Quantum geometry quadrupole-induced third-order nonlinear transport in antiferromagnetic topological insulator MnBi2Te4.

The study of quantum geometry effects in materials has been one of the most important research directions in recent decades. The quantum geometry of a material is characterized by the quantum geometric tensor of the Bloch states. The imaginary part of the quantum geometry tensor gives rise to the Berry curvature while the real part gives rise to the quantum metric. While Berry curvature has been well studied in the past decades, the experimental investigation on the quantum metric effects is only at its infancy stage. In this work, we measure the nonlinear transport of bulk MnBi2Te4, which is a topological anti-ferromagnet. We found that the second order nonlinear responses are negligible as required by inversion symmetry, the third-order nonlinear responses are finite. The measured third-harmonic longitudinal ( V x x 3 ω ) and transverse ( V x y 3 ω ) voltages with frequency 3 ω , driven by an a.c. current with frequency ω , show an intimate connection with magnetic transitions of MnBi2Te4 flakes. Their magnitudes change abruptly as MnBi2Te4 flakes go through magnetic transitions from an antiferromagnetic state to a canted antiferromagnetic state and to a ferromagnetic state. In addition, the measured V x x 3 ω is an even function of the applied magnetic field B while V x y 3 ω is odd in B. Amazingly, the field dependence of the third-order responses as a function of the magnetic field suggests that V x x 3 ω is induced by the quantum metric quadrupole and V x y 3 ω is induced by the Berry curvature quadrupole. Therefore, the quadrupoles of both the real and the imaginary part of the quantum geometry tensor of bulk MnBi2Te4 are revealed through the third order nonlinear transport measurements. This work greatly advanced our understanding on the connections between the higher order moments of quantum geometry and nonlinear transport.

Cu/Gd co-doped hydroxyapatite/poly lactic-co-glycolic acid composites enhance MRI imaging and bone defect regeneration.

Background: The hydroxyapatite (HA)/poly(lactide-co-glycolide) acid (PLGA) composite material is a widely used orthopedic implant due to its excellent biocompatibility and plasticity. Recent advancements in cation doping have expanded its potential biological applications. However, conventional HA/PLGA composites are not visible under X-rays post-implantation and have limited osteogenic induction capabilities. Copper (Cu) is known to regulate osteoblast proliferation and differentiation, while gadolinium (Gd) can significantly enhance the magnetic resonance imaging (MRI) capabilities of materials. Methods: This study aimed to investigate whether incorporating Cu and Gd into an HA/PLGA composite could enhance the osteogenic properties, in vivo bone defect repair, and MRI characteristics. We prepared a Cu/Gd@HA/PLGA composite and assessed its performance. Results: Material characterization confirmed that Cu/Gd@HA retained the morphology and crystal structure of HA. The Cu/Gd@HA/PLGA composite exhibited excellent nuclear magnetic imaging capabilities, porosity, and hydrophilicity, which are conducive to cell adhesion and implant detection. In vitro experiments demonstrated that the Cu/Gd@HA/PLGA composite enhanced the proliferation, differentiation, and adhesion of MC3T3-E1 cells, and upregulated COL-1 and BMP-2 expression at both gene and protein levels. In vivo studies showed that the Cu/Gd@HA/PLGA composite maintained strong T1-weighted MRI signals and significantly improved the bone defect healing rate in rats. Conclusion: These findings indicate that the Cu/Gd@HA/PLGA composites significantly enhance T1-weighted MRI capabilities, promote osteoblast proliferation and differentiation in vitro, and accelerate bone defect healing in vivo.

Chrysomycins, Anti-Tuberculosis C-Glycoside Polyketides from Streptomyces sp. MS751.

A new dimeric C-glycoside polyketide chrysomycin F (1), along with four new monomeric compounds, chrysomycins G (2), H (3), I (4), J (5), as well as three known analogues, chrysomycins A (6), B (7), and C (8), were isolated and characterised from a strain of Streptomyces sp. obtained from a sediment sample collected from the South China Sea. Their structures were determined by detailed spectroscopic analysis. Chrysomycin F contains two diastereomers, whose structures were further elucidated by a biomimetic [2 + 2] photodimerisation of chrysomycin A. Chrysomycins B and C showed potent anti-tuberculosis activity against both wild-type Mycobacterium tuberculosis and a number of clinically isolated MDR M. tuberculosis strains.

HOXB9 promotes osteosarcoma cell survival and malignancy under glucose starvation via upregulating SPP1 expression.

Homeobox B9 (HOXB9) has been shown to play a critical role in several tumors. However, the precise biological mechanisms and functions of HOXB9 in osteosarcoma remain largely unknown. In this study, we found that HOXB9 was increased upon glucose starvation. Elevated HOXB9 suppressed osteosarcoma cell death and supported cell growth and migration under glucose starvation. Further mechanistic studies demonstrated that HOXB9 directly bound to the promoter of secreted phosphoprotein 1 (SPP1) and transcriptionally upregulated SPP1 expression which then led cell death decrease and cell growth increase under glucose deprivation environment. Clinically, HOXB9 was significantly upregulated in osteosarcoma compared with normal tissues and increase of HOXB9 expression was positively associated with the elevation of SPP1 in osteosarcoma. Overall, our study illustrates that HOXB9 contributes to malignancy in osteosarcoma and inhibits cell death through transcriptional upregulating SPP1 under glucose starvation.

Retraction: Strontium-doped gelatin scaffolds promote M2 macrophage switch and angiogenesis through modulating the polarization of neutrophils.

Retraction of 'Strontium-doped gelatin scaffolds promote M2 macrophage switch and angiogenesis through modulating the polarization of neutrophils' by Tao Li et al., Biomater. Sci., 2021, 9, 2931-2946, https://doi.org/10.1039/D0BM02126A.

Ectoine hyperproduction by engineered Halomonas bluephagenesis.

Ectoine, a crucial osmoprotectant for salt adaptation in halophiles, has gained growing interest in cosmetics and medical industries. However, its production remains challenged by stringent fermentation process in model microorganisms and low production level in its native producers. Here, we systematically engineered the native ectoine producer Halomonas bluephagenesis for ectoine production by overexpressing ectABC operon, increasing precursors availability, enhancing product transport system and optimizing its growth medium. The final engineered H. bluephagenesis produced 85 g/L ectoine in 52 h under open unsterile incubation in a 7 L bioreactor in the absence of plasmid, antibiotic or inducer. Furthermore, it was successfully demonstrated the feasibility of decoupling salt concentration with ectoine synthesis and co-production with bioplastic P(3HB-co-4HB) by the engineered H. bluephagenesis. The unsterile fermentation process and significantly increased ectoine titer indicate that H. bluephagenesis as the chassis of Next-Generation Industrial Biotechnology (NGIB), is promising for the biomanufacturing of not only intracellular bioplastic PHA but also small molecular compound such as ectoine.

Asymmetric edge supercurrents in MoTe2 Josephson junctions.

To investigate the higher order topology in MoTe2, the supercurrent interference phenomena in Nb/MoTe2/Nb planar Josephson junctions have been systematically studied. By analyzing the obtained interference pattern of the critical supercurrents and performing a comparative study of the edge-touched and untouched junctions, it's found that the supercurrent is dominated by the edges, rather than the bulk or surfaces of MoTe2. An asymmetric Josephson effect with a field-tunable sign is also observed, indicating the nontrivial origin of the edge states. These results not only provide initial evidence for the hinge states in the higher order topological insulator MoTe2, but also demonstrate the potential applications of MoTe2-based Josephson junctions in rectifying the supercurrent.

PHA is not just a bioplastic!

Polyhydroxyalkanoates (PHA) have evolved into versatile biopolymers, transcending their origins as mere bioplastics. This extensive review delves into the multifaceted landscape of PHA applications, shedding light on the diverse industries that have harnessed their potential. PHA has proven to be an invaluable eco-conscious option for packaging materials, finding use in films foams, paper coatings and even straws. In the textile industry, PHA offers a sustainable alternative, while its application as a carbon source for denitrification in wastewater treatment showcases its versatility in environmental remediation. In addition, PHA has made notable contributions to the medical and consumer sectors, with various roles ranging from 3D printing, tissue engineering implants, and cell growth matrices to drug delivery carriers, and cosmetic products. Through metabolic engineering efforts, PHA can be fine-tuned to align with the specific requirements of each industry, enabling the customization of material properties such as ductility, elasticity, thermal conductivity, and transparency. To unleash PHA's full potential, bridging the gap between research and commercial viability is paramount. Successful PHA production scale-up hinges on establishing direct supply chains to specific application domains, including packaging, food and beverage materials, medical devices, and agriculture. This review underscores that PHA's future rests on ongoing exploration across these industries and more, paving the way for PHA to supplant conventional plastics and foster a circular economy.

Establishing and Validating an Aging-Related Prognostic Signature in Osteosarcoma.

Aging is an inevitable process that biological changes accumulate with time and results in increased susceptibility to different tumors. But currently, aging-related genes (ARGs) in osteosarcoma were not clear. We investigated the potential prognostic role of ARGs and established an ARG-based prognostic signature for osteosarcoma. The transcriptome data and corresponding clinicopathological information of patients with osteosarcoma were obtained from The Cancer Genome Atlas (TCGA) and Gene Expression Omnibus (GEO) databases. Molecular subtypes were generated based on prognosis-related ARGs obtained from univariate Cox analysis. With ARGs, a risk signature was built by univariate, least absolute shrinkage and selection operator (LASSO), and multivariate Cox regression analyses. Differences in clinicopathological features, immune infiltration, immune checkpoints, responsiveness to immunotherapy and chemotherapy, and biological pathways were assessed according to molecular subtypes and the risk signature. Based on risk signature and clinicopathological variables, a nomogram was established and validated. Three molecular subtypes with distinct clinical outcomes were classified based on 36 prognostic ARGs for osteosarcoma. A nine-ARG-based signature in the TCGA cohort, including BMP8A, CORT, SLC17A9, VEGFA, GAL, SSX1, RASGRP2, SDC3, and EVI2B, has been created and developed and could well perform patient stratification into the high- and low-risk groups. There were significant differences in clinicopathological features, immune checkpoints and infiltration, responsiveness to immunotherapy and chemotherapy, cancer stem cell, and biological pathways among the molecular subtypes. The risk signature and metastatic status were identified as independent prognostic factors for osteosarcoma. A nomogram combining ARG-based risk signature and metastatic status was established, showing great prediction accuracy and clinical benefit for osteosarcoma OS. We characterized three ARG-based molecular subtypes with distinct characteristics and built an ARG-based risk signature for osteosarcoma prognosis, which could facilitate prognosis prediction and making personalized treatment in osteosarcoma.

NUCKS1, a LINC00629-upregulated gene, facilitated osteosarcoma progression and metastasis by elevating asparagine synthesis.

Nuclear ubiquitous casein and cyclin-dependent kinase substrate 1 (NUCKS1) has been reported to play an oncogenic role in several cancers. However, the biological functions and regulatory mechanism of NUCKS1 in osteosarcoma have not been fully understood. In this study, we reported that NUCKS1 was significantly increased in osteosarcoma. Depletion of NUCKS1 decreased osteosarcoma cell proliferation and metastasis in vivo and in vitro. Overexpression of NUCKS1 accelerated osteosarcoma cell aggressiveness. Mechanistically, NUCKS1 facilitated asparagine (Asn) synthesis by transcriptionally upregulating asparagine synthetase (ASNS) expression and elevating the levels of Asn in osteosarcoma cells, leading to increased cell growth and metastasis. Inhibition of ASNS or reduction of Asn decreased osteosarcoma cell aggressiveness and impaired the promoting effects of NUCKS1 on tumorigenesis and metastasis. Furthermore, we also found that by acting as a sponge for miR-4768-3p, LINC00629 promoted NUCKS1 expression. Collectively, our findings highlight the role of NUCKS1 in regulating asparagine metabolism and reveal that LINC00629 is an important regulator of NUCKS1 that contributes to NUCKS1 upregulation in osteosarcoma.

[The degradation of plastics and the production of polyhydroxyalkanoates (PHA)].

In recent years, the petroleum-based plastic pollution problem has been causing global attention. The idea of "degradation and up-cycling of plastics" was proposed for solving the environmental pollution caused by non-degradable plastics. Following this idea, plastics would be firstly degraded and then reconstructed. Polyhydroxyalkanoates (PHA) can be produced from the degraded plastic monomers as a choice to recycle among various plastics. PHA, a family of biopolyesters synthesized by many microbes, have attracted great interest in industrial, agricultural and medical sectors due to its biodegradability, biocompatibility, thermoplasticity and carbon neutrality. Moreover, the regulations on PHA monomer compositions, processing technology, and modification methods may further improve the material properties, making PHA a promising alternative to traditional plastics. Furthermore, the application of the "next-generation industrial biotechnology (NGIB)" utilizing extremophiles for PHA production is expected to enhance the PHA market competitiveness, promoting this environmentally friendly bio-based material to partially replace petroleum-based products, and achieve sustainable development with carbon-neutrality. This review summarizes the basic material properties, plastic upcycling via PHA biosynthesis, processing and modification methods of PHA, and biosynthesis of novel PHA.

Exploring the nonlinear piezoresistive effect of 4H-SiC and developing MEMS pressure sensors for extreme environments.

Microelectromechanical system (MEMS) pressure sensors based on silicon are widely used and offer the benefits of miniaturization and high precision. However, they cannot easily withstand high temperatures exceeding 150 °C because of intrinsic material limits. Herein, we proposed and executed a systematic and full-process study of SiC-based MEMS pressure sensors that operate stably from -50 to 300 °C. First, to explore the nonlinear piezoresistive effect, the temperature coefficient of resistance (TCR) values of 4H-SiC piezoresistors were obtained from -50 to 500 °C. A conductivity variation model based on scattering theory was established to reveal the nonlinear variation mechanism. Then, a piezoresistive pressure sensor based on 4H-SiC was designed and fabricated. The sensor shows good output sensitivity (3.38 mV/V/MPa), accuracy (0.56% FS) and low temperature coefficient of sensitivity (TCS) (-0.067% FS/°C) in the range of -50 to 300 °C. In addition, the survivability of the sensor chip in extreme environments was demonstrated by its anti-corrosion capability in H2SO4 and NaOH solutions and its radiation tolerance under 5 W X-rays. Accordingly, the sensor developed in this work has high potential to measure pressure in high-temperature and extreme environments such as are faced in geothermal energy extraction, deep well drilling, aeroengines and gas turbines.

Predictive value of gut microbiota in long-term blood pressure control: a cross-sectional study.

OBJECTIVES: To investigate the prediction of long-term blood pressure control using the intestinal flora of patients with hypertension. METHODS: A total of 125 patients with primary grade-2 hypertension who attended the cardiovascular department of Hebei Province Hospital of Chinese Medicine between April 2021 and April 2022 were enrolled; these included 65 patients with substandard long-term blood pressure control (the uncontrolled group) and 60 patients with standard long-term blood pressure control (the controlled group). General clinical data and data on morning stools and diet were recorded for all the enrolled patients. The 16 s rDNA sequencing of faecal intestinal flora was also performed to analyse the differences in intestinal flora between the two groups of patients and to investigate the relationship between blood pressure compliance and the presence of flora. RESULTS: The intestinal flora of the two groups of patients differed in terms of the Firmicutes-Bacteroidetes ratio (F/B), α-diversity analysis (Chao1, ACE and Shannon) results and ß-diversity analysis results. At the genus level, the number of Streptococcus and Paraprevotella in patients in the uncontrolled group was greater than that of the controlled group, and the level of Akkermansia and Bifidobacterium was lower than that in the controlled group. A logistic regression analysis of the difference factors found differences in ACE, F/B, Streptococcus, Paraprevotella and Akkermansia in the two groups; these differences remained after correcting for age, gender and body mass index. The receiver operating characteristic curves revealed the following: ACE (area under the curve [AUC] = 85.282), Streptococcus (AUC = 82.705), Akkermansia (AUC = 77.333), Paraprevotella (AUC = 66.154) and F/B (AUC = 60.436). CONCLUSIONS: There were significant differences in the intestinal flora of the patients in the controlled blood group compared with that of the uncontrolled group. Therefore, the ACE, genus levels of Streptococcus and Akkermansia could provide some prediction of late blood pressure compliance or non-compliance in patients with hypertension.

Regeneration of Humeral Head Using a 3D Bioprinted Anisotropic Scaffold with Dual Modulation of Endochondral Ossification.

Tissue engineering is theoretically thought to be a promising method for the reconstruction of biological joints, and thus, offers a potential treatment alternative for advanced osteoarthritis. However, to date, no significant progress is made in the regeneration of large biological joints. In the current study, a biomimetic scaffold for rabbit humeral head regeneration consisting of heterogeneous porous architecture, various bioinks, and different hard supporting materials in the cartilage and bone regions is designed and fabricated in one step using 3D bioprinting technology. Furthermore, orchestrated dynamic mechanical stimulus combined with different biochemical cues (parathyroid hormone [PTH] and chemical component hydroxyapatite [HA] in the outer and inner region, respectively) are used for dual regulation of endochondral ossification. Specifically, dynamic mechanical stimulus combined with growth factor PTH in the outer region inhibits endochondral ossification and results in cartilage regeneration, whereas dynamic mechanical stimulus combined with HA in the inner region promotes endochondral ossification and results in efficient subchondral bone regeneration. The strategy established in this study with the dual modulation of endochondral ossification for 3D bioprinted anisotropic scaffolds represents a versatile and scalable approach for repairing large joints.

Whole-genome analysis revealed the growth-promoting mechanism of endophytic bacterial strain Q2H1 in potato plants.

Introduction: Endophytes are non-pathogenic inhabitants of healthy plant tissues and have been found to promote plant growth and health. The endophytic bacterial strain Q2H1 was isolated from the roots of the potato and was identified to exhibit growth-promoting effects in potato plants. Methods: Whole-genome sequencing was performed to reveal the mechanism underlying its growth-promoting effect. The obtained sequencing data of approximately 5.65 MB encompassed 5,533 coding sequences. Of note, nine secondary metabolite gene clusters, including siderophore gene clusters, closely associated with plant growth promotion (PGP) were predicted by antiSMASH software. Comparative genomic analysis revealed that Q2H1 belongs to the genus Peribacillus. By gene function annotation, those genes related to plant growth-promoting activities, including indole-3-acetic acid (IAA) synthesis in tryptophan metabolism, siderophore biosynthetic activity, phosphate solubilization, nitrogen fixation, and related genes, were summarized. IAA (14.4 µg/ml) was presumptively produced by Q2H1 using the Salkowski colorimetric method. A total of five genes, namely, phoU, pstB, pstA1, pstC, and pstS, were annotated for phosphate solubilization, which is associated with the ability of the Q2H1 strain to solubilize phosphate under in vitro conditions. Results: It is revealed that genes in the Q2H1 genome associated with nitrogen fixation belonged to three groups, namely, nitrogen fixation (nifU, sufU, salA, and nifS), nitrogen metabolism (nirA, nrtB, and nasA), and glutamate synthesis (glnA, gltB, gltD, and gudB), supported by evidence that Q2H1 grew on medium without nitrogen. We have also identified a siderophore gene cluster located on the chromosome of Q2H1, including seven genes (viz., rbsR, rhbf, rhbE, rhbD, rhbC, rhbA, ddc, and an unknown gene). In the in vitro assay, a prominent brown circle around the colony was produced on the chrome azurol S medium at 48 and 72 h post-inoculation, indicating that the siderophore gene cluster in Q2H1 harbored the ability to produce siderophores. Conclusion: In summary, these findings implied that identifying strain-specific genes for their metabolic pathways in bacterial endophytes may reveal a variety of significant functions of plant growth-promoting mechanisms.

Bioinformatics Analysis Reveals an Association between Autophagy, Prognosis, Tumor Microenvironment, and Immunotherapy in Osteosarcoma.

Autophagy is a catabolic pathway involved in the regulation of bone homeostasis. We explore clinical correlation of autophagy-related key molecules to establish risk signature for predicting the prognosis, tumor microenvironment (TME), and immunotherapy response of osteosarcoma. Single cell RNA sequencing data from GSE162454 dataset distinguished malignant cells from normal cells in osteosarcoma. Autophagy-related genes (ARGs) were extracted from the established risk signature of the Molecular Signatures Database of Gene Set Enrichment Analysis (GSEA) by univariate Cox and least absolute shrinkage and selection operator (LASSO) Cox regression analysis. Overall survival (OS), TME score, abundance of infiltrating immune cells, and response to immune-checkpoint blockade (ICB) treatment in patients with different risks were compared based on risk score. Nine ARGs were identified and risk signature was constructed. In all osteosarcoma datasets, the OS was significantly longer in the high-risk patients than low-risk onset. Risk signature significantly stratified clinical outcomes, including OS, metastatic status, and survival status. Risk signature was an independent variable for predicting osteosarcoma OS and showed high accuracy. A nomogram based on risk signature and metastases was developed. The calibration curve confirmed the consistency in 1-year, 3-year, and 5-year predicted OS and the actual OS. The risk score was related to 6 kinds of T cells and macrophages, myeloid-derived suppressor cell, natural killer cell, immune score, and stromal score in TME. The risk signature helped in predicting patients' response to anti-PD1/anti-PD-L1 treatment. The ARGs-led risk signature has important value for survival prediction, risk stratification, tumor microenvironment, and immune response evaluation of osteosarcoma.

Pulmonary tuberculosis screening in emigrants and travellers: A retrospective analysis of Guangzhou Port in China.

BACKGROUND: China is beginning to transform from a migrant exporting country to a migrant importing country. Our study aimed to assess risks of imported tuberculosis among travellers and to determine risk factors, to tailor institutional guidelines. METHODS: We conducted an observational, retrospective, population-based cohort study. Molecular epidemiology surveillance methods were used to screen travellers for cases of pulmonary tuberculosis (PTB) at Guangzhou Port in China from January 2010 to December 2016. RESULTS: A total of 165,369 travellers from 190 countries and regions were screened for PTB. The rate of suspected PTB, laboratory confirmed rate, and the total detection rate in emigrants were significantly higher than those in travellers (p<0.01). There were four differences in the PTB screening process between emigrants and travellers. According to the transmission risk degree of the tuberculosis, forty high-risk PTB importing countries were divided into five levels. The travellers diagnosed with PTB were significantly younger than the emigrants (p<0.01). The distribution of genotypes differed significantly between the travellers and emigrants (p<0.001). CONCLUSIONS: PTB screening process in travellers at ports should include a risk assessment of high-risk groups. It should reduce diagnosis time by rapid molecular detection methods and strengthen drug resistant (DR) transmission and monitoring of imported PTB strains through molecular genotyping at ports.

Improved volume variable cluster model method for crystal-lattice optimization: effect on isotope fractionation factor.

The isotopic fractionation factor and element partition coefficient can be calculated only after the geometric optimization of the molecular clusters is completed. Optimization directly affects the accuracy of some parameters, such as the average bond length, molecular volume, harmonic vibrational frequency, and other thermodynamic parameters. Here, we used the improved volume variable cluster model (VVCM) method to optimize the molecular clusters of a typical oxide, quartz. We documented the average bond length and relative volume change. Finally, we extracted the harmonic vibrational frequencies and calculated the equilibrium fractionation factor of the silicon and oxygen isotopes. Given its performance in geometrical optimization and isotope fractionation factor calculation, we further applied the improved VVCM method to calculate isotope equilibrium fractionation factors of Cd and Zn between the hydroxide (Zn-Al layered double hydroxide), carbonate (cadmium-containing calcite) and their aqueous solutions under superficial conditions. We summarized a detailed procedure and used it to re-evaluate published theoretical results for cadmium-containing hydroxyapatite, emphasizing the relative volume change for all clusters and confirming the optimal point charge arrangement (PCA). The results showed that the average bond length and isotope fractionation factor are consistent with those published in previous studies, and the relative volume changes are considerably lower than the results calculated using the periodic boundary method. Specifically, the average Si-O bond length of quartz was 1.63 Å, and the relative volume change of quartz centered on silicon atoms was  - 0.39%. The average Zn-O bond length in the Zn-Al-layered double hydroxide was 2.10 Å, with a relative volume change of 1.96%. Cadmium-containing calcite had an average Cd-O bond length of 2.28 Å, with a relative volume change of 0.45%. At 298 K, the equilibrium fractionation factors between quartz, Zn-Al-layered double hydroxide, cadmium-containing calcite, and their corresponding aqueous solutions were [Formula: see text], [Formula: see text], [Formula: see text] and [Formula: see text] respectively. These results strongly support the reliability of the improved VVCM method for geometric optimization of molecular clusters.