Efficient photodegradation of perfluoroalkyl substances under visible light by hexagonal ZnIn2S4 nanosheets.

Perfluoroalkyl substances (PFASs) are typical persistent organic pollutants, and their removal is urgently required but challenging. Photocatalysis has shown potential in PFASs degradation due to the redox capabilities of photoinduced charge carriers in photocatalysts. Herein, hexagonal ZnIn2S4 (ZIS) nanosheets were synthesized by a one-pot oil bath method and were well characterized by a series of techniques. In the degradation of sodium p-perfluorous nonenoxybenzenesulfonate (OBS), one kind of representative PFASs, the as-synthesized ZIS showed activity superior to P25 TiO2 under both simulated sunlight and visible-light irradiation. The good photocatalytic performance was attributed to the enhanced light absorption and facilitated charge separation. The pH conditions were found crucial in the photocatalytic process by influencing the OBS adsorption on the ZIS surface. Photogenerated e- and h+ were the main active species involved in OBS degradation in the ZIS system. This work confirmed the feasibility and could provide mechanistic insights into the degradation and defluorination of PFASs by visible-light photocatalysis.

Distribution characteristics, source analysis and ecological risk assessment of polycyclic aromatic hydrocarbons in surface sediments from the western Honghai Bay of China.

The distribution characteristics and risk levels of PAHs in surface sediment in the Honghai Bay of China are studied in this paper. The results showed that the concentration of total PAHs in this area ranged from 100.65 ng·g-1 to 241.31 ng·g-1, with an average concentration of 158.83 ng·g-1. The tricyclic PAHs were the main components in the detected PAHs. PAH pollution levels in this region were low and moderate as compared with adjacent areas. Traceability results showed that the sediment PAHs mainly originate from coal and biomass combustion. PAHs concentrations at some stations were above the Environmental Quality Reference Level. The PAHs toxicity and ecological risk level in surface sediments in the area was determined to be low to moderate by toxicity equivalence testing and risk entropy value assessment.

Light-Modulated Humidity Sensing in Spiropyran Functionalized MoS2 Transistors.

The optically tuneable nature of hybrid organic/inorganic heterostructures tailored by interfacing photochromic molecules with 2D semiconductors (2DSs) can be exploited to endow multi-responsiveness to the exceptional physical properties of 2DSs. In this study, a spiropyran-molybdenum disulfide (MoS2) light-switchable bi-functional field-effect transistor is realized. The spiropyran-merocyanine reversible photo-isomerization has been employed to remotely control both the electron transport and wettability of the hybrid structure. This manipulation is instrumental for tuning the sensitivity in humidity sensing. The hybrid organic/inorganic heterostructure is subjected to humidity testing, demonstrating its ability to accurately monitor relative humidity (RH) across a range of 10%-75%. The electrical output shows good sensitivity of 1.0% · (%) RH-1. The light-controlled modulation of the sensitivity in chemical sensors can significantly improve their selectivity, versatility, and overall performance in chemical sensing.

Rational Design and Fine Fabrication of Passive Daytime Radiative Cooling Textiles Integrate Antibacterial, UV-Shielding, and Self-Cleaning Characteristics.

Passive daytime radiative cooling (PDRC) textiles hold substantial potential for localized outdoor cooling of the human body without additional energy consumption, but their limited multifunctional integration severely hinders their practical application. Herein, aluminum-doped zinc oxide (AZO) nanoparticles were purposefully introduced into poly(vinylidene fluoride) (PVDF) nanofibers via a facile electrospinning process, forming a large-scale and flexible PDRC textile with the desired antibacterial, UV-shielding, and self-cleaning capabilities. These prepared PDRC textiles present a weighted sunlight reflection rate of 92.3% and a weighted emissivity of 89.5% in the mid-infrared region. Furthermore, outdoor tests with an average solar intensity of ∼715 W/m2 demonstrated that a skin simulator temperature could be cooled by ∼16.1 °C below the ambient temperature, outperforming cotton fabric by ∼6.3 °C. Owing to the outstanding photocatalytic properties of the AZO nanoparticles, these prepared PVDF textiles exhibit antibacterial properties (Escherichia coli: 99.99%), UV-shielding performance (UPF > 50+), and superior self-cleaning capabilities, providing a cost-effective and eco-friendly avenue for daytime personal thermal management.

PM2.5-mediated cardiovascular disease in aging: Cardiometabolic risks, molecular mechanisms and potential interventions.

Air pollution, particularly fine particulate matter (PM2.5) with <2.5 µm in diameter, is a major public health concern. Studies have consistently linked PM2.5 exposure to a heightened risk of cardiovascular diseases (CVDs) such as ischemic heart disease (IHD), heart failure (HF), and cardiac arrhythmias. Notably, individuals with pre-existing age-related cardiometabolic conditions appear more susceptible. However, the specific impact of PM2.5 on CVDs susceptibility in older adults remains unclear. Therefore, this review addresses this gap by discussing the factors that make the elderly more vulnerable to PM2.5-induced CVDs. Accordingly, we focused on physiological aging, increased susceptibility, cardiometabolic risk factors, CVDs, and biological mechanisms. This review concludes by examining potential interventions to reduce exposure and the adverse health effects of PM2.5 in the elderly population. The latter includes dietary modifications, medications, and exploration of the potential benefits of supplements. By comprehensively analyzing these factors, this review aims to provide a deeper understanding of the detrimental effects of PM2.5 on cardiovascular health in older adults. This knowledge can inform future research and guide strategies to protect vulnerable populations from the adverse effects of air pollution.

Distribution and provenance analysis of polycyclic aromatic hydrocarbons in surface sediments of the East China Sea.

A total of 32 surface sediment samples were collected from the East China Sea (ECS) to investigate the distribution of polycyclic aromatic hydrocarbons (PAHs) in the surface sediments and evaluate their sources. The content of PAHs in the ECS surface sediments ranged from 2.3 ng/g to 57.8 ng/g. The source analysis revealed that the combustion of such fuels as petroleum is the main contribution source of PAHs in the ECS surface sediments, and oil spill is another important contribution source. The study also showed that the content of PAHs in the ECS surface sediments is low and does not cause adverse ecological risks.

Associations of multiple serum metals with the risk of metabolic syndrome among the older population in China based on a community study: A mediation role of peripheral blood cells.

Metal exposure has been reported to be associated with metabolic syndrome (MetS), however, the evidence remains inconclusive, particularly in elderly individuals. From May to July 2016, serum levels of 16 metals were measured using inductively coupled plasma mass spectrometry (ICP-MS) in 852 elderly individuals (≥65 years) residing in Wuhan, China. Biological detection and disease recognition were based on individual surveys conducted during health check-ups. Spearman's rank correlation analysis was performed to identify the correlation among serum metals. The data were Ln-transformed to fit a normal distribution for further analyses. Linear and logistic regression were applied to explore the associations between metals and diseases. Restricted cubic spline (RCS) analysis was utilized to examine dose-response relationships. The Weighted Quantile Sum (WQS) score was applied to determine the empirical weights of each heavy metal in the context of their combined effect on metabolic diseases. The prevalence of MetS, hypertension, diabetes, and hyperlipidemia were 46.36 %, 68.90 %, 24.65 %, and 21.60 %, respectively. Serum metal mixture was positively associated with the prevalence of MetS (OR = 1.92, 95 % CI: 1.30-2.82), hypertension (OR = 1.50, 95 % CI: 1.01-2.23), and diabetes (OR = 2.18, 95 % CI: 1.48-3.22). In single metal models, we found that serum zinc levels were associated with an increased risk of MetS, while rubidium had a protective effect against MetS. Interestingly, different metals had distinct effects on specific diseases in this study: lithium and barium were more likely to influence blood pressure, while selenium had a more significant effect on blood glucose. Lipids were more susceptible to the effects of zinc, selenium, and strontium. Platelet count (PLT) and lymphocyte count (LYM) mediated the association between selenium exposure and hyperlipidemia, while neutrophil count (NEU) mediated the relationship between serum rubidium exposure and MetS. Our findings offer valuable etiological insights into the relationship between serum heavy metals and the prevalence of MetS, suggesting that peripheral blood cells may play a mediating role in this association.

Metformin increases gut multidrug resistance genes in type 2 diabetes, potentially linked to Escherichia coli.

Metformin is the most commonly prescribed medication for treating type 2 diabetes (T2D). It is known that metformin can alter the gut microbiome, which influences the effectiveness of metformin treatment. We posited that if the gut microbiome, a reservoir of the resistome, is altered, then the resistome should change as well. To test this hypothesis, we reanalyzed microbiome data generated by Wu et al. (Nat Med 23(7):850-858, 2017), identifying antibiotic resistance genes (ARGs) and bacterial species. Through read-based analysis, we observed that the abundance of ARGs indeed changed in many samples treated with metformin. Moreover, the altered pattern was sufficiently heterogeneous across individual samples to allow subcategorization. We also found a strong correlation between the abundance of multidrug-resistant ARGs (MDR-ARGs) and the presence of E. coli. The contig-based analysis led to the same conclusion: an increase in MDR-ARGs due to metformin was associated with an increase in E. coli. In relation to this, we were able to confirm that the majority of MDR-ARGs are likely to originate from E. coli. These results suggest that metformin may have the potential side effect of increasing E. coli carrying ARGs, particularly MDR-ARGs, which could be a concern in T2D therapy that relies on metformin.

Highly selective removal of thallous ions from wastewater using Prussian Blue biochar composite.

Thallium, a highly toxic pollutant, shows greater toxicity to human than other common heavy metals such as mercury, lead, cadmium and its effective removal from wastewater gains great attention. The main restriction for the Tl+ removal is the interference of a high concentration of co-existing ions in wastewater. Therefore, the goal of the current work was to synthesis adsorbent with high selectivity for the Tl+ removal. Herein, the pore size sieving strategy was proposed and Prussian blue-impregnated biochar (BC@PB) particles was synthesized. More than 95% Tl+ can be removed even the concentrations of the coexistence ions (Na+, Cd2+, and Zn2+) 1,000 higher than the initial concentration of Tl+ (500 µg/L). BC@PB also showed large adsorption capacity (9365 µg/g) and more than 99% Tl+ (initial concentration, 500 µg/L) were removed in just 1 min. The BC@PB had excellent and stable Tl+ removal ability (> 99%) over a range of pH from 3 to 9, which covered the pH range of common thallium-containing wastewater. The density functional theory (DFT) calculation confirmed that not only hydrated volume but also the hydration free energy of ions, which governed the energy barrier for ions entering into narrow channels of BC@PB, played essential roles on the selectivity removal of Tl+. Overall, due to its high selectivity, high adsorption capacity and easy preparation process, the synthesized BC@PB particles based on the pore sizing sieving strategy, can be a promising candidate for the removal of thallium from wastewater.

Recent advances in developing nanoscale electro-/photocatalysts for hydrogen production: modification strategies, charge-carrier characterizations, and applications.

For clean hydrogen (H2) production, electrocatalysis and photocatalysis are widely regarded as promising technologies to counter the increasing energy crisis. However, developing applicable catalysts with high H2 production performances still poses a challenge. In this review, state-of-the-art nanoscale electrocatalysts for water electrolysis and photocatalysts for water splitting, tailored for different reaction environments, including acidic electrolytes, alkaline electrolytes, pure water, seawater, and hydrohalic acids, are systematically presented. In particular, modification approaches such as doping, morphology control, heterojunction/homojunction construction, as well as the integration of cocatalysts and single atoms for efficient charge transfer and separation are examined. Furthermore, the unique properties of these upgraded catalysts and the mechanisms of promoted H2 production are also analyzed by elucidating the charge carrier dynamics revealed by photophysical and photoelectrochemical characterization methods. Finally, perspectives and outlooks on future developments for H2 production using advanced electrocatalysts and photocatalysts are proposed.

Seasonal variations and the prevalence of phenolic profiles in ambient fine particulate matter and their impact on oxidative potential.

Exposure to fine particulate matter (PM2.5) poses numerous health risks, with oxidative potential (OP) serving as a critical marker of its toxicity. Synthetic phenolic antioxidants (SPAs) and bisphenols (BPs) influence reactive oxygen species (ROS) levels in PM2.5, and exposure to these compounds induces oxidative stress in organisms, thereby potentially affecting the OP of PM2.5. We detected 26 phenols (including 12 SPAs, 5 transformation products (TPs), and 9 BPs) in PM2.5 sample collected from October 2018 to September 2021 in Wuhan, China. Among them, 19 substances were detected at a detection frequency greater than 50 % in PM2.5 sample. AO 2246 and BHT were the main components of SPAs, and BHT-Q and BPA had the highest concentrations in TPs and BPs, respectively. PM2.5 mass concentrations and phenolic levels were higher in winter and autumn. Substances within groups were strongly correlated, suggesting the same or similar source of exposure. This finding aid in more precise pollution source identification and is crucial for comprehensively evaluating their combined health effects. Furthermore, we determined the OP of PM2.5 and found that BPs were related to increased OP and ROS. This suggests that the toxicity of PM2.5 is influenced not only by its concentration but also by its chemical composition, with BPs potentially enhancing its toxic effects. These factors should be fully considered when assessing the health impacts of PM2.5.

Non-Hodgkin's lymphoma involving chronic difficult-to-heal wounds: A case report.

BACKGROUND: Non-Hodgkin's lymphoma (NHL) is a malignant tumor that originates from the lymphoid tissues and can potentially affect numerous organs within the body. Among these, the skin stands out as one of the primary sites affected by NHL, often presenting with multiple extra-nodal manifestations. In this report, we present an unusual case of NHL involving chronic wounds in the lower extremities that were difficult to heal. The scars were successfully treated using radiotherapy in combination with extended excision debridement and peroneal artery perforator flap grafting, resulting in satisfactory outcomes. CASE SUMMARY: A 19-year-old male patient presented with ulceration of the skin on the left calf near the ankle accompanied by purulent discharge. Subsequent pathologic biopsy confirmed a diagnosis of NHL (extranodal NK/T-cell lymphoma, nasal type). Initial treatment comprised local radiotherapy and wound care; however, the wound exhibited prolonged non-healing. Consequently, the patient underwent a series of interventions including radiotherapy, wound enlargement excision debridement, and peroneal artery perforator flap grafting. Ultimately, successful healing was achieved with favorable postoperative outcomes characterized by good texture of the flap without any signs of rupture or infection. CONCLUSION: The combination of radiotherapy, wound enlargement excision debridement, and peroneal artery perforator flap grafting may present a favorable treatment modality for chronic non-healing lower leg wounds resulting from NHL.

Engineering the Interfacing of Molecules with 2D Transition Metal Dichalcogenides: Enhanced Multifunctional Electronics.

ConspectusEngineering all interfaces between different components in electronic devices is the key to control and optimize fundamental physical processes such as charge injection at metal-semiconductor interfaces, gate modulation at the dielectric-semiconductor interface, and carrier modulation at semiconductor-environment interfaces. The use of two-dimensional (2D) crystals as semiconductors, by virtue of their atomically flat dangling bond-free structures, can facilitate the tailoring of such interfaces effectively. In this context, 2D transition metal dichalcogenides (TMDs) have garnered tremendous attention over the past two decades owing to their exclusive and outstanding physical and chemical characteristics such as their strong light-matter interactions and high charge mobility. These properties position them as promising building blocks for next-generation semiconductor materials. The combination of their large specific surface area, unique electronic structure, and properties highly sensitive to environmental changes makes 2D TMDs appealing platforms for applications in optoelectronics and sensing. While a broad arsenal of TMDs has been made available that exhibit a variety of electronic properties, the latter are unfortunately hardly tunable. To overcome this problem, the controlled functionalization of TMDs with molecules and assemblies thereof represents a most powerful strategy to finely tune their surface characteristics for electronics. Such functionalization can be used not only to encapsulate the electronic material, therefore enhancing its stability in air, but also to impart dynamic, stimuli-responsive characteristics to TMDs and to selectively recognize the presence of a given analyte in the environment, demonstrating unprecedented application potential.In this Account, we highlight the most enlightening recent progress made on the interface engineering in 2D TMD-based electronic devices via covalent and noncovalent functionalization with suitably designed molecules, underlining the remarkable synergies achieved. While electrode functionalization allows modulating charge injection and extraction, the functionalization of the dielectric substrate enables tuning of the carrier concentration in the device channel, and the functionalization of the upper surface of 2D TMDs allows screening the interaction with the environment and imparts molecular functionality to the devices, making them versatile for various applications. The tailored interfaces enable enhanced device performance and open up avenues for practical applications. This Account specifically focuses on our recent endeavor in the unusual properties conferred to 2D TMDs through the functionalization of their interfaces with stimuli-responsive molecules or molecular assemblies. This includes electrode-functionalized devices with modulable performance and charge carriers, molecular-bridged TMD network devices with overall enhanced electrical properties, sensor devices that are highly responsive to changes in the external environment, in particular, electrochemically switchable transistors that react to external electrochemical signals, optically switchable transistors that are sensitive to external light inputs, and multiresponsive transistors that simultaneously respond to multiple external stimuli including optical, electrical, redox, thermal, and magnetic inputs and their application in the development of unprecedented memories, artificial synapses, and logic inverters. By presenting the current challenges, opportunities, and prospects in this blooming research field, we will discuss the powerful integration of such strategies for next-generation electronic digital devices and logic circuitries, outlining future directions and potential breakthroughs in interface engineering.

Unlocking the mystery of heterosis opens the era of intelligent rice breeding.

Heterosis refers to the phenomenon where the first filial offspring (F1) from genetically diverse parents displays advantages in growth rate, yield and adaptability compared to its parents. The exploitation of heterosis in rice breeding has greatly increased the productivity, making a significant contribution to food security in the last half of century. Conventional hybrid rice breeding highly relies on the breeder's experience on random crossing and comprehensive field selection. This process is time-consuming and labor-intensive. In recent years, rice hybrid breeding has encountered challenges stemming from limited germplasm resource, low breeding efficiency and high uncertainty, which constrain the progress in yield increase, coupled with difficulties in balancing grain yield, quality and resistance. Understanding the genetic basis of rice heterosis could lead to significant advances in breeding concepts and methods. This will fully unleash the advantages of heterosis. In this review, we focus on the research progress of the genetic dissection of crop heterosis, and introduce briefly on some key advancements in modern intelligence breeding of rice hybrid.

Aggregate-Dominated Dilute Electrolytes with Low-Temperature-Resistant Ion-Conducting Channels for Highly Reversible Na Plating/Stripping.

Developing rechargeable batteries with high power delivery at low temperatures (LT) below 0 °C is significant for cold-climate applications. Initial anode-free sodium metal batteries (AFSMBs) promise high LT performances because of the low de-solvation energy and smaller Stokes radius of Na+, nondiffusion-limited plating/stripping electrochemistry, and maximized energy density. However, the severe reduction in electrolyte ionic conductivity and formation of unstable solid electrolyte interphase (SEI) hinder their practical applications at LT. In this study, a 2-methyltetrahydrofuran-based dilute electrolyte is designed to concurrently achieve an anion-coordinated solvation structure and impressive ionic conductivity of 3.58 mS cm-1 at -40 °C. The dominant aggregate solvates enable the formation of highly efficient and LT-resistant Na+ hopping channels in the electrolyte. Moreover, the methyl-regulated electronic structure in 2-methyltetrahydrofuran induces gradient decomposition toward an inorganic-organic bilayer SEI with high Na+ mobility, composition homogeneity, and mechanical robustness. As such, a record-high Coulombic efficiency beyond 99.9% is achieved even at -40 °C. The as-constructed AFSMBs sustain 300 cycles with 80% capacity maintained, and a 0.5-Ah level pouch cell delivers 85% capacity over 180 cycles at -25 °C. This study affords new insights into electrolyte formulation for fast ionic conduction and superior Na reversibility at ultralow temperatures.

Auto-delineation of treatment target volume for radiation therapy using large language model-aided multimodal learning.

PURPOSE: Artificial intelligence (AI)-aided methods have made significant progress in the auto-delineation of normal tissues. However, these approaches struggle with the auto-contouring of radiotherapy target volume. Our goal is to model the delineation of target volume as a clinical decision-making problem, resolved by leveraging large language model-aided multimodal learning approaches. METHODS AND MATERIALS: A vision-language model, termed Medformer, has been developed, employing the hierarchical vision transformer as its backbone, and incorporating large language models to extract text-rich features. The contextually embedded linguistic features are seamlessly integrated into visual features for language-aware visual encoding through the visual language attention module. Metrics, including Dice similarity coefficient (DSC), intersection over union (IOU), and 95th percentile Hausdorff distance (HD95), were used to quantitatively evaluate the performance of our model. The evaluation was conducted on an in-house prostate cancer dataset and a public oropharyngeal carcinoma (OPC) dataset, totaling 668 subjects. RESULTS: Our Medformer achieved a DSC of 0.81 ± 0.10 versus 0.72 ± 0.10, IOU of 0.73 ± 0.12 versus 0.65 ± 0.09, and HD95 of 9.86 ± 9.77 mm versus 19.13 ± 12.96 mm for delineation of gross tumor volume (GTV) on the prostate cancer dataset. Similarly, on the OPC dataset, it achieved a DSC of 0.77 ± 0.11 versus 0.72 ± 0.09, IOU of 0.70 ± 0.09 versus 0.65 ± 0.07, and HD95 of 7.52 ± 4.8 mm versus 13.63 ± 7.13 mm, representing significant improvements (p < 0.05). For delineating the clinical target volume (CTV), Medformer achieved a DSC of 0.91 ± 0.04, IOU of 0.85 ± 0.05, and HD95 of 2.98 ± 1.60 mm, comparable to other state-of-the-art algorithms. CONCLUSIONS: Auto-delineation of the treatment target based on multimodal learning outperforms conventional approaches that rely purely on visual features. Our method could be adopted into routine practice to rapidly contour CTV/GTV.

Large-Scale Mechanochemical Synthesis of Cesium Lanthanide Chloride for Radioluminescence.

Cesium lanthanide chloride (Cs3LnCl6), a recently developed class of lanthanide-based zero-dimensional metal halides, has garnered a significant amount of interest because of its potential applications in scintillators, light-emitting diodes, and photodetectors. Although cesium lanthanide chloride demonstrates exceptional scintillator properties, conventional synthesis methods involving solid-state and solution-phase techniques are complex and limited on the reaction scale. This study presents a facile mechanochemical synthesis method for producing Cs3CeCl6, Cs3TbCl6, and Cs3EuCl6 metal halides on a 5 g scale. These materials exhibit intense blue-violet, green, and red emissions upon ultraviolet excitation, with high photoluminescence quantum yields ranging from 54% to 93%. Furthermore, Cs3CeCl6, Cs3TbCl6, and Cs3EuCl6 metal halides exhibit intense radioluminescence spanning from the ultraviolet to the visible region. This research shows the potential of the scalable mechanochemical synthesis of lanthanide-based metal halides for the advancement of luminescent materials for scintillators.

Prognostic Value of Optic Nerve Sheath Diameters after Acute Ischemic Stroke According to Slice Thickness on Computed Tomography.

The optic nerve sheath diameter (ONSD) can predict intracranial pressure and outcomes in neurological disease, but it remains unclear whether a small ONSD can be accurately measured on routine CT images with a slice thickness of approximately 4-5 mm. We measured the ONSD and ONSD/eyeball transverse diameter (ETD) ratio on routine-slice (4 mm) and thin-slice (0.6-0.75 mm) brain CT images from initial scans of acute ischemic stroke (AIS) patients. ONSD-related variables, National Institutes of Health Stroke Scale (NIHSS) scores, and age were compared between good (modified Rankin Scale [mRS] ≤ 2) and poor (mRS > 2) outcomes at discharge. Among 155 patients, 38 had poor outcomes. The thin-slice ONSD was different between outcome groups (p = 0.047), while the routine-slice ONSD showed no difference. The area under the curve (AUC) values for the ONSD and ONSD/ETD were 0.58 (95% CI, 0.49-0.66) and 0.58 (95% CI, 0.50-0.66) on the routine-slice CT, and 0.60 (95% CI, 0.52-0.68) and 0.62 (95% CI, 0.54-0.69) on the thin-slice CT. The thin-slice ONSD/ETD ratio correlated with initial NIHSS scores (r = 0.225, p = 0.005). After adjusting for NIHSS scores and age, ONSD-related variables were not associated with outcomes, and adding them to a model with NIHSS scores and age did not improve performance (all p-values > 0.05). Although ONSD measurements were not an independent outcome predictor, they correlated with stroke severity, and the thin-slice ONSD provided a slightly better prognostic performance than the routine-slice ONSD.

Enhanced efficacy of glycoengineered rice cell-produced trastuzumab.

For several decades, a plant-based expression system has been proposed as an alternative platform for the production of biopharmaceuticals including therapeutic monoclonal antibodies (mAbs), but the immunogenicity concerns associated with plant-specific N-glycans attached in plant-based biopharmaceuticals has not been completely solved. To eliminate all plant-specific N-glycan structure, eight genes involved in plant-specific N-glycosylation were mutated in rice (Oryza sativa) using the CRISPR/Cas9 system. The glycoengineered cell lines, PhytoRice®, contained a predominant GnGn (G0) glycoform. The gene for codon-optimized trastuzumab (TMab) was then introduced into PhytoRice® through Agrobacterium co-cultivation. Selected cell lines were suspension cultured, and TMab secreted from cells was purified from the cultured media. The amino acid sequence of the TMab produced by PhytoRice® (P-TMab) was identical to that of TMab. The inhibitory effect of P-TMab on the proliferation of the BT-474 cancer cell line was significantly enhanced at concentrations above 1 µg/mL (****P < 0.0001). P-TMab bound to a FcγRIIIa variant, FcγRIIIa-F158, more than 2.7 times more effectively than TMab. The ADCC efficacy of P-TMab against Jurkat cells was 2.6 times higher than that of TMab in an in vitro ADCC assay. Furthermore, P-TMab demonstrated efficient tumour uptake with less liver uptake compared to TMab in a xenograft assay using the BT-474 mouse model. These results suggest that the glycoengineered PhytoRice® could be an alternative platform for mAb production compared to current CHO cells, and P-TMab has a novel and enhanced efficacy compared to TMab.

Genomic investigation of 18,421 lines reveals the genetic architecture of rice.

Understanding how numerous quantitative trait loci (QTL) shape phenotypic variation is an important question in genetics. To address this, we established a permanent population of 18,421 (18K) rice lines with reduced population structure. We generated reference-level genome assemblies of the founders and genotyped all 18K-rice lines through whole-genome sequencing. Through high-resolution mapping, 96 high-quality candidate genes contributing to variation in 16 traits were identified, including OsMADS22 and OsFTL1 verified as causal genes for panicle number and heading date, respectively. We identified epistatic QTL pairs and constructed a genetic interaction network with 19 genes serving as hubs. Overall, 170 masking epistasis pairs were characterized, serving as an important factor contributing to genetic background effects across diverse varieties. The work provides a basis to guide grain yield and quality improvements in rice.