Removal of ceftriaxone and cefotaxime antibiotics from industrial wastewater via complexation with Cu(II).

A high-performance liquid chromatographic method (HPLC) with UV detection is described for determination of ceftriaxone sodium (CFX) and cefotaxime sodium (CFM) content in pharmaceutical industrial wastewater. These methods are based on the detection of these antibiotics via the formation of chelate complexes with Cu(II). The developed Liquid Chromatographic method offers symmetric peak shape, good resolution and reasonable retention time for both drugs. The removal percentage reached about 100 and 92.1% at pH 7.2 for CFX and CFM, respectively. In UV detection, the removal of the chelating antibiotics were based on forming of chelate complexes with Cu(II) which detected at λmax = 253 and 244 nm for CFX and CFM, respectively. Linearity, accuracy and precision were found to be acceptable over the concentration range of 5.99-59.86 µg mL-1 for CFX and 14.33-71.63 µg mL-1 for CFM. The proposed method can be used for the quality control of industrial wastewater containing CFX and CFM.

Spectrophotometric Methods for Determination of Dopamine Hydrochloride in Bulk and in Injectable Forms.

Two highly simple, economical, accurate and sensitive spectrophotometric methods for determination of dopamine hydrochloride (DAH) in either pure form and pharmaceutical formulations are described. The first method is based on determination of (DAH) spectrophotometrically at maximum absorbance 280 nm (method A). The second one is based on reduction of alkaline KMnO4 by (DAH) leading to the formation of green manganate species which are measured at 610 nm (method B). Under optimized conditions, the calibration graphs were linear in the range of 3.793 - 45.513, 0.190 - 4.362 µg.mL-1 of (DAH) for methods A and B respectively. The developed methods were successfully applied for the determination of dopamine hydrochloride in pharmaceutical samples.

Spectrophotometric determination of Metronidazole antibacterial drug via oxidation with alkaline potassium permanganate.

Highly simple, sensitive and selective method is developed for the spectrophotometric determination of Metronidazole (MDZ) antibacterial drug either in pure form or in pharmaceutical formulations. This method is based on reduction of potassium permanganate by Metronidazole drug in sodium hydroxide solution to give green manganate ion which recorded at 610 nm. The method produced linear responses in the concentration range 4.28 - 59.91 µg mL-1 with limit of detection (LOD) and limit of quantification (LOQ) 0.21 and 0.69 µg mL-1 for Metronidazole drug respectively. The apparent molar absorptivity is 0.865 × 104 L mol-1 cm-1, Sandell sensitivity is 0.019 µg cm-2 and correlation coefficient is 0.951. The method is highly reproducible and has been applied to a wide variety of pharmaceutical formulations and the results compare favourably with those of official methods.

Using a first-derivative spectrophotometric method for simultaneous determination of Fe(II) and Ni(II) in mineral vitamins by interaction with 2,4-diamino-5-(2-hydroxy-5-nitrophenylazo)benzenesulfonic acid sodium salt in the presence of Tween 20.

A highly selective and sensitive derivative spectrophotometric method has been developed for the determination of Fe(II) and Ni(II) in different mineral vitamins. The method is based on the formation of binary complexes of Fe(II) and Ni(II) with 2,4-diamino-5-(2-hydroxy-5-nitrophenylazo) benzenesulfonic acid sodium salt (Mordant Brown 33) at pH 5.6 with Tween 20. At lambda(max) 512 and 493 nm, the molar absorbtivity was 2.09 x 10(4) and 0.58 x 10(4) L/mol cm for Fe(II) and Ni(II), respectively. Fe(II) can be determined in the range 0.55-2.79 microg/mL in the presence of 2.92 microg/mL Ni, and Ni(II) can be determined in the range 1.17-3.5 microg/mL in the presence of 2.79 microg/mL Fe(II) in the presence of Tween 20 (4%). The detection limits were 9.0 and 15.0 ng/mL for Fe(II) and Ni(II), respectively. The effect of foreign ions was elucidated. The RSD values were, in all instances, less than 1.3%. The proposed method was successfully applied for the simultaneous determination of Fe(II) and Ni(II) in different mineral vitamins.

Spectrophotometric studies on the complexation equilibria of Ni and Pb with 2-carboxy-2-hydroxy-5'-sulfo-formazylbenzene. Simultaneous determination of trace amounts of Ni and Pb.

Spectrophotometric studies have been made to investigate the reaction of Nickel and Lead with 2-carboxy-2'-hydroxy-5'-sulfoformazyl-benzene (zincon) in 50%(v/v) ethanol-water at 25 degrees C and an ionic strength of 0.1 M NaClO4. A complete picture of the complexation equilibria in the pH range (4.2-12.0) for nickel and (1.9-11.5) for lead are presented. Simple, rapid, selective and sensitive methods for the spectro-photometric determination of nickel and lead has been developed based on the color reaction of their complexes with zincon. The methods allow the determination of 4.69 microg mL(-1) of nickel at pH = 6.3 (lambdamax = 665 nm) and 10.3 microg ml(-1) of lead at pH = 5.6 (lambdamax = 610 nm). The apparent molar absorptivities were epsilon = 1.3 x 10(4) L mol(-1) cm(-1) for nickel and epsilon = 0.6 x 10(4) L mol(-1) cm(-1) for lead. The interference of a large number of foreign ions and complexing agents has been studied. Thiosulphate, as masking agent allows the simultaneous determination of nickel and lead in the presence of high concentrations of copper. Ascorbic acid, sodium cyanide and or sodium fluoride provide the elimination of many other interferences. The methods have been applied successfully to the simultaneous determination of nickel and lead in an aluminium and non-ferrous alloy.

Spectrophotometric studies on the simultaneous determination of cadmium and mercury with 4-(2-pyridylazo)-resorcinol.

A new method for direct spectrophotometric determination of cadmium with 4-(2-pyridylazo)-resorcinol is reported. Absorption maximum, molar absorptivity and Sandell's sensitivity of the 1:1 (M:L) complex are 510 nm, 2.5 x 10(5) l mol(-1) cm(-1) and 3.55 ng cm(-2), respectively. A linear calibration graph is obtained up to 4.49 microg ml(-1). The zero-crossing measurement technique is found suitable for the direct measurement of the first-derivative value at the specified wavelengths. Cadmium(II) (0.42-9.2 microg ml(-1)) and mercury(II) (0.35-7.4 microg ml(-1)) in different ratios have been determined simultaneously. A critical evaluation of the proposed method is performed by statistical analysis of the experimental data. The developed method was applied to the simultaneous spectrophotometric determination of Cd and Hg in some synthetic mixtures and was found to give satisfactory results.

Solvent effects on the electronic absorption spectra and acid strength of some substituted pyridinols.

The electronic absorption spectra of some substituted pyridinols in organic solvents of different polarities are studied. Also, the solvent effects on the intramolecular charge transfer bands are discussed using various solvent parameters. The acid-base equilibria of the compounds used are studied spectrophotometrically in various mixed aqueous solvents at 25 degrees C and 0.1 M ionic strength (NaClO4). Furthermore, the influence of the solvents on the dissociation constants and tautomeric equilibria of a pyridinol derivatives are discussed. The effect of molecular structure of the pyridinols on the pK's is also examined.