Antiadhesive Copolymers at Solid/Liquid Interfaces: Complementary Characterization of Polymer Adsorption and Protein Fouling by Sum Frequency Generation Vibrational Spectroscopy and Quartz-Crystal Microbalance Measurements with Dissipation Monitoring.

Amphiphilic copolymers comprising hydrophilic segments of poly(ethylene glycol) and hydrophobic domains that are able to adhere to solid/liquid interfaces have proven to be versatile ingredients in formulated products for various types of applications. Recently, we have reported the successful synthesis of a copolymer designed for modifying the surface properties of polyesters as mimics for synthetic textiles. Using sum frequency generation (SFG) spectroscopy, it was shown that the newly developed copolymer adsorbs effectively on the targeted substrates even in the presence of surfactants as supplied by common detergents. In the present work, these studies were extended to evaluate the ability of the formed copolymer adlayers to passivate polyester surfaces against undesired deposition of bio(macro)molecules, as represented by fibrinogen as model protein foulants. In addition, SFG spectroscopy was used to elucidate the structure of fibrinogen at the interface between polyester and water. To complement the obtained data with an independent technique, analogous experiments were performed using quartz-crystal microbalance with dissipation monitoring for the detection of the relevant interfacial processes. Both methods give consistent results and deliver a holistic picture of brush copolymer adsorption on polyester surfaces and subsequent antiadhesive effects against proteins under different conditions representing the targeted application in home care products.

Probing Interfacial Behavior and Antifouling Activity of Adsorbed Copolymers at Solid/Liquid Interfaces.

Polymers containing poly(ethylene glycol) (PEG) units can exhibit excellent antifouling properties, which have been proposed/used for coating of biomedical implants, separation membranes, and structures in marine environments, as well as active ingredients in detergent formulations to avoid soil redepositioning in textile laundry. This study aimed to elucidate the molecular behavior of a copolymer poly(MMA-co-MPEGMA) containing antiadhesive PEG side chains and a backbone of poly(methyl methacrylate), at a buried polymer/solution interface. Polyethylene terephthalate (PET) was used as a substrate to model polyester textile surfaces. Sum frequency generation (SFG) vibrational spectroscopy was applied to examine the interfacial behavior of the copolymer at PET/solution interfaces in situ and in real time. Complementarily, copolymer adsorption on PET and subsequent antiadhesion against protein foulants were probed by quartz-crystal microbalance experiments with dissipation monitoring (QCM-D). Both applied techniques show that poly(MMA-co-MPEGMA) adsorbs significantly to the PET/solution interface at bulk polymer solution concentrations as low as 2 ppm, while saturation of the surface was reached at 20 ppm. The hydrophobic MMA segments provide an anchor for the copolymer to bind onto PET in an ordered way, while the pendant PEG segments are more disordered but contain ordered interfacial water. In the presence of considerable amounts of dissolved surfactants, poly(MMA-co-MPEGMA) could still effectively adsorb on the PET surface and remained stable at the surface upon washing with hot and cold water or surfactant solution. In addition, it was found that adsorbed poly(MMA-co-MPEGMA) provided the PET surface with antiadhesive properties and could prevent protein deposition, highlighting the superior surface affinity and antifouling performance of the copolymer. The results obtained in this work demonstrate that amphiphilic copolymers containing PMMA anchors and PEG side chains can be used in detergent formulations to modify polyester surfaces during laundry and reduce deposition of proteins (and likely also other soils) on the textile.

Low-Volatility Model Demonstrates Humidity Affects Environmental Toxin Deposition on Plastics at a Molecular Level.

Despite the ever-increasing prevalence of plastic debris and endocrine disrupting toxins in aquatic ecosystems, few studies describe their interactions in freshwater environments. We present a model system to investigate the deposition/desorption behaviors of low-volatility lake ecosystem toxins on microplastics in situ and in real time. Molecular interactions of gas-phase nonylphenols (NPs) with the surfaces of two common plastics, poly(styrene) and poly(ethylene terephthalate), were studied using quartz crystal microbalance and sum frequency generation vibrational spectroscopy. NP point sources were generated under two model environments: plastic on land and plastic on a freshwater surface. We found the headspace above calm water provides an excellent environment for NP deposition and demonstrate significant NP deposition on plastic within minutes at relevant concentrations. Further, NP deposits and orders differently on both plastics under humid versus dry environments. We attributed the unique deposition behaviors to surface energy changes from increased water content during the humid deposition. Lastly, nanograms of NP remained on microplastic surfaces hours after initial NP introduction and agitating conditions, illustrating feasibility for plastic-bound NPs to interact with biota and surrounding matter. Our model studies reveal important interactions between low-volatility environmental toxins and microplastics and hold potential to correlate the environmental fate of endocrine disrupting toxins in the Great Lakes with molecular behaviors.

The molecular interfacial structure and plasticizer migration behavior of "green" plasticized poly(vinyl chloride).

Tributyl acetyl citrate (TBAC), a widely-used "green" plasticizer, has been extensively applied in products for daily use. In this paper, a variety of analytical tools including sum frequency generation vibrational spectroscopy (SFG), coherent anti-Stokes Raman spectroscopy (CARS), contact angle goniometry (CA), and Fourier transform infrared spectroscopy (FTIR) were applied together to investigate the molecular structures of TBAC plasticized poly(vinyl chloride) (PVC) and the migration behavior of TBAC from PVC-TBAC mixtures into water. We comprehensively examine the effects of oxygen and argon plasma treatments on the surface structures of PVC-TBAC thin films containing various bulk percentages of plasticizers and the leaching behavior of TBAC into water. It was found that TBAC is a relatively stable PVC plasticizer compared to traditional non-covalent plasticizers but is also surface active. Oxygen plasma treatment increased the hydrophilicity of TBAC-PVC surfaces, but did not enhance TBAC leaching. However, argon plasma treatment greatly enhanced the leaching of TBAC molecules from PVC plastics to water. Based on our observations, we believe that oxygen plasma treatment could be applied to TBAC plasticized PVC products to enhance surface hydrophilicity for improving the biocompatibility and antibacterial properties of PVC products. The structural information obtained in this study will ultimately facilitate a molecular level understanding of plasticized polymers, aiding in the design of PVC materials with improved properties.

Interfacial molecular restructuring of plasticized polymers in water.

Upon water contact, phthalate-plasticized poly(vinyl chloride) (PVC) surfaces are highly unstable because the plasticizer molecules are not covalently bound to the polymer network. As a result, it is difficult to predict how the surface polymer chains and plasticizers may interact with water without directly probing the plastic/water interface in situ. We successfully studied the molecular surface restructuring of 10 wt% and 25 wt% bis 2-ethylhexyl phthalate (DEHP)-plasticized and pure PVC films (deposited on solid substrates) in situ due to water contact using sum frequency generation (SFG) vibrational spectroscopy. SFG spectral signals from both the top and the bottom of the plastic film were obtained simultaneously, so a thin-film model spectral analysis was applied to separately identify the molecular changes of plastics at the surface and the plastic/substrate interface in water. It was found that in water both the structures of the plastic surface and the buried plastic/substrate interface changed. After removing the samples from the water and exposing them to air again, the surface structures did not completely recover. Further SFG experiments confirmed that small amounts of DEHP were transferred into the water. The leached DEHP molecules could reorder and permanently transfer to new surfaces through water contact. Our studies indicate that small amounts of phthalates can transfer from surface to surface through water contact in an overall scope of minutes. This study yields vital new information on the molecular surface structures of DEHP plasticized PVC in water, and the transfer behaviors and environmental fate of plasticizers in polymers.

Molecular structural changes of plasticized PVC after UV light exposure.

Plasticized poly(vinyl chloride) (PVC) materials for industrial, medical, and household use are often intentionally exposed to UV light, though its impact on the molecular integrity and toxicity of the surface and bulk of PVC materials is still not well understood. This paper investigates the surface and bulk molecular changes of plasticized PVC films with 25, 10, or 0 wt % bis-2-ethylhexyl phthalate (DEHP) plasticizer after exposure to short wave (254 nm) or long wave (365 nm) UV light. Surface analytical techniques including sum frequency generation vibrational spectroscopy (SFG) revealed short wave UV exposure induced major molecular changes on the plasticized PVC surfaces, resulting in increased surface hydrophilicity and decreased CH3 content with increasing exposure time. Additionally, it was deduced from multiple techniques that the surface and the bulk of the plastic exposed to short wave UV contained phthalic monoesters and phthalic acid formed from multistep radical reactions. In contrast, when exposed to long wave UV, molecular content and ordering on the surfaces of the plastic remained relatively unchanged and the introduction of DEHP in plastic helped protect PVC chains from degradation. Results from this study demonstrate short wave UV exposure will result in plastic surfaces containing phthalates and phthalate-related products accessible to contact by living organisms.

Molecular surface structural changes of plasticized PVC materials after plasma treatment.

In this research, a variety of analytical techniques including sum frequency generation vibrational spectroscopy (SFG), coherent anti-Stokes Raman spectroscopy (CARS), and X-ray photoelectron spectroscopy (XPS) have been employed to investigate the surface and bulk structures of phthalate plasticized poly(vinyl chloride) (PVC) at the molecular level. Two types of phthalate molecules with different chain lengths, diethyl phthalate (DEP) and dibutyl phthalate (DBP), mixed with PVC in various weight ratios were examined to verify their different surface and bulk behaviors. The effects of oxygen and argon plasma treatment on PVC/DBP and PVC/DEP hybrid films were investigated on both the surface and bulk of films using SFG and CARS to evaluate the different plasticizer migration processes. Without plasma treatment, SFG results indicated that more plasticizers segregate to the surface at higher plasticizer bulk concentrations. SFG studies also demonstrated the presence of phthalates on the surface even at very low bulk concentration (5 wt %). Additionally, the results gathered from SFG, CARS, and XPS experiments suggested that the PVC/DEP system was unstable, and DEP molecules could leach out from the PVC under low vacuum after several minutes. In contrast, the PVC/DBP system was more stable; the migration process of DBP out of PVC could be effectively suppressed after oxygen plasma treatment. XPS results indicated the increase of C═O/C-O groups and decrease of C-Cl functionalities on the polymer surface after oxygen plasma treatment. The XPS results also suggested that exposure to argon plasma induced chemical bond breaking and formation of cross-linking or unsaturated groups with chain scission on the surface. Finally, our results indicate the potential risk of using DEP molecules in PVC since DEP can easily leach out from the polymeric bulk.

Sum frequency generation and coherent anti-Stokes Raman spectroscopic studies on plasma-treated plasticized polyvinyl chloride films.

Polyvinyl chloride (PVC) is a widely used polymer to which various phthalates are extensively applied as plasticizers. PVC materials are often treated with plasma to vary the hydrophobicity or for cleaning purposes, but little is known of the nature of the surface molecular structures after treatment. This research characterizes molecular surface structures of PVC and bis-2-ethylhexyl phthalate (DEHP)-plasticized PVC films in air before annealing, after annealing, and after exposure to air-generated glow discharge plasma using sum frequency generation (SFG) vibrational spectroscopy. In addition, we compare the vibrational molecular signatures on the surfaces of PVC with DEHP (at a variety of percent loadings) to those of the bulk detected using coherent anti-Stokes Raman scattering (CARS). X-ray photoelectron spectroscopy (XPS) and contact angle measurements have been used to analyze PVC surfaces to supplement SFG data. Our results indicate that DEHP was found on the surfaces of PVC films even at low weight percentages (5 wt %) and that DEHP segregates on surfaces after annealing. The treatment of these films with glow discharge plasma resulted in surface-sensitive reactions involving the removal of chlorine atoms, the addition of oxygen atoms, and C-H bond rearrangement. CARS data demonstrate that the bulk of our films remained undisturbed during the plasma treatment. For the first time, we probed the molecular structure of the surface and the bulk of a PVC material using combined SFG and CARS studies on the same sample in exactly the same environment. In addition, the methodology used in this research can be applied to characterize various plasticizers in a wide variety of polymer systems to understand their surface and bulk structures before and after systematic applications of heat, plasma, or other treatments.