Properties of EPDM Nanocomposites Reinforced with Modified Montmorillonite.

Considering the dilemma of obtaining economic and high-performance composites based on non-polar and main-chain-saturated ethylene propylene diene monomer rubber (EPDM), we proposed an effective and universal filler modification and nanocomposite preparation method. Specifically, the montmorillonite (MMT) surface was coated with polydopamine (PDA) to obtain DMMT, which was confirmed by XRD, XPS, FTIR, and TGA. After compounding DMMT gel with the solid EPDM via the gel compounding method, a silane coupling agent, vinyltrimethoxysilane, was introduced to construct covalent interactions between rubber and filler. Compared with the unmodified MMT filler EPDM, the EPDM/DMMT nanocomposite showed much fewer filler aggregates in the matrix. The highest tensile strength of the composites reached 6.5 MPa with 10 phr DMMT, almost 200% higher than that of pure EPDM.

Effect of Fluorosilicone Rubber on Mechanical Properties, Dielectric Breakdown Strength and Hydrophobicity of Methyl Vinyl Silicone Rubber.

Silicone rubber (SIR) is used in high-voltage insulators because of its insulation, and excellent hydrophobicity is very important in harsh outdoor environments. To enhance the hydrophobicity and low-temperature resistance of silicone rubber, methyl vinyl silicone rubber and fluorosilicone rubber (FSIR) blend composites with different ratios were prepared. The samples were characterized and analyzed using scanning electron microscopy, tensile testing, dynamic mechanical analysis and static contact angle testing. The results showed that after blending, SIR and FSIR were well compatible. FSIR had higher elastic modulus and reduced the tensile strength to some extent in SIR/FSIR composites. The addition of a small amount of FSIR made its crystallization temperature decrease from -30 to -45 °C, meaning that the low-temperature resistance was significantly improved. The breakdown strength of SIR/FSIR composites can still be maintained at a high level when a small amount of FSIR is added. The contact angle of the composites increased from 108.9 to 115.8° with the increase in FSIR content, indicating the enhanced hydrophobicity. When the samples were immersed in water for 96 h, the hydrophobicity migration phenomenon occurred. The static contact angle of the samples with less FSIR content had a weaker decreasing trend, which illustrated that the hydrophobicity was maintained at a high level.

The Influence of Syringic Acid and Erucic Acid on the Antioxidant Properties of Natural Rubber: Experimental and Molecular Simulation Investigations.

In this work, the influence of syringic acid (SA) and erucic acid (EA) on the oxidation resistance of natural rubber (NR) was investigated by combining experimental and computational methods. The antioxidant activities of SA and EA were predicted by calculating the enthalpy of bond dissociation (BDE), the anti-migration ability of antioxidants (AOs) in the rubber matrix by calculating the mean square displacement (MSD), and the effect of antioxidants on oxygen barrier properties of rubber materials by calculating the permeability coefficient (P). The predicted result is that EA has a better comprehensive performance than SA. The DPPH (2,2-diphenyl-1-picrylhydrazyl) test and mechanical properties test demonstrated the results predicted by the simulations. Both SA and EA can protect natural rubber, while EA has a better comprehensive effect.

Research Progress on Two-Dimensional Layered MXene/Elastomer Nanocomposites.

Two-dimensional (2D) transition-metal carbon/nitrogen/carbon nitride (MXene) has extremely high conductivity and easily modifiable surface functional groups. Compared with graphene, another 2D layered material, MXene is easily dispersed in water owing to its hydrophilic groups. Its unique characteristics make MXene a valuable material. Nanocomposites can be endowed with functionality when MXene is compounded with an elastomer. Particularly in electromagnetic interference shielding and sensing, MXene exhibits extraordinary properties. We review various preparation methods, properties, and applications of MXene and MXene/elastomer nanocomposites and present a summary of the prospects for MXene/elastomer nanocomposites, which are in their initial stage of development and providing promising results.

Study on Thermal-Oxidative Aging Properties of Ethylene-Propylene-Diene Monomer Composites Filled with Silica and Carbon Nanotubes.

In this work, a small amount of carbon nanotubes (CNTs) was used to partially replace the silica in ethylene-propylene-diene monomer (EPDM) to prepare EPDM composites via mechanical blending. The mechanical properties, thermal-oxidative aging properties and thermal stability of the composites were systematically investigated. The results showed that with the increase of CNTs content, the Shore A hardness and stress at 100% strain of the composites increased, while the elongation at break decreased. With the aging time increasing, the aging coefficient and elongation at break of composites decreased while hardness increased due to the raise of crosslinking density. In addition, evidences were found to demonstrate the improved aging resistance by adding CNTs in the EPDM composites, including the less change in Shore A hardness, the smaller change ratio of elongation at break and the lower aging coefficient. When the content of CNTs reached 10 phr, the aging coefficient of the EPDM composite aged for 168 h was nearly twice that of the composite without CNTs, and the thermal stability of the EPDM composite with CNTs was improved as demonstrated by thermal analysis.

Improved Dielectric Breakdown Strength of Polyimide by Incorporating Polydopamine-Coated Graphitic Carbon Nitride.

Breakdown strength is an important parameter for polymer dielectric, and introducing inorganic filler into the polymer matrix is an efficient method to improve the breakdown strength. In this work, graphitic carbon nitride nanosheets (CNNS) were ultrasonically exfoliated and coated with polydopamine to obtain modified nanosheets (DCNNS), and then polyimide (PI) composite films with various CNNS and DCNNS were prepared and compared. Owing to the abundant hydroxyl groups of polydopamine, good filler-polymer compatibility and uniform filler dispersion were achieved for PI/DCNNS composites. Both breakdown strength and dielectric constant were improved with the addition of either CNNS or DCNNS. However, at the same filler content, the PI/DCNNS composites exhibited higher breakdown strength and dielectric constant than the PI/CNNS. The PI composite with 0.5 wt% DCNNS showed the highest breakdown strength of ~300 kV/mm, increased by 67.6% as compared to the pure PI, while the PI/CNNS composite with the same filler content only increased by 14.5%.

Analysis of the Electrical and Thermal Properties for Magnetic Fe3O4-Coated SiC-Filled Epoxy Composites.

Orderly arranged Silicon carbide (SiC)/epoxy (EP) composites were fabricated. SiC was made magnetically responsive by decorating the surface with iron oxide (Fe3O4) nanoparticles. Three treatment methods, including without magnetization, pre-magnetization and curing magnetization, were used to prepare SiC/EP composites with different filler distributions. Compared with unmodified SiC, magnetic SiC with core-shell structure was conducive to improve the breakdown strength of SiC/EP composites and the maximum enhancement rate was 20.86%. Among the three treatment methods, SiC/EP composites prepared in the curing-magnetization case had better comprehensive properties. Under the action of magnetic field, magnetic SiC were orderly oriented along the direction of an external field, thereby forming SiC chains. The magnetic alignment of SiC restricted the movement of EP macromolecules or polar groups to some extent, resulting in the decrease in the dielectric constant and dielectric loss. The SiC chains are equivalent to heat flow channels, which can improve the heat transfer efficiency, and the maximum improvement rate was 23.6%. The results prove that the orderly arrangement of SiC had a favorable effect on dielectric properties and thermal conductivity of SiC/EP composites. For future applications, the orderly arranged SiC/EP composites have potential for fabricating insulation materials in the power electronic device packaging field.

Anchoring Water Soluble Phosphotungstic Acid by Hybrid Fillers to Construct Three-Dimensional Proton Transport Networks.

Phosphotungstic acid (HPW)-filled composite proton exchange membranes possess high proton conductivity under low relative humidity (RH). However, the leaching of HPW limits their wide application. Herein, we propose a novel approach for anchoring water soluble phosphotungstic acid (HPW) by polydopamine (PDA) coated graphene oxide and halloysite nanotubes (DGO and DHNTs) in order to construct hybrid three-dimensional proton transport networks in a sulfonated poly(ether ether ketone) (SPEEK) membrane. The introduction of PDA on the surfaces of the hybrid fillers could provide hydroxyl groups and secondary amine groups to anchor HPW, resulting in the uniform dispersion of HPW in the SPEEK matrix. The SPEEK/DGO/DHNTs/HPW (90/5/5/60) composite membrane exhibited higher water uptake and much better conductivity than the SPEEK membrane at low relative humidity. The best conductivity reached wass 0.062 S cm-1 for the composite membrane, which is quite stable during the water immersion test.

Performance of Silicone Rubber Composites Filled with Aluminum Nitride and Alumina Tri-Hydrate.

In this study, silicone rubber (SR) composites were prepared with various amounts of aluminum nitride (AlN) and alumina tri-hydrate (ATH), and vinyl tri-methoxysilane (VTMS) was also introduced to prepare SR/ATH/AlN-VTMS composites for comparison. Compared to the SR/ATH composites, the SR/ATH/AlN composites with higher AlN loading exhibited higher breakdown strength and thermal conductivity, which were further improved by the addition of VTMS. Such results were related to the enhanced rubber-filler interfacial interactions from VTMS coupling, as demonstrated by scanning electron microscopy (SEM) analysis and the curing behaviors of the SR composites. Moreover, by replacing ATH with VTMS-coupled AlN, the SR/ATH/AlN-VTMS composites also exhibited lower dielectric loss along with an increased dielectric constant, suggesting the promising application of VTMS-coupled AlN as a filler for the preparation of the SR composites as high-voltage insulators.

Silicone Rubber Composites with High Breakdown Strength and Low Dielectric Loss Based on Polydopamine Coated Mica.

High breakdown strength and low dielectric loss are necessary for the outdoor insulator using silicone rubber (SR) composites. In this work, polydopamine coated mica (mica-PDA) was synthesized via bioinspired dopamine self-polymerization, and mica-PDA-filled SR composite (SR/mica-PDA-VTMS) was prepared using vinyl tri-methoxysilane (VTMS) as a silane coupling agent which serves as the molecular bridges between the organic rubber and the inorganic filler. The SR/mica-PDA-VTMS composite demonstrated dense and uniform morphology where the filler was well dispersed. Due to the strong interfacial interactions between filler and rubber, the SR/mica-PDA-VTMS composite exhibits much lower dielectric loss compared to the other mica-filled SR composites, which was comparable to the prepared alumina-tri-hydrate-filled SR composites. Moreover, the breakdown strength of ~31.7 kV/mm and tensile strength of 5.4 MPa were achieved for the SR/mica-PDA-VTMS composite, much higher than those of the other as-prepared SR composites.

Mechanical, Thermal, and Electrical Properties of BN-Epoxy Composites Modified with Carboxyl-Terminated Butadiene Nitrile Liquid Rubber.

Filled high thermal conductivity epoxy composite solves the problem of the low thermal conductivity of the epoxy resin itself, but the addition of the thermal conductive filler reduces the mechanical properties of the composite, which limits its application in the field of high voltage insulation. In this work, carboxyl-terminated butadiene nitrile liquid rubber (CTBN) was used to toughen the boron nitride-epoxy hybrid system, and the effects of different contents of CTBN on the mechanical properties, thermal conductivity, glass transition temperature, thermal stability, and dielectric properties of the composites were investigated. The results showed that when the content of CTBN was 5-15 wt.%, the CTBN formed a dispersed island structure in the epoxy resin matrix. The toughness of the composite increased by about 32%, the breakdown strength was improved, and the thermal conductivity was about 160% higher than that of pure epoxy resin. As the CTBN content increased, the glass transition temperature and thermal stability of the composite decreased and the dielectric constant and the dielectric loss increased. When the CTBN content is 10-15 wt.%, a toughened epoxy composite material with better comprehensive properties is obtained.

Enhanced Proton Conductivity in Sulfonated Poly(ether ether ketone) Membranes by Incorporating Sodium Dodecyl Benzene Sulfonate.

It is of great importance to improve the proton conductivity of proton exchange membranes by easy-handling and cost-efficient approaches. In this work, we incorporated a commercially obtained surfactant, sodium dodecyl benzene sulfonate (SDBS), into sulfonated poly(ether ether ketone) (SPEEK) through solution casting to prepare SPEEK/SDBS membranes. When no more than 10 wt % SDBS was added, the SDBS was well dissolved into the SPEEK matrix, and the activation energy for the proton transfer in the SPEEK/SDBS membranes was greatly reduced, leading to significant enhancement of the membrane proton conductivity. Compared with the SPEEK control membrane, the SPEEK/SDBS membrane with 10 wt % SDBS showed a 78% increase in proton conductivity, up from 0.051 S cm-1 to 0.091 S cm-1, while the water uptake increased from 38% to 62%. Moreover, the SPEEK/SDBS membrane exhibited constant proton conductivity under a long-term water immersion test.

Structure and Mechanical Performance of Poly(vinyl Alcohol) Nanocomposite by Incorporating Graphitic Carbon Nitride Nanosheets.

Owing to the high aspect ratio, the two-dimensional (2D) inorganic nanofillers have attracted extensive interest in the field of polymer reinforcement. In this work, graphitic carbon nitride (g-C3N4) nanosheets were obtained via thermal condensation of melamine and were then ultrasonically exfoliated in water, which was confirmed by atomic force microscopy (AFM) and TEM. Poly(vinyl alcohol) (PVA)/g-C3N4 nanocomposites were achieved by solution casting using water as the solvent. The structure and mechanical performance of PVA/g-C3N4 nanocomposites were studied. It was found that the g-C3N4 nanosheets were well dispersed in the PVA matrix. The introduction of g-C3N4 nanosheets increased the glass transition temperature and crystallinity of the nanocomposites, leading to the improved mechanical performance. Compared with the pure PVA, the PVA/g-C3N4 nanocomposite with 0.50 wt% g-C3N4 nanosheets showed ~70.7% enhancement in tensile strength, up from 51.2 MPa to 87.4 MPa.

Effect of Sulfonation Degree and PVDF Content on the Structure and Transport Properties of SPEEK/PVDF Blend Membranes.

Sulfonated poly (ether ether ketone) (SPEEK) with four different sulfonation degrees (SDs) were prepared, and mixed with polyvinylidene fluoride (PVDF) to prepare four series of SPEEK/PVDF blend membranes. The miscibility between SPEEK and PVDF was investigated by observing the micro-morphologies. The miscible blend membranes were found in the SPEEK/PVDF blend membranes in which either SPEEK had relatively low SD or consisted of low content of one component (either SPEEK or PVDF). The PVDF crystallinity was found to decrease in the SPEEK/PVDF membranes that had better blend miscibility. With the increase of PVDF content, all the blend membranes exhibited the decreased proton conductivity and methanol permeability, and the miscible blend membranes decreased more slowly than the immiscible ones.

Thermal Conductivity Performance of Polypropylene Composites Filled with Polydopamine-Functionalized Hexagonal Boron Nitride.

Mussel-inspired approach was attempted to non-covalently functionalize the surfaces of boron nitride (BN) with self-polymerized dopamine coatings in order to reduce the interfacial thermal barrier and enhance the thermal conductivity of BN-containing composites. Compared to the polypropylene (PP) composites filled with pristine BN at the same filler content, thermal conductivity was much higher for those filled with both functionalized BN (f-BN) and maleic anhydride grafted PP (PP-g-ma) due to the improved filler dispersion and better interfacial filler-matrix compatibility, which facilitated the development of more thermal paths. Theoretical models were also applied to predict the composite thermal conductivity in which the Nielsen model was found to fit well with the experimental results, and the estimated effective aspect ratio of fillers well corresponded to the degree of filler aggregation as observed in the morphological study.

Knockdown of GCF2/LRRFIP1 by RNAi causes cell growth inhibition and increased apoptosis in human hepatoma HepG2 cells.

BACKGROUND: GC-binding factor 2 (GCF2) is a transcriptional regulator that represses transcriptional activity of the epidermal growth factor receptor (EGFR) by binding to a specific GC-rich sequence in the EGFR gene promoter. In addition to this function, GCF2 has also been identified as a tumor-associated antigen and regarded as a potentially valuable serum biomarker for early human hepatocellular carcinoma (HCC) diagnosis. GCF2 is high expressed in most HCC tissues and cell lines including HepG2. This study focused on the influence of GCF2 on cell proliferation and apoptosis in HepG2 cells. MATERIALS AND METHODS: GCF2 expression at both mRNA and protein levels in HepG2 cells was detected with reverse transcription (RT) PCR and Western blotting, respectively. RNA interference (RNAi) technology was used to knock down GCF2 mRNA and protein expression. Afterwards, cell viability was analyzed with a Cell Counting Kit-8 (CCK-8), and cell apoptosis and caspase 3 activity by flow cytometry and with a Caspase 3 Activity Kit, respectively. RESULTS: Specific down-regulation of GCF2 expression caused cell growth inhibition, and increased apoptosis and caspase 3 activity in HepG2 cells. CONCLUSIONS: These primary results suggest that GCF2 may influence cell proliferation and apoptosis in HepG2 cells, and also provides a molecular basis for further investigation into the possible mechanism at proliferation and apoptosis in HCC.

Efficient quantum dot light-emitting diodes with solution-processable molybdenum oxide as the anode buffer layer.

Quantum dot light-emitting diodes (QD-LEDs) are characterized by pure and saturated emission colors with narrow bandwidth. Optimization of the device interface is an effective way to achieve stable and high-performance QD-LEDs. Here we utilized solution-processed molybdenum oxide (MoOx) as the anode buffer layer on ITO to build efficient QD-LEDs. Using MoOx as the anode buffer layer provides the QD-LED with good Ohmic contact and a small charge transfer resistance. The device luminance is nearly independent of the thickness of the MoOx anode buffer layer. The QD-LEDs with a MoOx anode buffer layer exhibit a maximum luminance and luminous efficiency of 5230 cd m(-2) and 0.67 cd A(-1) for the yellow emission at 580 nm, and 7842 cd m(-2) and 1.49 cd A(-1) for the red emission at 610 nm, respectively.

[Construction of eukaryotic expression vector encoding ACRBP and its expression in hepatocarcinoma cells].

AIM: To construct the eukaryotic expression vector pEGFP-N1/ACRBP and stably express ACRBP in human hepatocarcinoma cells, providing functional clues for ACRBP. METHODS: A recombinant plasmid pMAL-C2/ACRBP was used as a template to amplify ACRBP cDNA. The PCR product was ligated into an eukaryotic expression vector pEGFP-N1 to construct a recombinant plasmid pEGFP-N1/ACRBP. Then the pEGFP-N1/ACRBP was transfected by Fugene HD into ACRBP-negative HepG2 cells. The stably transfected clones were selected by G418. RT-PCR and immunohistochemistry were used to detect the expression of ACRBP in HepG2 cells. RESULTS: The eukaryotic expression vector pEGFP-N1/ACRBP was constructed and confirmed by sequencing. The stably transfected HepG2 cells expressed ACRBP. CONCLUSION: The eukaryotic expression vector pEGFP-N1/ACRBP has been successfully constructed and transfected into HepG2 cells, resulting in stable expression of ACRBP.

The preparation of an elastomer/silicate layer nanocompound with an exfoliated structure and a strong ionic interfacial interaction by utilizing an elastomer latex containing pyridine groups.

A great variety of polymer/layered silicate (PLS) nanocomposites have been reported, however, there are few exfoliated PLS nanocomposites and their inorganic-organic interfaces are still a great problem, especially for the elastomers. In this research, a kind of exfoliated elastomer/silicate layer nanocompound was prepared and proved by XRD and TEM, in which 10 phr Na(+)-montmorillonite was dispersed in butadiene-styrene-vinyl pyridine rubber by latex compounding method with acidic flocculants. Moreover, a dynamic mechanical thermal analyzer (DMTA) suggested a strong interfacial interaction (interaction parameter B(H) = 4.91) between the silicate layers and macromolecules in addition to the weak inorganic-organic interfacial interaction, and solid state (15)N NMR indicated the formation of a strong ionic interface through the acidifying pyridine. Subsequently, a remarkable improvement of the dispersing morphology, mechanical performance and gas barrier property appeared, compared to that using calcium ion flocculants. This supports the formation of an exfoliated structure and an improved interfacial interaction.