped graphitic carbon shell-encapsulated FeCo alloy derived from metal-polyphenol network and melamine sponge for oxygen reduction, oxygen evolution, and hydrogen evolution reactions in alkaline media.

Exploiting low cost and durable electrocatalysts with high efficiency for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) is of great significance for energy conversion and storage applications. Herein, a hybrid electrocatalyst of FeCo alloy nanoparticles embedded in a porous N-doped carbon was prepared via a pyrolysis process of low-cost melamine sponge and mass-produced metal-polyphenol network. Benefting from the metal coordination of metal-polyphenol network and abundant N source of melamine sponge, the metal-N moiety and FeCo alloy nanoparticles (wtih a diameter around 50 nm) encapsulated in a N-doped graphene-like carbon layer were formed in-situ. Such intimate integration of graphene-like carbon-encapsulated FeCo alloys, metal-N active species, and porous structure is conducive to improve the catalytic activity and increase the catalytic durability in alkaline media. As a consequence, the as-prepared electrocatalyst exhibits the pronounced activity toward ORR, OER, and HER simultaneously under alkaline condition, particularly on the performances of potential, stability, and methanol tolerance.

Iminodiacetic acid-functionalized porous polymer for removal of toxic metal ions from water.

The design of efficient adsorbent with abundant binding sites for heavy metal ions is crucial for developing innovative materials that will remove pollutant metal ions. The high uptake capacity, kinetics, and affinity towards the toxic metals are the key requirements that the materials under invesigation should accomplish. Here we report the synthesis of iminodiacetic acid-functionalized hypercrosslinked polymer (IDA-HCP) for purification of water polluted by toxic metal ions via coordination of carboxylate and amino active sites on the surface of porous polymer. The obtained porous polymer is stable under harsh conditions and the structural features on the polymer work together to help the removal of Pb(II) with 1138 mg g-1 uptake capacity. In the meanwhile, the IDA-HCP reveals reuseability and very promising capture efficiency not only for Pb2+, but also for Hg2+ and Cd2+ from a mixture of Pb2+, Hg2+, Cd2+, Co2+, Fe3+, Zn2+, Mg2+, and Na+ metal ions. This result gives us confidence that the polymer material can solve the pollution problem caused by various metal ions.

Coumarin-Caged Compounds of 1-Naphthaleneacetic Acid as Light-Responsive Controlled-Release Plant Root Stimulators.

Six coumarin-caged compounds of 1-naphthaleneacetic acid (NAA) comprising different substituents on the coumarin moiety were synthesized and evaluated for their photophysical and chemical properties as light-responsive controlled-release plant root stimulators. The 1H NMR and HPLC techniques were used to verify the release of NAA from the caged compounds. After irradiation at 365 nm, the caged compounds exhibited the fastest release rate at t1/2 of 6.7 days and the slowest release rate at t1/2 of 73.7 days. Caged compounds at high concentrations (10-5 and 10-6 M) significantly stimulate secondary root germination while free NAA at the same level is toxic and leads to inhibition of secondary root germination. The cytotoxicity of the caged compounds against fibroblasts and vero cells were evaluated, and the results suggested that, at 10-5-10-6 M, caged compounds exhibited no significant cytotoxicity to the cells. Thus, the caged compounds of NAA in this study could be of great benefit as efficient agrochemicals.

A nanostructured porous carbon/MoO2 composite with efficient catalysis in polysulfide conversion for lithium-sulfur batteries.

Lithium-sulfur batteries are considered as the next generation of energy storage systems because of their high theoretical specific capacity and energy density. Unfortunately, the sluggish reaction kinetics, weak adsorption toward to lithium polysulfides, and slow lithium ion diffusion impede the smooth electrochemical process, resulting in the lithium-sulfur batteries with the unsatisfactory cycling stability and rate performance. Since it is recognized that polar metal oxides and doped nitrogen in carbon materials have chemical interaction with lithium polysulfides, a nanostructured nitrogen-doped porous carbon/MoO2 composite is synthesized through a simple hydrothermal method by using graphene oxide nanoribbon and phosphomolybdic acid hydrate as precursors. The porous nanostructure promotes the charge and mass transport, while MoO2 nanoparticles immobilize lithium polysulfides via strong chemisorption and enhance the redox kinetics of polysulfides owing to the efficient catalytic activity in liquid-solid boundary. Consequently, the as-obtained nanostructured porous carbon/MoO2-based sulfur cathode exhibits low polarization, high initial discharge capacity (1403 mAh g-1 at 0.1 C), good rate capabilities (584 mAh g-1 at 4 C), and impressive cycling performance at 1 C (503 mAh g-1 after 500 cycles with capacity fade rate of 0.07% per cycle).

Ultrafine SnO2 nanoparticles anchored on N, P-doped porous carbon as anodes for high performance lithium-ion and sodium-ion batteries.

An ultrafine tin dioxide/N, P-doped porous carbon (SnO2/NPPC) nanocomposite is prepared through in-situ growth of tin dioxide (SnO2) nanoparticles in N, P-doped porous carbon (NPPC). Owing to the in-situ growth method, the size of SnO2 nanoparticles in SnO2/NPPC is quite small and uniform (generally less than 5.0 nm). NPPC provides a support and a conductive carbon skeleton for the SnO2 nanoparticles. The small SnO2 nanoparticles are less likely to aggregate during the discharge-charge process due to the presence of Sn-O-C bonding and nanoconfinement effect of SnO2 nanoparticles in carbon matrix. The N and P doping can provide abundant defects to facilitate the penetration of Li+ or Na+ into the interior of the electrode. In addition, the presence of Sn-N bonding can further improve the electrochemical properties of the electrodes. Thus, as an anode material for lithium-ion batteries, SnO2/NPPC possesses an enhanced rate performance, an excellent cycling stability, and a high initial Coulombic efficiency. The structure of the ultrafine SnO2 nanoparticles is well maintained in cycled SnO2/NPPC. Meanwhile, SnO2/NPPC also possesses good electrochemical performance as an anode for sodium-ion batteries. The good electrochemical properties for SnO2/NPPC materials can be ascribed to the synergetic effect between small SnO2 nanoparticles and NPPC.

Investigating the Electrocatalysis of a Ti3C2/Carbon Hybrid in Polysulfide Conversion of Lithium-Sulfur Batteries.

Despite the fact that lithium-sulfur batteries are regarded as promising next-generation rechargeable battery systems owning to high theoretical specific capacity (1675 mA h g-1) and energy density (2600 W h kg-1), several issues such as poor electrical conductivity, sluggish redox kinetics, and severe "shuttle effect" in electrodes still hinder their practical application. MXenes, novel two-dimensional materials with high conductivity, regulable interlayer spacing, and abundant functional groups, are widely applied in energy storage and conversion fields. In this work, a Ti3C2/carbon hybrid with expanded interlayer spacing is synthesized by one-step heat treatment in molten potassium hydroxide. The subsequent experiments indicate that the as-prepared Ti3C2/carbon hybrid can effectively regulate polysulfide redox conversion and has strong chemisorption interaction to polysulfides. Consequently, the Ti3C2/carbon-based sulfur cathode boosts the performance in working lithium-sulfur batteries, in terms of an ultrahigh initial discharge capacity (1668 mA h g-1 at 0.1 C), an excellent rate performance (520 mA h g-1 at 5 C), and an outstanding capacity retention of 530 mA h g-1 after 500 cycles at 1 C with a low capacity fade rate of 0.05% per cycle and stable Coulombic efficiency (nearly 99%). The above results indicate that this composite with high catalytic activity is a potential host material for further high-performance lithium-sulfur batteries.